Merge branch 'master' of https://github.com/rusefi/rusefi
This commit is contained in:
rusefi
commit
aff53dfc1e
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Tue Apr 28 20:11:11 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONFIG_BOARDS_KINETIS_CONFIG_CONTROLLERS_ALGO_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -2652,12 +2652,12 @@ struct engine_configuration_s {
|
|||
*/
|
||||
float unused2432;
|
||||
/**
|
||||
* Fuel multiplier taper, see also postCrankingDurationSec
|
||||
* Fuel multiplier (enrichment) immediately after engine start
|
||||
* offset 2436
|
||||
*/
|
||||
float postCrankingFactor;
|
||||
/**
|
||||
* See also postCrankingFactor
|
||||
* Time over which to taper out after start enrichment
|
||||
* offset 2440
|
||||
*/
|
||||
float postCrankingDurationSec;
|
||||
|
|
@ -3415,4 +3415,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Tue Apr 28 20:11:11 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Tue Apr 28 20:10:00 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -2652,12 +2652,12 @@ struct engine_configuration_s {
|
|||
*/
|
||||
float unused2432;
|
||||
/**
|
||||
* Fuel multiplier taper, see also postCrankingDurationSec
|
||||
* Fuel multiplier (enrichment) immediately after engine start
|
||||
* offset 2436
|
||||
*/
|
||||
float postCrankingFactor;
|
||||
/**
|
||||
* See also postCrankingFactor
|
||||
* Time over which to taper out after start enrichment
|
||||
* offset 2440
|
||||
*/
|
||||
float postCrankingDurationSec;
|
||||
|
|
@ -3415,4 +3415,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Tue Apr 28 20:10:00 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
|
||||
|
|
|
|||
|
|
@ -765,7 +765,7 @@ custom fsio_pwm_freq_t 2 scalar, U16, @OFFSET@, "Hz", 1, 0,
|
|||
fsio_pwm_freq_t[FSIO_COMMAND_COUNT iterate] fsioFrequency;
|
||||
|
||||
|
||||
custom fsio_setting_t 4 scalar, F32, @OFFSET@, "Val", 1, 0, 0, 18000, 4
|
||||
custom fsio_setting_t 4 scalar, F32, @OFFSET@, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting_t[FSIO_COMMAND_COUNT iterate] fsio_setting;
|
||||
|
||||
! todo: migrate to spi_pins & combine with spi pin modes
|
||||
|
|
@ -1125,8 +1125,8 @@ tle8888_mode_e tle8888mode;
|
|||
float autoTuneTpsRocThreshold;
|
||||
float autoTuneTpsQuietPeriod;
|
||||
float unused2432;
|
||||
float postCrankingFactor;Fuel multiplier taper, see also postCrankingDurationSec;"mult", 1, 0, 0, 100, 4
|
||||
float postCrankingDurationSec;See also postCrankingFactor;"seconds", 1, 0, 0, 100, 2
|
||||
float postCrankingFactor;+Fuel multiplier (enrichment) immediately after engine start;"mult", 1, 0, 0, 100, 4
|
||||
float postCrankingDurationSec;+Time over which to taper out after start enrichment;"seconds", 1, 0, 0, 100, 2
|
||||
ThermistorConf auxTempSensor1;todo: finish implementation #332
|
||||
ThermistorConf auxTempSensor2;todo: finish implementation #332
|
||||
int16_t fuelClosedLoopCltThreshold;;"C", 1, 0, 0, 100, 0
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Wed Apr 29 22:58:08 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -2473,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2589,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2866,9 +2868,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2877,11 +2882,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2890,9 +2892,20 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3045,15 +3058,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3267,8 +3271,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3281,17 +3285,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3304,21 +3312,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3794,7 +3810,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3811,7 +3826,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -1238,6 +1238,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -1354,7 +1355,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -1631,9 +1631,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -1642,11 +1645,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -1655,9 +1655,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == @@TRIGGER_TYPE_60_2@@ || trigger_type == @@TRIGGER_TYPE_36_1@@}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
panel = triggerInputComparator @@if_ts_show_trigger_comparator
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -1810,16 +1822,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
panel = triggerInputComparator @@if_ts_show_trigger_comparator
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -2033,8 +2035,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -2047,17 +2049,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -2070,21 +2076,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -2560,7 +2574,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -2577,7 +2590,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Wed Apr 29 22:58:16 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:20 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -2473,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2589,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2866,9 +2868,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2877,11 +2882,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2890,9 +2892,20 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3045,15 +3058,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3267,8 +3271,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3281,17 +3285,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3304,21 +3312,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3794,7 +3810,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3811,7 +3826,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Wed Apr 29 16:41:41 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PB16", "PB17", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16", "PC17", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PE16", "PE17", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PB16", "PB17", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16", "PC17", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PE16", "PE17", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PB16", "PB17", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16", "PC17", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PE16", "PE17", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -1326,6 +1328,7 @@ page = 1
|
|||
gppwm4_loadAxis = "Selects the load axis to use for the table."
