From 278976a58738591c8471df256f78e7ec2f81a15d Mon Sep 17 00:00:00 2001 From: Cristian Maglie Date: Tue, 25 Oct 2011 14:33:13 +0200 Subject: [PATCH] Removed Wire lib for AVR --- hardware/sam/libraries/Wire/Wire.cpp | 270 ------------ hardware/sam/libraries/Wire/Wire.h | 69 ---- hardware/sam/libraries/Wire/utility/twi.c | 476 ---------------------- hardware/sam/libraries/Wire/utility/twi.h | 53 --- 4 files changed, 868 deletions(-) delete mode 100644 hardware/sam/libraries/Wire/Wire.cpp delete mode 100644 hardware/sam/libraries/Wire/Wire.h delete mode 100644 hardware/sam/libraries/Wire/utility/twi.c delete mode 100644 hardware/sam/libraries/Wire/utility/twi.h diff --git a/hardware/sam/libraries/Wire/Wire.cpp b/hardware/sam/libraries/Wire/Wire.cpp deleted file mode 100644 index 5818beef1..000000000 --- a/hardware/sam/libraries/Wire/Wire.cpp +++ /dev/null @@ -1,270 +0,0 @@ -/* - TwoWire.cpp - TWI/I2C library for Wiring & Arduino - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -extern "C" { - #include - #include - #include - #include "twi.h" -} - -#include "Wire.h" - -// Initialize Class Variables ////////////////////////////////////////////////// - -uint8_t TwoWire::rxBuffer[BUFFER_LENGTH]; -uint8_t TwoWire::rxBufferIndex = 0; -uint8_t TwoWire::rxBufferLength = 0; - -uint8_t TwoWire::txAddress = 0; -uint8_t TwoWire::txBuffer[BUFFER_LENGTH]; -uint8_t TwoWire::txBufferIndex = 0; -uint8_t TwoWire::txBufferLength = 0; - -uint8_t TwoWire::transmitting = 0; -void (*TwoWire::user_onRequest)(void); -void (*TwoWire::user_onReceive)(int); - -// Constructors //////////////////////////////////////////////////////////////// - -TwoWire::TwoWire() -{ -} - -// Public Methods ////////////////////////////////////////////////////////////// - -void TwoWire::begin(void) -{ - rxBufferIndex = 0; - rxBufferLength = 0; - - txBufferIndex = 0; - txBufferLength = 0; - - twi_init(); -} - -void TwoWire::begin(uint8_t address) -{ - twi_setAddress(address); - twi_attachSlaveTxEvent(onRequestService); - twi_attachSlaveRxEvent(onReceiveService); - begin(); -} - -void TwoWire::begin(int address) -{ - begin((uint8_t)address); -} - -uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity) -{ - // clamp to buffer length - if(quantity > BUFFER_LENGTH){ - quantity = BUFFER_LENGTH; - } - // perform blocking read into buffer - uint8_t read = twi_readFrom(address, rxBuffer, quantity); - // set rx buffer iterator vars - rxBufferIndex = 0; - rxBufferLength = read; - - return read; -} - -uint8_t TwoWire::requestFrom(int address, int quantity) -{ - return requestFrom((uint8_t)address, (uint8_t)quantity); -} - -void TwoWire::beginTransmission(uint8_t address) -{ - // indicate that we are transmitting - transmitting = 1; - // set address of targeted slave - txAddress = address; - // reset tx buffer iterator vars - txBufferIndex = 0; - txBufferLength = 0; -} - -void TwoWire::beginTransmission(int address) -{ - beginTransmission((uint8_t)address); -} - -uint8_t TwoWire::endTransmission(void) -{ - // transmit buffer (blocking) - int8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, 1); - // reset tx buffer iterator vars - txBufferIndex = 0; - txBufferLength = 0; - // indicate that we are done transmitting - transmitting = 0; - return ret; -} - -// must be called in: -// slave tx event callback -// or after beginTransmission(address) -void TwoWire::write(uint8_t data) -{ - if(transmitting){ - // in master transmitter mode - // don't bother if buffer is full - if(txBufferLength >= BUFFER_LENGTH){ - return; - } - // put byte in tx buffer - txBuffer[txBufferIndex] = data; - ++txBufferIndex; - // update amount in buffer - txBufferLength = txBufferIndex; - }else{ - // in slave send mode - // reply to master - twi_transmit(&data, 1); - } -} - -// must be called in: -// slave tx event callback -// or after beginTransmission(address) -void TwoWire::write(const uint8_t *data, size_t quantity) -{ - if(transmitting){ - // in master transmitter mode - for(size_t i = 0; i < quantity; ++i){ - write(data[i]); - } - }else{ - // in slave send mode - // reply to master - twi_transmit(data, quantity); - } -} - -// must be called in: -// slave tx event callback -// or after beginTransmission(address) -void