//
// Created by kifir on 8/23/24.
//

#pragma once

#include "batt_lag_corr_curve.h"

namespace engine_configuration_defaults {
    /* A/C Settings: */
    constexpr float AC_DELAY = 0.5f;
    constexpr uint16_t MIN_AC_PRESSURE = 100;
    constexpr uint16_t MAX_AC_PRESSURE = 300;
    constexpr float AC_PRESSURE_ENABLE_HYST = 10.0f;

    /* Shift Torque Reduction (Flat Shift): */
    constexpr bool ENABLE_SHIFT_TORQUE_REDUCTION = false;
    constexpr torqueReductionActivationMode_e TORQUE_REDUCTION_ACTIVATION_MODE = TORQUE_REDUCTION_BUTTON;
    constexpr switch_input_pin_e TORQUE_REDUCTION_TRIGGER_PIN = Gpio::Unassigned;
    constexpr bool TORQUE_REDUCTION_TRIGGER_PIN_INVERTED = false;
    constexpr float TORQUE_REDUCTION_TIME = 0.0f;
    constexpr bool LIMIT_TORQUE_REDUCTION_TIME = false;
    constexpr float TORQUE_REDUCTION_ARMING_RPM = 0.0f;
    constexpr float TORQUE_REDUCTION_ARMING_APP = 0.0f;
    constexpr int8_t TORQUE_REDUCTION_IGNITION_CUT = 0;
    constexpr float TORQUE_REDUCTION_IGNITION_RETARD = 0.0f;

    /* Other Sensor Inputs: */
    constexpr switch_input_pin_e CLUTCH_DOWN_PIN = Gpio::Unassigned;
    constexpr pin_input_mode_e CLUTCH_DOWN_PIN_MODE = PI_PULLUP;
    constexpr switch_input_pin_e CLUTCH_UP_PIN = Gpio::Unassigned;
    constexpr bool CLUTCH_UP_PIN_INVERTED = false;

    /* Launch Control: */
    constexpr switch_input_pin_e LAUNCH_ACTIVATE_PIN = Gpio::Unassigned;
    constexpr bool LAUNCH_ACTIVATE_PIN_INVERTED = false;
    constexpr launchActivationMode_e LAUNCH_ACTIVATION_MODE = SWITCH_INPUT_LAUNCH;
    constexpr int LAUNCH_SPEED_THRESHOLD = 0;

    constexpr fuel_pressure_sensor_mode_e FUEL_PRESSURE_SENSOR_MODE = FPM_Absolute;

    /* Injector */
    constexpr bool INJECTOR_FLOW_AS_MASS_FLOW = false;
    constexpr float INJECTOR_FLOW = 200.0f;
    constexpr BattLagCorrCurve INJECTOR_BATT_LAG_CURR { 3.371f, 1.974f, 1.383f, 1.194f, 1.04f, 0.914f, 0.797f, 0.726 };
    constexpr float FUEL_REFERENCE_PRESSURE = 300.0f;
    constexpr injector_compensation_mode_e INJECTOR_COMPENSATION_MODE = ICM_None;

    /* Secondary injector: */
    constexpr float INJECTOR_SECONDARY_FLOW = INJECTOR_FLOW;
    constexpr BattLagCorrCurve INJECTOR_SECONDARY_BATT_LAG_CURR = INJECTOR_BATT_LAG_CURR;
    constexpr float SECONDARY_INJECTOR_FUEL_REFERENCE_PRESSURE = 0.0f;
    constexpr injector_compensation_mode_e SECONDARY_INJECTOR_COMPENSATION_MODE = INJECTOR_COMPENSATION_MODE;

    /* Staged injection: */
    constexpr bool ENABLE_STAGED_INJECTION = false;

    /* Nitrous control */
    constexpr bool NITROUS_CONTROL_ENABLED = false;
    constexpr nitrous_arming_method_e NITROUS_CONTROL_ARMING_METHOD = DIGITAL_SWITCH_INPUT;
    constexpr switch_input_pin_e NITROUS_CONTROL_TRIGGER_PIN = Gpio::Unassigned;
    constexpr bool NITROUS_CONTROL_TRIGGER_PIN_INVERTED = false;
    constexpr pin_input_mode_e NITROUS_CONTROL_TRIGGER_PIN_MODE = PI_DEFAULT;
    constexpr lua_gauge_e NITROUS_LUA_GAUGE = LUA_GAUGE_1;
    constexpr lua_gauge_meaning_e NITROUS_LUA_GAUGE_MEANING = LUA_GAUGE_LOWER_BOUND;
    constexpr float NITROUS_LUA_GAUGE_ARMING_VALUE = 0.0f;

    constexpr uint16_t NITROUS_MINIMUM_VEHICLE_SPEED = 0;
    constexpr int NITROUS_MINIMUM_TPS = 80;
    constexpr uint8_t NITROUS_MINIMUM_CLT = 60;
    constexpr uint16_t NITROUS_MAXIMUM_MAP = 0;
    constexpr float NITROUS_MAXIMUM_AFR = 14.0f;
    constexpr uint16_t NITROUS_ACTIVATION_RPM = 4000;
    constexpr uint16_t NITROUS_DEACTIVATION_RPM = 7000;
    constexpr uint16_t NITROUS_DEACTIVATION_RPM_WINDOW = 500;
    constexpr int8_t NITROUS_FUEL_ADDER_PERCENT = 0;
    constexpr float NITROUS_IGNITION_RETARD = 0.0f;

    constexpr float FUEL_LEVEL_AVERAGING_ALPHA = 0.001f;
    constexpr float FUEL_LEVEL_UPDATE_PERIOD_SEC = 0.1f;
    constexpr float FUEL_LEVEL_LOW_THRESHOLD_VOLTAGE = 0.25f;
    constexpr float FUEL_LEVEL_HIGH_THRESHOLD_VOLTAGE = 4.5f;
}