etbCalibrationOnStart
This commit is contained in:
rusEfi
parent
0aec02ffb1
commit
fc3b7ec1bd
|
|
@ -596,9 +596,12 @@ void initElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
|
|||
if (!engine->engineState.hasEtbPedalPositionSensor) {
|
||||
return;
|
||||
}
|
||||
#if 0
|
||||
// not alive code
|
||||
autoTune.SetOutputStep(0.1);
|
||||
#endif
|
||||
|
||||
#if ! EFI_UNIT_TEST
|
||||
#if 0 && ! EFI_UNIT_TEST
|
||||
percent_t startupThrottlePosition = getTPS(PASS_ENGINE_PARAMETER_SIGNATURE);
|
||||
if (absF(startupThrottlePosition - engineConfiguration->etbNeutralPosition) > STARTUP_NEUTRAL_POSITION_ERROR_THRESHOLD) {
|
||||
/**
|
||||
|
|
@ -613,6 +616,22 @@ void initElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
|
|||
|
||||
startETBPins(PASS_ENGINE_PARAMETER_SIGNATURE);
|
||||
|
||||
if (engineConfiguration->etbCalibrationOnStart) {
|
||||
etb1.dcMotor.Set(70);
|
||||
chThdSleep(600);
|
||||
grabTPSIsWideOpen();
|
||||
etb1.dcMotor.Set(-70);
|
||||
chThdSleep(600);
|
||||
grabTPSIsClosed();
|
||||
}
|
||||
|
||||
|
||||
#if EFI_PROD_CODE
|
||||
// manual duty cycle control without PID. Percent value from 0 to 100
|
||||
addConsoleActionNANF(CMD_ETB_DUTY, setThrottleDutyCycle);
|
||||
#endif
|
||||
|
||||
#if EFI_PROD_CODE && 0
|
||||
tuneWorkingPidSettings.pFactor = 1;
|
||||
tuneWorkingPidSettings.iFactor = 0;
|
||||
tuneWorkingPidSettings.dFactor = 0;
|
||||
|
|
@ -622,9 +641,6 @@ void initElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
|
|||
tuneWorkingPidSettings.maxValue = 100;
|
||||
tuneWorkingPidSettings.periodMs = 100;
|
||||
|
||||
#if EFI_PROD_CODE
|
||||
// manual duty cycle control without PID. Percent value from 0 to 100
|
||||
addConsoleActionNANF(CMD_ETB_DUTY, setThrottleDutyCycle);
|
||||
// this is useful once you do "enable etb_auto"
|
||||
addConsoleActionF("set_etbat_output", setTempOutput);
|
||||
addConsoleActionF("set_etbat_step", setAutoStep);
|
||||
|
|
@ -632,6 +648,7 @@ void initElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
|
|||
addConsoleActionI("set_etbat_offset", setAutoOffset);
|
||||
#endif /* EFI_PROD_CODE */
|
||||
|
||||
|
||||
etbPid.reset();
|
||||
|
||||
etbController.Start();
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Sep 24 18:34:53 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:14 EDT 2019
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -1579,6 +1579,9 @@ struct engine_configuration_s {
|
|||
/**
|
||||
offset 1464 bit 30 */
|
||||
bool useFSIO13ForIdleMinValue : 1;
|
||||
/**
|
||||
offset 1464 bit 31 */
|
||||
bool unusedBit31 : 1;
|
||||
/**
|
||||
* offset 1468
|
||||
*/
|
||||
|
|
@ -1682,10 +1685,40 @@ struct engine_configuration_s {
|
|||
bool useTPSAdvanceTable : 1;
|
||||
/**
|
||||
offset 1476 bit 20 */
|
||||
bool unused_1484_bit_20 : 1;
|
||||
bool etbCalibrationOnStart : 1;
|
||||
/**
|
||||
offset 1476 bit 21 */
|
||||
bool unused_1484_bit_21 : 1;
|
||||
/**
|
||||
offset 1476 bit 22 */
|
||||
bool unused_1484_bit_22 : 1;
|
||||
/**
|
||||
offset 1476 bit 23 */
|
||||
bool unused_1484_bit_23 : 1;
|
||||
/**
|
||||
offset 1476 bit 24 */
|
||||
bool unused_1484_bit_24 : 1;
|
||||
/**
|
||||
offset 1476 bit 25 */
|
||||
bool unused_1484_bit_25 : 1;
|
||||
/**
|
||||
offset 1476 bit 26 */
|
||||
bool unused_1484_bit_26 : 1;
|
||||
/**
|
||||
offset 1476 bit 27 */
|
||||
bool unused_1484_bit_27 : 1;