|
||||
|
||||
|
||||
; SettingContextHelpEnd
|
||||
; CONFIG_DEFINITION_END
|
||||
idleRpmPid_offset = "Constant base value"
|
||||
idleRpmPid_periodMs = "PID recalculation period"
|
||||
|
|
@ -2472,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2588,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2643,8 +2646,9 @@ menuDialog = main
|
|||
subMenu = connection, "Connection"
|
||||
subMenu = tle8888, "TLE8888"
|
||||
|
||||
subMenu = allPins1, "Full pinout 1/2"
|
||||
subMenu = allPins2, "Full pinout 2/2"
|
||||
subMenu = allPins1, "Full pinout 1/3"
|
||||
subMenu = allPins2, "Full pinout 2/3"
|
||||
subMenu = allPins3_1_and_2 "Full pinout 3/3"
|
||||
subMenu = std_separator
|
||||
|
||||
|
||||
|
|
@ -2864,9 +2868,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2875,11 +2882,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2888,9 +2892,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
panel = triggerInputComparator
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3043,16 +3059,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
panel = triggerInputComparator
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3080,23 +3086,24 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "A/C Switch", acSwitchAdc
|
||||
field = "Aux Temperature #1", auxTempSensor1_adcChannel
|
||||
field = "Aux Temperature #2", auxTempSensor2_adcChannel
|
||||
field = "Aux Fast Analog", auxFastSensor1_adcChannel
|
||||
|
||||
dialog = allPinsMC33, "MC33816"
|
||||
field = "Chip Select", mc33816_cs
|
||||
field = rstb, mc33816_rstb
|
||||
field = flag0, mc33816_flag0
|
||||
field = mc33816_driven, mc33816_driven
|
||||
field = mc33816spiDevice, mc33816spiDevice
|
||||
|
||||
dialog = allPins1_1
|
||||
field = mc33816_cs, mc33816_cs
|
||||
field = mc33816_rstb, mc33816_rstb
|
||||
field = mc33816_flag0, mc33816_flag0
|
||||
field = "trigger stimulator pin #1", triggerSimulatorPins1
|
||||
field = "trigger stimulator pin #2", triggerSimulatorPins2
|
||||
field = "trigger stimulator pin #2", triggerSimulatorPins3
|
||||
field = high_fuel_pressure_sensor_1, high_fuel_pressure_sensor_1
|
||||
field = high_fuel_pressure_sensor_2, high_fuel_pressure_sensor_2
|
||||
field = mc33816_driven, mc33816_driven
|
||||
field = mc33816spiDevice, mc33816spiDevice
|
||||
field = "Warning Led", warningLedPin
|
||||
field = "tle6240_cs", tle6240_cs
|
||||
field = "tle6240 SPI", tle6240spiDevice
|
||||
field = "mc33972_cs", mc33972_cs
|
||||
panel = allPinsSensors
|
||||
|
||||
dialog = allPins1_2
|
||||
field = "Tachometer output Pin", tachOutputPin
|
||||
|
|
@ -3118,16 +3125,10 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "ETB#2 Disable", etbIo2_disablePin
|
||||
field = "SD CS Pin", sdCardCsPin
|
||||
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
|
||||
field = "Aux Pin #1", auxPidPins1
|
||||
field = "Aux Pin #2", auxPidPins2
|
||||
field = "Aux Pin #3", auxPidPins3
|
||||
field = "Aux Pin #4", auxPidPins4
|
||||
field = "test557pin", test557pin
|
||||
field = "Fan Pin", fanPin
|
||||
field = "Main Relay Pin", mainRelayPin
|
||||
field = "Starter Relay Pin", starterRelayDisablePin
|
||||
field = "aux valve #1", auxValves1
|
||||
field = "aux valve #2", auxValves2
|
||||
|
||||
dialog = allPins2_1
|
||||
field = "Injection Pin 1", injectionPins1
|
||||
|
|
@ -3197,7 +3198,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "LCD D6 pin", HD44780_db6
|
||||
field = "LCD D7 pin", HD44780_db7
|
||||
field = "Debug Trigger Sync", debugTriggerSync
|
||||
field = "Aux Fast Analog", auxFastSensor1_adcChannel
|
||||
panel = allPinsMC33
|
||||
|
||||
dialog = allPins1_3
|
||||
field = "FSIO ADC #1", fsioAdc1
|
||||
|
|
@ -3223,22 +3224,37 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Saab CDM knock", cdmInputPin
|
||||
field = "comm status light", communicationLedPin
|
||||
field = "running status light", runningLedPin
