bbf161752e
TCU usability #2118
2020-12-22 14:03:54 -05:00
af9bb07eba
dead code
2020-12-22 07:10:09 -05:00
6168bcea80
Fix gpio reinit race condition ( #2098 )
...
* fix unregister api for gpio
* consumers
* guard with a critical section
* index
* guard less
* unregister under lock
* fix reinit
* dead flag
* fix most tests
* initialize properly
* initialize properly
* assertions in tests
* fix message
* we must lock earlier to be truly safe
* this was using huge memory
* devirtualize
2020-12-18 17:18:12 -05:00
7277b04039
force a pwm cycle start (skip cycles) if late ( #2097 )
...
* skip cycles if late
* fail at lower count
* start at -1
2020-12-18 08:21:18 -05:00
ca79f99be5
More explicit handling of CPU exhaustion #2093
2020-12-17 22:21:12 -05:00
99392d7951
More explicit handling of CPU exhaustion #2093
2020-12-17 21:15:28 -05:00
ca0f3ba240
HW CI is flaky :( #2063
...
more detailed error messages
2020-12-17 20:22:04 -05:00
2f690ca6b2
nicer "pins" names
2020-12-17 17:00:00 -05:00
a159ecbf0a
reduce GPIO complexity ( #2051 )
2020-12-10 19:18:14 -05:00
f2426677db
start fuel pump as soon as trigger events happen ( #2038 )
...
* switch pump fsio logic
* value collision
* fuel pump in tests
* mock time since trigger
* test fp
* init pin in test
* fix gpio outputs in tests
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-10 01:23:24 -05:00
e226024a5c
MRE pin reuse state validation fails #2006
2020-12-03 15:42:48 -05:00
ba33a758e8
avoid float -> int64 conversion #1977
...
both cases have to be relatively small durations of time cherry picking...
2020-12-03 13:30:17 -05:00
a3a49b02ed
fix gpio the right way ( #1990 )
...
* fix the right way
* use the api
* explain
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-11-27 00:24:41 -05:00
641959b9a3
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 17:48:09 -05:00
24c9e54cde
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 16:20:13 -05:00
1238758c0f
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 00:16:59 -05:00
63900429a6
Starter is engaged on start-up in pull-up configuration #1969
2020-11-25 23:59:11 -05:00
b189d85228
Starter is engaged on start-up in pull-up configuration #1969
2020-11-25 23:38:43 -05:00
3878cbb550
Starter is engaged on start-up in pull-up configuration #1969
...
maintainability
2020-11-19 23:57:06 -05:00
f3b7a1d9da
Remove lockAnyContext, replace with CriticalSectionLocker ( #1938 )
...
* switch to CriticalSectionLocker
* that's just about all
* clean up last usage
* include hpp for sim
* need the cpp wrappers in the makefile too
* include dir
* include
2020-11-19 06:56:02 -05:00
47fbb92bff
Starter seems to be engaged forever fix #1965
2020-11-18 23:54:30 -05:00
a9e0bffbbd
Starter seems to be engaged forever #1965
2020-11-18 22:47:40 -05:00
53f6f1e661
Starter seems to be engaged forever #1965
2020-11-18 22:42:41 -05:00
6e4517be8c
adjust microsecond_timer api ( #1952 )
...
* change timer api
* don't need all that
2020-11-16 18:50:13 -05:00
77b70f47f7
GDI Epic #1448
2020-11-09 21:41:13 -05:00
9aff6e3103
Output pin init/deinit needs a linked list #1803
2020-11-09 21:10:48 -05:00
b2ad14fa63
docs
2020-11-09 19:47:10 -05:00
73b18b4a01
Output pin init/deinit needs a linked list #1803
2020-11-06 15:45:15 -05:00
cbb00a1a85
Output pin init/deinit needs a linked list #1803
2020-11-05 18:42:45 -05:00
8e8b5256c8
Output pin init/deinit needs a linked list #1803
2020-11-05 17:52:30 -05:00
edb016a76e
Output pin init/deinit needs a linked list #1803
2020-11-05 17:23:09 -05:00
a51b68bbed
GDI Epic #1448
2020-11-03 13:19:56 -05:00
a7c97b3508
Output pin init/deinit needs a linked list #1803
2020-11-03 12:28:13 -05:00
256650aa88
Output pin init/deinit needs a linked list #1803
2020-11-03 11:31:40 -05:00
c0ac1649e2
Output pin init/deinit needs a linked list #1803
2020-11-03 11:01:43 -05:00
3d7a6c6729
Output pin init/deinit needs a linked list #1803
2020-11-03 10:51:54 -05:00
7de1fc8e2a
Output pin init/deinit needs a linked list #1803
...
trying to make things more consistent & smarter
2020-11-03 00:46:03 -05:00
e5ad8eb5c0
Output pin init/deinit needs a linked list #1803
2020-11-03 00:21:39 -05:00
2c322006d8
Output pin init/deinit needs a linked list #1803
2020-11-03 00:09:42 -05:00
13b4b02873
typo
2020-11-02 23:52:26 -05:00
0f5f0a549b
this stuff is just too dead
2020-11-02 23:46:41 -05:00
7eeb60a8a0
trigger/scheduler perf improvements ( #1885 )
...
* avoid 64b on hot path
* no tooth log when fast
* use crit section locker
* final
* only flip pins if not also self stim
* only trace if doing work
* slightly drop lateDelay
* trace if not bailing out
2020-10-16 11:04:27 -04:00
605e2590f1
buffered writer - progress on #1463 ( #1875 )
...
* add buffered writer
* rename
2020-10-12 15:10:34 -04:00
018db0df94
Fix #1873 - compute dynamic PWM iterationLimit ( #1874 )
...
* fix
* remove define
* add an assert
* typo
* don't do a 64bit divide
* oh that's a float
2020-10-11 20:25:38 -04:00
c885db32f0
use expected for event queue next event ( #1859 )
...
* use expected for event queue next event
* minor cleanup
* tests
2020-10-05 13:53:34 -04:00
dd6b02d555
we don't need two loops ( #1855 )
2020-10-05 08:57:00 -04:00
aad5d987a2
pwm perf ( #1858 )
...
* pwm perf
* this trace is now redundant
2020-10-05 08:23:30 -04:00
a9d669ba83
HW CI has failed 11 times since Oct 2 #1849
2020-10-03 20:53:23 -04:00
dd7dd3b8eb
HW CI has failed 11 times since Oct 2 #1849
2020-10-03 20:25:37 -04:00
c8b4fac456
move scheduling to its own file ( #1842 )
...
* move scheduling to its own file
* header
* protip don't include a cpp file
2020-10-01 17:55:03 -04:00
rusefillc
Matthew Kennedy
rusefi