History

Andrey Gusakov cdd5161d52 usb: wait 15 sec for usb to spin up Wait 15 seconds for USB to become CONFIGURED. Previous timeout was 5 sec. Windows does usb enumeration quite slow lets give some more room		2023-05-09 07:08:11 -04:00
..
adc	it's going to be painful	2023-04-29 00:44:00 -04:00
algo	…
digital_input	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
drivers	it's going to be painful	2023-04-29 00:44:00 -04:00
mass_storage	…
microsecond_timer	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
openblt	deduplicate $(BOARD_DIR) in makefiles (#5024 )	2023-02-01 14:41:27 -05:00
ports	it's going to be painful	2023-04-29 00:44:00 -04:00
sensors	it's going to be painful	2023-04-29 00:44:00 -04:00
backup_ram.h	…
cdm_ion_sense.cpp	…
cdm_ion_sense.h	…
debounce.cpp	…
debounce.h	…
flash_int.h	…
hardware.cpp	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
hardware.h	cj125	2023-04-29 00:15:54 -04:00
hw_layer.mk	progress: run more code in simulator	2023-03-05 02:36:43 -05:00
io_pins.cpp	…
io_pins.h	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
kline.cpp	only:hellen-honda-k	2023-05-01 16:56:30 -04:00
kline.h	kline: hide under ifdef EFI_KLINE, signed vs unsigned	2023-04-07 04:08:07 -04:00
mc33816.cpp	…
mc33816.h	…
mmc_card.cpp	usb: wait 15 sec for usb to spin up	2023-05-09 07:08:11 -04:00
mmc_card.h	…
pin_repository.cpp	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
pin_repository.h	…
readme.md	…
rtc_helper.cpp	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
rtc_helper.h	…
smart_gpio.cpp	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00
smart_gpio.h	CAN GPIO #4096	2023-03-04 20:50:22 -05:00
stepper.cpp	…
stepper.h	…
stepper_dual_hbridge.cpp	change ObdCode to enum class builds firmware	2023-04-29 00:44:00 -04:00

readme.md

Hardware Layer

https://github.com/rusefi/rusefi/wiki/ASIC