# List of all the board related files.
BOARDCPPSRC =  $(BOARD_DIR)/board_configuration.cpp

ifeq ($(PROJECT_CPU),ARCH_STM32F4)
  IS_STM32F429 = yes
endif

# see also openblt/board.mk STATUS_LED
DDEFS += -DLED_CRITICAL_ERROR_BRAIN_PIN=Gpio::E3
DDEFS += -DFIRMWARE_ID=\"proteus\"
DDEFS += $(VAR_DEF_ENGINE_TYPE)

DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE

# Turn off stuff proteus doesn't have/need
DDEFS += -DEFI_MAX_31855=FALSE -DBOARD_L9779_COUNT=0 -DBOARD_TLE8888_COUNT=0

# Any Proteus-based adapter boards with discrete-VR decoder are controlled via a 5v ignition output
DDEFS += -DVR_SUPPLY_VOLTAGE=5

# This stuff doesn't work on H7 yet
ifneq ($(PROJECT_CPU),ARCH_STM32H7)
	DDEFS += -DSTM32_ADC_USE_ADC3=TRUE
	DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE
endif

# serial ports only on F4
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
	# Hardware serial port on UART 2 -> PD5/PD6
	DDEFS += -DSTM32_UART_USE_USART2=TRUE
	DDEFS += -DTS_PRIMARY_UxART_PORT=UARTD2
	DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=Gpio::D5 -DEFI_CONSOLE_RX_BRAIN_PIN=Gpio::D6
endif

# We are running on Proteus hardware!
DDEFS += -DHW_PROTEUS=1

ifeq ($(PROJECT_CPU),ARCH_STM32F7)
	DDEFS += -DSHORT_BOARD_NAME=proteus_f7 -DSTATIC_BOARD_ID=STATIC_BOARD_ID_PROTEUS_F7
	ifeq ($(DEBUG_LEVEL_OPT),)
		DEBUG_LEVEL_OPT = -Os -ggdb -g
	endif
else ifeq ($(PROJECT_CPU),ARCH_STM32F4)
	DDEFS += -DSHORT_BOARD_NAME=proteus_f4 -DSTATIC_BOARD_ID=STATIC_BOARD_ID_PROTEUS_F4
else ifeq ($(PROJECT_CPU),ARCH_STM32H7)
	DDEFS += -DSHORT_BOARD_NAME=proteus_h7 -DSTATIC_BOARD_ID=STATIC_BOARD_ID_PROTEUS_H7
else
$(error Unsupported PROJECT_CPU [$(PROJECT_CPU)])
endif