47 lines
1.7 KiB
Makefile
47 lines
1.7 KiB
Makefile
# Combine the related files for a specific platform and MCU.
|
|
|
|
# Target ECU board design
|
|
BOARDCPPSRC = $(BOARDS_DIR)/microrusefi/board_configuration.cpp
|
|
|
|
# Target processor details
|
|
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
|
|
BOARDINC = $(BOARDS_DIR)/microrusefi
|
|
BOARDINC += $(PROJECT_DIR)/config/stm32f4ems # For board.h
|
|
BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h
|
|
else
|
|
BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h
|
|
endif
|
|
|
|
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
|
|
LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=Gpio::E3
|
|
endif
|
|
|
|
|
|
# *TEMPORARY* breaking TTL thus breaking Bluetooth for microRusEFI in order to enable SPI3 for SD card
|
|
# *TODO* need to give people the horrible choice between Bluetooth via TTL or SD card via SPI :( horrible choice
|
|
EFI_CONSOLE_TTL_PINS = -DEFI_CONSOLE_TX_BRAIN_PIN=Gpio::B10 -DEFI_CONSOLE_RX_BRAIN_PIN=Gpio::B11
|
|
|
|
# on MRE 0.6.0 we have SD card on SPI2 which shared channel 3 with USART3
|
|
# todo: enable serial which would not DMA thus not conflict?
|
|
DDEFS += -DSTM32_UART_USE_USART3=FALSE -DHAL_USE_UART=FALSE
|
|
DDEFS += -DEFI_USE_UART_DMA=FALSE -DTS_NO_PRIMARY=TRUE
|
|
|
|
DDEFS += -DEFI_CAN_SERIAL=TRUE
|
|
|
|
DDEFS += -DEFI_CJ125=FALSE -DBOARD_L9779_COUNT=0 -DEFI_HD44780_LCD=FALSE -DEFI_LCD=FALSE
|
|
|
|
# Add them all together
|
|
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"microRusEFI\" $(LED_CRITICAL_ERROR_BRAIN_PIN) $(EFI_CONSOLE_TTL_PINS) -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
|
DDEFS += $(VAR_DEF_ENGINE_TYPE)
|
|
|
|
# We are running on microRusEFI hardware!
|
|
DDEFS += -DHW_MICRO_RUSEFI=1
|
|
|
|
ifeq ($(PROJECT_CPU),ARCH_STM32F7)
|
|
DDEFS += -DSHORT_BOARD_NAME=mre_f7
|
|
else ifeq ($(PROJECT_CPU),ARCH_STM32F4)
|
|
DDEFS += -DSHORT_BOARD_NAME=mre_f4
|
|
else
|
|
$(error Unsupported PROJECT_CPU for microRusEFI: [$(PROJECT_CPU)])
|
|
endif
|