rusefi/firmware/hw_layer/ports/stm32/stm32f7/mpu_util.cpp

/**
 * @file	mpu_util.cpp
 *
 * @date Jul 27, 2014
 * @author Andrey Belomutskiy, (c) 2012-2020
 */

#include "pch.h"

#include "flash_int.h"

static bool isDualBank() {
	// cleared bit indicates dual bank
	return (FLASH->OPTCR & FLASH_OPTCR_nDBANK) == 0;
}

static uint16_t flashSize() {
	return *reinterpret_cast<const volatile uint16_t*>(FLASHSIZE_BASE);
}

enum class DeviceType {
	DualBank1MB,
	DualBank2MB,
	SingleBank1MB,
	SingleBank2MB,
	Unknown
};

static DeviceType determineDevice() {
	bool db = isDualBank();
	uint16_t fs = flashSize();

	if (db) {
		if (fs == 1024) {
			return DeviceType::DualBank1MB;
		} else if (fs == 2048) {
			return DeviceType::DualBank2MB;
		}
	} else {
		if (fs == 1024) {
			// Unsupported scenario! Not enough space for program plus two config copies
			criticalError("1MB single bank MCU detected: please clear nDBANK option bit and reinstall FW.");
			return DeviceType::SingleBank1MB;
		} else if (fs == 2048) {
			return DeviceType::SingleBank2MB;
		}
	}

	criticalError("Unrecognized flash memory layout db=%d, size=%d", db, fs);
	return DeviceType::Unknown;
}

bool allowFlashWhileRunning() {
	// Allow flash-while-running if dual bank mode is enabled, and we're a 2MB device (ie, no code located in second bank)
	return determineDevice() == DeviceType::DualBank2MB;
}

// See ST AN4826
size_t flashSectorSize(flashsector_t sector) {
	// 1MB devices have 8 sectors per bank
	// 2MB devices have 12 sectors per bank
	// However, the second bank always starts at index 12 (1MB devices have a 4 sector discontinuity between banks)

	if (sector >= 12) {
		// The second bank has the same structure as the first
		return flashSectorSize(sector - 12);
	}

	// On 1MB devices, sectors 8-11 don't exist, therefore have zero size.
	if (flashSize() == 1024) {
		if (sector > 7 && sector < 12) {
			return 0;
		}
	}

	// Pages are twice the size when in single bank mode
	size_t dbMul = isDualBank() ? 1 : 2;

	if (sector <= 3)
		return 16 * 1024 * dbMul;
	else if (sector == 4)
		return 64 * 1024 * dbMul;
	else if (sector >= 5)
		return 128 * 1024 * dbMul;
	return 0;
}

uintptr_t getFlashAddrFirstCopy() {
	switch (determineDevice()) {
		case DeviceType::DualBank1MB:
			// Sector 18, second to last 128K sector
			return 0x080C0000;
		case DeviceType::SingleBank1MB:
			// Sector 7, last 256K sector
			return 0x080C0000;
		case DeviceType::DualBank2MB: /* falls thru */
		case DeviceType::SingleBank2MB:
			// Start of the second megabyte
			// Sector 12 for dual bank
			// Sector 8 for single bank
			return 0x08100000;
		default:
			return 0;
	}
}

uintptr_t getFlashAddrSecondCopy() {
	switch (determineDevice()) {
		case DeviceType::DualBank1MB:
			// Sector 19, last 128K sector, 128K after the first copy
			return 0x080E0000;
		case DeviceType::DualBank2MB:
			// Sector 14, 32K after the first copy
			return 0x08108000;
		case DeviceType::SingleBank2MB:
			// Sector 9, 256K after the first copy
			return 0x08140000;
		case DeviceType::SingleBank1MB:
			// We can't fit a second copy in this config, fall thru to failure case
		default:
			return 0;
	}
}

#define FLASH_ACR           (*(volatile uint32_t *)(FLASH_BASE + 0x00))
#define FLASH_KEYR          (*(volatile uint32_t *)(FLASH_BASE + 0x04))
#define FLASH_OPTKEYR       (*(volatile uint32_t *)(FLASH_BASE + 0x08))
#define FLASH_SR            (*(volatile uint32_t *)(FLASH_BASE + 0x0C))
#define FLASH_CR            (*(volatile uint32_t *)(FLASH_BASE + 0x10))
#define FLASH_OPTCR         (*(volatile uint32_t *)(FLASH_BASE + 0x14))

#define FLASH_OPTCR_STRT                       (1 << 1)

#define FLASH_OPTKEY1                         (0x08192A3B)
#define FLASH_OPTKEY2                         (0x4C5D6E7F)

/*
static void flash_wait_complete()
{
	do { __DSB(); } while (FLASH->SR & FLASH_SR_BSY);
}

static void stm32f7_flash_mass_erase_dual_block()
{
    FLASH_CR |= FLASH_CR_MER1 | FLASH_CR_MER2;
    FLASH_CR |= FLASH_CR_STRT;
    flash_wait_complete();
    FLASH_CR &= ~(FLASH_CR_MER1 | FLASH_CR_MER2);
}
*/
/*
STOP mode for F7 is needed for wakeup from multiple EXTI pins. For example PD0, which is CAN rx.
However, for F40X & F42X this may be useless. STOP in itself eats more current than standby. 
With F4 only having PA0 available for wakeup, this negates its need.
*/
/*
void stm32_stop() {
	SysTick->CTRL = 0;
	SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;

	// Turn off the LEDs, those use some power
	enginePins.errorLedPin.setValue(0);
	enginePins.runningLedPin.setValue(0);
	enginePins.communicationLedPin.setValue(0);
	enginePins.warningLedPin.setValue(0);

	// Do anything the board wants to prepare for stop mode - enabling wakeup sources!
	boardPrepareForStop();

	PWR->CSR1 |= PWR_CSR1_WUIF;
	PWR->CR1 &= ~PWR_CR1_PDDS;	// cleared PDDS means stop mode (not standby) 
	PWR->CR1 |= PWR_CR1_FPDS;	// turn off flash in stop mode
	PWR->CR1 |= PWR_CR1_UDEN;	// regulator underdrive in stop mode
	PWR->CR1 |= PWR_CR1_LPUDS;	// low power regulator in under drive mode
	PWR->CR1 |= PWR_CR1_LPDS;	// regulator in low power mode

	// enable Deepsleep mode
	__disable_irq();
	__WFI();

	// Lastly, reboot
	NVIC_SystemReset();
}
*/

/* 
Standby for both F4 & F7 works perfectly, with very little curent consumption. Downside is that theres a limited amount of pins that can wakeup F7, and only PA0 for F4XX.
Cannot be used for CAN wakeup without hardware modificatinos.
*/
void stm32_standby() {
	SysTick->CTRL = 0;
	SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
	PWR->CR1 |= PWR_CR1_PDDS;	// PDDS = use standby mode (not stop mode)
	PWR->CR1 |= PWR_CR1_CSBF;	// Clear standby flag

	// Do anything the board wants to prepare for standby mode - enabling wakeup sources!
	boardPrepareForStandby();

	__disable_irq();
	__WFI();
}