15 lines
1.2 KiB
Plaintext
15 lines
1.2 KiB
Plaintext
1) RESOLVED IN R0.2 Move C26, it's currently under an inductor. 2 parts can not sit in the same physical space
|
|
2) RESOLVED IN R0.2 Add via for battery wire to be attached.
|
|
3) RESOLVED IN R0.2 L1 wire leads interfere with C14 and C15.
|
|
4) RESOLVED IN R0.2 Jumpers are not needed. Connect VccIO->VccIO_Ext and Clk->Y1-3
|
|
5) RESOLVED IN R0.2 D9 had wrong footprint blah. Wrong pin numbers to wrong pins.
|
|
6) RESOLVED IN R0.2 D10 --> D10_2, and D11 --> D11_2 should be the same package, they were 2 different / wrong footprints.
|
|
7) RESOLVED IN R0.3 Moved several 0805 components to the back side of the PCB for lower cost assembly.
|
|
8) J15 needs silk and larger hole. J20 needs silk and should use same larger terminal as J8-J9-J10
|
|
9) J15 & J20 silk ^^^ should be on both top and bottom sides of the board
|
|
10) power LED. back side is pretty much free pre-assembled, front side is manual assembly. maybe one LED on each side?
|
|
11) J5&J6 why do we need as jumpers? Shall we connect those permanently since looks like those shall be connected?
|
|
12) move more small stuff to same (back) side
|
|
13)
|
|
14)
|
|
15) |