diff --git a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h index 8d6d2c15d1..e567c583d3 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:29 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:09 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -198,7 +198,7 @@ struct gppwm_channel { load * offset 10 */ - scaled_channel loadBins[GPPWM_LOAD_COUNT]; + scaled_channel loadBins[GPPWM_LOAD_COUNT]; /** RPM * offset 26 @@ -5385,4 +5385,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22088); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:29 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:09 UTC 2023 diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index 3a3587527d..39982b86e0 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -820,7 +820,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 3792499916 +#define SIGNATURE_HASH 1982415437 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1119,7 +1119,7 @@ #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins true -#define TS_SIGNATURE "rusEFI master.2023.12.12.cypress.3792499916" +#define TS_SIGNATURE "rusEFI master.2023.12.12.cypress.1982415437" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h index f1f6aa52cc..2190cb9a90 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:28 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:08 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -198,7 +198,7 @@ struct gppwm_channel { load * offset 10 */ - scaled_channel loadBins[GPPWM_LOAD_COUNT]; + scaled_channel loadBins[GPPWM_LOAD_COUNT]; /** RPM * offset 26 @@ -5385,4 +5385,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 20712); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:28 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:08 UTC 2023 diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 72b3a2a307..9846e1cc06 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -820,7 +820,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 2698851170 +#define SIGNATURE_HASH 888702435 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1119,7 +1119,7 @@ #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins true -#define TS_SIGNATURE "rusEFI master.2023.12.12.kin.2698851170" +#define TS_SIGNATURE "rusEFI master.2023.12.12.kin.888702435" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h index 6951223ba9..f79f84b030 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:30 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:10 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -198,7 +198,7 @@ struct gppwm_channel { load * offset 10 */ - scaled_channel loadBins[GPPWM_LOAD_COUNT]; + scaled_channel loadBins[GPPWM_LOAD_COUNT]; /** RPM * offset 26 @@ -5385,4 +5385,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22088); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:30 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:10 UTC 2023 diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index 2875cfd8f6..2deb6c4b25 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -1058,7 +1058,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3850449883 +#define SIGNATURE_HASH 1906607450 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1357,7 +1357,7 @@ #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins true -#define TS_SIGNATURE "rusEFI master.2023.12.12.subaru_eg33_f7.3850449883" +#define TS_SIGNATURE "rusEFI master.2023.12.12.subaru_eg33_f7.1906607450" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/engine_configuration_generated_structures.h b/firmware/controllers/generated/engine_configuration_generated_structures.h index ceb636c7d2..a575ce8845 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:15 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:55 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -198,7 +198,7 @@ struct gppwm_channel { load * offset 10 */ - scaled_channel loadBins[GPPWM_LOAD_COUNT]; + scaled_channel loadBins[GPPWM_LOAD_COUNT]; /** RPM * offset 26 @@ -5385,4 +5385,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22088); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:15 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:55 UTC 2023 diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 6b3337fd62..83489cfa9b 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -1146,7 +1146,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 1689415263 +#define SIGNATURE_HASH 4036483294 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1445,7 +1445,7 @@ #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins true -#define TS_SIGNATURE "rusEFI master.2023.12.12.f407-discovery.1689415263" +#define TS_SIGNATURE "rusEFI master.2023.12.12.f407-discovery.4036483294" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 7790b09171..7e3536f7a0 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2457419979 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-2chan.2457419979" +#define SIGNATURE_HASH 106755658 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-2chan.106755658" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index b4d3965bb5..10dfa3cc96 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2138263182 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-4chan.2138263182" +#define SIGNATURE_HASH 3948345359 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-4chan.3948345359" diff --git a/firmware/controllers/generated/signature_alphax-4chan_f7.h b/firmware/controllers/generated/signature_alphax-4chan_f7.h index 11c8adb885..3db58bfd42 100644 --- a/firmware/controllers/generated/signature_alphax-4chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2138263182 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-4chan_f7.2138263182" +#define SIGNATURE_HASH 3948345359 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-4chan_f7.3948345359" diff --git a/firmware/controllers/generated/signature_alphax-8chan-revA.h b/firmware/controllers/generated/signature_alphax-8chan-revA.h index 2c9edbc79e..ae861fea64 100644 --- a/firmware/controllers/generated/signature_alphax-8chan-revA.h +++ b/firmware/controllers/generated/signature_alphax-8chan-revA.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3556715215 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan-revA.3556715215" +#define SIGNATURE_HASH 1205509198 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan-revA.1205509198" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index b5a01f1f4f..4efb40645d 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 207298412 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan.207298412" +#define SIGNATURE_HASH 2558437869 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan.2558437869" diff --git a/firmware/controllers/generated/signature_alphax-8chan_f7.h b/firmware/controllers/generated/signature_alphax-8chan_f7.h index c15d9b5680..c75a88f10e 100644 --- a/firmware/controllers/generated/signature_alphax-8chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 207298412 -#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan_f7.207298412" +#define SIGNATURE_HASH 2558437869 +#define TS_SIGNATURE "rusEFI master.2023.12.12.alphax-8chan_f7.2558437869" diff --git a/firmware/controllers/generated/signature_at_start_f435.h b/firmware/controllers/generated/signature_at_start_f435.h index dc07042db3..56b7b2b0bb 100644 --- a/firmware/controllers/generated/signature_at_start_f435.h +++ b/firmware/controllers/generated/signature_at_start_f435.