rusefi/firmware/config/boards/s105/connectors/s105.yaml

689 lines
9.8 KiB
YAML

pins:
- pin: 1a
id: D14
function: na Ignition coil 3
class: outputs
ts_name: na 1 - IGN_3
type: ls
- pin: 2a
id: D12
function: Ignition coil 2,3
class: outputs
ts_name: 2 - IGN_2_3
type: ls
- pin: 3a
function: Ignition GND
type: GND
- pin: 4a
id: D15
function: na Ignition coil 4
class: outputs
ts_name: na 4 - IGN_4
type: ls
- pin: 5a
id: D13
function: Ignition coil 1
class: outputs
ts_name: 5 - IGN_1_4
type: ls
# 6-24 segment
- pin: 6a
id: D9
function: Injector 2
class: outputs
ts_name: 6 - INJ_2
type: ls
- pin: 7a
id: D10
function: Injector 3
class: outputs
ts_name: 7 - INJ_3
type: ls
- pin: 8a
id: B8
function: na Tach Out
class: outputs
ts_name: na 8 - TACH
type: ls
- pin: 9a
id: E0
function: Unk Out 1
class: outputs
ts_name: 9 - Unk Out 1
type: ls
- pin: 10a
id: B9
function: ECO Out / CLT Gauge out
class: outputs
ts_name: 10 - ECO/CLT Out
type: ls
- pin: 13a
id: [ B0, EFI_ADC_8 ]
function: Ignition switch in (15)
class: [ switch_inputs, analog_inputs ]
ts_name: 13 - Ignition switch in (15)
- pin: 15a
id: [ B10, B10 ]
function: Crank Sensor+
class: [event_inputs, switch_inputs]
ts_name: 15 - Crank Sensor+
- pin: 16a
id: EFI_ADC_1
class: analog_inputs
function: TPS (22K+41.2K divider, 100K pull-down)
ts_name: 16 - TPS
- pin: 17a
function: GNDA (MAP, IAT)
- pin: 18a
id: EFI_ADC_7
class: analog_inputs
function: AFR 1 (470K pull-up to +5)
ts_name: 18 - AFR 1
- pin: 19a
id: EFI_ADC_2
class: analog_inputs
function: Knock
ts_name: 19 - Knock
- pin: 20a
function: GNDA (Knock, AFR)
- pin: 21a
id: EFI_ADC_6
class: analog_inputs
function: opt AC Press (22K pull-down)
ts_name: opt 21 - AC Press
# 25-43 segment
- pin: 25a
id: D0
function: na Rear Diff lock out
class: outputs
ts_name: na 25 - R Diff Lock
type: ls
- pin: 27a
id: D8
function: Injector 1
class: outputs
ts_name: 27 - INJ_1
type: ls
- pin: 28a
id: C7
function: Idle valve close
class: outputs
ts_name: 28 - Idle valve close
type: ls
- pin: 29a
id: C6
function: Idle valve open
class: outputs
ts_name: 29 - Idle valve open
type: ls
- pin: 30a
id: E9
function: opt Fan relay 2 / Unk Out 2
class: outputs
ts_name: opt 20 - Fan relay 2 / Unk Out 2
type: ls
- pin: 31a
id: E14
function: CEL Output
class: outputs
ts_name: 31 - CEL
type: ls
- pin: 32a
function: +5V supply out (MAP, TPS)
type: 5v
# id: EFI_ADC_10
# class: analog_inputs
# function: 5V sense
# ts_name: 32 - 5V sense
- pin: 33a
function: na +5 supply out
type: 5v
- pin: 34a
function: Crank Sensor-
- pin: 35a
function: na GNDA
