From c9136c26220bc3320ca64b9b28f7c06fe726cc56 Mon Sep 17 00:00:00 2001 From: rusefi Date: Sun, 11 Feb 2018 19:46:21 +0300 Subject: [PATCH] sync --- hardware/frankenso/known_issues.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hardware/frankenso/known_issues.txt b/hardware/frankenso/known_issues.txt index 6dc0f0b656..783223a322 100644 --- a/hardware/frankenso/known_issues.txt +++ b/hardware/frankenso/known_issues.txt @@ -140,9 +140,8 @@ 138) RESOLVED IN R0.5 Verified diode polarities, new KICAD libs flipped pin 1 139) RESOLVED IN R0.5 Change D1004 from VS-50WQ04FNPBF to VS-50WQ04FN-M3 140) RESOLVED IN R0.5 D1006 "alt diode for D1004" app note needs to get back to power supply page - 141) RESOLVED IN R0.5 add an app note regarding not having separate injector/analog/else GND on Frankenso (NOTE ADDED TO PAGE 15) -142) RESOLVED IN R0.5 Some fab shops do not like soldering 0R 0805 on JUMPER footprint. Need to convert JPO1, JPO4 JPO5 "SM0805_jumper" +142) ++++++ re-check this ++++++ RESOLVED IN R0.5 Some fab shops do not like soldering 0R 0805 on JUMPER footprint. Need to convert JPO1, JPO4 JPO5 "SM0805_jumper" 143) move D12-D23 schematics to outputs page, add note mentioning that needed for IAC/VVT but not for injectors 144) RESOLVED IN R0.5 HL7 & HL8 silkscreen is missing 145) RESOLVED IN R0.4.3 HI/LO net names are confusing, and jumbled. @@ -171,6 +170,7 @@ 167) convert away from TEST package to reduce the change of mistaken fabrication: P1001 & W101 168) now that all mounting holes align let's move back side traces away from top-right and bottom-right mounting points. See https://rusefi.com/forum/viewtopic.php?f=4&t=569&p=28199#p28199 + For honda add-on / rewiring board -- Add 2A high side solinoid drive for VTec sol -- Add 3rd VR chip for 3rd signal