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.at_start_f435.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.at_start_f435.1982415437" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index c6ed407e8a..8796bb7cd3 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2785747074 -#define TS_SIGNATURE "rusEFI master.2023.12.12.atlas.2785747074" +#define SIGNATURE_HASH 841913859 +#define TS_SIGNATURE "rusEFI master.2023.12.12.atlas.841913859" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index cc884bd209..4563fd5032 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.cypress.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.cypress.1982415437" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index b023aef284..96c77ba59a 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1689415263 -#define TS_SIGNATURE "rusEFI master.2023.12.12.f407-discovery.1689415263" +#define SIGNATURE_HASH 4036483294 +#define TS_SIGNATURE "rusEFI master.2023.12.12.f407-discovery.4036483294" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 35bcee619f..cbb63b9fef 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.f429-discovery.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.f429-discovery.1982415437" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 6fe5206965..a8f431b7f3 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3227390982 -#define TS_SIGNATURE "rusEFI master.2023.12.12.frankenso_na6.3227390982" +#define SIGNATURE_HASH 1417388679 +#define TS_SIGNATURE "rusEFI master.2023.12.12.frankenso_na6.1417388679" diff --git a/firmware/controllers/generated/signature_hellen-112-17.h b/firmware/controllers/generated/signature_hellen-112-17.h index e1e512be50..2933796ea9 100644 --- a/firmware/controllers/generated/signature_hellen-112-17.h +++ b/firmware/controllers/generated/signature_hellen-112-17.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 952918226 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-112-17.952918226" +#define SIGNATURE_HASH 2901005907 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-112-17.2901005907" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index d83514466d..72174eaf29 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1392394812 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-gm-e67.1392394812" +#define SIGNATURE_HASH 3336303805 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-gm-e67.3336303805" diff --git a/firmware/controllers/generated/signature_hellen-honda-k.h b/firmware/controllers/generated/signature_hellen-honda-k.h index c84fe8597d..a48aeb2ebc 100644 --- a/firmware/controllers/generated/signature_hellen-honda-k.h +++ b/firmware/controllers/generated/signature_hellen-honda-k.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1005374191 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-honda-k.1005374191" +#define SIGNATURE_HASH 2949217390 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-honda-k.2949217390" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index 6b07e2cf91..ca1c0ae2eb 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2379151835 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-nb1.2379151835" +#define SIGNATURE_HASH 434851674 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen-nb1.434851674" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 04e7b1858a..5a23a9c3e5 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2067403512 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen121nissan.2067403512" +#define SIGNATURE_HASH 4011828345 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen121nissan.4011828345" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 8df680aa41..d098f15b43 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1987242767 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen121vag.1987242767" +#define SIGNATURE_HASH 3797376398 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen121vag.3797376398" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 527b096291..a9d7a4b83c 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 769553318 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen128.769553318" +#define SIGNATURE_HASH 3120284967 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen128.3120284967" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index c2598984cc..f611022356 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3501187184 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen154hyundai.3501187184" +#define SIGNATURE_HASH 1149916913 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen154hyundai.1149916913" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 7a1b8f3ab0..3dbff91330 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2387145441 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen72.2387145441" +#define SIGNATURE_HASH 443368544 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen72.443368544" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index f0a9d8a190..09b1cfe7ba 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1063192227 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen81.1063192227" +#define SIGNATURE_HASH 2876944418 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen81.2876944418" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 3ed893fc7e..a05f3e38f7 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 204044552 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen88bmw.204044552" +#define SIGNATURE_HASH 2550976393 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellen88bmw.2550976393" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index 323a896ae7..7fdf4eb392 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 151087336 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellenNA6.151087336" +#define SIGNATURE_HASH 2636439145 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellenNA6.2636439145" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 0a52ba122b..33de2655c1 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1872787495 -#define TS_SIGNATURE "rusEFI master.2023.12.12.hellenNA8_96.1872787495" +#define SIGNATURE_HASH 4219850406 +#define TS_SIGNATURE "rusEFI master.2023.12.12.hellenNA8_96.4219850406" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index f7bff80ef4..8a7bc8c29b 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 2698851170 -#define TS_SIGNATURE "rusEFI master.2023.12.12.kin.2698851170" +#define SIGNATURE_HASH 888702435 +#define TS_SIGNATURE "rusEFI master.2023.12.12.kin.888702435" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index f84d950911..e0eb0590e9 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1778533094 -#define TS_SIGNATURE "rusEFI master.2023.12.12.m74_9.1778533094" +#define SIGNATURE_HASH 4264031335 +#define TS_SIGNATURE "rusEFI master.2023.12.12.m74_9.4264031335" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index 5e109af745..e6daf087bf 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3244367180 -#define TS_SIGNATURE "rusEFI master.2023.12.12.mre_f4.3244367180" +#define SIGNATURE_HASH 1430563789 +#define TS_SIGNATURE "rusEFI master.2023.12.12.mre_f4.1430563789" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 270d376308..ef51bd4853 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3244367180 -#define TS_SIGNATURE "rusEFI master.2023.12.12.mre_f7.3244367180" +#define SIGNATURE_HASH 1430563789 +#define TS_SIGNATURE "rusEFI master.2023.12.12.mre_f7.1430563789" diff --git a/firmware/controllers/generated/signature_nucleo_f429.h b/firmware/controllers/generated/signature_nucleo_f429.h index 8400fba42b..1be165069f 100644 --- a/firmware/controllers/generated/signature_nucleo_f429.h +++ b/firmware/controllers/generated/signature_nucleo_f429.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_f429.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_f429.1982415437" diff --git a/firmware/controllers/generated/signature_nucleo_f767.h b/firmware/controllers/generated/signature_nucleo_f767.h index d22230abca..a7e1bad1de 100644 --- a/firmware/controllers/generated/signature_nucleo_f767.h +++ b/firmware/controllers/generated/signature_nucleo_f767.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_f767.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_f767.1982415437" diff --git a/firmware/controllers/generated/signature_nucleo_h743.h b/firmware/controllers/generated/signature_nucleo_h743.h index ea70a512d7..3ca441208d 100644 --- a/firmware/controllers/generated/signature_nucleo_h743.h +++ b/firmware/controllers/generated/signature_nucleo_h743.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_h743.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.nucleo_h743.1982415437" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 7b476170eb..0b418ca1da 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3533191516 -#define TS_SIGNATURE "rusEFI master.2023.12.12.prometheus_405.3533191516" +#define SIGNATURE_HASH 1186828253 +#define TS_SIGNATURE "rusEFI master.2023.12.12.prometheus_405.1186828253" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index ca34c3dfb8..3dc9c66b2a 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3533191516 -#define TS_SIGNATURE "rusEFI master.2023.12.12.prometheus_469.3533191516" +#define SIGNATURE_HASH 1186828253 +#define TS_SIGNATURE "rusEFI master.2023.12.12.prometheus_469.1186828253" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index e96aac39bd..e87227fae4 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3793685174 -#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_f4.3793685174" +#define SIGNATURE_HASH 1983560759 +#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_f4.1983560759" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 08cb7c2e81..cdef0ead8d 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3793685174 -#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_f7.3793685174" +#define SIGNATURE_HASH 1983560759 +#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_f7.1983560759" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 8b924934e6..847519157f 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3793685174 -#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_h7.3793685174" +#define SIGNATURE_HASH 1983560759 +#define TS_SIGNATURE "rusEFI master.2023.12.12.proteus_h7.1983560759" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 6f44d3b21d..24fa400641 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2368148650 -#define TS_SIGNATURE "rusEFI master.2023.12.12.s105.2368148650" +#define SIGNATURE_HASH 419602987 +#define TS_SIGNATURE "rusEFI master.2023.12.12.s105.419602987" diff --git a/firmware/controllers/generated/signature_small-can-board.h b/firmware/controllers/generated/signature_small-can-board.h index 75482195db..6c0b47e27f 100644 --- a/firmware/controllers/generated/signature_small-can-board.h +++ b/firmware/controllers/generated/signature_small-can-board.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4020029632 -#define TS_SIGNATURE "rusEFI master.2023.12.12.small-can-board.4020029632" +#define SIGNATURE_HASH 2075754049 +#define TS_SIGNATURE "rusEFI master.2023.12.12.small-can-board.2075754049" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index de7041188f..b6dcbd262d 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3850449883 -#define TS_SIGNATURE "rusEFI master.2023.12.12.subaru_eg33_f7.3850449883" +#define SIGNATURE_HASH 1906607450 +#define TS_SIGNATURE "rusEFI master.2023.12.12.subaru_eg33_f7.1906607450" diff --git a/firmware/controllers/generated/signature_t-b-g.h b/firmware/controllers/generated/signature_t-b-g.h index e5128685fa..1e6952a1ab 100644 --- a/firmware/controllers/generated/signature_t-b-g.h +++ b/firmware/controllers/generated/signature_t-b-g.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3792499916 -#define TS_SIGNATURE "rusEFI master.2023.12.12.t-b-g.3792499916" +#define SIGNATURE_HASH 1982415437 +#define TS_SIGNATURE "rusEFI master.2023.12.12.t-b-g.1982415437" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 7c46f36858..a7ce7c334e 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1755502830 -#define TS_SIGNATURE "rusEFI master.2023.12.12.tdg-pdm8.1755502830" +#define SIGNATURE_HASH 4236734063 +#define TS_SIGNATURE "rusEFI master.2023.12.12.tdg-pdm8.4236734063" diff --git a/firmware/controllers/generated/signature_uaefi.h b/firmware/controllers/generated/signature_uaefi.h index 632971cb04..5723ffaacd 100644 --- a/firmware/controllers/generated/signature_uaefi.h +++ b/firmware/controllers/generated/signature_uaefi.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 387373964 -#define TS_SIGNATURE "rusEFI master.2023.12.12.uaefi.387373964" +#define SIGNATURE_HASH 2201185549 +#define TS_SIGNATURE "rusEFI master.2023.12.12.uaefi.2201185549" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 6ba7fc4292..be5375314a 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.f407-discovery.1689415263" + signature = "rusEFI master.2023.12.12.f407-discovery.4036483294" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.f407-discovery.1689415263" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.f407-discovery.4036483294" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:15 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:55 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index 4b4d1ef031..7a282d3227 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-2chan.2457419979" + signature = "rusEFI master.2023.12.12.alphax-2chan.106755658" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-2chan.2457419979" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-2chan.106755658" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:33 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:13 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index ce4fae3724..88ea164ca5 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-4chan.2138263182" + signature = "rusEFI master.2023.12.12.alphax-4chan.3948345359" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-4chan.2138263182" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-4chan.3948345359" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:35 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:16 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini index aafed2b5da..dcf0418202 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-4chan_f7.2138263182" + signature = "rusEFI master.2023.12.12.alphax-4chan_f7.3948345359" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-4chan_f7.2138263182" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-4chan_f7.3948345359" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:38 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:19 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini index a3963ef800..cabb7ea21b 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-8chan-revA.3556715215" + signature = "rusEFI master.2023.12.12.alphax-8chan-revA.1205509198" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-8chan-revA.3556715215" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-8chan-revA.1205509198" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:46 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:27 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 55d594f5fa..81531d2864 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-8chan.207298412" + signature = "rusEFI master.2023.12.12.alphax-8chan.2558437869" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-8chan.207298412" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-8chan.2558437869" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:41 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:21 UTC 2023 pageSize = 22104 page = 1 @@ -1027,7 +1027,7 @@ gppwm1_onAboveDuty = scalar, U08, 2718, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2719, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2720, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2721, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2722, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2722, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2738, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2754, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2820, [0:8], $output_pin_e_list @@ -1037,7 +1037,7 @@ gppwm2_onAboveDuty = scalar, U08, 2826, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2827, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2828, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2829, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2830, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2830, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2846, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2862, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2928, [0:8], $output_pin_e_list @@ -1047,7 +1047,7 @@ gppwm3_onAboveDuty = scalar, U08, 2934, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2935, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2936, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2937, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2938, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2938, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2954, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2970, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3036, [0:8], $output_pin_e_list @@ -1057,7 +1057,7 @@ gppwm4_onAboveDuty = scalar, U08, 3042, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3043, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3044, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3045, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3046, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3046, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3062, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3078, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3144, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini index 1721826621..45258e22cc 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.alphax-8chan_f7.207298412" + signature = "rusEFI master.2023.12.12.alphax-8chan_f7.2558437869" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.alphax-8chan_f7.207298412" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.alphax-8chan_f7.2558437869" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:43 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:24 UTC 2023 pageSize = 22104 page = 1 @@ -1027,7 +1027,7 @@ gppwm1_onAboveDuty = scalar, U08, 2718, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2719, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2720, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2721, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2722, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2722, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2738, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2754, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2820, [0:8], $output_pin_e_list @@ -1037,7 +1037,7 @@ gppwm2_onAboveDuty = scalar, U08, 2826, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2827, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2828, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2829, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2830, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2830, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2846, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2862, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2928, [0:8], $output_pin_e_list @@ -1047,7 +1047,7 @@ gppwm3_onAboveDuty = scalar, U08, 2934, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2935, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2936, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2937, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2938, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2938, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2954, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2970, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3036, [0:8], $output_pin_e_list @@ -1057,7 +1057,7 @@ gppwm4_onAboveDuty = scalar, U08, 3042, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3043, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3044, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3045, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3046, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3046, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3062, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3078, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3144, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini index c49c6f9e97..ceea472463 100644 --- a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini +++ b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.at_start_f435.3792499916" + signature = "rusEFI master.2023.12.12.at_start_f435.