allowFlashWhileRunning() -> mcuCanFlashWhileRunning() - true if MCU
can flash while continue code execution. Dual bank mode on STM32.
New allowFlashWhileRunning() return true if MCU can write its own
flash while keep runnig OR settings are stored in external storage.
Return true for ADC channel that is "second virtual" input on pin
Ie muxed with external switch.
This helps avoid attemp to mark pin used twice while configuring ADC
* at32_common.cpp: MCU type detection helper
* sayHello(): tick rate is CH_CFG_ST_FREQUENCY
* eficonsole: do isStm32F42x() check for STM32 only
* sayHello(): more info about AT32
* Update ChibiOS
* eficonsole: typo
* smt32_common.mk: reduce copy-paste
* SENT: sentPins is not used
* hw: stm32: add ICU helper
* hw: stm32: icu helpers: also return timer base clock
* SENT: icu: use helper to get ICU & channel and AF
* SENT: icu: use CPU ticks for pulse measurements
* hw: stm32: icu: cleanup
* extract
* guard
* put some back
* put back
* slow is actually 500hz so slow is fine here
* no magic
* fix printFullAdcReport
* cast
* if we turn those off is it happy
* stub cypress/kinetis
* guard fast stuff better
* bad merge
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421)
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
* this flag did nothing
* header dedupe
* mre fix again
* get all dependencies in mpu_util.h
* guard can/spi
* more dedupe
* pragma once
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
Andrey Gusakov
rusefillc
andreika-git
rusefillc
Matthew Kennedy
kon