diff --git a/firmware/config/engines/mazda_miata_1_6.cpp b/firmware/config/engines/mazda_miata_1_6.cpp
index d36f986de5..f2aa5e4516 100644
--- a/firmware/config/engines/mazda_miata_1_6.cpp
+++ b/firmware/config/engines/mazda_miata_1_6.cpp
@@ -12,6 +12,7 @@
 #include "custom_engine.h"
 #include "fsio_impl.h"
 #include "thermistors.h"
+#include "mazda_miata_1_6.h"
 
 EXTERN_ENGINE;
 
@@ -87,6 +88,29 @@ static const fuel_table_t mafBased16FuelTable = {
 		{/* 15 4.400	*//* 0 800.0*/7.000,	/* 1 1213.33*/7.000,	/* 2 1626.6599*/7.000,	/* 3 2040.0*/7.000,	/* 4 2453.3298*/7.000,	/* 5 2866.66*/7.000,	/* 6 3280.0*/7.000,	/* 7 3693.3298*/7.000,	/* 8 4106.6597*/6.000,	/* 9 4520.0*/6.000,	/* 10 4933.33*/6.000,	/* 11 5346.6597*/6.000,	/* 12 5760.0*/6.000,	/* 13 6173.33*/6.000,	/* 14 6586.6597*/6.000,	/* 15 7000.0*/6.000,	},
 };
 
+void miataNAcommon(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
+	engineConfiguration->trigger.type = TT_MAZDA_MIATA_NA;
+	engineConfiguration->specs.cylindersCount = 4;
+	engineConfiguration->specs.firingOrder = FO_1_3_4_2;
+
+	setCommonNTCSensor(&engineConfiguration->clt);
+	engineConfiguration->clt.config.bias_resistor = 2700;
+	setCommonNTCSensor(&engineConfiguration->iat);
+	engineConfiguration->iat.config.bias_resistor = 2700;
+
+	copyTimingTable(mapBased16IgnitionTable, config->ignitionTable);
+
+	boardConfiguration->idle.solenoidFrequency = 160;
+	boardConfiguration->idle.solenoidPin = GPIOB_9; // this W61 <> W61 jumper, pin 3W
+
+	boardConfiguration->ignitionPins[0] = GPIOE_14; // Frankenso high side - pin 1G
+	boardConfiguration->ignitionPins[1] = GPIO_UNASSIGNED;
+	boardConfiguration->ignitionPins[2] = GPIOC_7; // Frankenso high side - pin 1H
+	boardConfiguration->ignitionPins[3] = GPIO_UNASSIGNED;
+
+	engineConfiguration->ignitionMode = IM_WASTED_SPARK;
+}
+
 void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 	setCustomEngineConfiguration(PASS_ENGINE_PARAMETER_SIGNATURE);
 
@@ -95,9 +119,7 @@ void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 
 	engineConfiguration->map.sensor.type = MT_TOYOTA_89420_02010;
 
-
 	engineConfiguration->mafAdcChannel = EFI_ADC_0;
-	copyTimingTable(mapBased16IgnitionTable, config->ignitionTable);
 
 	memcpy(config->veRpmBins, ve16RpmBins, sizeof(ve16RpmBins));
 	memcpy(config->veLoadBins, ve16LoadBins, sizeof(ve16LoadBins));
@@ -124,22 +146,10 @@ void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 	// set cranking_fuel 5
 	engineConfiguration->cranking.baseFuel = 5;
 
-	engineConfiguration->trigger.type = TT_MAZDA_MIATA_NA;
 	engineConfiguration->specs.displacement = 1.6;
 
-	engineConfiguration->specs.cylindersCount = 4;
-	engineConfiguration->specs.firingOrder = FO_1_3_4_2;
-
 	engineConfiguration->vbattDividerCoeff = 9.75;// ((float) (8.2 + 33)) / 8.2 * 2;
 
-	boardConfiguration->idle.solenoidFrequency = 160;
-	boardConfiguration->idle.solenoidPin = GPIOB_9; // this W61 <> W61 jumper
-
-	setCommonNTCSensor(&engineConfiguration->clt);
-	engineConfiguration->clt.config.bias_resistor = 2700;
-	setCommonNTCSensor(&engineConfiguration->iat);
-	engineConfiguration->iat.config.bias_resistor = 2700;
-
 	boardConfiguration->isSdCardEnabled = true;
 
 	// my car was originally a manual so proper TPS
@@ -185,17 +195,12 @@ void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 	// todo: convert
 	setFsio(0, GPIOC_13, COMBINED_WARNING_LIGHT PASS_ENGINE_PARAMETER_SUFFIX);
 
-	boardConfiguration->ignitionPins[0] = GPIOE_14; // Frankenso high side - pin 1G
-	boardConfiguration->ignitionPins[1] = GPIO_UNASSIGNED;
-	boardConfiguration->ignitionPins[2] = GPIOC_7; // Frankenso high side - pin 1H
-	boardConfiguration->ignitionPins[3] = GPIO_UNASSIGNED;
-
-	engineConfiguration->ignitionMode = IM_WASTED_SPARK;
-
-	boardConfiguration->injectionPins[0] = GPIOD_3; // #1&3
-	boardConfiguration->injectionPins[1] = GPIOE_2; // #2&4
+	boardConfiguration->injectionPins[0] = GPIOD_3; // #1&3 pin 3U
+	boardConfiguration->injectionPins[1] = GPIOE_2; // #2&4 pin 3V
 	boardConfiguration->injectionPins[2] = GPIO_UNASSIGNED;
 	boardConfiguration->injectionPins[3] = GPIO_UNASSIGNED;
 
 	engineConfiguration->injectionMode = IM_BATCH;
+
+	miataNAcommon(PASS_ENGINE_PARAMETER_SIGNATURE);
 }
diff --git a/firmware/config/engines/mazda_miata_1_6.h b/firmware/config/engines/mazda_miata_1_6.h
index 8b57f78052..6edf0c1fef 100644
--- a/firmware/config/engines/mazda_miata_1_6.h
+++ b/firmware/config/engines/mazda_miata_1_6.h
@@ -10,5 +10,6 @@
 
 #include "engine.h"
 void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE);
+void miataNAcommon(DECLARE_ENGINE_PARAMETER_SIGNATURE);
 
 #endif /* CONFIG_ENGINES_MAZDA_MIATA_1_6_H_ */
diff --git a/firmware/config/engines/mazda_miata_na8.cpp b/firmware/config/engines/mazda_miata_na8.cpp
index d14bf9b291..deb1002c17 100644
--- a/firmware/config/engines/mazda_miata_na8.cpp
+++ b/firmware/config/engines/mazda_miata_na8.cpp
@@ -3,15 +3,47 @@
  *
  * set engine_type 56
  *
+ * MAZDA_MIATA_NA8
+ *
  * @date Jan 31, 2018
  * @author Andrey Belomutskiy, (c) 2012-2017
  */
 
 #include "mazda_miata_na8.h"
+#include "custom_engine.h"
+#include "mazda_miata_1_6.h"
 
 EXTERN_ENGINE;
 
+/**
+ * See also setMiataNA_1_6_Configuration
+ */
 void setMazdaMiataNA8Configuration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
+	setCustomEngineConfiguration(PASS_ENGINE_PARAMETER_SIGNATURE);
+
+	// blue jumper wire to W45 bottom jumper, not OEM
+	engineConfiguration->map.sensor.hwChannel = EFI_ADC_7;
+
+	/**
+	 * http://miataturbo.wikidot.com/fuel-injectors
+	 * 94-97 (tan) - #195500-2180
+	 */
+	engineConfiguration->injector.flow = 265;
+
+	engineConfiguration->specs.displacement = 1.839;
+
+
+	engineConfiguration->vbattDividerCoeff = 9.75;// ((float) (8.2 + 33)) / 8.2 * 2;
+
+
+	boardConfiguration->injectionPins[0] = GPIOD_3; // #1 pin 3U
+	boardConfiguration->injectionPins[1] = GPIOE_2; // #2 pin 3V
+	boardConfiguration->injectionPins[2] = GPIOB_8; // #3 pin 3Y
+	boardConfiguration->injectionPins[3] = GPIOB_7; // #4 pin 3Z
+
+	engineConfiguration->injectionMode = IM_SEQUENTIAL;
+
+	miataNAcommon(PASS_ENGINE_PARAMETER_SIGNATURE);
 
 }
 
diff --git a/firmware/controllers/algo/engine_configuration.cpp b/firmware/controllers/algo/engine_configuration.cpp
index 378281e39e..782cceec1d 100644
--- a/firmware/controllers/algo/engine_configuration.cpp
+++ b/firmware/controllers/algo/engine_configuration.cpp
@@ -53,8 +53,9 @@
 #include "GY6_139QMB.h"
 
 #include "mazda_miata.h"
-#include "mazda_miata_nb.h"
 #include "mazda_miata_1_6.h"
+#include "mazda_miata_na8.h"
+#include "mazda_miata_nb.h"
 #include "mazda_miata_vvt.h"
 #include "mazda_323.h"
 #include "mazda_626.h"
@@ -1134,9 +1135,11 @@ void resetConfigurationExt(Logging * logger, engine_type_e engineType DECLARE_EN
 		setZil130(PASS_ENGINE_PARAMETER_SIGNATURE);
 		break;
 	case MIATA_NA_1_6:
-	case MAZDA_MIATA_NA8:
 		setMiataNA_1_6_Configuration(PASS_ENGINE_PARAMETER_SIGNATURE);
 		break;
+	case MAZDA_MIATA_NA8:
+		setMazdaMiataNA8Configuration(PASS_ENGINE_PARAMETER_SIGNATURE);
+		break;
 	case TEST_CIVIC_4_0_BOTH:
 		setHondaCivic4_0_both(PASS_ENGINE_PARAMETER_SIGNATURE);
 		break;
diff --git a/hardware/frankenso/www_docs/frankenso_default_pinout.png b/hardware/frankenso/www_docs/frankenso_default_pinout.png
index 66106590a9..46f8568626 100644
Binary files a/hardware/frankenso/www_docs/frankenso_default_pinout.png and b/hardware/frankenso/www_docs/frankenso_default_pinout.png differ
diff --git a/hardware/frankenso/www_docs/frankenso_default_pinout.xcf b/hardware/frankenso/www_docs/frankenso_default_pinout.xcf
index bf519bebea..13f9d65d5c 100644
Binary files a/hardware/frankenso/www_docs/frankenso_default_pinout.xcf and b/hardware/frankenso/www_docs/frankenso_default_pinout.xcf differ