20b5219def
Auto-generated configs and docs
2020-10-25 23:27:30 +00:00
f37ed597c5
fix double deadtime ( #1904 )
...
* move global correction factor to fuel mass
* tests
* the fix
2020-10-25 00:12:05 -04:00
15363e9a41
Update date
2020-10-25 00:58:09 +00:00
779381a125
Update date
2020-10-24 00:55:30 +00:00
10c1ad7698
use fuel model ( #1901 )
...
* use fuel model
* spit'n'polish
2020-10-23 20:25:47 -04:00
27207dde9c
Auto-generated configs and docs
2020-10-23 19:48:01 +00:00
d84cd385ce
add Injector pressure sensor ( #1898 )
...
* add sensor type
* add config
* initialize injector pressure
* add UI
2020-10-23 15:46:16 -04:00
0ae003dcd3
Auto-generated configs and docs
2020-10-23 16:27:21 +00:00
8e11675afd
Tle8888 big update 1 ( #1892 )
...
* smart gpio: fix tle8888 direct pin mapping for MRE
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888
* TLE8888: cleanup
* TLE8888: do not reset driver private data on WD/undervoltage reset
* TLE8888: diagnostic updates
* TLE8888 driver: BIG driver rework
* TLE8888: check SPI answers for abnormal states
Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed
Keep tracking last accessed register and check with the next reply.
* TLE8888: debug clean-up
* TLE8888: implement spi array write
This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS
* TLE8888: fix PP outputs in OD mode
* TLE8888: cleanup register definitions
* TLE8888: run separate driver thread for each chip instance
Calculating poll interval for few chips become more complex, avoid
this running thread for each device.
* TLE8888: fix cypress and kinetic compilation
Both platforms define its own MAX and cause redifination error if
common.h is included in driver.
* MRE: update mapping.yaml and fix direct pin mapping for TLE8888
* TLE8888: diagnnostic: disable switch off in case of overcurrent
For all output, use current limiting instead
* TLE8888: check for overvoltage on OUT8..OUT13
* TLE8888: add TODO note about how to recover from failure condition
Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.
* TLE8888: save few bytes of RAM
* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888
Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c
* TLE8888: reorder code, cleanup
* TLE8888: mode all debug/statisctic to per-chip struct
* TLE8888: rework poll interval calculation
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
2020-10-23 12:25:30 -04:00
ec17daeee7
Auto-generated configs and docs
2020-10-23 16:25:10 +00:00
82587e97cf
Auto-generated configs and docs
2020-10-23 11:33:40 +00:00
4e249889a6
implement fuel pressure sensors ( #1897 )
...
* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
2020-10-23 07:31:47 -04:00
a7a475a1df
B6
2020-10-23 00:39:22 -04:00
7a65b7e715
Auto-generated configs and docs
2020-10-23 03:26:03 +00:00
d3a7d9e329
Auto-generated configs and docs
2020-10-23 03:19:42 +00:00
93da2717af
Update date
2020-10-23 00:55:50 +00:00
3f9dd26478
Auto-generated configs and docs
2020-10-22 02:51:46 +00:00
6605877326
gppwm debug ( #1895 )
...
* dbg gppwm
* fix channel
* TS guard
2020-10-21 22:49:38 -04:00
e9ab6f9b04
Auto-generated configs and docs
2020-10-22 02:37:10 +00:00
9060aff46c
code style
2020-10-21 22:13:18 -04:00
2a64162b43
Update date
2020-10-22 00:55:13 +00:00
24fb167a34
Update date
2020-10-21 00:54:27 +00:00
2ce0bef9b9
refactoring
2020-10-19 22:44:44 -04:00
e0a5c3dc12
GDI Epic #1448
2020-10-19 22:04:06 -04:00
4b920250c6
Update date
2020-10-20 00:54:38 +00:00
dbf3b68e33
Auto-generated configs and docs
2020-10-19 12:06:22 +00:00
06f92807cc
second PID config for wastegate ( #1889 )
...
* remove
* cleanup
* implement ETB parts
* hook up to boost controller
* tests
* consume
* add cfg field
* ui maybe
* fix
* fix
* add wastegate config test
2020-10-19 08:04:27 -04:00
42bfad807b
Etb wastegate hookup ( #1888 )
...
