Auto-generated configs and docs

firmware/controllers/algo/auto_generated_commonenum.cpp

@@ -1,6 +1,6 @@
 #include "global.h"
 #include "rusefi_enums.h"
-// was generated automatically by rusEFI tool  from rusefi_enums.h // by enum_to_string.jar tool on Sun Feb 09 03:15:30 UTC 2025
+// was generated automatically by rusEFI tool  from rusefi_enums.h // by enum_to_string.jar tool on Wed Feb 12 12:51:12 UTC 2025
 // see also gen_config_and_enums.bat
 
 
@@ -754,6 +754,12 @@ const char *getPin_input_mode_e(pin_input_mode_e value){
 switch(value) {
 case PI_DEFAULT:
   return "PI_DEFAULT";
+case PI_INVERTED_DEFAULT:
+  return "PI_INVERTED_DEFAULT";
+case PI_INVERTED_PULLDOWN:
+  return "PI_INVERTED_PULLDOWN";
+case PI_INVERTED_PULLUP:
+  return "PI_INVERTED_PULLUP";
 case PI_PULLDOWN:
   return "PI_PULLDOWN";
 case PI_PULLUP:

firmware/controllers/generated/engine_configuration_generated_structures_alphax-2chan.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-4k-gdi.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan-revA.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1324 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1324 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1324 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1324 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1336 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1336 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1508 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1508 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3920 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3920 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1324 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1324 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1324 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1324 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1336 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1336 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1508 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1508 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3920 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3920 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-gold.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_alphax-silver.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4812,7 +4812,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3908 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3908 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_at_start_f435.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_atlas.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3744 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3744 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_f407-discovery.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_f429-discovery.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_f469-discovery.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_frankenso_na6.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_haba208.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen-honda-k.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen-nb1.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen121nissan.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen121vag.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen128.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellen72.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellenNA6.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_hellenNA8_96.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_m74_9.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_mre-legacy_f4.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_mre_f4.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_mre_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_nucleo_f413.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_proteus_f4.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_proteus_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_proteus_h7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_small-can-board.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_stm32f429_nucleo.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_stm32f767_nucleo.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_stm32h743_nucleo.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_subaru_eg33_f7.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_t-b-g.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_uaefi.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/engine_configuration_generated_structures_uaefi121.h

@@ -2028,10 +2028,10 @@ struct engine_configuration_s {
 	uint8_t alignmentFill_at_919[1] = {};
 	/**
 	offset 920 bit 0 */
-	bool clutchUpPinInverted : 1 {};
+	bool unused920_0 : 1 {};
 	/**
 	offset 920 bit 1 */
-	bool clutchDownPinInverted : 1 {};
+	bool unused920_1 : 1 {};
 	/**
 	 * If enabled we use two H-bridges to drive stepper idle air valve
 	offset 920 bit 2 */
@@ -2410,7 +2410,7 @@ struct engine_configuration_s {
 	bool torqueReductionEnabled : 1 {};
 	/**
 	offset 1308 bit 20 */
-	bool torqueReductionTriggerPinInverted : 1 {};
+	bool unused1308_20 : 1 {};
 	/**
 	offset 1308 bit 21 */
 	bool limitTorqueReductionTime : 1 {};
@@ -2423,7 +2423,7 @@ struct engine_configuration_s {
 	bool engineSnifferFocusOnInputs : 1 {};
 	/**
 	offset 1308 bit 24 */
-	bool launchActivateInverted : 1 {};
+	bool unused1308_24 : 1 {};
 	/**
 	offset 1308 bit 25 */
 	bool twoStroke : 1 {};
@@ -2593,7 +2593,7 @@ struct engine_configuration_s {
 	bool sdTriggerLog : 1 {};
 	/**
 	offset 1320 bit 28 */
-	bool ALSActivateInverted : 1 {};
+	bool unused1320_28 : 1 {};
 	/**
 	offset 1320 bit 29 */
 	bool stepper_dc_use_two_wires : 1 {};
@@ -2867,7 +2867,7 @@ struct engine_configuration_s {
 	bool tcu_rangeSensorPulldown : 1 {};
 	/**
 	offset 1492 bit 16 */
-	bool brakePedalPinInverted : 1 {};
+	bool devBit01 : 1 {};
 	/**
 	offset 1492 bit 17 */
 	bool devBit0 : 1 {};
@@ -4716,7 +4716,7 @@ struct engine_configuration_s {
 	bool nitrousControlEnabled : 1 {};
 	/**
 	offset 3904 bit 1 */
-	bool nitrousControlTriggerPinInverted : 1 {};
+	bool unusedFancy2 : 1 {};
 	/**
 	offset 3904 bit 2 */
 	bool unusedFancy3 : 1 {};