|
||||
/**
|
||||
offset 1476 bit 28 */
|
||||
bool unused_1484_bit_28 : 1;
|
||||
/**
|
||||
offset 1476 bit 29 */
|
||||
bool unused_1484_bit_29 : 1;
|
||||
/**
|
||||
offset 1476 bit 30 */
|
||||
bool unused_1484_bit_30 : 1;
|
||||
/**
|
||||
offset 1476 bit 31 */
|
||||
bool unused_1484_bit_31 : 1;
|
||||
/**
|
||||
* offset 1480
|
||||
*/
|
||||
|
|
@ -2834,4 +2867,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Sep 24 18:34:53 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:14 EDT 2019
|
||||
|
|
|
|||
|
|
@ -547,6 +547,8 @@
|
|||
#define etbBiasBins_offset_hex f30
|
||||
#define etbBiasValues_offset 3920
|
||||
#define etbBiasValues_offset_hex f50
|
||||
#define etbCalibrationOnStart_offset 1476
|
||||
#define etbCalibrationOnStart_offset_hex 5c4
|
||||
#define etbDeadband_offset 3960
|
||||
#define etbDeadband_offset_hex f78
|
||||
#define etbFreq_offset 2514
|
||||
|
|
@ -1877,10 +1879,28 @@
|
|||
#define unused1133_offset_hex 2a4
|
||||
#define unused1234234_offset 2042
|
||||
#define unused1234234_offset_hex 7fa
|
||||
#define unused_1484_bit_20_offset 1476
|
||||
#define unused_1484_bit_20_offset_hex 5c4
|
||||
#define unused_1484_bit_21_offset 1476
|
||||
#define unused_1484_bit_21_offset_hex 5c4
|
||||
#define unused_1484_bit_22_offset 1476
|
||||
#define unused_1484_bit_22_offset_hex 5c4
|
||||
#define unused_1484_bit_23_offset 1476
|
||||
#define unused_1484_bit_23_offset_hex 5c4
|
||||
#define unused_1484_bit_24_offset 1476
|
||||
#define unused_1484_bit_24_offset_hex 5c4
|
||||
#define unused_1484_bit_25_offset 1476
|
||||
#define unused_1484_bit_25_offset_hex 5c4
|
||||
#define unused_1484_bit_26_offset 1476
|
||||
#define unused_1484_bit_26_offset_hex 5c4
|
||||
#define unused_1484_bit_27_offset 1476
|
||||
#define unused_1484_bit_27_offset_hex 5c4
|
||||
#define unused_1484_bit_28_offset 1476
|
||||
#define unused_1484_bit_28_offset_hex 5c4
|
||||
#define unused_1484_bit_29_offset 1476
|
||||
#define unused_1484_bit_29_offset_hex 5c4
|
||||
#define unused_1484_bit_30_offset 1476
|
||||
#define unused_1484_bit_30_offset_hex 5c4
|
||||
#define unused_1484_bit_31_offset 1476
|
||||
#define unused_1484_bit_31_offset_hex 5c4
|
||||
#define unused_board_984_31_offset 744
|
||||
#define unused_board_984_31_offset_hex 2e8
|
||||
#define unused_former_warmup_target_afr_offset 2096
|
||||
|
|
@ -1889,6 +1909,8 @@
|
|||
#define unusedAnotherOne_offset_hex 2e8
|
||||
#define unusedAtBoardConfigurationEnd_offset 980
|
||||
#define unusedAtBoardConfigurationEnd_offset_hex 3d4
|
||||
#define unusedBit31_offset 1464
|
||||
#define unusedBit31_offset_hex 5b8
|
||||
#define unusedErrorPin_offset 2040
|
||||
#define unusedErrorPin_offset_hex 7f8
|
||||
#define unusedFlexFuelSensor_offset 3100
|
||||
|
|
|
|||
|
|
@ -739,6 +739,7 @@ bit useFSIO5ForCriticalIssueEngineStop;Sometimes we just have to shut the engine
|
|||
bit useFSIO4ForSeriousEngineWarning;Sometimes we have to miss injection on purpose to attract driver's attention
|
||||
bit useFSIO12ForIdleOffset;
|
||||
bit useFSIO13ForIdleMinValue;
|
||||
bit unusedBit31
|
||||
|
||||
adc_channel_e hipOutputChannel;
|
||||
adc_channel_e acSwitchAdc;A/C button input handled as analogue input
|
||||
|
|
@ -768,8 +769,18 @@ bit useFixedBaroCorrFromMap
|
|||
bit useSeparateAdvanceForCranking;+This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.