|
||||
field = "TLE8888 Chip Select", tle8888_cs
|
||||
field = "TLE 8888 spi", tle8888spiDevice
|
||||
|
||||
|
||||
dialog = allPins3_1
|
||||
panel = allPinsSensors
|
||||
|
||||
dialog = allPins3_2
|
||||
field = "servo#1", servoOutputPins1
|
||||
field = "servo#2", servoOutputPins2
|
||||
field = "servo#3", servoOutputPins3
|
||||
field = "servo#4", servoOutputPins4
|
||||
field = "servo#5", servoOutputPins5
|
||||
field = "Aux Pin #1", auxPidPins1
|
||||
field = "Aux Pin #2", auxPidPins2
|
||||
field = "Aux Pin #3", auxPidPins3
|
||||
field = "Aux Pin #4", auxPidPins4
|
||||
field = "Aux Valve #1", auxValves1
|
||||
field = "Aux Valve #2", auxValves2
|
||||
field = "TLE8888 Chip Select", tle8888_cs
|
||||
field = "TLE 8888 spi", tle8888spiDevice
|
||||
field = "AUX Serial TX", auxSerialTxPin
|
||||
field = "AUX Serial RX", auxSerialRxPin
|
||||
|
||||
dialog = allPins3_1_and_2, "All Pins 3/3", xAxis
|
||||
panel = allPins3_1
|
||||
panel = allPins3_2
|
||||
|
||||
dialog = allPins1_1_and_2, "", xAxis
|
||||
panel = allPins1_1
|
||||
panel = allPins1_2
|
||||
|
||||
dialog = allPins1, "All Pins 1/2", xAxis
|
||||
dialog = allPins1, "All Pins 1/3", xAxis
|
||||
panel = allPins1_1_and_2
|
||||
panel = allPins1_3
|
||||
|
||||
|
|
@ -3246,7 +3262,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
panel = allPins2_1
|
||||
panel = allPins2_2
|
||||
|
||||
dialog = allPins2, "All Pins 2/2", xAxis
|
||||
dialog = allPins2, "All Pins 2/3", xAxis
|
||||
panel = allPins2_1_and_2
|
||||
panel = allPins2_3
|
||||
|
||||
|
|
@ -3256,8 +3272,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3270,17 +3286,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3293,21 +3313,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3783,7 +3811,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3800,7 +3827,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Wed Apr 29 22:58:14 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:41:28 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -2473,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2589,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2857,9 +2859,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2868,11 +2873,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2881,9 +2883,20 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3036,15 +3049,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3234,8 +3238,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3248,17 +3252,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3271,21 +3279,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3753,7 +3769,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3770,7 +3785,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Wed Apr 29 22:58:20 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:26 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -2473,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2589,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2862,9 +2864,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2873,11 +2878,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2886,9 +2888,20 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3041,15 +3054,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3263,8 +3267,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3277,17 +3281,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3300,21 +3308,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3790,7 +3806,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3807,7 +3822,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Wed Apr 29 22:58:32 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:29 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -484,22 +484,22 @@ page = 1
|
|||
fsioFrequency14 = scalar, U16, 858, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency15 = scalar, U16, 860, "Hz", 1, 0, 0, 3000, 0