TwoWire::write(const char *data) -{ - write((uint8_t*)data, strlen(data)); -} - -// must be called in: -// slave rx event callback -// or after requestFrom(address, numBytes) -int TwoWire::available(void) -{ - return rxBufferLength - rxBufferIndex; -} - -// must be called in: -// slave rx event callback -// or after requestFrom(address, numBytes) -int TwoWire::read(void) -{ - int value = -1; - - // get each successive byte on each call - if(rxBufferIndex < rxBufferLength){ - value = rxBuffer[rxBufferIndex]; - ++rxBufferIndex; - } - - return value; -} - -// must be called in: -// slave rx event callback -// or after requestFrom(address, numBytes) -int TwoWire::peek(void) -{ - int value = -1; - - if(rxBufferIndex < rxBufferLength){ - value = rxBuffer[rxBufferIndex]; - } - - return value; -} - -void TwoWire::flush(void) -{ - // XXX: to be implemented. -} - -// behind the scenes function that is called when data is received -void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes) -{ - // don't bother if user hasn't registered a callback - if(!user_onReceive){ - return; - } - // don't bother if rx buffer is in use by a master requestFrom() op - // i know this drops data, but it allows for slight stupidity - // meaning, they may not have read all the master requestFrom() data yet - if(rxBufferIndex < rxBufferLength){ - return; - } - // copy twi rx buffer into local read buffer - // this enables new reads to happen in parallel - for(uint8_t i = 0; i < numBytes; ++i){ - rxBuffer[i] = inBytes[i]; - } - // set rx iterator vars - rxBufferIndex = 0; - rxBufferLength = numBytes; - // alert user program - user_onReceive(numBytes); -} - -// behind the scenes function that is called when data is requested -void TwoWire::onRequestService(void) -{ - // don't bother if user hasn't registered a callback - if(!user_onRequest){ - return; - } - // reset tx buffer iterator vars - // !!! this will kill any pending pre-master sendTo() activity - txBufferIndex = 0; - txBufferLength = 0; - // alert user program - user_onRequest(); -} - -// sets function called on slave write -void TwoWire::onReceive( void (*function)(int) ) -{ - user_onReceive = function; -} - -// sets function called on slave read -void TwoWire::onRequest( void (*function)(void) ) -{ - user_onRequest = function; -} - -// Preinstantiate Objects ////////////////////////////////////////////////////// - -TwoWire Wire = TwoWire(); - diff --git a/hardware/sam/libraries/Wire/Wire.h b/hardware/sam/libraries/Wire/Wire.h deleted file mode 100644 index 51df04e97..000000000 --- a/hardware/sam/libraries/Wire/Wire.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - TwoWire.h - TWI/I2C library for Arduino & Wiring - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef TwoWire_h -#define TwoWire_h - -#include -#include "Stream.h" - -#define BUFFER_LENGTH 32 - -class TwoWire : public Stream -{ - private: - static uint8_t rxBuffer[]; - static uint8_t rxBufferIndex; - static uint8_t rxBufferLength; - - static uint8_t txAddress; - static uint8_t txBuffer[]; - static uint8_t txBufferIndex; - static uint8_t txBufferLength; - - static uint8_t transmitting; - static void (*user_onRequest)(void); - static void (*user_onReceive)(int); - static void onRequestService(void); - static void onReceiveService(uint8_t*, int); - public: - TwoWire(); - void begin(); - void begin(uint8_t); - void begin(int); - void beginTransmission(uint8_t); - void beginTransmission(int); - uint8_t endTransmission(void); - uint8_t requestFrom(uint8_t, uint8_t); - uint8_t requestFrom(int, int); - virtual void write(uint8_t); - virtual void write(const char *); - virtual void write(const uint8_t *, size_t); - virtual int available(void); - virtual int read(void); - virtual int peek(void); - virtual void flush(void); - void onReceive( void (*)(int) ); - void onRequest( void (*)(void) ); -}; - -extern TwoWire Wire; - -#endif - diff --git a/hardware/sam/libraries/Wire/utility/twi.c b/hardware/sam/libraries/Wire/utility/twi.c deleted file mode 100644 index cef8373a8..000000000 --- a/hardware/sam/libraries/Wire/utility/twi.