|
||||
bit useAdvanceCorrectionsForCranking;+This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).
|
||||
bit useTPSAdvanceTable;+This flag allows to use TPS for ignition lookup while in Speed Density Fuel Mode
|
||||
bit unused_1484_bit_20
|
||||
bit etbCalibrationOnStart
|
||||
bit unused_1484_bit_21
|
||||
bit unused_1484_bit_22
|
||||
bit unused_1484_bit_23
|
||||
bit unused_1484_bit_24
|
||||
bit unused_1484_bit_25
|
||||
bit unused_1484_bit_26
|
||||
bit unused_1484_bit_27
|
||||
bit unused_1484_bit_28
|
||||
bit unused_1484_bit_29
|
||||
bit unused_1484_bit_30
|
||||
bit unused_1484_bit_31
|
||||
|
||||
uint32_t engineChartSize;;"count", 1, 0, 0, 300, 0
|
||||
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Sep 28 10:24:19 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:14 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -530,6 +530,7 @@ page = 1
|
|||
useFSIO4ForSeriousEngineWarning= bits, U32, 1464, [28:28], "false", "true"
|
||||
useFSIO12ForIdleOffset = bits, U32, 1464, [29:29], "false", "true"
|
||||
useFSIO13ForIdleMinValue= bits, U32, 1464, [30:30], "false", "true"
|
||||
unusedBit31 = bits, U32, 1464, [31:31], "false", "true"
|
||||
hipOutputChannel = bits, U08, 1468, [0:4] "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "Disabled", "PB12", "PB13", "PC14", "PC15", "PC16", "PC17", "PD3", "PD4", "PE2", "PE6", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
acSwitchAdc = bits, U08, 1469, [0:4] "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "Disabled", "PB12", "PB13", "PC14", "PC15", "PC16", "PC17", "PD3", "PD4", "PE2", "PE6", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
vRefAdcChannel = bits, U08, 1470, [0:4] "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "Disabled", "PB12", "PB13", "PC14", "PC15", "PC16", "PC17", "PD3", "PD4", "PE2", "PE6", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
|
@ -555,8 +556,18 @@ page = 1
|
|||
useSeparateAdvanceForCranking= bits, U32, 1476, [17:17], "false", "true"
|
||||
useAdvanceCorrectionsForCranking= bits, U32, 1476, [18:18], "false", "true"
|
||||
useTPSAdvanceTable = bits, U32, 1476, [19:19], "false", "true"
|
||||
unused_1484_bit_20 = bits, U32, 1476, [20:20], "false", "true"
|
||||
etbCalibrationOnStart = bits, U32, 1476, [20:20], "false", "true"
|
||||
unused_1484_bit_21 = bits, U32, 1476, [21:21], "false", "true"
|
||||
unused_1484_bit_22 = bits, U32, 1476, [22:22], "false", "true"
|
||||
unused_1484_bit_23 = bits, U32, 1476, [23:23], "false", "true"
|
||||
unused_1484_bit_24 = bits, U32, 1476, [24:24], "false", "true"
|
||||
unused_1484_bit_25 = bits, U32, 1476, [25:25], "false", "true"
|
||||
unused_1484_bit_26 = bits, U32, 1476, [26:26], "false", "true"
|
||||
unused_1484_bit_27 = bits, U32, 1476, [27:27], "false", "true"
|
||||
unused_1484_bit_28 = bits, U32, 1476, [28:28], "false", "true"
|
||||
unused_1484_bit_29 = bits, U32, 1476, [29:29], "false", "true"
|
||||
unused_1484_bit_30 = bits, U32, 1476, [30:30], "false", "true"
|
||||
unused_1484_bit_31 = bits, U32, 1476, [31:31], "false", "true"
|
||||
engineChartSize = scalar, U32, 1480, "count", 1, 0, 0, 300, 0
|
||||
idlePidRpmUpperLimit = scalar, S16, 1484, "RPM", 1, 0, 0, 9000, 0
|
||||
primeInjFalloffTemperature = scalar, S16, 1486, "*C", 1, 0, 0, 1000.0, 0
|
||||
|
|
@ -3451,6 +3462,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Throttle Pedal Up", throttlePedalUpVoltage
|
||||
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
