diff --git a/firmware/config/boards/kinetis/efifeatures.h b/firmware/config/boards/kinetis/efifeatures.h
index 3fbebb0e8c..864f846cb2 100644
--- a/firmware/config/boards/kinetis/efifeatures.h
+++ b/firmware/config/boards/kinetis/efifeatures.h
@@ -340,6 +340,7 @@
 #define LED_WARNING_BRAIN_PIN GPIOD_13
 
 #define LED_ERROR_BRAIN_PIN GPIOD_14
+#define LED_ERROR_BRAIN_PIN_MODE DEFAULT_OUTPUT
 
 #define EFI_WARNING_LED FALSE
 
diff --git a/firmware/config/boards/prometheus/efifeatures.h b/firmware/config/boards/prometheus/efifeatures.h
index ecf7eba807..0639fde61c 100644
--- a/firmware/config/boards/prometheus/efifeatures.h
+++ b/firmware/config/boards/prometheus/efifeatures.h
@@ -88,6 +88,8 @@
 
 #undef LED_ERROR_BRAIN_PIN
 #define LED_ERROR_BRAIN_PIN GPIOA_13
+#undef LED_ERROR_BRAIN_PIN_MODE
+#define LED_ERROR_BRAIN_PIN_MODE DEFAULT_OUTPUT
 
 #undef CONSOLE_MODE_SWITCH_PORT
 #undef CONFIG_RESET_SWITCH_PORT
diff --git a/firmware/config/boards/skeleton/efifeatures.h b/firmware/config/boards/skeleton/efifeatures.h
index 38d6d4886a..0dadd13dbd 100644
--- a/firmware/config/boards/skeleton/efifeatures.h
+++ b/firmware/config/boards/skeleton/efifeatures.h
@@ -118,6 +118,10 @@
 #define HAL_TRIGGER_USE_PAL FALSE
 #endif /* HAL_TRIGGER_USE_PAL */
 
+#ifndef HAL_TRIGGER_USE_ADC
+#define HAL_TRIGGER_USE_ADC FALSE
+#endif /* HAL_TRIGGER_USE_ADC */
+
 // TunerStudio support.
 #define EFI_TUNER_STUDIO TRUE
 #define EFI_TUNER_STUDIO_VERBOSE TRUE		// Debugging output
@@ -335,6 +339,9 @@
 #ifndef LED_ERROR_BRAIN_PIN
 #define LED_ERROR_BRAIN_PIN GPIOD_14
 #endif
+#ifndef LED_ERROR_BRAIN_PIN_MODE
+#define LED_ERROR_BRAIN_PIN_MODE DEFAULT_OUTPUT
+#endif
 
 // USART1 -> check defined STM32_SERIAL_USE_USART1
 // For GPS we have USART1. We can start with PB7 USART1_RX and PB6 USART1_TX
@@ -376,7 +383,7 @@
 #undef TS_SERIAL_DEVICE
 #undef TS_UART_MODE
 #define EFI_CONSOLE_SERIAL_DEVICE (&SD1)
-//#define EFI_CONSOLE_SERIAL_DEVICE (&SDU1)
+//#define EFI_CONSOLE_USB_DEVICE (&SDU1)
 #define EFI_UART_ECHO_TEST_MODE TRUE
 #define TS_UART_DEVICE (&UARTD3)
 #define TS_SERIAL_DEVICE (&SD3)
diff --git a/firmware/config/boards/subaru-ej20gn/efifeatures.h b/firmware/config/boards/subaru-ej20gn/efifeatures.h
index 93e09ab7cc..fc93b63a1d 100644
--- a/firmware/config/boards/subaru-ej20gn/efifeatures.h
+++ b/firmware/config/boards/subaru-ej20gn/efifeatures.h
@@ -80,6 +80,8 @@
 /* Red */
 #undef LED_ERROR_BRAIN_PIN
 #define LED_ERROR_BRAIN_PIN			GPIOG_7
+#undef LED_ERROR_BRAIN_PIN_MODE
+#define LED_ERROR_BRAIN_PIN_MODE DEFAULT_OUTPUT
 
 /* no console switch */
 #undef CONSOLE_MODE_SWITCH_PORT
diff --git a/firmware/config/stm32f4ems/efifeatures.h b/firmware/config/stm32f4ems/efifeatures.h
index 88c18d35c9..32713327c5 100644
--- a/firmware/config/stm32f4ems/efifeatures.h
+++ b/firmware/config/stm32f4ems/efifeatures.h
@@ -69,6 +69,10 @@
 #define HAL_TRIGGER_USE_PAL FALSE
 #endif /* HAL_TRIGGER_USE_PAL */
 
+#ifndef HAL_TRIGGER_USE_ADC
+#define HAL_TRIGGER_USE_ADC FALSE
+#endif /* HAL_TRIGGER_USE_ADC */
+
 /**
  * TunerStudio support.
  */
@@ -144,8 +148,12 @@
 #define BOARD_TLE8888_COUNT 	1
 #endif
 
+#ifndef BOARD_DRV8860_COUNT
+#define BOARD_DRV8860_COUNT         0
+#endif
+
 // todo: move this outside of efifeatures.h
-#define BOARD_EXT_GPIOCHIPS			(BOARD_TLE6240_COUNT + BOARD_MC33972_COUNT + BOARD_TLE8888_COUNT)
+#define BOARD_EXT_GPIOCHIPS			(BOARD_TLE6240_COUNT + BOARD_MC33972_COUNT + BOARD_TLE8888_COUNT + BOARD_DRV8860_COUNT)
 
 // todo: move this outside of efifeatures.h
 #define BOARD_EXT_PINREPOPINS 24
@@ -242,6 +250,8 @@
 #define EFI_USB_SERIAL TRUE
 #endif
 
+#define EFI_CONSOLE_USB_DEVICE (&SDU1)
+
 /**
  * While we embed multiple PnP configurations into the same firmware binary, these marcoses give us control
  * over which configurations go into the binary
@@ -381,6 +391,9 @@
 #ifndef LED_ERROR_BRAIN_PIN
 #define LED_ERROR_BRAIN_PIN GPIOD_14
 #endif
+#ifndef LED_ERROR_BRAIN_PIN_MODE
+#define LED_ERROR_BRAIN_PIN_MODE DEFAULT_OUTPUT
+#endif
 
 // USART1 -> check defined STM32_SERIAL_USE_USART1
 // For GPS we have USART1. We can start with PB7 USART1_RX and PB6 USART1_TX
diff --git a/firmware/config/stm32f7ems/efifeatures.h b/firmware/config/stm32f7ems/efifeatures.h
index dcfeacf284..a66f52edee 100644
--- a/firmware/config/stm32f7ems/efifeatures.h
+++ b/firmware/config/stm32f7ems/efifeatures.h
@@ -49,8 +49,12 @@
 #define BOARD_TLE8888_COUNT 	1
 #endif
 
+#ifndef BOARD_DRV8860_COUNT
+#define BOARD_DRV8860_COUNT 	0
+#endif
+
 // todo: move this outside of efifeatures.h
-#define BOARD_EXT_GPIOCHIPS			(BOARD_TLE6240_COUNT + BOARD_MC33972_COUNT + BOARD_TLE8888_COUNT)
+#define BOARD_EXT_GPIOCHIPS			(BOARD_TLE6240_COUNT + BOARD_MC33972_COUNT + BOARD_TLE8888_COUNT + BOARD_DRV8860_COUNT)
 
 
 #undef EFI_CAN_SUPPORT