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - twi.c - TWI/I2C library for Wiring & Arduino - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include -#include -#include -#include -#include -#include - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif - -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -#include "twi.h" - -static volatile uint8_t twi_state; -static uint8_t twi_slarw; - -static void (*twi_onSlaveTransmit)(void); -static void (*twi_onSlaveReceive)(uint8_t*, int); - -static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH]; -static volatile uint8_t twi_masterBufferIndex; -static uint8_t twi_masterBufferLength; - -static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH]; -static volatile uint8_t twi_txBufferIndex; -static volatile uint8_t twi_txBufferLength; - -static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH]; -static volatile uint8_t twi_rxBufferIndex; - -static volatile uint8_t twi_error; - -/* - * Function twi_init - * Desc readys twi pins and sets twi bitrate - * Input none - * Output none - */ -void twi_init(void) -{ - // initialize state - twi_state = TWI_READY; - - #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) - // activate internal pull-ups for twi - // as per note from atmega8 manual pg167 - sbi(PORTC, 4); - sbi(PORTC, 5); - #else - // activate internal pull-ups for twi - // as per note from atmega128 manual pg204 - sbi(PORTD, 0); - sbi(PORTD, 1); - #endif - - // initialize twi prescaler and bit rate - cbi(TWSR, TWPS0); - cbi(TWSR, TWPS1); - TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; - - /* twi bit rate formula from atmega128 manual pg 204 - SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR)) - note: TWBR should be 10 or higher for master mode - It is 72 for a 16mhz Wiring board with 100kHz TWI */ - - // enable twi module, acks, and twi interrupt - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA); -} - -/* - * Function twi_slaveInit - * Desc sets slave address and enables interrupt - * Input none - * Output none - */ -void twi_setAddress(uint8_t address) -{ - // set twi slave address (skip over TWGCE bit) - TWAR = address << 1; -} - -/* - * Function twi_readFrom - * Desc attempts to become twi bus master and read a - * series of bytes from a device on the bus - * Input address: 7bit i2c device address - * data: pointer to byte array - * length: number of bytes to read into array - * Output number of bytes read - */ -uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length) -{ - uint8_t i; - - // ensure data will fit into buffer - if(TWI_BUFFER_LENGTH < length){ - return 0; - } - - // wait until twi is ready, become master receiver - while(TWI_READY != twi_state){ - continue; - } - twi_state = TWI_MRX; - // reset error state (0xFF.. no error occured) - twi_error = 0xFF; - - // initialize buffer iteration vars - twi_masterBufferIndex = 0; - twi_masterBufferLength = length-1; // This is not intuitive, read on... - // On receive, the previously configured ACK/NACK setting is transmitted in - // response to the received byte before the interrupt is signalled. - // Therefor we must actually set NACK when the _next_ to last byte is - // received, causing that NACK to be sent in response to receiving the last - // expected byte of data. - - // build sla+w, slave device address + w bit - twi_slarw = TW_READ; - twi_slarw |= address << 1; - - // send start condition - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA); - - // wait for read operation to complete - while(TWI_MRX == twi_state){ - continue; - } - - if (twi_masterBufferIndex < length) - length = twi_masterBufferIndex; - - // copy twi buffer to data - for(i = 0; i < length; ++i){ - data[i] = twi_masterBuffer[i]; - } - - return length; -} - -/* - * Function twi_writeTo - * Desc attempts to become twi bus master and write a - * series of bytes to a device on the bus - * Input address: 7bit i2c device address - * data: pointer to byte array - * length: number of bytes in array - * wait: boolean indicating to wait for write or not - * Output 0 .. success - * 1 .. length to long for buffer - * 2 .. address send, NACK received - * 3 .. data send, NACK received - * 4 .. other twi error (lost bus arbitration, bus error, ..) - */ -uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait) -{ - uint8_t i; - - // ensure data will fit