History

rusefi 80213ca80d only:engineConfiguration->auxTempSensor2.config.bias_resistor = HELLEN_DEFAULT_AT_PULLUP;		2024-06-26 22:58:06 -04:00
..
ChibiOS@41625a9b63	ChibiOS: minor stm32 usart/serial driver updates	2024-06-19 13:56:34 -04:00
ChibiOS-Contrib@63b50e410c	…
bin	…
bootloader	…
config	only:engineConfiguration->auxTempSensor2.config.bias_resistor = HELLEN_DEFAULT_AT_PULLUP;	2024-06-26 22:58:06 -04:00
console	add comment	2024-06-25 10:34:04 -04:00
controllers	Update date	2024-06-27 00:20:00 +00:00
development	…
docs	…
ext	…
ext_algo	…
hw_layer	hardware: no need to access fastAdc	2024-06-25 16:54:21 -04:00
init	only:thermistor_t	2024-06-19 18:47:46 -04:00
integration	only:ts_show_wbo_canbus_set_index	2024-06-26 16:55:30 -04:00
libfirmware@544cdecdd5	only:alphax-silver	2024-06-23 17:21:21 -04:00
pch	…
tunerstudio	Auto-generated configs and docs	2024-06-26 21:05:26 +00:00
util	https://github.com/rusefi/rusefi/pull/5394	2024-06-17 19:32:21 -04:00
.cproject	…
.gitattributes	…
.gitignore	…
.project	…
CHANGELOG.md	only:Launch to accept lua-based clutch and brake pedals fix #6658	2024-06-24 22:33:55 -04:00
Doxyfile	…
DoxygenLayout.xml	…
Makefile	…
build-notes.txt	…
bundle.mk	…
check_illegal_conversion.sh	…
clean_build.bat	…
common.mk	…
compile_and_program.bat	…
configuration_check.cpp	…
cov_config.bat	…
cov_run.bat	…
coverity.yml	…
docs_enums.mk	…
dump.bat	…
dump_release.bat	…
egt2can.cpp	…
exception.txt	…
flash.bat	…
flash_bin.bat	…
flash_can.sh	…
flash_dfu.bat	…
flash_dfu.sh	…
flash_dfu_bin.bat	…
flash_dfu_erase.sh	…
flash_dfu_openblt_only.sh	…
flash_erase407.bat	…
flash_erase407.sh	…
flash_erase767.bat	…
flash_erase_dfu.bat	…
flash_openocd407.bat	…
flash_openocd407.sh	…
flash_openocd767.bat	…
flash_openocd_h7.bat	…
flash_reboot_dfu.bat	…
flash_release.bat	…
flash_uart.sh	…
flash_usb.sh	…
gcc_version_check.c	…
gen_config.bat	…
gen_config.sh	…
gen_config_board.bat	…
gen_config_board.sh	…
gen_config_common.sh	only:BOARD_CONSTANTS_EXTENSIONS_FROM_FILE	2024-06-25 18:41:27 -04:00
gen_config_default.sh	…
gen_default_everything.sh	…
gen_enum_to_string.bat	…
gen_enum_to_string.sh	…
gen_live_documentation.bat	…
gen_live_documentation.sh	…
gen_perf_trace_enum.sh	…
gen_ptrace_enums.bat	…
gen_signature.sh	…
gen_trigger_images.bat	…
generate_docs.bat	…
generate_memory_usage_report.bat	…
generate_memory_usage_report.sh	…
get_performance_trace.bat	…
global.h	…
kill_for_coverity.c	…
main.cpp	…
make4.bat	…
provide_gcc.sh	…
readme.md	…
reboot_dfu.sh	…
reboot_ecu.bat	…
run_hw_test.bat	…
rusefi.cpp	…
rusefi.h	…
rusefi.mk	…
rusefi_config.mk	…
rusefi_pch.mk	…
rusefi_rules.mk	…
send_command.bat	…
setup_linux_environment.sh	…
target_sentinel.mk	…

readme.md

End users should be able to use pre-built firmware. They should not need to build or modify the source code. See https://github.com/rusefi/rusefi/wiki/Download

Doxygen <<< landing page has best implementation introduction.

Q&A on source code

This directory contains the source code for the rusEFI embedded firmware.

TL;DR

make

Environment

Embedded firmware is build on top of https://www.chibios.org/ with plain Makefile gcc version 12 (See https://github.com/rusefi/rusefi/blob/master/.github/workflows/hardware-ci.yaml to confirm current GCC version)

Windows development is fully supported with Cygwin, WSL or Linux is recommended due to poor NTFS performance.