79 lines
2.2 KiB
C++
79 lines
2.2 KiB
C++
/**
|
|
* @file dc_motor.h
|
|
*
|
|
* @date Dec 22, 2018
|
|
* @author Matthew Kennedy, (c) 2018
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "pwm_generator_logic.h"
|
|
|
|
/**
|
|
* @brief Brushed or brushless DC motor interface
|
|
*
|
|
* Represents a DC motor (brushed or brushless) that provides simple
|
|
* torque/power/current/duty cycle control, but not accurate absolute position control.
|
|
*/
|
|
class DcMotor
|
|
{
|
|
public:
|
|
/**
|
|
* @brief Sets the motor duty cycle.
|
|
* @param duty +1.0f represents full power forward, and -1.0f represents full power backward.
|
|
* @return True if any fault was detected driving the motor, and false if successful.
|
|
*/
|
|
virtual bool Set(float duty) = 0;
|
|
};
|
|
|
|
/**
|
|
* @brief Represents a DC motor controller (H bridge) with one pin for enable (PWM),
|
|
* and two pins for direction control.
|
|
*
|
|
* The enable pin is used for PWM and disable, and the two direction pins are used
|
|
* to set the polarity of each half of the H bridge. setting {dir1,dir2} = 10 should,
|
|
* turn the motor one direction (positive duty), and = 01 should turn the other way (negative
|
|
* duty).
|
|
*/
|
|
class TwoPinDcMotor : public DcMotor
|
|
{
|
|
public:
|
|
enum class ControlType
|
|
{
|
|
/**
|
|
* For example TLE7209 - two control wires:
|
|
* PWM on both wires - one to open, another to close
|
|
*/
|
|
PwmDirectionPins,
|
|
/**
|
|
* For example VNH2SP30 - three control wires:
|
|
* PWM on 'enable' PIN, two binary pins for direction
|
|
*
|
|
* TLE9201 with two wire control also uses this mode
|
|
* PWM on one pin, open/close using one binary direction pin, second direction pin unused
|
|
*/
|
|
PwmEnablePin,
|
|
};
|
|
|
|
private:
|
|
SimplePwm* const m_enable;
|
|
SimplePwm* const m_dir1;
|
|
SimplePwm* const m_dir2;
|
|
float m_value = 0;
|
|
|
|
ControlType m_type;
|
|
public:
|
|
/**
|
|
* @param enable SimplePwm driver for enable pin, for PWM speed control.
|
|
* @param dir1 Enable 1 or direction 1 pin. Gets set high to rotate forward.
|
|
* @param dir2 Enable 2 or direction 2 pin. Gets set high to rotate backward.
|
|
*/
|
|
TwoPinDcMotor(SimplePwm* enable, SimplePwm* dir1, SimplePwm* dir2);
|
|
|
|
virtual bool Set(float duty) override;
|
|
float Get() const;
|
|
bool isOpenDirection() const;
|
|
|
|
void SetType(ControlType type) { m_type = type; }
|
|
};
|