hellen on a bike: both TS and SD card logs report -32v on secondary TPS and secondary PPS #6376

only:clean-up

firmware/console/binary/output_channels.txt

@@ -393,11 +393,11 @@ float mapFast
 	uint16_t autoscale actualLastInjectionStage2;@@GAUGE_NAME_FUEL_LAST_INJECTION_STAGE_2@@;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 3
 
 	uint8_t autoscale injectorDutyCycleStage2;@@GAUGE_NAME_FUEL_INJ_DUTY_STAGE_2@@;"%",{1/2}, 0, 0, 0, 0
-	uint8_t adc13bitCounter
+	uint8_t unusedByteHere
 
 	uint8_t fastAdcErrorsCount
 	uint8_t deviceUid
-	uint16_t unexpectedAdcSample
+	uint16_t unusedAdcSample
 
 	uint8_t sadDwellRatioCounter
 	uint8_t injectionPrimingCounter

firmware/hw_layer/adc/adc_inputs_onchip.cpp

@@ -240,16 +240,10 @@ adcsample_t AdcDevice::getAvgAdcValue(adc_channel_e hwChannel) {
 //			criticalError("fast ADC unexpected sample %d", sample);
 //		} else
 		if (sample > ADC_MAX_VALUE) {
-			if (!engineConfiguration->skipADC12bitAssert) {
-				criticalError("ADC unexpected sample %d at %ld uptime. Please report and use skipADC12bitAssert to disable.",
+ 			criticalError("ADC unexpected sample %d at %ld uptime.",
 				sample,
 				(uint32_t)getTimeNowS());
 		}
-			engine->outputChannels.unexpectedAdcSample = sample;
-			// sad hack which works around https://github.com/rusefi/rusefi/issues/6376 which we do not understand
-			sample = sample & ADC_MAX_VALUE;
-			engine->outputChannels.adc13bitCounter++;
-		}
 		result += sample;
 		index += numChannels;
 	}

firmware/integration/rusefi_config.txt

@@ -1212,7 +1212,7 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
 	bit devBit5
 	bit devBit6
 	bit devBit7
-	bit skipADC12bitAssert
+	bit unusedSkipWasHere
 	bit invertExhaustCamVVTSignal,"Falling","Rising"
 	bit enableKnockSpectrogram
 

firmware/tunerstudio/tunerstudio.template.ini

@@ -3117,7 +3117,6 @@ cmd_set_engine_type_default					= "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
 		field = "Turbo Speed Multiplier",					turboSpeedSensorMultiplier
 		field = "Throttle inlet pressure sensor",			throttleInletPressureChannel
 		field = "Compressor discharge pressure sensor",		compressorDischargePressureChannel
-		field = skipADC12bitAssert,     skipADC12bitAssert
 
 	dialog = fuelLevelDialog,				"Fuel Level Sensor"
 		field = "Input channel",						fuelLevelSensor