struct_no_prefix engine_state_s

struct LuaAdjustments
	float fuelAdd;Lua: Fuel add;"g", 1, 0, 0, 1, 3
	float fuelMult;Lua: Fuel mult;

	bit clutchUpState
	bit brakePedalState
    bit acRequestState
    bit luaDisableEtb
    bit luaIgnCut

end_struct

LuaAdjustments lua

struct speed_density_s
	int16_t autoscale tCharge;Air: Charge temperature estimate;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
	float tChargeK;Air: Charge temperature estimate K
end_struct

speed_density_s sd;

float baroCorrection;@@GAUGE_NAME_FUEL_BARO_CORR@@

struct cranking_fuel_s

floatms_t baseFuel;Fuel: base duration\nDuration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.\nDeprecated. Please use '1'.\nTODO: maybe account for injector flow?
float coolantTemperatureCoefficient;Cranking: CLT coefficient
float tpsCoefficient
float durationCoefficient
floatms_t fuel;Fuel: Actual injection\nduration based on all coefficients.

! end of cranking_s structure definition
end_struct

! actually define a member of 'cranking_s' type
cranking_fuel_s crankingFuel


	custom percent_t 4 scalar, F32, @OFFSET@, "", 1, 0, 0, 100, 2

    int16_t hellenBoardId;Detected Board ID;"id", 1, 0, 0, 3000, 0

    bit clutchUpState;@@INDICATOR_NAME_CLUTCH_UP@@
    bit clutchDownState;@@INDICATOR_NAME_CLUTCH_DOWN@@
    bit brakePedalState;@@INDICATOR_NAME_BRAKE_DOWN@@
    bit startStopState
    uint32_t startStopStateToggleCounter

    float egtValue1
    float egtValue2

    int16_t desiredRpmLimit;User-defined RPM hard limit;"rpm", 1, 0, 0, 30000, 0

uint32_t fuelInjectionCounter
uint32_t sparkCounter


	! Values used for load axes for fuel/ign tables
	! These may or may not be the same value, depending on mode
	float fuelingLoad;@@GAUGE_NAME_FUEL_LOAD@@
	float ignitionLoad;@@GAUGE_NAME_IGNITION_LOAD@@

	uint16_t autoscale veTableYAxis;;"%",{1/100}, 0, 0, 0, 0

! engine_state_s
end_struct