|
||||
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
|
||||
field = etbCalibrationOnStart, etbCalibrationOnStart
|
||||
field = "No1 Direction #1", etb1_directionPin1, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No1 Direction #2", etb1_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb1_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
|
|
|
|||
|
|
@ -2457,6 +2457,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Throttle Pedal Up", throttlePedalUpVoltage
|
||||
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
|
||||
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
|
||||
field = etbCalibrationOnStart, etbCalibrationOnStart
|
||||
field = "No1 Direction #1", etb1_directionPin1, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No1 Direction #2", etb1_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb1_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Sep 28 10:24:24 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:42 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -530,6 +530,7 @@ page = 1
|
|||
useFSIO4ForSeriousEngineWarning= bits, U32, 1464, [28:28], "false", "true"
|
||||
useFSIO12ForIdleOffset = bits, U32, 1464, [29:29], "false", "true"
|
||||
useFSIO13ForIdleMinValue= bits, U32, 1464, [30:30], "false", "true"
|
||||
unusedBit31 = bits, U32, 1464, [31:31], "false", "true"
|
||||
hipOutputChannel = bits, U08, 1468, [0:4] "Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E","NONE","INVALID","INVALID","INVALID"
|
||||
acSwitchAdc = bits, U08, 1469, [0:4] "Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E","NONE","INVALID","INVALID","INVALID"
|
||||
vRefAdcChannel = bits, U08, 1470, [0:4] "Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E","NONE","INVALID","INVALID","INVALID"
|
||||
|
|
@ -555,8 +556,18 @@ page = 1
|
|||
useSeparateAdvanceForCranking= bits, U32, 1476, [17:17], "false", "true"
|
||||
useAdvanceCorrectionsForCranking= bits, U32, 1476, [18:18], "false", "true"
|
||||
useTPSAdvanceTable = bits, U32, 1476, [19:19], "false", "true"
|
||||
unused_1484_bit_20 = bits, U32, 1476, [20:20], "false", "true"
|
||||
etbCalibrationOnStart = bits, U32, 1476, [20:20], "false", "true"
|
||||
unused_1484_bit_21 = bits, U32, 1476, [21:21], "false", "true"
|
||||
unused_1484_bit_22 = bits, U32, 1476, [22:22], "false", "true"
|
||||
unused_1484_bit_23 = bits, U32, 1476, [23:23], "false", "true"
|
||||
unused_1484_bit_24 = bits, U32, 1476, [24:24], "false", "true"
|
||||
unused_1484_bit_25 = bits, U32, 1476, [25:25], "false", "true"
|
||||
unused_1484_bit_26 = bits, U32, 1476, [26:26], "false", "true"
|
||||
unused_1484_bit_27 = bits, U32, 1476, [27:27], "false", "true"
|
||||
unused_1484_bit_28 = bits, U32, 1476, [28:28], "false", "true"
|
||||
unused_1484_bit_29 = bits, U32, 1476, [29:29], "false", "true"
|
||||
unused_1484_bit_30 = bits, U32, 1476, [30:30], "false", "true"
|
||||
unused_1484_bit_31 = bits, U32, 1476, [31:31], "false", "true"
|
||||
engineChartSize = scalar, U32, 1480, "count", 1, 0, 0, 300, 0
|
||||
idlePidRpmUpperLimit = scalar, S16, 1484, "RPM", 1, 0, 0, 9000, 0
|
||||
primeInjFalloffTemperature = scalar, S16, 1486, "*C", 1, 0, 0, 1000.0, 0
|
||||
|
|
@ -3451,6 +3462,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Throttle Pedal Up", throttlePedalUpVoltage
|
||||
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
|
||||
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
|
||||
field = etbCalibrationOnStart, etbCalibrationOnStart
