diff --git a/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino b/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino
new file mode 100644
index 000000000..85207eac0
--- /dev/null
+++ b/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino
@@ -0,0 +1,112 @@
+/*
+ 
+ This example connects to an unencrypted Wifi network. 
+ Then it prints the  MAC address of the Wifi shield,
+ the IP address obtained, and other network details.
+
+ Circuit:
+ * WiFi shield attached
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 29 Feb 2012
+ by Scott Fitzgerald
+ */
+ #include <WiFi.h>
+
+char ssid[] = "yourNetwork";     // the name of your network
+int status = WL_IDLE_STATUS;     // the Wifi radio's status
+
+void setup() {
+  // initialize serial:
+  Serial.begin(9600);
+
+  // attempt to connect to an open network:
+  Serial.print("Attempting to connect to open network: ");
+  Serial.println(ssid);
+  status = WiFi.begin(ssid);
+
+  // if you're not connected, stop here:
+  if ( status != WL_CONNECTED) { 
+    Serial.println("Couldn't get a wifi connection");
+    while(true);
+  } 
+  // if you are connected :
+  else {
+      Serial.print("You're connected to the network");
+      printCurrentNet();
+      printWifiData();
+  }
+}
+
+void loop() {
+  // check the network connection once every 10 seconds:
+  delay(10000);
+  printCurrentNet();
+}
+
+void printWifiData() {
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+  
+  // print your MAC address:
+  byte mac[6];  
+  WiFi.macAddress(mac);
+  Serial.print("MAC address: ");
+  Serial.print(mac[5],HEX);
+  Serial.print(":");
+  Serial.print(mac[4],HEX);
+  Serial.print(":");
+  Serial.print(mac[3],HEX);
+  Serial.print(":");
+  Serial.print(mac[2],HEX);
+  Serial.print(":");
+  Serial.print(mac[1],HEX);
+  Serial.print(":");
+  Serial.println(mac[0],HEX);
+  
+  // print your subnet mask:
+  IPAddress subnet = WiFi.subnetMask();
+  Serial.print("NetMask: ");
+  Serial.println(subnet);
+
+  // print your gateway address:
+  IPAddress gateway = WiFi.gatewayIP();
+  Serial.print("Gateway: ");
+  Serial.println(gateway);
+}
+
+void printCurrentNet() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print the MAC address of the router you're attached to:
+  byte bssid[6];
+  WiFi.BSSID(bssid);    
+  Serial.print("BSSID: ");
+  Serial.print(bssid[5],HEX);
+  Serial.print(":");
+  Serial.print(bssid[4],HEX);
+  Serial.print(":");
+  Serial.print(bssid[3],HEX);
+  Serial.print(":");
+  Serial.print(bssid[2],HEX);
+  Serial.print(":");
+  Serial.print(bssid[1],HEX);
+  Serial.print(":");
+  Serial.println(bssid[0],HEX);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal sgtrength (RSSI):");
+  Serial.println(rssi);
+
+  // print the encryption type:
+  byte encryption = WiFi.encryptionType();
+  Serial.print("Encryption Type:");
+  Serial.println(encryption,HEX);
+}
+
diff --git a/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino b/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino
new file mode 100644
index 000000000..e97871d23
--- /dev/null
+++ b/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino
@@ -0,0 +1,105 @@
+/*
+ 
+ This example connects to an unencrypted Wifi network. 
+ Then it prints the  MAC address of the Wifi shield,
+ the IP address obtained, and other network details.