* remove
* cleanup
* implement ETB parts
* hook up to boost controller
* tests
2020-10-18 21:57:04 -04:00
c0d45d5b82
Update date
2020-10-19 00:54:39 +00:00
ee5d0bf07b
remove ( #1887 )
2020-10-18 20:49:42 -04:00
44653da2e5
Etb function cfg: actually read config ( #1884 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-18 17:26:38 -04:00
09f7667bd5
Update date
2020-10-18 00:55:31 +00:00
a87c28a8ad
dead legacy code - current implementation is definitely more correct
2020-10-17 18:46:07 -04:00
b24f173892
refactoring: better method name
2020-10-17 18:45:08 -04:00
665900d76a
GDI Epic #1448
2020-10-17 14:53:56 -04:00
a68cbae0dc
Remove trigger listener list ( #1886 )
...
* avoid 64b on hot path
* no tooth log when fast
* use crit section locker
* final
* only flip pins if not also self stim
* only trace if doing work
* slightly drop lateDelay
* trace if not bailing out
* remove listener array
2020-10-17 08:00:11 -04:00
7099ca6cb6
Update date
2020-10-17 00:52:43 +00:00
7eeb60a8a0
trigger/scheduler perf improvements ( #1885 )
...
* avoid 64b on hot path
* no tooth log when fast
* use crit section locker
* final
* only flip pins if not also self stim
* only trace if doing work
* slightly drop lateDelay
* trace if not bailing out
2020-10-16 11:04:27 -04:00
749282c807
more safe parts probably ( #1883 )
2020-10-15 22:04:42 -04:00
a2c23d4a6c
Update date
2020-10-16 00:53:08 +00:00
a8057cfc16
write SD header using new Writer class ( #1882 )
...
* write header
* hooray, free memory!
* fix test
* is there really this much free space...?
* no, there is not
2020-10-15 16:00:13 -04:00
4aac58065e
Auto-generated configs and docs
2020-10-15 12:59:24 +00:00
2083b34cf9
simplify getTimeNowNt() ( #1876 )
...
* remove old impl
* add cpp wrapper to os_access
* clean up os_access
* remove touchTimeCounter
* new impl
* put comment about lock free impl
* include cpp wrappers for BL
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-10-15 08:57:13 -04:00
906675166e
Auto-generated configs and docs
2020-10-15 02:42:20 +00:00
568ec91fc0
fix temp sensor & validate it ( #1879 )
...
* fix temp sensor & validate
* smaller here should work
2020-10-14 22:39:16 -04:00
299a345c1c
etb function config 1 ( #1881 )
...
* this should all be safe...
* test fix
2020-10-14 22:02:09 -04:00
6cafebc6bd
Update date
2020-10-15 00:52:07 +00:00
2855e04234
start using BufferedWriter ( #1878 )
...
* do the part up to actual usage
* borrow some memory for now
2020-10-14 20:06:05 -04:00
b39df90612
Update date
2020-10-14 00:51:46 +00:00
2a597d4786
Update date
2020-10-13 00:51:50 +00:00
605e2590f1
buffered writer - progress on #1463 ( #1875 )
...
* add buffered writer
* rename
2020-10-12 15:10:34 -04:00
12a720dde2
QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871
2020-10-11 22:57:31 -04:00
b77c4ab55a
QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase fix #1871
2020-10-11 22:46:08 -04:00
5bb332138a
Update date
2020-10-12 00:51:55 +00:00
018db0df94
Fix #1873 - compute dynamic PWM iterationLimit ( #1874 )
...
* fix
* remove define
* add an assert
* typo
* don't do a 64bit divide
* oh that's a float
2020-10-11 20:25:38 -04:00
99923b17b7
Auto-generated configs and docs
2020-10-11 23:07:39 +00:00
94a6399e56
QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871
2020-10-11 19:05:56 -04:00
2d9a63b8ef
Auto-generated configs and docs
2020-10-11 21:49:05 +00:00
13f96c3504
Update date
2020-10-11 00:52:48 +00:00
c15083efac
Auto-generated configs and docs
2020-10-10 03:36:50 +00:00
29c2d692ee
Simple transmission 2 ( #1870 )
...
