andreika-git
/
rusefi
mirror of https://github.com/andreika-git/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

knock and bore

This commit is contained in:
rusefi 2018-05-20 13:22:32 -04:00
parent b79e635756
commit c757009065
4 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
firmware/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Tue May 08 11:56:12 EDT 2018
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun May 20 13:21:41 EDT 2018
// begin
#ifndef ENGINE_CONFIGURATION_GENERATED_H_
#define ENGINE_CONFIGURATION_GENERATED_H_
@ -1038,7 +1038,8 @@ typedef struct {
*/
int hip9011PrescalerAndSDO;
/**
* kHz knock band override
* We calculate knock band based of cylinderBore
* Use this to override - kHz knock band override
* offset 328
*/
float knockBandCustom;
@ -2385,4 +2386,4 @@ typedef struct {
#endif
// end
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Tue May 08 11:56:12 EDT 2018
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun May 20 13:21:41 EDT 2018

2
firmware/integration/rusefi_config.txt
View File

@ -297,7 +297,7 @@ ThermistorConf iat;
int step1rpm;A secondary Rev limit engaged by the driver to help launch the vehicle faster;"rpm", 1, 0, 0, 20000.0, 2
int step1timing;;"deg", 1, 0, -180, 180, 2
int hip9011PrescalerAndSDO;6=8MHz todo solit two bit fields;"integer", 1, 0.0, 0.0, 32, 0
float knockBandCustom;+kHz knock band override;"kHz", 1, 0.0, 0.0, 10.0, 2
float knockBandCustom;+We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override;"kHz", 1, 0.0, 0.0, 10.0, 2
float[DWELL_CURVE_SIZE] sparkDwellRpmBins;On single-coil or wasted spark setups you have to lower dwell at high RPM;"RPM", 1, 0.0, 0.0, 18000, 2

5
firmware/tunerstudio/rusefi.ini
View File

@ -63,7 +63,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Tue May 08 11:56:12 EDT 2018
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun May 20 13:21:41 EDT 2018
pageSize = 20000
page = 1
@ -864,7 +864,7 @@ page = 1
cranking_baseFuel = "Fuel squirt duration while cranking\nA number of curves adjust this value according to CLT/IAT/TPS etc"
cranking_rpm = "Cranking mode threshold. Special cranking logic controls fuel and spark while RPM is below this threshold\nset cranking_rpm X"
crankingChargeAngle = "While cranking (which causes battery voltage to drop) we can calculate dwell time in shaft\ndegrees, not in absolute time as in running mode.\nset cranking_charge_angle X"
knockBandCustom = "kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
cylinderBore = "Cylinder diameter, in mm."
sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm"
fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nset algorithm X"
@ -2476,6 +2476,7 @@ cmd_stop_engine = "w\x00\x99\x00\x00"
field = "ChipSelect mode", hip9011CsPinMode, {isHip9011Enabled == 1}
field = "hip Output/stm input", hipOutputChannel, {isHip9011Enabled == 1}
field = "prescaler & SDO", hip9011PrescalerAndSDO, {isHip9011Enabled == 1}
field = "cylinder bore (mm)", cylinderBore, {isHip9011Enabled == 1}
field = "Band Freq override", knockBandCustom, {isHip9011Enabled == 1}
field = "SPI device", hip9011SpiDevice, {isHip9011Enabled == 1}
field = "SPI1sck", spi1SckMode, {isHip9011Enabled == 1}

1
firmware/tunerstudio/rusefi.input
View File

@ -1638,6 +1638,7 @@ cmd_stop_engine = "w\x00\x99\x00\x00"
field = "ChipSelect mode", hip9011CsPinMode, {isHip9011Enabled == 1}
field = "hip Output/stm input", hipOutputChannel, {isHip9011Enabled == 1}
field = "prescaler & SDO", hip9011PrescalerAndSDO, {isHip9011Enabled == 1}
field = "cylinder bore (mm)", cylinderBore, {isHip9011Enabled == 1}
field = "Band Freq override", knockBandCustom, {isHip9011Enabled == 1}
field = "SPI device", hip9011SpiDevice, {isHip9011Enabled == 1}
field = "SPI1sck", spi1SckMode, {isHip9011Enabled == 1}