firmware/controllers/generated/rusefi_generated_alphax-2chan.h

@@ -1294,9 +1294,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define show_2chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 4141905286
+#define SIGNATURE_HASH 3846983117
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-2chan.4141905286"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-2chan.3846983117"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-4chan.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1376,7 +1379,7 @@
 #define show_4chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3212345871
+#define SIGNATURE_HASH 2899622468
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4chan.3212345871"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4chan.2899622468"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1376,7 +1379,7 @@
 #define show_4chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3212345871
+#define SIGNATURE_HASH 2899622468
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4chan_f7.3212345871"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4chan_f7.2899622468"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-4k-gdi.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 41292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3521007641
+#define SIGNATURE_HASH 3262277714
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4k-gdi.3521007641"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4k-gdi.3262277714"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h

@@ -1294,9 +1294,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define show_8chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3221733794
+#define SIGNATURE_HASH 3551263209
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan-revA.3221733794"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan-revA.3551263209"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-8chan.h

@@ -1292,9 +1292,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 25312
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1373,7 +1376,7 @@
 #define show_8chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2740803942
+#define SIGNATURE_HASH 2968609069
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1845,7 +1848,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan.2740803942"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan.2968609069"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h

@@ -1292,9 +1292,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 25312
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1373,7 +1376,7 @@
 #define show_8chan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2740803942
+#define SIGNATURE_HASH 2968609069
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1845,7 +1848,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan_f7.2740803942"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan_f7.2968609069"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-gold.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3956080702
+#define SIGNATURE_HASH 4167121013
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-gold.3956080702"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-gold.4167121013"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_alphax-silver.h

@@ -1294,9 +1294,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1374,7 +1377,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 4134120888
+#define SIGNATURE_HASH 3854931443
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1846,7 +1849,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-silver.4134120888"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-silver.3854931443"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_at_start_f435.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.at_start_f435.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.at_start_f435.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_atlas.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 22792
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2101541820
+#define SIGNATURE_HASH 1861141495
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.atlas.2101541820"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.atlas.1861141495"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_f407-discovery.h