|
||||
field = "No1 Direction #1", etb1_directionPin1, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No1 Direction #2", etb1_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb1_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Sep 28 10:24:22 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:29 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -530,6 +530,7 @@ page = 1
|
|||
useFSIO4ForSeriousEngineWarning= bits, U32, 1464, [28:28], "false", "true"
|
||||
useFSIO12ForIdleOffset = bits, U32, 1464, [29:29], "false", "true"
|
||||
useFSIO13ForIdleMinValue= bits, U32, 1464, [30:30], "false", "true"
|
||||
unusedBit31 = bits, U32, 1464, [31:31], "false", "true"
|
||||
hipOutputChannel = bits, U08, 1468, [0:4] "18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","28 - AN volt 10","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8","40 - AN volt 9","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6","30 - AN volt 7","NONE","INVALID","INVALID","INVALID"
|
||||
acSwitchAdc = bits, U08, 1469, [0:4] "18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","28 - AN volt 10","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8","40 - AN volt 9","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6","30 - AN volt 7","NONE","INVALID","INVALID","INVALID"
|
||||
vRefAdcChannel = bits, U08, 1470, [0:4] "18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","28 - AN volt 10","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8","40 - AN volt 9","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6","30 - AN volt 7","NONE","INVALID","INVALID","INVALID"
|
||||
|
|
@ -555,8 +556,18 @@ page = 1
|
|||
useSeparateAdvanceForCranking= bits, U32, 1476, [17:17], "false", "true"
|
||||
useAdvanceCorrectionsForCranking= bits, U32, 1476, [18:18], "false", "true"
|
||||
useTPSAdvanceTable = bits, U32, 1476, [19:19], "false", "true"
|
||||
unused_1484_bit_20 = bits, U32, 1476, [20:20], "false", "true"
|
||||
etbCalibrationOnStart = bits, U32, 1476, [20:20], "false", "true"
|
||||
unused_1484_bit_21 = bits, U32, 1476, [21:21], "false", "true"
|
||||
unused_1484_bit_22 = bits, U32, 1476, [22:22], "false", "true"
|
||||
unused_1484_bit_23 = bits, U32, 1476, [23:23], "false", "true"
|
||||
unused_1484_bit_24 = bits, U32, 1476, [24:24], "false", "true"
|
||||
unused_1484_bit_25 = bits, U32, 1476, [25:25], "false", "true"
|
||||
unused_1484_bit_26 = bits, U32, 1476, [26:26], "false", "true"
|
||||
unused_1484_bit_27 = bits, U32, 1476, [27:27], "false", "true"
|
||||
unused_1484_bit_28 = bits, U32, 1476, [28:28], "false", "true"
|
||||
unused_1484_bit_29 = bits, U32, 1476, [29:29], "false", "true"
|
||||
unused_1484_bit_30 = bits, U32, 1476, [30:30], "false", "true"
|
||||
unused_1484_bit_31 = bits, U32, 1476, [31:31], "false", "true"
|
||||
engineChartSize = scalar, U32, 1480, "count", 1, 0, 0, 300, 0
|
||||
idlePidRpmUpperLimit = scalar, S16, 1484, "RPM", 1, 0, 0, 9000, 0
|
||||
primeInjFalloffTemperature = scalar, S16, 1486, "*C", 1, 0, 0, 1000.0, 0
|
||||
|
|
@ -3434,6 +3445,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Throttle Pedal Up", throttlePedalUpVoltage
|
||||
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
|
||||
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
|
||||
field = etbCalibrationOnStart, etbCalibrationOnStart
|
||||