* simple trans controller
* don't need check
* we can loop!
* use efi::size
* pin mode configuration
* set pin mode
* switch to RegisteredOutputPin
* size
* add to makefile
* fixes
* fixes
* wat
* output pin, and ts stuff
* use SimpleTransmissionController
* include
* grrr
* grrr
* move to separate file
* fix includes
* try
* semicolon stupid
* try pointers
* try
* add to makefile
* wat
* try
* try
* try
* try
* try
* try
* try
* try
* try
* try
* try
* try
* try
* try
* undo
* more idiomatic maybe
* remove logger
* try init func
* try
* try
* try init fn
* try
* switch
* try
* try
* ifndef
* try
* try
* ifndef
* use def dug
* INJECT FIRST
* try
* try
* duh
2020-10-09 23:34:45 -04:00
b76afc46e4
Update date
2020-10-10 00:50:10 +00:00
2638fb63fa
Auto-generated configs and docs
2020-10-09 21:19:04 +00:00
83fe9dae77
ign mode overrides ( #1869 )
2020-10-09 17:16:49 -04:00
d1ec5522ac
Auto-generated configs and docs
2020-10-09 06:11:02 +00:00
0f52622409
Auto-generated configs and docs
2020-10-09 06:07:46 +00:00
a5d4dedcea
Update date
2020-10-09 00:49:56 +00:00
a71528a458
SD card logs not valid for REO #1864
2020-10-08 20:35:32 -04:00
07a905b1fe
revering functional part of
...
Etb function cfg, try again #1860
try again from #1831
2020-10-08 17:09:00 -04:00
c5d4150377
Auto-generated configs and docs
2020-10-08 18:14:09 +00:00
1bce3aa4c0
Etb function cfg, try again ( #1860 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-08 14:12:03 -04:00
24503cd31c
fix fuel pump ( #1865 )
2020-10-07 22:30:24 -04:00
7098c50592
Update date
2020-10-08 00:41:29 +00:00
a9e2a5cd1e
fix ( #1863 )
2020-10-07 14:59:24 -04:00
cb47cde068
switch from float to expected<float> ( #1862 )
2020-10-06 22:33:00 -04:00
8cff16e797
FSIO refactoring ( #1861 )
...
* better fsio tests
* condense operators
* minor parser cleanup too
* comments, too!
2020-10-06 21:54:49 -04:00
3ded888df3
Update date
2020-10-07 00:49:32 +00:00
5f15b8e48b
tachPulsePerRev needs a safer default, MRE config needs a value
2020-10-06 00:56:49 -04:00
c49a241993
Update date
2020-10-06 00:48:58 +00:00
c9fdde4472
remove virtual calls from hot path ( #1857 )
...
* const ref-ify
* no virtual ❌
* even more const
* tests
* fix tests
2020-10-05 16:42:50 -04:00
5925a5f4bd
const ref-ify trigger ( #1856 )
...
* const ref-ify
* tests
2020-10-05 14:22:59 -04:00
c885db32f0
use expected for event queue next event ( #1859 )
...
* use expected for event queue next event
* minor cleanup
* tests
2020-10-05 13:53:34 -04:00
dd6b02d555
we don't need two loops ( #1855 )
2020-10-05 08:57:00 -04:00
aad5d987a2
pwm perf ( #1858 )
...
* pwm perf
* this trace is now redundant
2020-10-05 08:23:30 -04:00
86b5edecbc
missing iat ( #1854 )
2020-10-04 21:33:54 -04:00
d9fb908b4f
Update date
2020-10-05 00:50:15 +00:00
3aa4f2bd97
trigger decode cleanup and perf ( #1853 )
...
* trigger decode cleanup
* test config ptr patchup
* disable CDM by default
2020-10-04 19:29:26 -04:00
348b387483
Trigger performance: variable gapTrackingLength #1851
...
cool change but looks to have made zero difference
2020-10-04 13:05:49 -04:00
53ece86a88
fixing Kinetis build
2020-10-04 03:04:01 -04:00
96a126d60f
60/2 perf grab #1850
...
unused parameter
2020-10-04 02:09:12 -04:00
efacf26554
Re-applying #1841
...
Revert "HW CI has failed 11 times since Oct 2 #1849"
This reverts commit 7f6a8311
2020-10-04 01:54:29 -04:00
030ec42ac7
60/2 perf grab #1850
...
a) removing more of stack validating - one validation within the deepest method would be enough
b) un-wrapping main callback loop for explicit order of execution
2020-10-04 01:43:02 -04:00
6b95579706
60/2 perf grab #1850
2020-10-04 01:26:29 -04:00
c9d3d1f01a
60/2 perf grab #1850
2020-10-04 01:04:15 -04:00
e2ca642f97
60/2 perf grab #1850
2020-10-04 00:15:40 -04:00
c047397cf7
Auto-generated configs and docs
2020-10-04 02:02:15 +00:00
367436454d
HW CI has failed 11 times since Oct 2 #1849
...
Revert "ETB function config (#1831 )"
This reverts commit af59c45a
2020-10-03 22:00:00 -04:00
7f6a831117
HW CI has failed 11 times since Oct 2 #1849
...
Revert "configure all sample times - fix MRE knock sampling (#1841 )"
This reverts commit b3596f89
2020-10-03 21:36:09 -04:00
9273659d69
Merge remote-tracking branch 'origin/master' into master
2020-10-03 20:53:29 -04:00
a9d669ba83
HW CI has failed 11 times since Oct 2 #1849
2020-10-03 20:53:23 -04:00
ed60cd3bce
Update date
2020-10-04 00:51:05 +00:00
dd7dd3b8eb
HW CI has failed 11 times since Oct 2 #1849
2020-10-03 20:25:37 -04:00
dce24274a2
HW CI has failed 11 times since Oct 2 #1849
2020-10-03 19:45:39 -04:00
17c87dbd90
Auto-generated configs and docs
2020-10-03 23:29:56 +00:00
2c0db8e970
Auto-generated configs and docs
2020-10-03 14:42:14 +00:00
5cf8ce1db8
Merge remote-tracking branch 'origin/master' into master
2020-10-03 10:39:54 -04:00
e5b8e0e515
new VVT trigger shape? #1847
2020-10-03 10:39:43 -04:00
71d603bcc9
Auto-generated configs and docs
2020-10-03 14:27:55 +00:00
4c403fbb22
Auto-generated configs and docs
2020-10-03 14:06:31 +00:00
1b37b2a0b8
Auto-generated configs and docs
2020-10-03 00:52:49 +00:00
af59c45adb
ETB function config ( #1831 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-02 20:51:02 -04:00
b3596f8969
configure all sample times - fix MRE knock sampling ( #1841 )
...
* configure all sample times
* smpr 1 vs smpr 2
* man I can't type
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-10-02 20:49:56 -04:00
20312b0009
Update date
2020-10-03 00:47:49 +00:00
4eb2d8b42c
Auto-generated configs and docs
2020-10-02 18:35:16 +00:00
c40228d77e
Update date
2020-10-02 00:47:06 +00:00
c8b4fac456
move scheduling to its own file ( #1842 )
...
* move scheduling to its own file
* header
* protip don't include a cpp file
2020-10-01 17:55:03 -04:00
a05b06f5f0
print red ( #1843 )
2020-10-01 17:14:25 -04:00
7a9a623b07
Auto-generated configs and docs
2020-10-01 04:06:05 +00:00
d9713c84a4
Update date
2020-10-01 00:49:04 +00:00
90b8c991da
Auto-generated configs and docs
2020-10-01 00:21:49 +00:00
6ac9aad358
display base fuel mass in milligrams ( #1838 )
...
* switch to mg
* use the correct thing
* gauge scaling
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-09-30 20:19:51 -04:00
476c55fd4e
Auto-generated configs and docs
2020-09-30 23:20:30 +00:00
33ddf08e1d
Update date
2020-09-30 00:47:11 +00:00
5f72947d6f
Auto-generated configs and docs
2020-09-29 10:36:50 +00:00
16bfd39bac
Remove dead & useless config ( #1834 )
...
* remove dead config
* remove enum
2020-09-29 06:34:39 -04:00
6b7c42b85e
Auto-generated configs and docs
2020-09-29 01:41:06 +00:00
d6bc2a70e7
transmission solenoid control ( #1833 )
...