@@ -1296,9 +1296,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23296
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_tcu_gauges false
 #define show_test_presets true
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3657295439
+#define SIGNATURE_HASH 3394362884
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f407-discovery.3657295439"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f407-discovery.3394362884"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_f429-discovery.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f429-discovery.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f429-discovery.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_f469-discovery.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 194128225
+#define SIGNATURE_HASH 406720810
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f469-discovery.194128225"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f469-discovery.406720810"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_frankenso_na6.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1379,7 +1382,7 @@
 #define show_tcu_gauges false
 #define show_test_presets true
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1875270633
+#define SIGNATURE_HASH 2087347106
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1851,7 +1854,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.frankenso_na6.1875270633"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.frankenso_na6.2087347106"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_haba208.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.haba208.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.haba208.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen-honda-k.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23780
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1836866948
+#define SIGNATURE_HASH 2127586767
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen-honda-k.1836866948"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen-honda-k.2127586767"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen-nb1.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_HellenNB1_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3135503085
+#define SIGNATURE_HASH 2840576678
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen-nb1.3135503085"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen-nb1.2840576678"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen121nissan.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_Hellen121nissan_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3923688818
+#define SIGNATURE_HASH 4201809209
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen121nissan.3923688818"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen121nissan.4201809209"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen121vag.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_Hellen121vag_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2981605173
+#define SIGNATURE_HASH 2719717246
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen121vag.2981605173"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen121vag.2719717246"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen128.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_Hellen128merc_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3570861317
+#define SIGNATURE_HASH 3346742606
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen128.3570861317"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen128.3346742606"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen154hyundai.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3690524410
+#define SIGNATURE_HASH 3361003185
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen154hyundai.3690524410"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen154hyundai.3361003185"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 682059880
+#define SIGNATURE_HASH 990597155
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen154hyundai_f7.682059880"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen154hyundai_f7.990597155"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellen72.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_HellenNB2_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3295527460
+#define SIGNATURE_HASH 3619813999
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellen72.3295527460"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellen72.3619813999"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellenNA6.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1378,7 +1381,7 @@
 #define show_HellenNA6_presets true
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2917190674
+#define SIGNATURE_HASH 3192714329
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellenNA6.2917190674"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellenNA6.3192714329"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_hellenNA8_96.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1379,7 +1382,7 @@
 #define show_HellenNB1_presets false
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1379569372
+#define SIGNATURE_HASH 1100396183
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1851,7 +1854,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.hellenNA8_96.1379569372"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.hellenNA8_96.1100396183"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_m74_9.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 22748
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1599499373
+#define SIGNATURE_HASH 1291473958
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.m74_9.1599499373"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.m74_9.1291473958"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_mre-legacy_f4.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 25292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1376,7 +1379,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1916530225
+#define SIGNATURE_HASH 1637340794
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.mre-legacy_f4.1916530225"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.mre-legacy_f4.1637340794"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_mre_f4.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 25292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1376,7 +1379,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1916530225
+#define SIGNATURE_HASH 1637340794
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.mre_f4.1916530225"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.mre_f4.1637340794"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_mre_f7.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 25292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1376,7 +1379,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1916530225
+#define SIGNATURE_HASH 1637340794
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.mre_f7.1916530225"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.mre_f7.1637340794"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_nucleo_f413.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.nucleo_f413.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.nucleo_f413.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_proteus_f4.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 28792
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1420132018
+#define SIGNATURE_HASH 1191790329
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.proteus_f4.1420132018"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.proteus_f4.1191790329"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_proteus_f7.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 28792
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1420132018
+#define SIGNATURE_HASH 1191790329
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.proteus_f7.1420132018"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.proteus_f7.1191790329"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_proteus_h7.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 28792
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1420132018
+#define SIGNATURE_HASH 1191790329
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.proteus_h7.1420132018"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.proteus_h7.1191790329"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_small-can-board.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 1706951391
+#define SIGNATURE_HASH 1980906132
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1848,7 +1851,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.small-can-board.1706951391"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.small-can-board.1980906132"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.stm32f429_nucleo.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.stm32f429_nucleo.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.stm32f767_nucleo.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.stm32f767_nucleo.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.stm32h743_nucleo.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.stm32h743_nucleo.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_subaru_eg33_f7.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 20616
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 707164390
+#define SIGNATURE_HASH 965361837
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1850,7 +1853,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.subaru_eg33_f7.707164390"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.subaru_eg33_f7.965361837"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_t-b-g.h

@@ -1297,9 +1297,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1377,7 +1380,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 960835570
+#define SIGNATURE_HASH 719919033
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1849,7 +1852,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.t-b-g.960835570"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.t-b-g.719919033"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_uaefi.h

@@ -1291,9 +1291,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23332
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1371,7 +1374,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2096747614
+#define SIGNATURE_HASH 1867901973
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1844,7 +1847,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.uaefi.2096747614"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.uaefi.1867901973"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/rusefi_generated_uaefi121.h

