* WS2812 LED strip on TIM1_CH1_UP using pin PE9 and DMA.
* Applied suggestions
* linux and Windows have different approach
* linux and Windows have different approach
---------
Co-authored-by: benas-gavea <bbrazdziunas@gavea.co.uk>
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
* unit_tests: sent: zero-init
* sent: SENT_SLOW_CHANNELS_MAX to header
* unit_tests: sent: clock, falling edges
* SENT: support and autodetect if device sends pause pulse
Also rework tick time calculation
* unit_tests: SENT: verbose debug on request
* unit_tests: SENT: actual checks
* unit_tests: SENT: extract common code for reuse
* unit_test: SENT: add test with fuel pressue captured data
* unit_test: SENT: add test with Ford ETB CLOSED captured data
* smt32_common.mk: reduce copy-paste
* SENT: sentPins is not used
* hw: stm32: add ICU helper
* hw: stm32: icu helpers: also return timer base clock
* SENT: icu: use helper to get ICU & channel and AF
* SENT: icu: use CPU ticks for pulse measurements
* hw: stm32: icu: cleanup
* use tabs
* SENT: Lua glue: getSentValue returns ETB position now
Can be tested with following LUA script:
setTickRate(100)
function onTick()
pos = getSentValue(1)
setLuaGauge(1, 10000 * pos)
print(pos)
end
* SENT: measure more pulses during Unit time calibration
* SENT: no magic numbers
* SENT: fix typo
* SENT: setninfo output: do not show slow channels if not detected
* SENT: fix GM-style CRC calculation
* SENT: another one CRC algorithm, now for pressure sensor
* SENT: show CRC error percentage
* SENT: cache current setting to do proper clean-up on stop
* SENT: microRusEfi supports send on "AN temp 2" = PA1 only
* SENT: microRusEfi: fix pin number
* SENT: use activeConfiguration during sentStop()
* MRE: pin 23: can accept events (for SENT)
* 429 boots and LEDs work
* oops missed a comma
* enable on f767 too, since it should be the same board
* why not just completely duplicate it
* script should not be fancy
* script should not be fancy
* correct pins
* h743 while we're at it
rusefi
Matthew Kennedy
rusefillc
rusefillc
Andrey G