|
||||
fsioFrequency16 = scalar, U16, 862, "Hz", 1, 0, 0, 3000, 0
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 4
|
||||
fsio_setting1 = scalar, F32, 864, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting2 = scalar, F32, 868, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting3 = scalar, F32, 872, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting4 = scalar, F32, 876, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting5 = scalar, F32, 880, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting6 = scalar, F32, 884, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting7 = scalar, F32, 888, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting8 = scalar, F32, 892, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting9 = scalar, F32, 896, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting10 = scalar, F32, 900, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting11 = scalar, F32, 904, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting12 = scalar, F32, 908, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting13 = scalar, F32, 912, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting14 = scalar, F32, 916, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting15 = scalar, F32, 920, "Val", 1, 0, 0, 18000, 2
|
||||
fsio_setting16 = scalar, F32, 924, "Val", 1, 0, 0, 18000, 2
|
||||
spi1mosiPin = bits, U08, 928, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1misoPin = bits, U08, 929, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
spi1sckPin = bits, U08, 930, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -1280,6 +1280,8 @@ page = 1
|
|||
debugMode = "See http://rusefi.com/s/debugmode\n\nset debug_mode X"
|
||||
dizzySparkOutputPin = "This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin"
|
||||
crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling."
|
||||
postCrankingFactor = "Fuel multiplier (enrichment) immediately after engine start"
|
||||
postCrankingDurationSec = "Time over which to taper out after start enrichment"
|
||||
auxTempSensor1_bias_resistor = "Pull-up resistor value on your board"
|
||||
auxTempSensor2_bias_resistor = "Pull-up resistor value on your board"
|
||||
spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc."
|
||||
|
|
@ -2473,6 +2475,7 @@ menuDialog = main
|
|||
menu = "&Base &Engine"
|
||||
subMenu = engineChars, "Base engine"
|
||||
subMenu = triggerConfiguration, "Trigger"
|
||||
subMenu = triggerConfiguration_IO, "Advanced Trigger"
|
||||
subMenu = std_separator
|
||||
subMenu = energySystems, "Battery and alternator"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2589,7 +2592,6 @@ menuDialog = main
|
|||
|
||||
menu = "&Sensors"
|
||||
# Base analog input settings
|
||||
subMenu = triggerInputs, "Trigger inputs"
|
||||
subMenu = otherSensorInputs, "Misc sensors"
|
||||
subMenu = analogInputSettings, "Analog input settings"
|
||||
subMenu = std_separator
|
||||
|
|
@ -2857,9 +2859,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Firing Order", firingOrder
|
||||
|
||||
; Engine->Trigger configuration
|
||||
dialog = triggerConfiguration_settings, "Settings Trigger"
|
||||
dialog = triggerConfiguration_settings, "Trigger Pattern"
|
||||
field = "!https://rusefi.com/s/trigger"
|
||||
field = "Trigger type", trigger_type
|
||||
field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0}
|
||||
|
||||
; see also in firmware '[doesTriggerImplyOperationMode]' tag
|
||||
field = "Operation mode / speed", ambiguousOperationMode
|
||||
field = "With VR sensors only rising edge has reliable position"
|
||||
|
|
@ -2868,11 +2873,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "!For well-known trigger types use '0' trigger angle offset"
|
||||
field = "Trigger Angle Offset", globalTriggerAngleOffset
|
||||
field = "Display only interesting", displayLogicLevelsInEngineSniffer