@@ -1295,9 +1295,12 @@
 #define PERCENT_TRIM_BYTE_PACKING_DIV 0.02
 #define persistent_config_s_size 23292
 #define pid_s_size 20
-#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP"
-#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN"
+#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",4="PI_INVERTED_DEFAULT",6="PI_INVERTED_PULLDOWN",5="PI_INVERTED_PULLUP",2="PI_PULLDOWN",1="PI_PULLUP"
+#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN", "INVALID", "INVERTED DEFAULT", "INVERTED PULLUP", "INVERTED PULLDOWN"
 #define pin_input_mode_e_PI_DEFAULT 0
+#define pin_input_mode_e_PI_INVERTED_DEFAULT 4
+#define pin_input_mode_e_PI_INVERTED_PULLDOWN 6
+#define pin_input_mode_e_PI_INVERTED_PULLUP 5
 #define pin_input_mode_e_PI_PULLDOWN 2
 #define pin_input_mode_e_PI_PULLUP 1
 #define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN"
@@ -1375,7 +1378,7 @@
 #define SentInput_NONE 0
 #define show_tcu_gauges false
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 329326412
+#define SIGNATURE_HASH 861959
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1847,7 +1850,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI master.2025.02.11.uaefi121.329326412"
+#define TS_SIGNATURE "rusEFI master.2025.02.12.uaefi121.861959"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

firmware/controllers/generated/signature_alphax-2chan.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 4141905286
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-2chan.4141905286"
+#define SIGNATURE_HASH 3846983117
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-2chan.3846983117"

firmware/controllers/generated/signature_alphax-4chan.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3212345871
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4chan.3212345871"
+#define SIGNATURE_HASH 2899622468
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4chan.2899622468"

firmware/controllers/generated/signature_alphax-4chan_f7.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3212345871
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4chan_f7.3212345871"
+#define SIGNATURE_HASH 2899622468
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4chan_f7.2899622468"

firmware/controllers/generated/signature_alphax-4k-gdi.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3521007641
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-4k-gdi.3521007641"
+#define SIGNATURE_HASH 3262277714
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-4k-gdi.3262277714"

firmware/controllers/generated/signature_alphax-8chan-revA.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3221733794
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan-revA.3221733794"
+#define SIGNATURE_HASH 3551263209
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan-revA.3551263209"

firmware/controllers/generated/signature_alphax-8chan.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 2740803942
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan.2740803942"
+#define SIGNATURE_HASH 2968609069
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan.2968609069"

firmware/controllers/generated/signature_alphax-8chan_f7.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 2740803942
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-8chan_f7.2740803942"
+#define SIGNATURE_HASH 2968609069
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-8chan_f7.2968609069"

firmware/controllers/generated/signature_alphax-gold.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3956080702
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-gold.3956080702"
+#define SIGNATURE_HASH 4167121013
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-gold.4167121013"

firmware/controllers/generated/signature_alphax-silver.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 4134120888
-#define TS_SIGNATURE "rusEFI master.2025.02.11.alphax-silver.4134120888"
+#define SIGNATURE_HASH 3854931443
+#define TS_SIGNATURE "rusEFI master.2025.02.12.alphax-silver.3854931443"

firmware/controllers/generated/signature_at_start_f435.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 960835570
-#define TS_SIGNATURE "rusEFI master.2025.02.11.at_start_f435.960835570"
+#define SIGNATURE_HASH 719919033
+#define TS_SIGNATURE "rusEFI master.2025.02.12.at_start_f435.719919033"

firmware/controllers/generated/signature_atlas.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 2101541820
-#define TS_SIGNATURE "rusEFI master.2025.02.11.atlas.2101541820"
+#define SIGNATURE_HASH 1861141495
+#define TS_SIGNATURE "rusEFI master.2025.02.12.atlas.1861141495"

firmware/controllers/generated/signature_f407-discovery.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3657295439
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f407-discovery.3657295439"
+#define SIGNATURE_HASH 3394362884
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f407-discovery.3394362884"

firmware/controllers/generated/signature_f429-discovery.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 960835570
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f429-discovery.960835570"
+#define SIGNATURE_HASH 719919033
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f429-discovery.719919033"

firmware/controllers/generated/signature_f469-discovery.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 194128225
-#define TS_SIGNATURE "rusEFI master.2025.02.11.f469-discovery.194128225"
+#define SIGNATURE_HASH 406720810
+#define TS_SIGNATURE "rusEFI master.2025.02.12.f469-discovery.406720810"

firmware/controllers/generated/signature_frankenso_na6.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 1875270633
-#define TS_SIGNATURE "rusEFI master.2025.02.11.frankenso_na6.1875270633"
+#define SIGNATURE_HASH 2087347106
+#define TS_SIGNATURE "rusEFI master.2025.02.12.frankenso_na6.2087347106"