16 lines
1.2 KiB
Plaintext
16 lines
1.2 KiB
Plaintext
1) RESOLVED IN R0.2 PA9 <> USB VBUS trace is needed to get USB functional
|
|
2) RESOLVED IN R0.2 add vertical USB connector option (same as on Frankenso)
|
|
3) RESOLVED IN R0.2 use stlink 5x2 header
|
|
4) RESOLVED IN R0.2 renamed sm32f407_Board to STM32F407_Brain_Board
|
|
5) RESOLVED IN R0.4 Some fab shops do not like soldering 0R 0805 on JUMPER footprint. Need to convert JP1, JP2, JP3 & JP4 to "SM0805_jumper"
|
|
6) RESOLVED IN R0.2 Change Fuse to match frankenso
|
|
7) RESOLVED IN R0.2 set solder mask to 0.003 inches, per OSHPark suggestion.
|
|
8) RESOLVED IN R0.3 Check if there is a chance to match discovery board reset button location
|
|
9) RESOLVED IN R0.3 Move push buttons to match the STM32F407 Discovery board's locations.
|
|
10) RESOLVED IN R0.3 Changed diodes to 0805 diodes.
|
|
11) RESOLVED IN R0.4 Added zone cut outs such that boards can have engraved serial numbers.
|
|
12) as another approach to #5 problem, maybe we can add traces connecting JP1, JP2, JP3 & JP4 pads? On the back? By defult the trace would be used, if desired trace could be removed with a knife?
|
|
13) RESET and USER button HUGE silkscreen is needed
|
|
14) silkscreen area for board unique number engraving
|
|
|