* simple trans controller
* don't need check
* we can loop!
* use efi::size
* pin mode configuration
* set pin mode
* switch to RegisteredOutputPin
* size
2020-09-28 21:39:03 -04:00
fb2fa9aa62
Auto-generated configs and docs
2020-09-29 01:20:53 +00:00
23e0851101
adding 1+16 trigger
2020-09-28 21:18:47 -04:00
c2efe95ee0
refactoring: magic constants
2020-09-28 21:11:04 -04:00
27570472cc
Auto-generated configs and docs
2020-09-29 01:07:43 +00:00
53412d1dd9
Merge remote-tracking branch 'origin/master' into master
2020-09-28 20:59:58 -04:00
1adc9444a8
removing third copy of same values
2020-09-28 20:58:21 -04:00
fbc25ecca4
Update date
2020-09-29 00:46:48 +00:00
4d0b953129
switch to pass by reference ( #1832 )
2020-09-28 19:17:17 -04:00
589acfc7db
Auto-generated configs and docs
2020-09-28 20:34:48 +00:00
f1c04efefa
replace ETB index with function enum ( #1807 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
2020-09-28 16:33:07 -04:00
c8c673b8e0
Auto-generated configs and docs
2020-09-28 18:47:21 +00:00
55e26836f1
Update date
2020-09-28 00:47:27 +00:00
17fc77de71
Auto-generated configs and docs
2020-09-27 15:03:29 +00:00
6ddaa0a334
Auto-generated configs and docs
2020-09-27 13:59:42 +00:00
bf6b9e3bb2
Auto-generated configs and docs
2020-09-27 12:51:50 +00:00
0e24f9c5af
Output pin init/deinit needs a linked list #1803
2020-09-27 07:58:22 -04:00
eae7995782
Output pin init/deinit needs a linked list #1803
2020-09-27 07:48:38 -04:00
f5b1157d05
Auto-generated configs and docs
2020-09-27 11:38:53 +00:00
cf7c946c51
Output pin init/deinit needs a linked list #1803
2020-09-27 07:37:43 -04:00
97982cc22f
Output pin init/deinit needs a linked list #1803
2020-09-27 07:26:56 -04:00
0b628cea75
Output pin init/deinit needs a linked list #1803
2020-09-27 07:22:09 -04:00
7e4644249e
Update date
2020-09-27 00:48:28 +00:00
1e503c2ada
Output pin init/deinit needs a linked list #1803
...
more fun around pin referencing
2020-09-26 05:04:27 -04:00
4b661ef929
Update date
2020-09-26 00:45:57 +00:00
6d3c488f2b
Update date
2020-09-25 00:46:43 +00:00
4be3582142
Update date
2020-09-24 00:46:48 +00:00
6e5a3fbbe9
Hellen says fix cypress build ( #1818 )
...
* fix compilation
* fresh generated files
* more files
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-23 14:06:22 -04:00
1491a0c229
Update date
2020-09-23 00:45:21 +00:00
a5aedf9967
Auto-generated configs and docs
2020-09-22 20:27:30 +00:00
8d8e8ec260
Launch control - experimental ( #1816 )
...
* Update tachometer.cpp
Initial implementation of E30 M3 Tach output solution #907 , unit_test plus debugging next
* tacho unit tests
First successfull unit test for tachometer
* RAM adjustment so it would link
* refactoring tacho, broken!
* starting to make some progress...still fails after a few seconds
* Rework with SW PWM
* Update after code review
* unit_test update
* First working unit_test
* Update .gitignore
* Update engine_controller.cpp
* Update engine_controller.cpp
* Update tachometer.h
* Update test_tacho.cpp
* Switched UART DMA on
* Revert "Switched UART DMA on"
This reverts commit 4a23974c431e0e7fd760595d2161e74e6854897e.