|
||||
field = "#Custom Trigger"
|
||||
field = "total Tooth Count", trigger_customTotalToothCount, {trigger_type == 0}
|
||||
field = "skipped Tooth Count", trigger_customSkippedToothCount, {trigger_type == 0}
|
||||
|
||||
dialog = triggerConfiguration_IO, "Settings I/O"
|
||||
dialog = triggerConfiguration_IO, "Advanced Trigger"
|
||||
field = "!https://rusefi.com/s/vvt"
|
||||
field = "VVT mode", vvtMode, {trigger_type != 80}
|
||||
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != 80}
|
||||
|
|
@ -2881,9 +2883,20 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "print verbose sync details to console",verboseTriggerSynchDetails
|
||||
field = "Do not print messages in case of sync error", silentTriggerError
|
||||
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9}
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
|
||||
dialog = triggerConfiguration
|
||||
panel = triggerConfiguration_settings, North
|
||||
panel = triggerConfiguration_IO, South
|
||||
panel = triggerInputs, South
|
||||
|
||||
; Engine->Injection Settings
|
||||
dialog = injChars, "Injector Settings", yAxis
|
||||
|
|
@ -3036,15 +3049,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Comparator hysteresis voltage (Max)", triggerCompHystMax
|
||||
field = "VR-sensor saturation RPM", triggerCompSensorSatRpm
|
||||
|
||||
dialog = triggerInputs, "Trigger Inputs"
|
||||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "#Cam is primary if you have cam sensor"
|
||||
field = "Primary channel", triggerInputPins1
|
||||
field = "Invert Primary", invertPrimaryTriggerSignal
|
||||
field = "Secondary channel", triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
|
||||
field = "Cam Sync/VVT input", camInputs1
|
||||
|
||||
;
|
||||
; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to
|
||||
; configure the features.
|
||||
|
|
@ -3242,8 +3246,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
|
|
@ -3256,17 +3260,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
|
||||
dialog = cltSensor, "", xAxis
|
||||
panel = clt_thermistor
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
gauge = rawCltGauge
|
||||
|
||||
dialog = cltSensor, "CLT Sensor", border
|
||||
panel = clt_thermistor, West
|
||||
panel = cltGauges, East
|
||||
|
||||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
|
|
@ -3279,21 +3287,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
|
||||
dialog = iatSensor, "", xAxis
|
||||
panel = iat_thermistor
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
gauge = rawIatGauge
|
||||
|
||||
dialog = iatSensor, "IAT Sensor", border
|
||||
panel = iat_thermistor, West
|
||||
panel = iatGauges, East
|
||||
|
||||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil pressure sensor"
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
|
||||
dialog = oilPressureSensor, "", xAxis
|
||||
panel = oilp_settings
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
gauge = rawOilPressureGauge
|
||||
|
||||
dialog = oilPressureSensor, "", border
|
||||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
|
|
@ -3761,7 +3777,6 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = crankingFuel, "Fuel"
|
||||
field = "Injection mode", crankingInjectionMode
|
||||
field = "!Value '1' is currently recommended"
|
||||
field = "Fuel Source For Cranking", useRunningMathForCranking
|
||||
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
|
||||
|
||||
|
|
@ -3778,7 +3793,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
|
||||
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
|
||||
|
||||
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
|
||||
dialog = postCrankingEnrichment, "After start enrichment"
|
||||
field = "Post-Cranking factor", postCrankingFactor
|
||||
field = "Duration", postCrankingDurationSec
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue