noisymime
/
Arduino
mirror of https://github.com/noisymime/Arduino.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Arduino/hardware/arduino/bootloaders/optiboot/optiboot_luminet.hex

41 lines
1.6 KiB
Plaintext
Raw Normal View History

http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101D0000112484B714BE81FF17D185E08EBD8EE00B
:101D1000FFD0D49AD29A86E023EC3FEF91E03DBD0C
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101D20002CBD9BB9589BFECFCC9AA8958150B9F792
:101D3000BB24B39425E0A22E9FE7D92E8EECC82EAB
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101D4000D4D0813421F481E0EFD083E0B5C0823477
:101D500011F484E103C0853419F485E0E5D0B3C003
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101D6000853569F4C2D0E82EFF24BFD0082F10E0DB
:101D7000102F00270E291F29000F111FA3C0863521
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101D800021F484E0D1D080E097C0843609F060C0AF
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101D9000ACD0ABD0F82EA9D0C0E0D1E0A6D08993CA
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101DA000FC16E1F783E0F80187BFE895B5D007B6E8
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101DB00000FCFDCF0115110511F0A8012AC080918A
:101DC00000012091010130E0322F222790E0282BE2
:101DD000392B309385012093840140910801809133
:101DE000090190E0982F882750E0842B952B909341
:101DF0008701809386012450304020930801232FCF
:101E0000332720930901D0920001C092010140E0E4
:101E100050E0A0E0B1E02C9130E011968C91119748
:101E200090E0982F8827822B932B1296FA010C01B1
:101E3000B7BEE89511244E5F5F4FF1E0A034BF07B5
:101E400051F7F801A7BEE89507B600FCFDCF3BC0EF
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101E5000843751F54AD049D0F82E47D05DD0E801FB
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101E6000EF2C209719F48091840114C0C130D10562
:101E700019F4809185010EC0C830D10519F4809104
:101E8000860108C0C930D10519F48091870102C0CC
:101E9000FE01849121961AD0EA9419F70F5F1F4F23
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101EA000FA940F0D111D0FC0853741F435D08EE126
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:101EB0000DD083E90BD08CE009D005C0813511F439
http://code.google.com/p/arduino/issues/detail?id=368 Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) (cherry picked from commit e81c1123b624b6cac7da018c9c786700f3152bc9)
2011-06-13 19:07:07 -07:00
:101EC00088E026D029D080E101D03ACF2AE030E066
:101ED0008095089410F4DA9802C0DA9A000014D0C1
:101EE00013D086952A95B1F7089529E030E0CB9973
:101EF000FECF0AD009D008D08894CB9908942A95AF
:101F000011F08795F7CF08959EE09A95F1F708951F
:101F100098E191BD81BD0895E8DF803219F088E035
:101F2000F7DFFFCF84E1D2CF1F93182FDEDF1150F0
:101F3000E9F7F2DF1F91089580E0EADFE4E0FF2790
:021F4000099402
:021EFE000304DB
(make sure .hex and .lst are updated as well.) (cherry picked from commit ece29c380556878ba8efebce8801a7f076c61ada)
2011-06-11 03:17:38 -07:00
:0400000300001D00DC
Adding optiboot and Arduino Uno boards menu entry.
2010-09-22 06:04:33 -07:00
:00000001FF