only:cleaner guards

firmware/console/eficonsole.cpp

@@ -51,7 +51,7 @@ static void sayHello() {
 	efiPrintf(PROTOCOL_HELLO_PREFIX " with OPENBLT");
 #endif
 
-#if ENABLE_AUTO_DETECT_HSE
+#if EFI_PROD_CODE && ENABLE_AUTO_DETECT_HSE
 	extern float hseFrequencyMhz;
 	extern uint8_t autoDetectedRoundedMhz;
 	efiPrintf(PROTOCOL_HELLO_PREFIX " detected HSE clock %.2f MHz PLLM = %d", hseFrequencyMhz, autoDetectedRoundedMhz);

firmware/hw_layer/drivers/gpio/l9779.cpp

@@ -31,7 +31,7 @@
 
 #include "gpio/l9779.h"
 
-#if (BOARD_L9779_COUNT > 0)
+#if EFI_PROD_CODE && (BOARD_L9779_COUNT > 0)
 
 #include "persistent_configuration.h"
 #include "hardware.h"

firmware/hw_layer/drivers/gpio/mc33810.cpp

@@ -23,7 +23,7 @@
 #include "gpio/gpio_ext.h"
 #include "gpio/mc33810.h"
 
-#if (BOARD_MC33810_COUNT > 0)
+#if EFI_PROD_CODE && (BOARD_MC33810_COUNT > 0)
 
 /*
  * TODO list:

firmware/hw_layer/drivers/gpio/tle9104.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#if BOARD_TLE9104_COUNT > 0
+#if EFI_PROD_CODE && BOARD_TLE9104_COUNT > 0
 
 struct tle9104_config {
 	SPIDriver		*spi_bus;

firmware/hw_layer/smart_gpio.cpp

@@ -276,7 +276,7 @@ void initSmartGpio() {
 	}
 #endif /* (BOARD_TLE8888_COUNT > 0) */
 
-#if (BOARD_DRV8860_COUNT > 0)
+#if EFI_PROD_CODE && (BOARD_DRV8860_COUNT > 0)
 	if (isBrainPinValid(engineConfiguration->drv8860_cs)) {
 		drv8860.spi_config.ssport = getHwPort("drv8860 CS", engineConfiguration->drv8860_cs);
 		drv8860.spi_config.sspad = getHwPin("drv8860 CS", engineConfiguration->drv8860_cs);

simulator/simulator/efifeatures.h

@@ -27,13 +27,14 @@
 #define EFI_DYNO_VIEW FALSE
 #define EFI_ONBOARD_MEMS FALSE
 #define EFI_DAC FALSE
+#define EFI_ETHERNET FALSE
 #define EFI_POTENTIOMETER FALSE
 #define EFI_PERF_METRICS FALSE
 #define EFI_WIFI FALSE
 #define EFI_BACKUP_SRAM FALSE
 #define EFI_UART_GPS FALSE
 #define EFI_HELLA_OIL FALSE
-#define USE_OPENBLT FALSE
+#define EFI_USE_OPENBLT FALSE
 #define EFI_BOOTLOADER FALSE
 #define EFI_WS2812 FALSE
 #define EFI_MCP_3208 FALSE