* extract isSyncPoint
* test because why not
* check vvt resync nb2
* custom nb decoder
* test only resyncs once!
* good job valgrind, you found a bug!
* s
* poke
* poke again for science
* kick for science
* kick
* kick
* comment kick
* s
* don't try to compare the array decay pointer to 0 (!)
* collateral damage
* adjust miata sync
* reset trigger states correctly on engine stop
* s
* nissan MR too
* ignition controller detects rising edge on voltage
* update test
* comment
* ignore negative transients
* tweak
* test
* priming happens on ignition-on
* priming has its own scheduling
* config & UI
* dead config
* implementation
* look, the test caught a bug
* keep the watchdog happy
* bad merge
* changelog
* easier to read the test
* test naming
* fuel pump
* s
* call correct callback
* more dead
* test adjustment
* don't overflow
* don't need separate function
* java
* give it a name
* generated
* generated
* add to generate script
* import *
* this is so cheap we don't need a flag
* main relay
* plumbing
* dead fsio stuff
* test it
* by 100%, we mean 99.98%
* data
* stub test
* use getTimeSinceSyncPoint
* s
* s
* no
* test
* stray ;
* those were 1/10 what they were supposed to be
* actually check something
* dead log line?
Fix some uses of ENGINE() not detected by regex due to parenthesis.
Remove now empty engine_ptr.h
Don't worry about EFI_* not being defined, the compiler defaults to 0 if they aren't.
* Create a base class EngineModule for that contains various useful callbacks.
This cleans up the API by not requiring the notifiers to know about who wants callbacks. The only
place you need to update to add a module is in one place.
* Add mockability.
* Convert InjectorModel to a Mockable EngineModule
* Programmatically remove EnginePtr/inject, EXPAND_Engine, and WITH_ENGINE_TEST_HELPER*
for i in ": public EnginePtr " ", public EnginePtr" "EXPAND_Engine;" "EXPAND_Engine"; do
git grep -l "$i" | xargs sed -i "s/$i//g"
done
git grep -l "inject" | xargs sed -i "/inject[(][)]/d"
for i in WITH_ENGINE_TEST_HELPER_SENS WITH_ENGINE_TEST_HELPER_BOARD_CALLBACK WITH_ENGINE_TEST_HELPER; do
git grep -l "$i" | xargs sed -i "s/$i/EngineTestHelper eth/g"
done
git checkout firmware/controllers/core/engine_ptr.h
git checkout unit_tests/global.h
* Review fixups.
* more unification
* hip stub
* comment
* guard
* channel idx
* include
* hip
* move in to engine
* hip9011
* dead stuff
* dead
* fsio
* lcd
* more dead
* ignore
* set up precompiled header
* makefile
* fixes
* cleanup
* only depend cpp on pch
* efifeatures in pch
* f7 efifeatures
* consolidate
* simulator
* proteus build
* error handling is a good one
* bootloader pch
* don't auto include pch
* dirs
* delete on clean
* bootloader cleans
* clean.sh deletes pch
* disable in bl for now
* there was a typo so maybe it'll work now
* remove todo
* don't need that any more
* don't need these parts
* don't need this part
* undo changes
* use a different cpp as example
* s
* Revert "cleanup"
This reverts commit 8de8698490f5d09c2df753f00a89751aa898be9a.
* also unnecessary now
* buh
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* new impl
* remove fsio
* inject "is ac active" to fan
* include the correct code
* include
* test
* more AC features
* AC switch vs. actual AC indicators
* include
* duh
* remove simple cases
* more simple
* serial
* s
* more
* try memory
* easy
* mmc acc
* that's how much memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hook up lps25
* it would help to include all the files
* unguard some stuff
* unguard more
* guarding
* s
* guard
* only register if init worked
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* vbatt in sensor model
* sensor name
* vbatt
* s
* oy vei
* a little bit of cleanup
* memory apparently
* cj125 test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
* Guard define argument
* ADC: isAdcChannelValid
Check for both <= EFI_ADC_NONE and >= EFI_ADC_LAST_CHANNEL
Also check for value out of enum range (corrupted settings)
* Fix unit tests
* move rev limit to limp manager
* call fatal error
* include order
* fix bug
* tests
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* switch to CriticalSectionLocker
* that's just about all
* clean up last usage
* include hpp for sim
* need the cpp wrappers in the makefile too
* include dir
* include
* smart gpio: fix tle8888 direct pin mapping for MRE
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888
* TLE8888: cleanup
* TLE8888: do not reset driver private data on WD/undervoltage reset
* TLE8888: diagnostic updates
* TLE8888 driver: BIG driver rework
* TLE8888: check SPI answers for abnormal states
Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed
Keep tracking last accessed register and check with the next reply.
* TLE8888: debug clean-up
* TLE8888: implement spi array write
This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS
* TLE8888: fix PP outputs in OD mode
* TLE8888: cleanup register definitions
* TLE8888: run separate driver thread for each chip instance
Calculating poll interval for few chips become more complex, avoid
this running thread for each device.
* TLE8888: fix cypress and kinetic compilation
Both platforms define its own MAX and cause redifination error if
common.h is included in driver.
* MRE: update mapping.yaml and fix direct pin mapping for TLE8888
* TLE8888: diagnnostic: disable switch off in case of overcurrent
For all output, use current limiting instead
* TLE8888: check for overvoltage on OUT8..OUT13
* TLE8888: add TODO note about how to recover from failure condition
Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.
* TLE8888: save few bytes of RAM
* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888
Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c
* TLE8888: reorder code, cleanup
* TLE8888: mode all debug/statisctic to per-chip struct
* TLE8888: rework poll interval calculation
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
* engine load
* ve lookup
* unused
* oops we needed that
* oops needed that too
* mocking
* test mocks
* oops
* helps to use the right sensor
* and cylinder cleanup
* fuel math
* typo
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
rusefillc
Matthew Kennedy
Andrey
Andrei
Scott Smith
rusefi
Andrey G
shadowm60