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.at_start_f435.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.at_start_f435.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:11 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:52 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index f47acc15d7..eac248443a 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.atlas.2785747074" + signature = "rusEFI master.2023.12.12.atlas.841913859" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.atlas.2785747074" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.atlas.841913859" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:04 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:45 UTC 2023 pageSize = 21588 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [4], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2730, [4x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2764, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2770, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2771, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2772, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2773, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2774, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2774, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2790, [4], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2798, [4x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2832, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2838, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2839, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2840, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2841, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2842, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2842, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2858, [4], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2866, [4x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 2900, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 2906, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 2907, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 2908, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 2909, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 2910, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 2910, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 2926, [4], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 2934, [4x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 2968, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index 88bb6958a4..f579d4e926 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.cypress.3792499916" + signature = "rusEFI master.2023.12.12.cypress.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.cypress.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.cypress.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:09 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index d559b1f6a2..f339d41e9a 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.f407-discovery.1689415263" + signature = "rusEFI master.2023.12.12.f407-discovery.4036483294" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.f407-discovery.1689415263" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.f407-discovery.4036483294" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:09 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:49 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index ddad74c70d..aa12c01dad 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.f429-discovery.3792499916" + signature = "rusEFI master.2023.12.12.f429-discovery.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.f429-discovery.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.f429-discovery.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:54 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:35 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index 2560a19ca6..22e3bdc45b 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.frankenso_na6.3227390982" + signature = "rusEFI master.2023.12.12.frankenso_na6.1417388679" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.frankenso_na6.3227390982" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.frankenso_na6.1417388679" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:39 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:20 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini index 809298ed13..1825198ae5 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen-112-17.952918226" + signature = "rusEFI master.2023.12.12.hellen-112-17.2901005907" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen-112-17.952918226" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen-112-17.2901005907" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","B20 TPS Throttle Position 2","A14 Analog Input","INVALID","A21 PPS1","B03 TPS Throttle Position 1","INVALID","A07 TODO","A19 Analog Input","A10 Analog Input","INVALID","B19 MAP","A09 Analog Input","B15 CLT","B27 IAT","A11 Analog Input","A12 Analog Input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:07 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:48 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 868e6ed329..1ea7ad9a5d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen-gm-e67.1392394812" + signature = "rusEFI master.2023.12.12.hellen-gm-e67.3336303805" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen-gm-e67.1392394812" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen-gm-e67.3336303805" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:17 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:58 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini index 7dcc683fc3..cd69468a47 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen-honda-k.1005374191" + signature = "rusEFI master.2023.12.12.hellen-honda-k.2949217390" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen-honda-k.1005374191" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen-honda-k.2949217390" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","Aux Analog 1","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT","Aux Analog 