ff867b9301
fix warnings ( #1282 )
...
* warnings
* don't need to template those
2020-04-12 09:39:14 -04:00
8006c0a548
CLT/IAT/Aux in the new sensor world ( #1269 )
...
* hook up clt
* init test
* probably fix test
* aux temp
* relax checking
* more significant figures
* remove old aux temp
* hand generate
* claim RAM
* move to ccm
* subscribe
* info printing
* warnings
* raise high voltage failure threshold
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-07 16:07:09 -04:00
595df15dfd
fix ( #1268 )
2020-04-06 09:00:26 -04:00
345bf61bd5
Goodbye, old TPS ( #1266 )
...
* clear out tps
* boost control
* aux valves
* launch, aux valves
* unused field
2020-04-05 19:33:33 -04:00
7d5df29fbd
yet more tps consumers ( #1258 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
* engine load
* ve lookup
* unused
* oops we needed that
* oops needed that too
* mocking
* test mocks
* oops
* helps to use the right sensor
* and cylinder cleanup
* fuel math
* typo
* old tests
* kill dead stuff
* cleanup
* more
* fix
* test
* s
* fix signature
* fix test
* comment
* priming pulse
* remove mock tps
* remove more dead
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-05 09:11:25 -04:00
b015ec5944
Add redundant sensor ( #1249 )
...
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* casing
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-02 08:55:21 -04:00
22267e5479
Replace hasPedalPositionSensor ( #1245 )
...
* remove
* add Sensor::hasSensor
* consume in etb
* remove unused state
* don't use it there either
* format
* fix up tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-02 08:04:12 -04:00
8151793ec7
Improve tps error message ( #1244 )
...
* improve error messages
* fix
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-02 08:02:44 -04:00
50cd6549a2
Fully switch acc pedal to new sensors ( #1212 )
...
* proxy sensor
* header
* idle
* can
* settings
* remove old mocking
* remove old impl
* etb
* oops, gotta actually register it
* fix test
* structured bindings ftw!
* driver intent for stepper
* tear out old
* oops too much
2020-04-01 20:21:03 -04:00
15c40ffb5b
Sensor-via-CAN ( #1241 )
...
* CAN sensor impl
* subscription hookup
* printing
* init
* inject stamp
* don't init const field
* clarify
* guard for non-CAN builds
* fix merge
* guard with EFI_CANBUS_SLAVE
* headers, guards
* include
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-31 23:21:05 -04:00
81211219f2
CAN progress
2020-03-31 16:49:19 -04:00
f41f0454bd
Debugging for sensor converter functions ( #1239 )
...
* func print
* resistance func, func chain
* formatting
* resistance func format
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-31 01:07:08 -04:00
483d4a2204
Debuggability in the new sensor world ( #1238 )
...
* rename to avoid conflict
* fix efilib
* add sensor printing
* makefile
* that check was already there
* const
* const
* fix tests
* formatting
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-30 18:29:42 -04:00
8fd9842310
cleanup extern mess ( #1237 )
...
* cleanup
* move outside define
2020-03-29 19:06:03 -04:00
ff6fd10537
dual ETB progress
2020-03-24 20:22:01 -04:00
4740f525ee
save some ram ( #1211 )
...
* remove dead stuff
* why store those pointers twice?
2020-03-22 19:06:29 -04:00
f587b9f555
Proxy sensor for extra magic ( #1210 )
...
* proxy sensor
* header
2020-03-22 17:29:01 -04:00
701f7fd7aa
Accelerator pedal with new sensors ( #1208 )
...
* add pedal sensor
* update status loop
* add bit to ts
* fix math
* divide at config time
* this used a little bit of ram
2020-03-22 17:09:46 -04:00
985269808e
Pedal rx shim ( #1207 )
...
* rx pedal over can
* guard
* guard
* don't cast away qualifiers
2020-03-21 22:35:27 -04:00
e76f567608
Grow CAN TX stack ( #1201 )
...
* grow
* check mock first
2020-03-19 19:29:56 -04:00
7b44f618e7
custom verbose can format ( #1200 )
...