* enable launch control
make use of already existent code + integration
* Delete compile_frankenso_all.sh
remove it since it is not part of the project
* Update main_trigger_callback.cpp
broke unit_Tests
Co-authored-by: rusefi <rusefi@users.noreply.github.com>
2020-09-22 16:25:27 -04:00
2614020c6b
Auto-generated configs and docs
2020-09-22 09:29:44 +00:00
91ea6cd91b
Auto-generated configs and docs
2020-09-22 08:59:31 +00:00
ab41bccd21
helping CI
2020-09-22 04:57:07 -04:00
cc3381c175
Auto-generated configs and docs
2020-09-22 07:49:56 +00:00
a70e24bf6c
Mre sw knock detection ( #1815 )
...
* Add SW knock control to MRE on AT4
* Update software_knock.cpp
cleanup
* use knock only for final build
* adjust RAM
* Update engine_controller.cpp
Adjust RAM for HW QC special to build
2020-09-22 03:48:17 -04:00
900842da16
Update date
2020-09-22 00:45:38 +00:00
2d771018e8
unit test for start/stop hardware and pin repository #1811
2020-09-21 12:29:01 -04:00
c957541cf4
ADC progress
2020-09-21 06:10:25 -04:00
df551d77fb
move AEM xseries lambda to new sensor ( #1764 )
...
* lambda sens
* fix init
* new sensor aem
* comment
* g
* format
* x
* guard
* fix init for tests
* fix
* put back
* put back
* fix
* fix init
* why is this different
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-09-21 06:01:54 -04:00
f2edf843e5
Update can_vss.cpp ( #1813 )
...
update vss reading from can
2020-09-21 05:55:09 -04:00
8bb5ffba05
Update date
2020-09-21 00:46:18 +00:00
749c3e5f1d
Merge remote-tracking branch 'origin/master' into master
2020-09-20 14:04:33 -04:00
e69167c8f0
Revert "reorder ADC channel index #1763"
...
This reverts commit 67bc72eb
2020-09-20 14:04:24 -04:00
68012c18b7
Debounce refactor ( #1809 )
...
* 1,2,4,7,9
* 6
* fix type mismatch
* change field
* comment
* Revert "comment"
This reverts commit f7ce8ed48d015490ed82d692270198817569b5a3.
* Revert "Revert "comment""
This reverts commit 99f2d5cadcbf444bf58acf9e57a6fed61355d5be.
* Revert "change field"
This reverts commit 55ec050cd947696cdffccae6b29fe48d95ab5f17.
* rename var
* comments
* use func in init
* default values
* remove redundant check
2020-09-20 14:01:00 -04:00
67bc72ebd3
reorder ADC channel index #1763
...
we forgot about something
2020-09-20 13:59:54 -04:00
f5114d7f1b
Auto-generated configs and docs
2020-09-20 17:45:00 +00:00
ec7de00cd4
Update date
2020-09-20 00:46:52 +00:00
02f8c8e470
Auto-generated configs and docs
2020-09-19 21:19:20 +00:00
8ebdf6fcdc
fix type mismatch ( #1808 )
...
* fix type mismatch
* comment
* change field
* switch to efitimesec16_t
* add typedef
* add type to configdefinition
* build
2020-09-19 17:17:44 -04:00
5515dc1abe
better QC procedure
2020-09-19 16:07:09 -04:00
96ec6ef9ac
better QC procedure
2020-09-19 04:57:07 -04:00
1657e499ce
better QC procedure
2020-09-19 04:39:32 -04:00
b91a656a51
docs
2020-09-19 04:38:59 -04:00
c1699d91d0
fix closed loop fuel ( #1797 )
...
* fix
* add a test
* signature
2020-09-19 03:44:01 -04:00
d988bdca9f
Update date
2020-09-19 00:44:27 +00:00
1fc55da3ca
two throttles one thread ( #1806 )
...
* two throttles one thread
* look at all this RAM!
2020-09-18 13:47:49 -04:00
dfbbdff4b1
Output pin init/deinit needs a linked list #1803
2020-09-18 13:29:17 -04:00
fbdd1b0cb0
Merge remote-tracking branch 'origin/master' into master
2020-09-18 13:01:23 -04:00
35db68a6ae
Output pin init/deinit needs a linked list #1803
2020-09-18 13:01:09 -04:00
7d0aa5827d
Auto-generated configs and docs
2020-09-18 07:05:55 +00:00
3d6a6398ac
Dedicated sensors for wastegate + idle position ( #1805 )
...
* config
* add sensor
* listen to new adc channels
* fix
* add gauges to TS
* add gauge values
* TS UI
2020-09-18 10:04:07 +03:00
6c88cbe533
Output pin init/deinit needs a linked list #1803
2020-09-17 19:41:28 -04:00
599d3458ba
Merge remote-tracking branch 'origin/master' into master
2020-09-17 19:35:59 -04:00
c37e1c8b70
Output pin config #1803
...
alternative to #1800
2020-09-17 19:35:43 -04:00
794a8fed09
Auto-generated configs and docs
2020-09-17 11:57:18 +00:00
cb78c2ab08
Update date
2020-09-17 00:44:12 +00:00
fd505c6c30
Update date
2020-09-16 00:44:01 +00:00
331626864c
Auto-generated configs and docs
2020-09-15 08:35:57 +00:00
d761f523a0
add shift matrix and pin config ( #1798 )
...
* add shift matrix and pin config
* try
2020-09-15 11:34:09 +03:00
837fd920e4
Update date
2020-09-15 00:44:08 +00:00
e3056bb397
Engine runs we can disengage the starter #1795
2020-09-14 00:45:15 -04:00
df4b156b64
Update date
2020-09-14 00:44:19 +00:00
97cb9f45bd
logging simplification: switch bare functions to member functions: try the second ( #1794 )
...
* first pass
* first pass
* const means we don't have to check!
* static
* test fixup
* fix sniffer
2020-09-13 11:49:25 +03:00
63dfc66d48
Update date
2020-09-13 00:45:25 +00:00
256a4a2637
Revert "logging simplification: switch bare functions to member functions ( #1788 )"
...
This reverts commit d941bdc5
2020-09-12 04:36:24 -04:00
bb9db5b935
Auto-generated configs and docs
2020-09-12 07:37:31 +00:00
d2b6eedc3e
Update date
2020-09-12 00:42:56 +00:00
a5e74e04d4
Auto-generated configs and docs
2020-09-12 00:22:40 +00:00
d941bdc502
logging simplification: switch bare functions to member functions ( #1788 )
...
* first pass
* first pass
* const means we don't have to check!
* static
* test fixup
2020-09-12 03:08:11 +03:00
31befbb7d8
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/config/boards/common_make.bat
# firmware/controllers/algo/engine.cpp
# firmware/controllers/system_fsio.txt
2020-09-11 03:59:06 -04:00
24c4b0a446
Auto-generated configs and docs
2020-09-11 02:18:18 +00:00
337106cd24
DebounceButton A/C switch ( #1782 )
...
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
2020-09-10 22:16:20 -04:00
9903b0a1c5
Hellen says merge #1772 Kinetis needs more help
2020-09-10 22:02:02 -04:00
89bb08ddb6
Hellen says merge #1772 Kinetis needs help
2020-09-10 21:51:58 -04:00
55c553e85a
FSIO sync with reality?
2020-09-10 21:38:41 -04:00
de572db0bc
sync with reality?
2020-09-10 21:36:37 -04:00
370c107793
Hellen says merge #1772 progress
2020-09-10 21:26:21 -04:00
acc2720170
Merge remote-tracking branch 'origin/master' into master
2020-09-10 21:17:29 -04:00
3329e2259b
Hellen says merge #1772 system fsio
2020-09-10 21:16:33 -04:00
ec366b68ee
Hellen says merge #1772 main relay progress
2020-09-10 21:11:02 -04:00
d33afbc0d1
Hellen says merge #1772 system fsio
2020-09-10 21:09:56 -04:00
56dc017757
Hellen says merge #1772 main relay progress
2020-09-10 21:08:39 -04:00
79feb34f14
Update date
2020-09-11 00:43:44 +00:00
eebded8caa
scale tables using type system ( #1776 )
...
