auto-sync

firmware/controllers/algo/engine.cpp

@@ -50,7 +50,6 @@ Engine::Engine() {
 }
 
 void Engine::precalc(engine_configuration_s *engineConfiguration) {
-	sparkTable.init(DWELL_CURVE_SIZE, sparkAtable, sparkBtable);
 	sparkTable.preCalc(engineConfiguration->sparkDwellBins, engineConfiguration->sparkDwell);
 }
 

firmware/controllers/algo/engine.h

@@ -83,6 +83,10 @@ typedef struct {
 	adc_channel_e channel;
 } Thermistor;
 
+#define MAF_DECODING_CACHE_SIZE 256
+
+#define MAF_DECODING_CACHE_MULT (MAF_DECODING_CACHE_SIZE / 5.0)
+
 class Engine {
 public:
 	Engine();
@@ -112,6 +116,11 @@ public:
 
 	TriggerShape triggerShape;
 
+	/**
+	 * pre-calculated offset for given sequence index within engine cycle
+	 * not cylinder ID
+	 * todo: better name?
+	 */
 	float angleExtra[IGNITION_PIN_COUNT];
 	NamedOutputPin *ignitionPin[IGNITION_PIN_COUNT];
 
@@ -142,10 +151,22 @@ public:
 	uint32_t beforeIgnitionSch;
 	uint32_t ignitionSchTime;
 
-	float sparkAtable[DWELL_CURVE_SIZE];
+	/**
-	float sparkBtable[DWELL_CURVE_SIZE];
+	 * fast spark dwell time interpolation helper
+	 * todo: finish the implementation and
+	 */
+	Table2D<DWELL_CURVE_SIZE> sparkTable;
+
+	/**
+	 * fast MAF decoding lookup table with ~0.2 volt step
+	 * This table is build based on MAF decoding curve
+	 */
+	float mafDecodingLookup[MAF_DECODING_CACHE_SIZE];
+
+	float mafDecoding[MAF_DECODING_COUNT];
+	float mafDecodingBins[MAF_DECODING_COUNT];
+
 
-	Table2D sparkTable;
 	void precalc(engine_configuration_s *engineConfiguration);
 
 	void updateSlowSensors();

firmware/controllers/algo/rusefi_types.h

@@ -50,6 +50,8 @@ typedef void (*Void)(void);
 #define LE_COMMAND_LENGTH 200
 #define LE_COMMAND_COUNT 16
 
+#define MAF_DECODING_COUNT 256
+
 typedef char le_formula_t[LE_COMMAND_LENGTH];
 
 #define HW_MAX_ADC_INDEX 16

firmware/controllers/core/table_helper.cpp

@@ -20,30 +20,6 @@ void setTableBin2(float array[], int size, float l, float r, float precision) {
 	}
 }
 
-void Table2D::init(int size, float *aTable, float *bTable) {
-	this->size = size;
-	this->aTable = aTable;
-	this->bTable = bTable;
-}
-
-void Table2D::preCalc(float *bin, float *values) {
-	this->bin = bin;
-	for (int i = 0; i < size - 1; i++) {
-		float x1 = bin[i];
-		float x2 = bin[i + 1];
-		if (x1 == x2) {
-			firmwareError("Same x1 and x2 in interpolate: %f/%f", x1, x2);
-			return;
-		}
-
-		float y1 = values[i];
-		float y2 = values[i + 1];
-
-		aTable[i] = INTERPOLATION_A(x1, y1, x2, y2);
-		bTable[i] = y1 - aTable[i] * x1;
-	}
-}
-
 void setTableBin(float array[], int size, float from, float to) {
 	setTableBin2(array, size, from, to, 0.01);
 }

firmware/controllers/core/table_helper.h

@@ -25,16 +25,35 @@ private:
 	int initialized;
 };
 
+template<int SIZE>
 class Table2D {
 public:
-	void init(int size, float *aTable, float *bTable);
 	void preCalc(float *bin, float *values);
-	int size;
+	float aTable[SIZE];
-	float *aTable;
+	float bTable[SIZE];
-	float *bTable;
 	float *bin;
 };
 
+template<int SIZE>
+void Table2D<SIZE>::preCalc(float *bin, float *values) {
+	this->bin = bin;
+	for (int i = 0; i < SIZE - 1; i++) {
+		float x1 = bin[i];
+		float x2 = bin[i + 1];
+		if (x1 == x2) {
+			firmwareError("Same x1 and x2 in interpolate: %f/%f", x1, x2);
+			return;
+		}
+
+		float y1 = values[i];
+		float y2 = values[i + 1];
+
+		aTable[i] = INTERPOLATION_A(x1, y1, x2, y2);
+		bTable[i] = y1 - aTable[i] * x1;
+	}
+}
+
+
 template<int RPM_BIN_SIZE, int LOAD_BIN_SIZE>
 void Map3D<RPM_BIN_SIZE, LOAD_BIN_SIZE>::init(float table[RPM_BIN_SIZE][LOAD_BIN_SIZE]) {
   for (int k = 0; k < LOAD_BIN_SIZE; k++) {