* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* new function
* hellen
* MRE
* proteus
* put those function declarations in a reasonable place
* put the comment back
* weak
* move that to a reasonable place
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* rusefi_halconf
* h7 gpt
* don't redefine that
* maybe this was necessary
* format
* no usb in cypress
* flags for bl
* cypress
* maybe bootloader
* no smart build for cypress/kinetis
* no smart build
* no really, disable smart build
* don't need to clean that env var
* cypress
* format
* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* Proper way to add lis302 driver
* Proper way to add license directory to includes
* Makefile: simplify
All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on.
* board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC
* Cypress: fix CANv2 includence into build
* smart gpio: fix tle8888 direct pin mapping for MRE
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888
* TLE8888: cleanup
* TLE8888: do not reset driver private data on WD/undervoltage reset
* TLE8888: diagnostic updates
* TLE8888 driver: BIG driver rework
* TLE8888: check SPI answers for abnormal states
Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed
Keep tracking last accessed register and check with the next reply.
* TLE8888: debug clean-up
* TLE8888: implement spi array write
This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS
* TLE8888: fix PP outputs in OD mode
* TLE8888: cleanup register definitions
* TLE8888: run separate driver thread for each chip instance
Calculating poll interval for few chips become more complex, avoid
this running thread for each device.
* TLE8888: fix cypress and kinetic compilation
Both platforms define its own MAX and cause redifination error if
common.h is included in driver.
* MRE: update mapping.yaml and fix direct pin mapping for TLE8888
* TLE8888: diagnnostic: disable switch off in case of overcurrent
For all output, use current limiting instead
* TLE8888: check for overvoltage on OUT8..OUT13
* TLE8888: add TODO note about how to recover from failure condition
Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.
* TLE8888: save few bytes of RAM
* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888
Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c
* TLE8888: reorder code, cleanup
* TLE8888: mode all debug/statisctic to per-chip struct
* TLE8888: rework poll interval calculation
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
* Add SW knock control to MRE on AT4
* Update software_knock.cpp
cleanup
* use knock only for final build
* adjust RAM
* Update engine_controller.cpp
Adjust RAM for HW QC special to build
* add env var to skip upload
* remove checking from compile.bat
* working on push.yaml
* finish sorting
* progress
* rename push to builds
* rename push to builds
* Add skip upload env var
* fix pull_request name
* fixed typo and changed name
* fixed indentation and runs-on
* try different env var setup
* add nucleos and switch to underscore
* add quotes
* remove boards that were commented
* remove boards that were commented
* fix project board name
* fixed variable name
* add ini-file and console-settings
* try installing gcc-multilib first
* Install g++-multilib as well
* remove unnecessary export
* fixed exit numbers
* change to different env setup
* add simulator and console compilation to board bundles
* changed OS and added linux simulator build
* add checkout and missing colon
* add gcc-multilib installes
* Install mingw
* fixed install
* remove mingw from linux sim and call compile directly
* change directory
* moved envs to command
* debug ls
* debug ls
* set ftp vars
* add makefile debug info
* removed batchecks
* redirect stdout to easier see orrs
* change name
* remove redirect, add file inpection
* Add conditional project name
* Try software upgrade
* missing char
* update ine files
* try quotes
* add escapes
* add quotes
* add escapes and quotes
* remove quotes and escapes
* remove software upgrade
* ignore test 2
* update apt
* like this then
* forgot import
* fix case
* remove RUSEFI_SKIP_UPLOAD and check RUSEFI_FTP_SERVER instead
* break workflow back apart
* upload simulator artifact
* fixed operator
* update apt
* change paths
* Update build-firmware.yaml
* move update bundle to artifacts
* fix var name
* Install ncftp
* set env vars conditionally
* remove check so zips are created
* try things the github way and copy to primary
* re-enable test
* missing space
rusefillc
Matthew Kennedy
David Holdeman
Andrey G
rusefi
shadowm60
kon
andreika-git