andreika-git
/
rusefi
mirror of https://github.com/andreika-git/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

vvt ui (#2484)

This commit is contained in:
Matthew Kennedy 2021-03-23 12:18:36 -07:00 committed by GitHub
parent d1ff1d35c1
commit c33d225d19
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 16 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/integration/rusefi_config.txt
View File

@ -680,7 +680,7 @@ float globalFuelCorrection;set global_fuel_correction X;"coef", 1, 0.0,
float adcVcc;; "volts", 1, 0.0, 0, 6.0, 3 float adcVcc;; "volts", 1, 0.0, 0, 6.0, 3
float maxKnockSubDeg;maximum total number of degrees to subtract from ignition advance\nwhen knocking;"Deg", 1, 0, 0, 100, 0 float maxKnockSubDeg;maximum total number of degrees to subtract from ignition advance\nwhen knocking;"Deg", 1, 0, 0, 100, 0
brain_input_pin_e[CAM_INPUTS_COUNT iterate] camInputs;+Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660 brain_input_pin_e[CAM_INPUTS_COUNT iterate] camInputs;+Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.
uint8_t[CAM_INPUTS_COUNT_padding] camInputsPadding;; uint8_t[CAM_INPUTS_COUNT_padding] camInputsPadding;;
struct afr_sensor_s struct afr_sensor_s

26
firmware/tunerstudio/rusefi.input
View File

@ -1823,27 +1823,31 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "!https://rusefi.com/s/vvt" field = "!https://rusefi.com/s/vvt"
; todo: code generator to hard-code all triggers not requiring VVT? ; todo: code generator to hard-code all triggers not requiring VVT?
; todo: https://github.com/rusefi/rusefi/issues/2077 ; todo: https://github.com/rusefi/rusefi/issues/2077
field = "CAM/VVT mode shaft #1", vvtMode1, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@} field = "Cam mode (intake cams)", vvtMode1, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@}
field = "VVT mode shaft #2", vvtMode2, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@} field = "Cam mode (exhaust cams)", vvtMode2, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@}
field = "VVT use rise front", vvtCamSensorUseRise, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@} field = "VVT use only rising edge", vvtCamSensorUseRise, {trigger_type != @@TT_TT_MAZDA_MIATA_NA@@}
field = "VVT position display offset", vvtOffset field = "#Set offset so VVT indicates 0 degrees in default position"
field = "VVT offset bank 1 intake", vvtOffset
;field = "VVT offset bank 1 exhaust", vvtOffset2
;field = "VVT offset bank 2 intake", vvtOffset3
;field = "VVT offset bank 2 exhaust", vvtOffset4
field = "print verbose VVT sync details to console",verboseVVTDecoding field = "print verbose VVT sync details to console",verboseVVTDecoding
field = "Do not print messages in case of sync error", silentTriggerError field = "Do not print messages in case of sync error", silentTriggerError
field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == @@TT_TT_TOOTHED_WHEEL_60_2@@ || trigger_type == @@TT_TT_TOOTHED_WHEEL_36_1@@} field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == @@TT_TT_TOOTHED_WHEEL_60_2@@ || trigger_type == @@TT_TT_TOOTHED_WHEEL_36_1@@}
dialog = triggerInputs, "Trigger Inputs" dialog = triggerInputs, "Trigger Inputs"
field = "!ECU reboot needed to apply these settings"
field = "#Cam is primary if you have cam sensor as part of trigger shape" field = "#Cam is primary if you have cam sensor as part of trigger shape"
field = "Primary channel", triggerInputPins1 field = "Primary channel", triggerInputPins1
field = "Invert Primary", invertPrimaryTriggerSignal field = "Invert Primary", invertPrimaryTriggerSignal
field = "Secondary channel", triggerInputPins2, { trigger_type != @@TT_TT_TOOTHED_WHEEL@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_60_2@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_1@@ && trigger_type != @@TT_TT_ONE@@ && trigger_type != @@TT_TT_60_2_VW@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_2@@} field = "Secondary channel", triggerInputPins2, { trigger_type != @@TT_TT_TOOTHED_WHEEL@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_60_2@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_1@@ && trigger_type != @@TT_TT_ONE@@ && trigger_type != @@TT_TT_60_2_VW@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_2@@}
field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != @@TT_TT_TOOTHED_WHEEL@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_60_2@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_1@@ && trigger_type != @@TT_TT_ONE@@ && trigger_type != @@TT_TT_60_2_VW@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_2@@} field = "Invert Secondary", invertSecondaryTriggerSignal, { trigger_type != @@TT_TT_TOOTHED_WHEEL@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_60_2@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_1@@ && trigger_type != @@TT_TT_ONE@@ && trigger_type != @@TT_TT_60_2_VW@@ && trigger_type != @@TT_TT_TOOTHED_WHEEL_36_2@@}
field = "#VVT or Cam for 60/2 goes here" field = "#VVT or Cam for 60/2 goes below"
field = "Cam Sync/VVT shaft #1 bank #1", camInputs1 field = "#If your engine has no exhaust cam sensor, use intake cam inputs"
field = "VVT shaft #2 bank #1", camInputs2 field = "Cam sensor bank 1 intake", camInputs1
field = "VVT shaft #1 bank #2", camInputs3 field = "Cam sensor bank 1 exhaust", camInputs2
field = "VVT shaft #2 bank #2", camInputs4 field = "Cam sensor bank 2 intake", camInputs3
field = "Invert Cam/VVT", invertCamVVTSignal field = "Cam sensor bank 2 exhaust", camInputs4
field = "Invert cam inputs", invertCamVVTSignal
panel = triggerInputComparator @@if_ts_show_trigger_comparator panel = triggerInputComparator @@if_ts_show_trigger_comparator