2","Aux Analog 3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:56 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:38 UTC 2023 pageSize = 22760 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index 87d878df45..4a3c55eb5a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen-nb1.2379151835" + signature = "rusEFI master.2023.12.12.hellen-nb1.434851674" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen-nb1.2379151835" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen-nb1.434851674" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:14 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:55 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 37d58651a5..af50e79232 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen121nissan.2067403512" + signature = "rusEFI master.2023.12.12.hellen121nissan.4011828345" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen121nissan.2067403512" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen121nissan.4011828345" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:54 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:35 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 839fefd9bd..b8f30cde3c 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen121vag.1987242767" + signature = "rusEFI master.2023.12.12.hellen121vag.3797376398" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen121vag.1987242767" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen121vag.3797376398" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:51 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:32 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index 1213cf2748..b43392fd53 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen128.769553318" + signature = "rusEFI master.2023.12.12.hellen128.3120284967" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen128.769553318" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen128.3120284967" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:49 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:29 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 155cbc4b11..b4637f8d9a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen154hyundai.3501187184" + signature = "rusEFI master.2023.12.12.hellen154hyundai.1149916913" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen154hyundai.3501187184" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen154hyundai.1149916913" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:59 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:40 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index 4254cbbd6c..8a29fa2b71 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen72.2387145441" + signature = "rusEFI master.2023.12.12.hellen72.443368544" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen72.2387145441" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen72.443368544" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:09 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:50 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index a1005dd736..970cc82ad7 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen81.1063192227" + signature = "rusEFI master.2023.12.12.hellen81.2876944418" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen81.1063192227" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen81.2876944418" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:12 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:53 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 2a21623524..b35a84d7d3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellen88bmw.204044552" + signature = "rusEFI master.2023.12.12.hellen88bmw.2550976393" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellen88bmw.204044552" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellen88bmw.2550976393" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:01 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:43 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 9e8ab886d7..de3ea12251 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellenNA6.151087336" + signature = "rusEFI master.2023.12.12.hellenNA6.2636439145" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellenNA6.151087336" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellenNA6.2636439145" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:20 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:00 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index da89c6a884..10db0c246d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.hellenNA8_96.1872787495" + signature = "rusEFI master.2023.12.12.hellenNA8_96.4219850406" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.hellenNA8_96.1872787495" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.hellenNA8_96.4219850406" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:22 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:03 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index e212d57eb7..9880b619a1 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.kin.2698851170" + signature = "rusEFI master.2023.12.12.kin.888702435" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.kin.2698851170" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.kin.888702435" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:28 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:08 UTC 2023 pageSize = 20712 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index f5ff60d926..6748b4a812 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.m74_9.1778533094" + signature = "rusEFI master.2023.12.12.m74_9.4264031335" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.m74_9.1778533094" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.m74_9.4264031335" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","MAF/MAP sensor signal","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Pedal position sensor 1 signal","Pedal position sensor 2 signal","ETB position sensor 1 signal","ETB position sensor 2 signal" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:32 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:13 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 518c8d8138..466d84a6d1 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.mre_f4.3244367180" + signature = "rusEFI master.2023.12.12.mre_f4.1430563789" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.mre_f4.3244367180" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.mre_f4.1430563789" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:10 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index b7acd6dbfc..d48af82922 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.mre_f7.3244367180" + signature = "rusEFI master.2023.12.12.mre_f7.1430563789" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.mre_f7.3244367180" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.mre_f7.1430563789" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:27 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:08 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini index a52c2bb9d3..95d8a2e3ab 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.nucleo_f429.3792499916" + signature = "rusEFI master.2023.12.12.nucleo_f429.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.nucleo_f429.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.nucleo_f429.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:57 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:37 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini index de4db436b2..998fabe73c 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.nucleo_f767.3792499916" + signature = "rusEFI master.2023.12.12.nucleo_f767.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.nucleo_f767.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.nucleo_f767.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:59 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:40 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini index 0a4753e699..e2dabf7a18 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.nucleo_h743.3792499916" + signature = "rusEFI master.2023.12.12.nucleo_h743.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.nucleo_h743.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.nucleo_h743.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:02 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:42 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index c3cf87eaa8..70c50995c4 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.prometheus_405.3533191516" + signature = "rusEFI master.2023.12.12.prometheus_405.1186828253" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.prometheus_405.3533191516" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.prometheus_405.1186828253" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:44 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:25 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index c4c9f10909..176dba10aa 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.prometheus_469.3533191516" + signature = "rusEFI master.2023.12.12.prometheus_469.1186828253" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.prometheus_469.3533191516" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.prometheus_469.1186828253" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:23 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index b12440a3c2..d97c557258 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.proteus_f4.3793685174" + signature = "rusEFI master.2023.12.12.proteus_f4.1983560759" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.proteus_f4.3793685174" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.proteus_f4.1983560759" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:49 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:30 UTC 2023 pageSize = 26088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index ad93ef0af0..c67a37dd50 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.proteus_f7.3793685174" + signature = "rusEFI master.2023.12.12.proteus_f7.1983560759" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.proteus_f7.3793685174" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.proteus_f7.1983560759" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:47 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:28 UTC 2023 pageSize = 26088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index f5ab98ff0d..119c30e4cc 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.proteus_h7.3793685174" + signature = "rusEFI master.2023.12.12.proteus_h7.1983560759" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.proteus_h7.3793685174" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.proteus_h7.1983560759" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:52 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:33 UTC 2023 pageSize = 26088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index 67687f4637..a9dd4afef9 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.s105.2368148650" + signature = "rusEFI master.2023.12.12.s105.419602987" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.s105.2368148650" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.s105.419602987" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:34 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:15 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_small-can-board.ini b/firmware/tunerstudio/generated/rusefi_small-can-board.ini index b4a8517728..d489af080e 100644 --- a/firmware/tunerstudio/generated/rusefi_small-can-board.ini +++ b/firmware/tunerstudio/generated/rusefi_small-can-board.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.small-can-board.4020029632" + signature = "rusEFI master.2023.12.12.small-can-board.2075754049" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.small-can-board.4020029632" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.small-can-board.2075754049" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input","C4 - Analog/Digital Input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:24 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:05 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index 3686f40412..df46979bae 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.subaru_eg33_f7.3850449883" + signature = "rusEFI master.2023.12.12.subaru_eg33_f7.1906607450" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.subaru_eg33_f7.3850449883" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.subaru_eg33_f7.1906607450" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:51:30 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:10 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_t-b-g.ini b/firmware/tunerstudio/generated/rusefi_t-b-g.ini index 393acb7455..6cd00d571d 100644 --- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini +++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.t-b-g.3792499916" + signature = "rusEFI master.2023.12.12.t-b-g.1982415437" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.t-b-g.3792499916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.t-b-g.1982415437" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:37 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:18 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index f72800f078..590bf25d24 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.tdg-pdm8.1755502830" + signature = "rusEFI master.2023.12.12.tdg-pdm8.4236734063" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.tdg-pdm8.1755502830" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.tdg-pdm8.4236734063" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:07 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:47 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/firmware/tunerstudio/generated/rusefi_uaefi.ini b/firmware/tunerstudio/generated/rusefi_uaefi.ini index 58f1a263e1..27ececc486 100644 --- a/firmware/tunerstudio/generated/rusefi_uaefi.ini +++ b/firmware/tunerstudio/generated/rusefi_uaefi.