field = "No1 Direction #1", etb1_directionPin1, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No1 Direction #2", etb1_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb1_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Sep 28 10:24:27 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:52 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -530,6 +530,7 @@ page = 1
|
|||
useFSIO4ForSeriousEngineWarning= bits, U32, 1464, [28:28], "false", "true"
|
||||
useFSIO12ForIdleOffset = bits, U32, 1464, [29:29], "false", "true"
|
||||
useFSIO13ForIdleMinValue= bits, U32, 1464, [30:30], "false", "true"
|
||||
unusedBit31 = bits, U32, 1464, [31:31], "false", "true"
|
||||
hipOutputChannel = bits, U08, 1468, [0:4] "Analog 3O","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","NONE","INVALID","INVALID","INVALID"
|
||||
acSwitchAdc = bits, U08, 1469, [0:4] "Analog 3O","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","NONE","INVALID","INVALID","INVALID"
|
||||
vRefAdcChannel = bits, U08, 1470, [0:4] "Analog 3O","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","NONE","INVALID","INVALID","INVALID"
|
||||
|
|
@ -555,8 +556,18 @@ page = 1
|
|||
useSeparateAdvanceForCranking= bits, U32, 1476, [17:17], "false", "true"
|
||||
useAdvanceCorrectionsForCranking= bits, U32, 1476, [18:18], "false", "true"
|
||||
useTPSAdvanceTable = bits, U32, 1476, [19:19], "false", "true"
|
||||
unused_1484_bit_20 = bits, U32, 1476, [20:20], "false", "true"
|
||||
etbCalibrationOnStart = bits, U32, 1476, [20:20], "false", "true"
|
||||
unused_1484_bit_21 = bits, U32, 1476, [21:21], "false", "true"
|
||||
unused_1484_bit_22 = bits, U32, 1476, [22:22], "false", "true"
|
||||
unused_1484_bit_23 = bits, U32, 1476, [23:23], "false", "true"
|
||||
unused_1484_bit_24 = bits, U32, 1476, [24:24], "false", "true"
|
||||
unused_1484_bit_25 = bits, U32, 1476, [25:25], "false", "true"
|
||||
unused_1484_bit_26 = bits, U32, 1476, [26:26], "false", "true"
|
||||
unused_1484_bit_27 = bits, U32, 1476, [27:27], "false", "true"
|
||||
unused_1484_bit_28 = bits, U32, 1476, [28:28], "false", "true"
|
||||
unused_1484_bit_29 = bits, U32, 1476, [29:29], "false", "true"
|
||||
unused_1484_bit_30 = bits, U32, 1476, [30:30], "false", "true"
|
||||
unused_1484_bit_31 = bits, U32, 1476, [31:31], "false", "true"
|
||||
engineChartSize = scalar, U32, 1480, "count", 1, 0, 0, 300, 0
|
||||
idlePidRpmUpperLimit = scalar, S16, 1484, "RPM", 1, 0, 0, 9000, 0
|
||||
primeInjFalloffTemperature = scalar, S16, 1486, "*C", 1, 0, 0, 1000.0, 0
|
||||
|
|
@ -3447,6 +3458,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Throttle Pedal Up", throttlePedalUpVoltage
|
||||
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
|
||||
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
|
||||
field = etbCalibrationOnStart, etbCalibrationOnStart
|
||||
field = "No1 Direction #1", etb1_directionPin1, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No1 Direction #2", etb1_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb1_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Sep 24 18:34:53 EDT 2019
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Sep 29 11:56:14 EDT 2019
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
|
@ -353,6 +353,7 @@ public class Fields {
|
|||
public static final int etb_pFactor_offset = 1736;
|
||||
public static final int etbBiasBins_offset = 3888;
|
||||
public static final int etbBiasValues_offset = 3920;
|
||||
public static final int etbCalibrationOnStart_offset = 1476;
|
||||
public static final int etbDeadband_offset = 3960;
|
||||
