rusefi

History

Andrey G fa840a7593 hip9011 and friends (#2527 ) * engine math: extrant getFiringOrderTable for reuse * engine math: getNextFiringCylinderId helper * introduce knock_logic: first member is getCylinderKnockBank() moved from software_knock.cpp * hip9011: support two inputs/banks * fix CI * Board Subaru EG33: populated with TPIC8101 with Advanced mode * hip9011: test communication in advanced mode * hip9011: handle situation when chip is already in advanced mode * Board Subaru EG33: cylinder to knock bank mapping * hip9011: count spi transactions in advansed mode too * hip9011: reset incalid responce counter after chip initialization * hip9011: make debug output more structured		2021-04-04 18:13:21 -04:00
..
adc	dead code, warnings (#2461 )	2021-03-15 10:23:19 -04:00
algo	ADC cleanup, enable oversampling on H7 (#2437 )	2021-03-08 14:50:50 -05:00
digital_input	not great solution to code duplication, also helping QC build	2021-02-13 11:19:39 -05:00
drivers	enable CAN on H7 (#2393 )	2021-03-09 18:54:01 -05:00
lcd	replace print/printMsg with scheduleMsg (#2497 )	2021-03-26 17:23:26 -04:00
mass_storage	dead code, warnings (#2461 )	2021-03-15 10:23:19 -04:00
mc33816	…
microsecond_timer	speed up boot by 48 ms (#2506 )	2021-03-29 22:59:38 -04:00
ports	h7 dfu and comments (#2522 )	2021-04-03 21:58:29 -04:00
sensors	hip9011 and friends (#2527 )	2021-04-04 18:13:21 -04:00
backup_ram.h	…
cdm_ion_sense.cpp	…
cdm_ion_sense.h	…
debounce.cpp	…
debounce.h	…
flash_int.h	H7 flash (#2408 )	2021-02-26 17:38:17 -05:00
hardware.cpp	replace print/printMsg with scheduleMsg (#2497 )	2021-03-26 17:23:26 -04:00
hardware.h	move some initialization steps earlier (#2480 )	2021-03-25 16:22:03 -04:00
hip9011.md	…
hw_layer.mk	implement ads1015 driver (#2458 )	2021-03-14 19:02:42 -04:00
i2c_bb.cpp	implement ads1015 driver (#2458 )	2021-03-14 19:02:42 -04:00
i2c_bb.h	implement ads1015 driver (#2458 )	2021-03-14 19:02:42 -04:00
io_pins.cpp	…
io_pins.h	…
max31855.cpp	…
max31855.h	…
mc33816.cpp	vBatt -> SensorType::vBatt #2260	2021-03-11 22:52:34 -05:00
mc33816.h	…
mc33816_data.c	…
mc33816_data.h	…
mc33816_memory_map.h	…
mmc_card.cpp	explicit status for MSD SD mode	2021-04-03 19:42:54 -04:00
mmc_card.h	move some initialization steps earlier (#2480 )	2021-03-25 16:22:03 -04:00
mmc_card_access.cpp	fixes for f7, sdio/sdmmc (#2400 )	2021-02-25 13:37:41 -05:00
neo6m.cpp	replace print/printMsg with scheduleMsg (#2497 )	2021-03-26 17:23:26 -04:00
neo6m.h	…
pin_repository.cpp	harden against various no-boot scenarios (#2468 )	2021-03-17 09:24:13 -04:00
pin_repository.h	…
readme.md	Create readme.md	2021-02-09 13:43:26 -05:00
rtc_helper.cpp	replace print/printMsg with scheduleMsg (#2497 )	2021-03-26 17:23:26 -04:00
rtc_helper.h	…
servo.cpp	set all thread priorities in the same place (#2412 )	2021-02-28 07:30:45 -05:00
servo.h	…
smart_gpio.cpp	…
smart_gpio.h	…
stepper.cpp	set all thread priorities in the same place (#2412 )	2021-02-28 07:30:45 -05:00
stepper.h	…
stepper_dual_hbridge.cpp	…
trigger_input_adc.cpp	…
vehicle_speed.cpp	…
vehicle_speed.h	…

readme.md

https://github.com/rusefi/rusefi/wiki/ASIC