- pin: 36a
function: GNDA (TPS, CLT, AFR 1)
- pin: 37a
id: EFI_ADC_11
class: analog_inputs
function: na MAF
ts_name: na 37 - MAF
- pin: 39a
id: EFI_ADC_3
class: analog_inputs
function: CLT (1.5K pull-up to 3.3V, 22K pull-down)
ts_name: 39 - CLT
- pin: 40a
id: EFI_ADC_14
class: analog_inputs
function: IAT (1.5K pull-up to 3.3V, 22K pull-down)
ts_name: 40 - IAT
- pin: 43a
function: Prog Mode
- pin: 44a
id: EFI_ADC_9
class: analog_inputs
function: +12 sense (MR) (68K+6.8K divider)
ts_name: 44 - +12 sense (MR)
# 44-62 segment
- pin: 46a
id: B14
function: Vapor Absorber Valve
class: outputs
ts_name: 46 - Absorber
type: ls
- pin: 47a
id: D11
function: Injector 4
class: outputs
ts_name: 47 - INJ_4
type: ls
- pin: 48a
id: E5
function: AFR 1 Heater
class: outputs
ts_name: 48 - AFR 1 Heater
type: ls
- pin: 49a
id: E6
function: AFR2 Heater
class: outputs
ts_name: na 49 - AFR 2 Heater
type: ls
- pin: 50a
id: E12
function: Starter Disable Relay
class: outputs
ts_name: 50 - Starter Disable Relay
type: ls
- pin: 51a
function: GND (ECU)
- pin: 52a
function: GNDA (Shield)
- pin: 53a
function: GNDA (AFR 1/2, Knock)
- pin: 54a
function: GNDA (MAF)
- pin: 55a
id: EFI_ADC_5
class: analog_inputs
function: opt AFR 2 (470K pull-up to +5)
ts_name: opt 55 - AFR 2
- pin: 56a
id: EFI_ADC_0
class: analog_inputs
function: MAP (22K+41.2K divider, 100K pull-down)
ts_name: 56 - MAP
- pin: 59a
id: [B3]
function: Speed input (4.7K Pull-up)
class: [event_inputs]
ts_name: 59 - Speed in
- pin: 61a
function: GND (Outputs)
- pin: 62a
function: CAN bus high
type: can
# 63-81 segment
- pin: 63a
function: +12V in (MR)
# See 44a
# id: EFI_ADC_9
# class: analog_inputs
# function: +12v (MR) (68K+6.8K divider)
# ts_name: 63 VBat
# type: vign
- pin: 68a
id: D6
function: opt Fan Relay 1
class: outputs
ts_name: opt 58 - Fan Relay 1
type: ls
- pin: 69a
id: E10
function: opt AC Relay
class: outputs
ts_name: opt 69 - AC Relay
type: ls
- pin: 70a
id: D2
function: Fuel Pump Relay
class: outputs
ts_name: 70 - Fuel Pump Relay
type: ls
- pin: 71a
function: K-line
- pin: 72a
id: [C12]
function: Identification in (4.7K pull-up to 3.3V)
class: [switch_inputs]
ts_name: 72 - Identification in
- pin: 73a
id: [C11]
function: opt Oil Pressure Warning Input
class: [switch_inputs]
ts_name: opt 72 - Oil Press Warning In
- pin: 75a
id: [C13]
function: opt Air Condition Request Input
class: [switch_inputs]
ts_name: opt 75 - AC Request In
- pin: 76a
id: [C10]
function: Diff Lock Request Input
class: [switch_inputs]
ts_name: 76 - Diff Lock Req In
- pin: 77a
id: [D4]