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.12.12.uaefi.387373964" + signature = "rusEFI master.2023.12.12.uaefi.2201185549" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.12.12.uaefi.387373964" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.12.12.uaefi.2201185549" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","D1 AUX1","C3 AUX2","INVALID","D6 PPS1","D13 TPS1","A7 Voltage From Key","INVALID","INVALID","C14 TPS2","INVALID","D9 MAP","INVALID","D16 CLT","D15 IAT","C4 PPS2","C15 AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:52:04 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:57:45 UTC 2023 pageSize = 22088 page = 1 @@ -1024,7 +1024,7 @@ gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list @@ -1034,7 +1034,7 @@ gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list @@ -1044,7 +1044,7 @@ gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list @@ -1054,7 +1054,7 @@ gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" -gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.5, 0, -1000, 10000, 1 gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index ad794277e7..14be330b8d 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:53:15 UTC 2023 +// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Tue Dec 12 22:58:55 UTC 2023 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1086,7 +1086,6 @@ public class Fields { public static final int SentEtbType_FORD_TYPE_1 = 2; public static final int SentEtbType_GM_TYPE_1 = 1; public static final int SentEtbType_NONE = 0; - public static final int SIGNATURE_HASH = 1689415263; public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin"; public static final String SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX = "generated/simulator_tune_image"; public static final String SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX = ".bin"; @@ -1315,7 +1314,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI master.2023.12.12.f407-discovery.1689415263"; + public static final String TS_SIGNATURE = "rusEFI master.2023.12.12.f407-discovery.4036483294"; public static final char TS_SIMULATE_CAN = '>'; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; @@ -2389,7 +2388,7 @@ public class Fields { public static final String[] gppwm_channel_e = {"Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)"}; public static final Field GPPWM1_LOADAXIS = Field.create("GPPWM1_LOADAXIS", 2704, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); public static final Field GPPWM1_RPMAXIS = Field.create("GPPWM1_RPMAXIS", 2705, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); - public static final Field GPPWM1_LOADBINS = Field.create("GPPWM1_LOADBINS", 2706, FieldType.INT16).setScale(0.1).setBaseOffset(0); + public static final Field GPPWM1_LOADBINS = Field.create("GPPWM1_LOADBINS", 2706, FieldType.INT16).setScale(0.5).setBaseOffset(0); public static final Field GPPWM1_RPMBINS = Field.create("GPPWM1_RPMBINS", 2722, FieldType.INT16).setScale(1.0).setBaseOffset(0); public static final Field GPPWM1_TABLE = Field.create("GPPWM1_TABLE", 2738, FieldType.INT8).setScale(0.5).setBaseOffset(0); public static final Field GPPWM1_ALIGNMENTFILL_AT_106 = Field.create("GPPWM1_ALIGNMENTFILL_AT_106", 2802, FieldType.INT8).setScale(1.0).setBaseOffset(0); @@ -2401,7 +2400,7 @@ public class Fields { public static final Field GPPWM2_OFFBELOWDUTY = Field.create("GPPWM2_OFFBELOWDUTY", 2811, FieldType.INT8).setScale(1.0).setBaseOffset(0); public static final Field GPPWM2_LOADAXIS = Field.create("GPPWM2_LOADAXIS", 2812, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); public static final Field GPPWM2_RPMAXIS = Field.create("GPPWM2_RPMAXIS", 2813, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); - public static final Field GPPWM2_LOADBINS = Field.create("GPPWM2_LOADBINS", 2814, FieldType.INT16).setScale(0.1).setBaseOffset(0); + public static final Field GPPWM2_LOADBINS = Field.create("GPPWM2_LOADBINS", 2814, FieldType.INT16).setScale(0.5).setBaseOffset(0); public static final Field GPPWM2_RPMBINS = Field.create("GPPWM2_RPMBINS", 2830, FieldType.INT16).setScale(1.0).setBaseOffset(0); public static final Field GPPWM2_TABLE = Field.create("GPPWM2_TABLE", 2846, FieldType.INT8).setScale(0.5).setBaseOffset(0); public static final Field GPPWM2_ALIGNMENTFILL_AT_106 = Field.create("GPPWM2_ALIGNMENTFILL_AT_106", 2910, FieldType.INT8).setScale(1.0).setBaseOffset(0); @@ -2413,7 +2412,7 @@ public class Fields { public static final Field GPPWM3_OFFBELOWDUTY = Field.create("GPPWM3_OFFBELOWDUTY", 2919, FieldType.INT8).setScale(1.0).setBaseOffset(0); public static final Field GPPWM3_LOADAXIS = Field.create("GPPWM3_LOADAXIS", 2920, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); public static final Field GPPWM3_RPMAXIS = Field.create("GPPWM3_RPMAXIS", 2921, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); - public static final Field GPPWM3_LOADBINS = Field.create("GPPWM3_LOADBINS", 2922, FieldType.INT16).setScale(0.1).setBaseOffset(0); + public static final Field GPPWM3_LOADBINS = Field.create("GPPWM3_LOADBINS", 2922, FieldType.INT16).setScale(0.5).setBaseOffset(0); public static final Field GPPWM3_RPMBINS = Field.create("GPPWM3_RPMBINS", 2938, FieldType.INT16).setScale(1.0).setBaseOffset(0); public static final Field GPPWM3_TABLE = Field.create("GPPWM3_TABLE", 2954, FieldType.INT8).setScale(0.5).setBaseOffset(0); public static final Field GPPWM3_ALIGNMENTFILL_AT_106 = Field.create("GPPWM3_ALIGNMENTFILL_AT_106", 3018, FieldType.INT8).setScale(1.0).setBaseOffset(0); @@ -2425,7 +2424,7 @@ public class Fields { public static final Field GPPWM4_OFFBELOWDUTY = Field.create("GPPWM4_OFFBELOWDUTY", 3027, FieldType.INT8).setScale(1.0).setBaseOffset(0); public static final Field GPPWM4_LOADAXIS = Field.create("GPPWM4_LOADAXIS", 3028, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); public static final Field GPPWM4_RPMAXIS = Field.create("GPPWM4_RPMAXIS", 3029, FieldType.INT8, gppwm_channel_e).setScale(1.0).setBaseOffset(0); - public static final Field GPPWM4_LOADBINS = Field.create("GPPWM4_LOADBINS", 3030, FieldType.INT16).setScale(0.1).setBaseOffset(0); + public static final Field GPPWM4_LOADBINS = Field.create("GPPWM4_LOADBINS", 3030, FieldType.INT16).setScale(0.5).setBaseOffset(0); public static final Field GPPWM4_RPMBINS = Field.create("GPPWM4_RPMBINS", 3046, FieldType.INT16).setScale(1.0).setBaseOffset(0); public static final Field GPPWM4_TABLE = Field.create("GPPWM4_TABLE", 3062, FieldType.INT8).setScale(0.5).setBaseOffset(0); public static final Field GPPWM4_ALIGNMENTFILL_AT_106 = Field.create("GPPWM4_ALIGNMENTFILL_AT_106", 3126, FieldType.INT8).setScale(1.0).setBaseOffset(0);