docs improvements

This commit is contained in:
rusefi 2020-03-27 01:39:10 -04:00
parent 9d0adeaf4b
commit 86b83c0326
2 changed files with 23 additions and 13 deletions

View File

@ -1,6 +1,7 @@
microRusEfi is a highly integrated board for rusEfi ECU. microRusEfi is targeted at port injected
gasoline engines with one, two, three or four cylinders. microRusEfi has means to control electronic throttle body.
[Connector Pinout](Hardware_microRusEfi_wiring)
microRusEfi latest schematics is available at https://github.com/rusefi/hw_microRusEfi/blob/master/microRusEfi_Schematic.pdf
@ -8,16 +9,22 @@ microRusEfi latest schematics is available at https://github.com/rusefi/hw_micro
Complete set of board source files is available at https://github.com/rusefi/hw_microRusEfi
Board overview:
- about 10 analog inputs
- One VR/Hall input channel for crank sensor
- One Hall input channel for crank sensor
- 4 injector output channels
- 4 logic level coil control channels (external igniters could be needed for some coils)
- USB
- CAN
# Capabilities
* Primary VR or Hall input (configurable with few resistor changes)
* Secondary Hall input
* x4 analog thermistor (temperature) inputs
* x10 analog voltage inputs (0-5v)
* x4 high-Z injector outputs
* x2 high-current low side outputs for IAC/VVT/other solenoids
* Dedicated main relay control output
* x4 low-current low side outputs for relays or warning lights
* x4 5v logic-level ignition outputs
* x2 5v/12v configurable logic level outputs (requires resistor changes)
* Electronic throttle body (drive by wire)
* CAN connectivity on the plug
* USB connectivity on the plug
[Connector Pinout](Hardware_microRusEfi_wiring)
For wiring see [rusEfi wiring](Hardware_microRusEfi_wiring)
![microRusEfi image](Hardware/microrusefi/Hardware_microRusEfi_0_1_pcb.jpg)

View File

@ -8,6 +8,8 @@ Rear side of PCB
![microRusEfi photo](Hardware/microrusefi/Hardware_microRusEfi_connector.jpg)
![connector](Hardware/microrusefi/Hardware_microRusEfi_connector.png)
# Pin Descriptions
Each pin has a *Type ID*, which can be used to look up in the following tables what the pin is for, and what functions it can perform.
@ -107,11 +109,12 @@ These tables provide technical information about the different types of pin foun
| can | CAN bus | CAN communication
USB cable green wire: USB D+ DATA+
USB cable white wire: USB D- DATA-
USB cable black wire: ground
USB cable red wire: +5v (optional)
![connector](Hardware/microrusefi/Hardware_microRusEfi_connector.png)
USB cable white wire: USB D- DATA-
USB cable black wire: ground
USB cable red wire: +5v (optional)
## Hall type Crank sensor