public static final int etbFreq_offset = 2514;
|
||||
public static final int etbIdleRange_offset = 972;
|
||||
|
|
@ -1224,13 +1225,23 @@ public class Fields {
|
|||
public static final int unrealisticRpmThreashold_offset = 760;
|
||||
public static final int unused1133_offset = 676;
|
||||
public static final int unused1234234_offset = 2042;
|
||||
public static final int unused_1484_bit_20_offset = 1476;
|
||||
public static final int unused_1484_bit_21_offset = 1476;
|
||||
public static final int unused_1484_bit_22_offset = 1476;
|
||||
public static final int unused_1484_bit_23_offset = 1476;
|
||||
public static final int unused_1484_bit_24_offset = 1476;
|
||||
public static final int unused_1484_bit_25_offset = 1476;
|
||||
public static final int unused_1484_bit_26_offset = 1476;
|
||||
public static final int unused_1484_bit_27_offset = 1476;
|
||||
public static final int unused_1484_bit_28_offset = 1476;
|
||||
public static final int unused_1484_bit_29_offset = 1476;
|
||||
public static final int unused_1484_bit_30_offset = 1476;
|
||||
public static final int unused_1484_bit_31_offset = 1476;
|
||||
public static final int unused_board_984_31_offset = 744;
|
||||
public static final int unused_former_warmup_target_afr_offset = 2096;
|
||||
public static final int unused_former_warmup_target_afr_offset_hex = 830;
|
||||
public static final int unusedAnotherOne_offset = 744;
|
||||
public static final int unusedAtBoardConfigurationEnd_offset = 980;
|
||||
public static final int unusedBit31_offset = 1464;
|
||||
public static final int unusedErrorPin_offset = 2040;
|
||||
public static final int unusedFlexFuelSensor_offset = 3100;
|
||||
public static final int unusedFormerWarmupAfrPid_offset = 1760;
|
||||
|
|
@ -1745,6 +1756,7 @@ public class Fields {
|
|||
public static final Field USEFSIO4FORSERIOUSENGINEWARNING = Field.create("USEFSIO4FORSERIOUSENGINEWARNING", 1464, FieldType.BIT, 28);
|
||||
public static final Field USEFSIO12FORIDLEOFFSET = Field.create("USEFSIO12FORIDLEOFFSET", 1464, FieldType.BIT, 29);
|
||||
public static final Field USEFSIO13FORIDLEMINVALUE = Field.create("USEFSIO13FORIDLEMINVALUE", 1464, FieldType.BIT, 30);
|
||||
public static final Field UNUSEDBIT31 = Field.create("UNUSEDBIT31", 1464, FieldType.BIT, 31);
|
||||
public static final Field HIPOUTPUTCHANNEL = Field.create("HIPOUTPUTCHANNEL", 1468, FieldType.INT8, adc_channel_e);
|
||||
public static final Field ACSWITCHADC = Field.create("ACSWITCHADC", 1469, FieldType.INT8, adc_channel_e);
|
||||
public static final Field VREFADCCHANNEL = Field.create("VREFADCCHANNEL", 1470, FieldType.INT8, adc_channel_e);
|
||||
|
|
@ -1770,8 +1782,18 @@ public class Fields {
|
|||
public static final Field USESEPARATEADVANCEFORCRANKING = Field.create("USESEPARATEADVANCEFORCRANKING", 1476, FieldType.BIT, 17);
|
||||
public static final Field USEADVANCECORRECTIONSFORCRANKING = Field.create("USEADVANCECORRECTIONSFORCRANKING", 1476, FieldType.BIT, 18);
|
||||
public static final Field USETPSADVANCETABLE = Field.create("USETPSADVANCETABLE", 1476, FieldType.BIT, 19);
|
||||
public static final Field UNUSED_1484_BIT_20 = Field.create("UNUSED_1484_BIT_20", 1476, FieldType.BIT, 20);
|
||||
public static final Field ETBCALIBRATIONONSTART = Field.create("ETBCALIBRATIONONSTART", 1476, FieldType.BIT, 20);
|
||||
public static final Field UNUSED_1484_BIT_21 = Field.create("UNUSED_1484_BIT_21", 1476, FieldType.BIT, 21);
|
||||
