//DO NOT EDIT MANUALLY, let automation work hard.

// auto-generated by PinoutLogic.java based on config/boards/m74_9/connectors/m74_9.yaml
#pragma once

Gpio GENERATED_OUTPUTS = {
	Gpio::L9779_OUT_4, // Injector 1
	Gpio::L9779_OUT_3, // Injector 2
	Gpio::L9779_OUT_2, // Injector 3
	Gpio::L9779_OUT_1, // Injector 4
	Gpio::L9779_OUT_6, // Oxygen sensor 1 heater
	Gpio::L9779_OUT_5, // EVAP solenoid control
	Gpio::L9779_OUT_7, // Oxygen sensor 2 heater
	Gpio::L9779_IGN_1, // Coil 1 (< +2.5v) / Coils 1,4
	Gpio::L9779_IGN_3, // Coil 3  (< +2.5v) / Coils 2,4
	Gpio::L9779_IGN_2, // Coil 2  (< +2.5v) (not populated)
	Gpio::L9779_IGN_4, // Coil 4  (< +2.5v) (not populated)
	Gpio::L9779_OUT_17, // Air compressor control
	Gpio::L9779_OUT_14, // Secondary starter relay
	Gpio::L9779_OUT_15, // FAN 1 relay
	Gpio::L9779_OUT_16, // FAN 2 relay
	Gpio::L9779_OUT_18, // Unknown out (OUT18)
	Gpio::L9779_OUT_13, // Fuel pump relay
// "Injector 1",
// "Injector 2",
// "Injector 3",
// "Injector 4",
// "Oxygen sensor 1 heater",
// "EVAP solenoid control",
// "Oxygen sensor 2 heater",
// "Coil 1 (< +2.5v) / Coils 1,4",
// "Coil 3  (< +2.5v) / Coils 2,4",
// "Coil 2  (< +2.5v) (not populated)",
// "Coil 4  (< +2.5v) (not populated)",
// "Air compressor control",
// "Secondary starter relay",
// "FAN 1 relay",
// "FAN 2 relay",
// "Unknown out (OUT18)",
// "Fuel pump relay",
}