* store scale in the type
* efi ratio
* boost control scaling
* fix boost tests
2020-09-10 18:44:10 -04:00
6ef1065bdf
Update date
2020-09-10 00:40:38 +00:00
2840d2c276
Hellen says merge #1772 error pin logic
2020-09-09 18:35:17 -04:00
8bcc387fa7
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/core/error_handling.cpp
# firmware/controllers/system/efi_gpio.cpp
2020-09-09 18:23:04 -04:00
3af04d7824
Hellen says merge #1772 error pin
2020-09-09 18:18:59 -04:00
28ee902c62
Auto-generated configs and docs
2020-09-09 20:54:16 +00:00
d2d0ffa1ee
remove tach output pin ( #1779 )
...
* remove from cfg
* cfg
* rip out impl
* efi gpio
2020-09-09 16:52:23 -04:00
e4775814a3
Auto-generated configs and docs
2020-09-09 20:28:47 +00:00
f6cbce48ed
minor TS changes ( #1778 )
...
* minor
* fiix
2020-09-09 16:27:13 -04:00
f5d9263ad1
switch start/stop to ButtonDebounce ( #1777 )
2020-09-09 08:22:15 +01:00
8188ab7d90
Auto-generated configs and docs
2020-09-09 06:44:30 +00:00
aa1436dfc3
Update date
2020-09-09 00:45:08 +00:00
4d3ba4850c
Bench-testing for ALL assigned output pins #1758
2020-09-08 17:41:32 -04:00
5b7b051448
Merge remote-tracking branch 'origin/master' into master
2020-09-08 17:22:43 -04:00
2312b0ae57
Adc improvements ( #1765 )
...
* ADC: move DMA buffer outside of AdcDevice (save few bytes)
* ADC: inlcude fast channels to debug output
* ADC: save some CPU ticks (disabled until fully tested)
* ADC: simplify
2020-09-08 17:20:55 -04:00
8197209719
https://github.com/rusefi/rusefi/issues/1775
2020-09-08 17:20:14 -04:00
0c0cc630df
Auto-generated configs and docs
2020-09-08 21:17:04 +00:00
6d1acb40f8
Selectable AFR axis override ( #1771 )
...
* add config fields
* config options
* new output channels
* dump out state to ts
* s
* implement override
* enums
* this test is no longer used
* test new behavior
* old
* comments
* impl
* unhide option
* fix
* tests
2020-09-08 17:15:18 -04:00
cab4cd0df2
Debounce pin management ( #1760 )
...
* add linked list
* macros, and use in buttonshift
* unit_tests macros
* add extern
* add parens
* move extern
* move extern
* move buttonDebounceListHead
* move buttonDebouncePointerHead
* merge gore
* undo
* reduce unused size
* don't store pointer if already initialized
* few changes
* remove oldPin
* fix merge conflict
* merge in changes commited to wrong branch
* fix definition
* out of class?
* brute force programming
* fix few problemos
* am confuse
* am confuse
* am confuse
* am confuse
* oldPin snuck in
* move to public?
* define again
* try constexpr
* def in cpp
* remove constexpr
* fix def
* fix?
* update active
* fix a few things
2020-09-08 11:29:38 -04:00
8f8d4eccaf
Hellen says merge #1772 progress
2020-09-08 00:15:09 -04:00
04ec880ab6
Update date
2020-09-08 00:43:16 +00:00
02bc0a9608
microRusEFI used as Body Control Module BCM BCU
2020-09-07 20:06:13 -04:00
67f305f48a
microRusEFI used as Body Control Module BCM BCU
2020-09-07 17:59:59 -04:00
689adf19d5
Auto-generated configs and docs
2020-09-07 21:40:31 +00:00
a1625bd2e2
microRusEFI used as Body Control Module BCM BCU
2020-09-07 17:38:51 -04:00
c8c90ed16b
microRusEFI used as Body Control Module BCM BCU
2020-09-07 17:12:00 -04:00
67c6a2750c
Auto-generated configs and docs
2020-09-07 21:06:55 +00:00
0c1ac0c932
microRusEFI used as Body Control Module BCM BCU
2020-09-07 16:25:00 -04:00
9bea1190a4
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/algo/engine_configuration.cpp
2020-09-07 15:55:43 -04:00
6b82191ab7
Hellen says merge #1772
...
where is implementation?
2020-09-07 15:54:31 -04:00
GitHub build-firmware Action
Matthew Kennedy
Andrey G
rusefi
rusefillc
David Holdeman
andreika-git
shadowm60
David Holdeman