public static final Field UNUSED_1484_BIT_22 = Field.create("UNUSED_1484_BIT_22", 1476, FieldType.BIT, 22);
|
||||
public static final Field UNUSED_1484_BIT_23 = Field.create("UNUSED_1484_BIT_23", 1476, FieldType.BIT, 23);
|
||||
public static final Field UNUSED_1484_BIT_24 = Field.create("UNUSED_1484_BIT_24", 1476, FieldType.BIT, 24);
|
||||
public static final Field UNUSED_1484_BIT_25 = Field.create("UNUSED_1484_BIT_25", 1476, FieldType.BIT, 25);
|
||||
public static final Field UNUSED_1484_BIT_26 = Field.create("UNUSED_1484_BIT_26", 1476, FieldType.BIT, 26);
|
||||
public static final Field UNUSED_1484_BIT_27 = Field.create("UNUSED_1484_BIT_27", 1476, FieldType.BIT, 27);
|
||||
public static final Field UNUSED_1484_BIT_28 = Field.create("UNUSED_1484_BIT_28", 1476, FieldType.BIT, 28);
|
||||
public static final Field UNUSED_1484_BIT_29 = Field.create("UNUSED_1484_BIT_29", 1476, FieldType.BIT, 29);
|
||||
public static final Field UNUSED_1484_BIT_30 = Field.create("UNUSED_1484_BIT_30", 1476, FieldType.BIT, 30);
|
||||
public static final Field UNUSED_1484_BIT_31 = Field.create("UNUSED_1484_BIT_31", 1476, FieldType.BIT, 31);
|
||||
public static final Field ENGINECHARTSIZE = Field.create("ENGINECHARTSIZE", 1480, FieldType.INT);
|
||||
public static final Field IDLEPIDRPMUPPERLIMIT = Field.create("IDLEPIDRPMUPPERLIMIT", 1484, FieldType.INT16);
|
||||
public static final Field PRIMEINJFALLOFFTEMPERATURE = Field.create("PRIMEINJFALLOFFTEMPERATURE", 1486, FieldType.INT16);
|
||||
|
|
@ -2526,6 +2548,7 @@ public class Fields {
|
|||
USEFSIO4FORSERIOUSENGINEWARNING,
|
||||
USEFSIO12FORIDLEOFFSET,
|
||||
USEFSIO13FORIDLEMINVALUE,
|
||||
UNUSEDBIT31,
|
||||
HIPOUTPUTCHANNEL,
|
||||
ACSWITCHADC,
|
||||
VREFADCCHANNEL,
|
||||
|
|
@ -2551,8 +2574,18 @@ public class Fields {
|
|||
USESEPARATEADVANCEFORCRANKING,
|
||||
USEADVANCECORRECTIONSFORCRANKING,
|
||||
USETPSADVANCETABLE,
|
||||
UNUSED_1484_BIT_20,
|
||||
ETBCALIBRATIONONSTART,
|
||||
UNUSED_1484_BIT_21,
|
||||
UNUSED_1484_BIT_22,
|
||||
UNUSED_1484_BIT_23,
|
||||
UNUSED_1484_BIT_24,
|
||||
UNUSED_1484_BIT_25,
|
||||
UNUSED_1484_BIT_26,
|
||||
UNUSED_1484_BIT_27,
|
||||
UNUSED_1484_BIT_28,
|
||||
UNUSED_1484_BIT_29,
|
||||
UNUSED_1484_BIT_30,
|
||||
UNUSED_1484_BIT_31,
|
||||
ENGINECHARTSIZE,
|
||||
IDLEPIDRPMUPPERLIMIT,
|
||||
PRIMEINJFALLOFFTEMPERATURE,
|
||||
|
|
|
|||
|
|
@ -1,7 +1,10 @@
|
|||
package com.rusefi.ui.etb;
|
||||
|
||||
import com.rusefi.config.generated.Fields;
|
||||
import com.rusefi.core.Sensor;
|
||||
import com.rusefi.ldmp.generated.ElectronicThrottleMeta;
|
||||
import com.rusefi.ui.config.BitConfigField;
|
||||
import com.rusefi.ui.config.ConfigField;
|
||||
import com.rusefi.ui.livedocs.LiveDocPanel;
|
||||
import com.rusefi.ui.storage.Node;
|
||||
import com.rusefi.ui.util.UiUtils;
|
||||
|
|
@ -42,6 +45,11 @@ public class EtbCommandsPanel {
|
|||
testParameters.add(new JLabel("For example:"));
|
||||
testParameters.add(new JLabel("set etb_p 1.1"));
|
||||
|
||||
testParameters.add(new BitConfigField(Fields.PAUSEETBCONTROL, "Pause").getContent());
|
||||
testParameters.add(new ConfigField(Fields.ETB_PFACTOR, "pFactor").getContent());
|
||||
testParameters.add(new ConfigField(Fields.ETB_IFACTOR, "iFactor").getContent());
|
||||
testParameters.add(new ConfigField(Fields.ETB_DFACTOR, "dFactor").getContent());
|
||||
|
||||
content.setBorder(BorderFactory.createTitledBorder("Commands"));
|
||||
|
||||
content.add(testParameters);
|
||||
|
|
|
|||
Loading…
Reference in New Issue