function: opt Starter Request Input (4.7K Pull-down)
class: [switch_inputs]
ts_name: opt 77 - Starter Req In
- pin: 79a
id: [B11]
function: na Camshaft sensor (not populated)
class: [event_inputs]
ts_name: na 79 - CAM in
- pin: 80a
function: GND (Outputs)
- pin: 81a
function: CAN bus low
type: can
info:
title: S105
board_url: https://github.com/rusefi/S105
directory: s105
name: S105
image:
file: 121pin.jpg
pins:
- pin: 1a
x: 286
y: 582
- pin: 2a
x: 456
y: 582
- pin: 3a
x: 375
y: 405
- pin: 4a
x: 286
y: 250
- pin: 5a
x: 456
y: 250
# 6-24 segment
- pin: 6a
x: 2193
y: 250
- pin: 7a
x: 2113
y: 250
- pin: 8a
x: 2033
y: 250
- pin: 9a
x: 1953
y: 250
- pin: 10a
x: 1873
y: 250
- pin: 11a
x: 1793
y: 250
- pin: 12a
x: 1713
y: 250
- pin: 13a
x: 1633
y: 250
- pin: 14a
x: 1553
y: 250
- pin: 15a
x: 1473
y: 250
- pin: 16a
x: 1393
y: 250
- pin: 17a
x: 1313
y: 250
- pin: 18a
x: 1233
y: 250
- pin: 19a
x: 1153
y: 250
- pin: 20a
x: 1073
y: 250
- pin: 21a
x: 993
y: 250
- pin: 22a
x: 913
y: 250
- pin: 23a
x: 833
y: 250
- pin: 24a
x: 753
y: 250
# 25-43 segment
- pin: 25a
x: 2193
y: 330
- pin: 26a
x: 2113
y: 330
- pin: 27a
x: 2033
y: 330
- pin: 28a
x: 1953
y: 330
- pin: 29a
x: 1873
y: 330
- pin: 30a
x: 1793
y: 330
- pin: 31a
x: 1713
y: 330
- pin: 32a
x: 1633
y: 330
- pin: 33a
x: 1553
y: 330
- pin: 34a
x: 1473
y: 330
- pin: 35a
x: 1393
y: 330
- pin: 36a
x: 1313
y: 330
- pin: 37a
x: 1233
y: 330
- pin: 38a
x: 1153
y: 330
- pin: 39a
x: 1073
y: 330
- pin: 40a
x: 993
y: 330
- pin: 41a
x: 913
y: 330
- pin: 42a
x: 833
y: 330
- pin: 43a
x: 753
y: 330
# 44-62 segment
- pin: 44a
x: 2193
y: 495
- pin: 45a
x: 2113
y: 495
- pin: 46a
x: 2033
y: 495
- pin: 47a
x: 1953
y: 495
- pin: 48a
x: 1873
y: 495
- pin: 49a
x: 1793
y: 495
- pin: 50a
x: 1713
y: 495
- pin: 51a
x: 1633
y: 495
- pin: 52a
x: 1553
y: 495
- pin: 53a
x: 1473
y: 495
- pin: 54a
x: 1393
y: 495
- pin: 55a
x: 1313
y: 495
- pin: 56a
x: 1233
y: 495
- pin: 57a
x: 1153
y: 495
- pin: 58a
x: 1073
y: 495
- pin: 59a
x: 993
y: 495
- pin: 60a
x: 913
y: 495
- pin: 61a
x: 833
y: 495
- pin: 62a
x: 732
y: 495
# 63-81 segment
- pin: 63a
x: 2193
y: 579
- pin: 64a
x: 2113
y: 579
- pin: 65a
x: 2033
y: 579
- pin: 66a
x: 1953
y: 579
- pin: 67a
x: 1873
y: 579
- pin: 68a
x: 1793
y: 579
- pin: 69a
x: 1713
y: 579
- pin: 70a
x: 1633
y: 579
- pin: 71a
x: 1553
y: 579
- pin: 72a
x: 1473
y: 579
- pin: 73a
x: 1393
y: 579
- pin: 74a
x: 1313
y: 579
- pin: 75a
x: 1233
y: 579
- pin: 76a
x: 1153
y: 579
- pin: 77a
x: 1073
y: 579
- pin: 78a
x: 993
y: 579
- pin: 79a
x: 913
y: 579
- pin: 80a
x: 833
y: 579
- pin: 81a
x: 732
y: 579