* config
* ts
* default cfg
* hand generate
* tx struct helper
* add data sending
* wire up
* value_or helper
* add file
* more sensors
* header
* compactify
* add status frame
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-19 17:58:46 -04:00
9f26e6d894
fix icu trigger polarity ( #1177 )
...
* fix polarity
* fix confusing names
2020-03-08 08:57:21 -04:00
397907a06f
Support disabling most/all features ( #1162 )
...
* this flag did nothing
* guard features properly
2020-02-26 18:16:35 -05:00
4d1d2672ce
tps header cleanup ( #1130 )
...
* tps header cleanup
* dead code
2020-02-07 23:20:14 -03:00
f7282966d2
Consume new tps in status_loop.cpp, settings.cpp ( #1129 )
...
* new tps
* more
* settings.cpp too
* more
* comment
2020-02-07 06:05:15 -03:00
6ebc49ce8b
Use new sensors for TPS ( #1111 )
...
* tps init
* fix init
* call init
* use correct sensors, scale using constant
* includes
* handle error
2020-02-04 01:54:05 -05:00
c7dce2e38b
Rescale TPS ( #1112 )
...
* fake adc ticks
* consumers
* fix test 1
* fix tests
2020-02-01 16:41:07 -05:00
0c3f73c2b4
code style
2020-01-21 01:47:58 -05:00
83b1ca00a4
code style
2020-01-21 01:40:11 -05:00
bb217b01dd
happy new year unification
2020-01-13 21:57:43 -05:00
ecd240d6f2
AEM X-Series CAN Wideband Support ( #1096 )
...
* aem xseries
* parens to avoid operator precedence issues
* put in cfg
* disable that too
* fix sim/unit
* enough generated for ci
* this will guard correctly
2020-01-12 03:44:37 -05:00
e4c4e90981
how tf did this ever build...? ( #1099 )
2020-01-12 03:25:34 -05:00
d3d088676b
Add timeout + raw value access for sensors ( #1098 )
...
* timeout
* inject stamp
* allow getting raw value
* plumb timeout
* fix tests
2020-01-12 03:25:23 -05:00
19df4661ab
better method name
2020-01-10 02:02:22 -05:00
b83a5310be
happy new year
2020-01-08 00:02:40 -05:00
b9454790c7
Add new sensor function types ( #1065 )
...
* add functions
* add tests
* add chain tests
* float suffix
2019-12-17 09:06:29 -05:00
eb27bcf3d6
Terrible ADC3 hack for Proteus vbatt support ( #1066 )
...
* this is a great idea!
* typo
* simplify
* simplify, cache coherency
* enable adc3 in board file
* copyright
* fix tests, probably
2019-12-17 08:34:56 -05:00
08a8fa8d1e
Remove sensor reporting loc ( #1064 )
...
* remove raw rept loc
* remove normal reporting location
* fix up oil pressure
* format
2019-12-16 22:45:46 -05:00
521b27ff35
codes clean-up
2019-12-14 00:14:36 -05:00
e9e7a66cf8
etbActualCount logic to handle the scenario where only one ETB is present
2019-12-13 12:50:34 -05:00
af4f20551b
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
1cc71ef8ec
dual-ETB progress
2019-12-10 00:07:46 -05:00
b04166d173
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
73e3edc3d8
dual ETB seems to work!
2019-11-29 20:15:29 -05:00
e2074388ff
dual ETB seems to work!
2019-11-29 19:06:50 -05:00
9ee8616cb0
Use templated array references ( #1027 )
...
* update defs
* consumers, use default params
* setArrayValues in tests
* floats
* test fixing
2019-11-22 23:27:24 -05:00
3c57c3d216
refactoring: time to unify digital pin API
2019-11-11 23:32:09 -05:00
f082ac48b1
refactoring: time to unify digital pin API
2019-11-11 23:04:27 -05:00
b9f0f2c592
need better higher-level API :(
2019-11-11 22:14:45 -05:00
bab1744d1d
progress towards #961
2019-11-04 22:44:52 -05:00
Matthew Kennedy
rusefi
rusEfi