+
+ Circuit:
+ * WiFi shield attached
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 29 Feb 2012
+ by Scott Fitzgerald
+ */
+ #include <WiFi.h>
+
+char ssid[] = "YourNetwork";     // your network SSID (name) 
+char key[] = "725d223132";       // your network key
+int keyIndex = 0;                // your network key Index number
+int status = WL_IDLE_STATUS;     // the Wifi radio's status
+
+void setup() {
+  // initialize serial:
+  Serial.begin(9600);
+
+  // attempt to connect to an open network:
+  Serial.print("Attempting to connect to WEP network: ");
+  Serial.println(ssid);
+  status = WiFi.begin(ssid, pass, key);
+  
+  // if you're not connected, stop here:
+  if ( status != WL_CONNECTED) { 
+    Serial.println("Couldn't get a wifi connection");
+    while(true);
+  } 
+  // if you are connected :
+  else {
+      Serial.print("You're connected to the network");
+      printCurrentNet();
+      printWifiData();
+  }
+}
+
+void loop() {
+  // check the network connection once every 10 seconds:
+  delay(10000);
+  printCurrentNet();
+}
+
+void printWifiData() {
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+  
+  // print your MAC address:
+  byte mac[6];  
+  WiFi.macAddress(mac);
+  Serial.print("MAC address: ");
+  Serial.print(mac[5],HEX);
+  Serial.print(":");
+  Serial.print(mac[4],HEX);
+  Serial.print(":");
+  Serial.print(mac[3],HEX);
+  Serial.print(":");
+  Serial.print(mac[2],HEX);
+  Serial.print(":");
+  Serial.print(mac[1],HEX);
+  Serial.print(":");
+  Serial.println(mac[0],HEX);
+}
+
+void printCurrentNet() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print the MAC address of the router you're attached to:
+  byte bssid[6];
+  WiFi.BSSID(bssid);    
+  Serial.print("BSSID: ");
+  Serial.print(bssid[5],HEX);
+  Serial.print(":");
+  Serial.print(bssid[4],HEX);
+  Serial.print(":");
+  Serial.print(bssid[3],HEX);
+  Serial.print(":");
+  Serial.print(bssid[2],HEX);
+  Serial.print(":");
+  Serial.print(bssid[1],HEX);
+  Serial.print(":");
+  Serial.println(bssid[0],HEX);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal sgtrength (RSSI):");
+  Serial.println(rssi);
+
+  // print the encryption type:
+  byte encryption = WiFi.encryptionType();
+  Serial.print("Encryption Type:");
+  Serial.println(encryption,HEX);
+  Serial.println();
+}
+
diff --git a/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino b/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino
new file mode 100644
index 000000000..7813ba8e1
--- /dev/null
+++ b/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino
@@ -0,0 +1,105 @@
+/*
+ 
+ This example connects to an unencrypted Wifi network. 
+ Then it prints the  MAC address of the Wifi shield,
+ the IP address obtained, and other network details.
+
+ Circuit:
+ * WiFi shield attached
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 29 Feb 2012
+ by Scott Fitzgerald
+ */
+ #include <WiFi.h>
+
+char ssid[] = "networkName";     //  your network SSID (name) 
+char pass[] = "yourPassword";    // your network password
+int status = WL_IDLE_STATUS;     // the Wifi radio's status
+
+void setup() {
+  // initialize serial:
+  Serial.begin(9600);
+
+  // attempt to connect to an open network:
+  Serial.print("Attempting to connect to WPA network: ");
+  Serial.println(ssid);
+  status = WiFi.begin(ssid, pass);
+  
+  // if you're not connected, stop here:
+  if ( status != WL_CONNECTED) { 
+    Serial.println("Couldn't get a wifi connection");
+    while(true);
+  } 
+  // if you are connected :
+  else {
+      Serial.print("You're connected to the network");
+      printCurrentNet();
+      printWifiData();
+  }
+}
+
+void loop() {
+  // check the network connection once every 10 seconds:
+  delay(10000);
+  printCurrentNet();
+}
+
+void printWifiData() {
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+  
+  // print your MAC address:
+  byte mac[6];  
+  WiFi.macAddress(mac);
+  Serial.print("MAC address: ");
+  Serial.print(mac[5],HEX);
+  Serial.print(":");
+  Serial.print(mac[4],HEX);
+  Serial.print(":");
+  Serial.print(mac[3],HEX);
+  Serial.print(":");
+  Serial.print(mac[2],HEX);
+  Serial.print(":");
+  Serial.print(mac[1],HEX);
+  Serial.print(":");
+  Serial.println(mac[0],HEX);
+ 
+}
+
+void printCurrentNet() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print the MAC address of the router you're attached to:
+  byte bssid[6];
+  WiFi.BSSID(bssid);    
+  Serial.print("BSSID: ");
+  Serial.print(bssid[5],HEX);
+  Serial.print(":");
+  Serial.print(bssid[4],HEX);
+  Serial.print(":");
+  Serial.print(bssid[3],HEX);
+  Serial.print(":");
+  Serial.print(bssid[2],HEX);
+  Serial.print(":");
+  Serial.print(bssid[1],HEX);
+  Serial.print(":");
+  Serial.println(bssid[0],HEX);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal sgtrength (RSSI):");
+  Serial.println(rssi);
+
+  // print the encryption type:
+  byte encryption = WiFi.encryptionType();
+  Serial.print("Encryption Type:");
+  Serial.println(encryption,HEX);
+  Serial.println();
+}
+