into buffer - if(TWI_BUFFER_LENGTH < length){ - return 1; - } - - // wait until twi is ready, become master transmitter - while(TWI_READY != twi_state){ - continue; - } - twi_state = TWI_MTX; - // reset error state (0xFF.. no error occured) - twi_error = 0xFF; - - // initialize buffer iteration vars - twi_masterBufferIndex = 0; - twi_masterBufferLength = length; - - // copy data to twi buffer - for(i = 0; i < length; ++i){ - twi_masterBuffer[i] = data[i]; - } - - // build sla+w, slave device address + w bit - twi_slarw = TW_WRITE; - twi_slarw |= address << 1; - - // send start condition - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA); - - // wait for write operation to complete - while(wait && (TWI_MTX == twi_state)){ - continue; - } - - if (twi_error == 0xFF) - return 0; // success - else if (twi_error == TW_MT_SLA_NACK) - return 2; // error: address send, nack received - else if (twi_error == TW_MT_DATA_NACK) - return 3; // error: data send, nack received - else - return 4; // other twi error -} - -/* - * Function twi_transmit - * Desc fills slave tx buffer with data - * must be called in slave tx event callback - * Input data: pointer to byte array - * length: number of bytes in array - * Output 1 length too long for buffer - * 2 not slave transmitter - * 0 ok - */ -uint8_t twi_transmit(const uint8_t* data, uint8_t length) -{ - uint8_t i; - - // ensure data will fit into buffer - if(TWI_BUFFER_LENGTH < length){ - return 1; - } - - // ensure we are currently a slave transmitter - if(TWI_STX != twi_state){ - return 2; - } - - // set length and copy data into tx buffer - twi_txBufferLength = length; - for(i = 0; i < length; ++i){ - twi_txBuffer[i] = data[i]; - } - - return 0; -} - -/* - * Function twi_attachSlaveRxEvent - * Desc sets function called before a slave read operation - * Input function: callback function to use - * Output none - */ -void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) ) -{ - twi_onSlaveReceive = function; -} - -/* - * Function twi_attachSlaveTxEvent - * Desc sets function called before a slave write operation - * Input function: callback function to use - * Output none - */ -void twi_attachSlaveTxEvent( void (*function)(void) ) -{ - twi_onSlaveTransmit = function; -} - -/* - * Function twi_reply - * Desc sends byte or readys receive line - * Input ack: byte indicating to ack or to nack - * Output none - */ -void twi_reply(uint8_t ack) -{ - // transmit master read ready signal, with or without ack - if(ack){ - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA); - }else{ - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT); - } -} - -/* - * Function twi_stop - * Desc relinquishes bus master status - * Input none - * Output none - */ -void twi_stop(void) -{ - // send stop condition - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO); - - // wait for stop condition to be exectued on bus - // TWINT is not set after a stop condition! - while(TWCR & _BV(TWSTO)){ - continue; - } - - // update twi state - twi_state = TWI_READY; -} - -/* - * Function twi_releaseBus - * Desc releases bus control - * Input none - * Output none - */ -void twi_releaseBus(void) -{ - // release bus - TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT); - - // update twi state - twi_state = TWI_READY; -} - -SIGNAL(TWI_vect) -{ - switch(TW_STATUS){ - // All Master - case TW_START: // sent start condition - case TW_REP_START: // sent repeated start condition - // copy device address and r/w bit to output register and ack - TWDR = twi_slarw; - twi_reply(1); - break; - - // Master Transmitter - case TW_MT_SLA_ACK: // slave receiver acked address - case TW_MT_DATA_ACK: // slave receiver acked data - // if there is data to send, send it, otherwise stop - if(twi_masterBufferIndex < twi_masterBufferLength){ - // copy data to output register and ack - TWDR = twi_masterBuffer[twi_masterBufferIndex++]; - twi_reply(1); - }else{ - twi_stop(); - } - break; - case TW_MT_SLA_NACK: // address sent, nack received - twi_error = TW_MT_SLA_NACK; - twi_stop(); - break; - case TW_MT_DATA_NACK: // data sent, nack received - twi_error = TW_MT_DATA_NACK; - twi_stop(); - break; - case TW_MT_ARB_LOST: // lost bus arbitration - twi_error = TW_MT_ARB_LOST; - twi_releaseBus(); - break; - - // Master Receiver - case TW_MR_DATA_ACK: // data received, ack sent - // put byte into buffer - twi_masterBuffer[twi_masterBufferIndex++] = TWDR; - case TW_MR_SLA_ACK: // address sent, ack received - // ack if more bytes are expected, otherwise nack - if(twi_masterBufferIndex < twi_masterBufferLength){ - twi_reply(1); - }else{ - twi_reply(0); - } - break; - case TW_MR_DATA_NACK: // data received, nack sent - // put final byte into buffer - twi_masterBuffer[twi_masterBufferIndex++] = TWDR; - case TW_MR_SLA_NACK: // address sent, nack received - twi_stop(); - break; - // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case - - // Slave Receiver - case TW_SR_SLA_ACK: // addressed, returned ack - case TW_SR_GCALL_ACK: // addressed generally, returned ack - case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack - case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack - // enter slave receiver mode - twi_state = TWI_SRX; - // indicate that rx buffer can be overwritten and ack - twi_rxBufferIndex = 0; - twi_reply(1); - break; - case TW_SR_DATA_ACK: // data received, returned ack - case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack - // if there is still room in the rx buffer - if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ - // put byte in buffer and ack - twi_rxBuffer[twi_rxBufferIndex++] = TWDR; - twi_reply(1); - }else{ - // otherwise nack - twi_reply(0); - } - break; - case TW_SR_STOP: // stop or repeated start condition received - // put a null char after data if there's room - if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ - twi_rxBuffer[twi_rxBufferIndex] = '\0'; - } - // sends ack and stops interface for clock stretching - twi_stop(); - // callback to user defined callback - twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex); - // since we submit rx buffer to "wire" library, we can reset it - twi_rxBufferIndex = 0; - // ack future responses and leave slave receiver state - twi_releaseBus(); - break; - case TW_SR_DATA_NACK: // data received, returned nack - case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack - // nack back at master - twi_reply(0); - break; - - // Slave Transmitter - case TW_ST_SLA_ACK: // addressed, returned ack - case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack - // enter slave transmitter mode - twi_state = TWI_STX; - // ready the tx buffer index for iteration - twi_txBufferIndex = 0; - // set tx buffer length to be zero, to verify if user changes it - twi_txBufferLength = 0; - // request for txBuffer to be filled and length to be set - // note: user must call twi_transmit(bytes, length) to do this - twi_onSlaveTransmit(); - // if they didn't change buffer & length, initialize it - if(0 == twi_txBufferLength){ - twi_txBufferLength = 1; - twi_txBuffer[0] = 0x00; - } - // transmit first byte from buffer, fall - case TW_ST_DATA_ACK: // byte sent, ack returned - // copy data to output register - TWDR = twi_txBuffer[twi_txBufferIndex++]; - // if there is more to send, ack, otherwise nack - if(twi_txBufferIndex < twi_txBufferLength){ - twi_reply(1); - }else{ - twi_reply(0); - } - break; - case TW_ST_DATA_NACK: // received nack, we are done - case TW_ST_LAST_DATA: // received ack, but we are done already! - // ack future responses - twi_reply(1); - // leave slave receiver state - twi_state = TWI_READY; - break; - - // All - case TW_NO_INFO: // no state information - break; - case TW_BUS_ERROR: // bus error, illegal stop/start - twi_error = TW_BUS_ERROR; - twi_stop(); - break; - } -} - diff --git a/hardware/sam/libraries/Wire/utility/twi.h b/hardware/sam/libraries/Wire/utility/twi.h deleted file mode 100644 index 831b9282a..000000000 --- a/hardware/sam/libraries/Wire/utility/twi.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - twi.h - TWI/I2C library for Wiring & Arduino - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef twi_h -#define twi_h - - #include - - //#define ATMEGA8 - - #ifndef TWI_FREQ - #define TWI_FREQ 100000L - #endif - - #ifndef TWI_BUFFER_LENGTH - #define TWI_BUFFER_LENGTH 32 - #endif - - #define TWI_READY 0 - #define TWI_MRX 1 - #define TWI_MTX 2 - #define TWI_SRX 3 - #define TWI_STX 4 - - void twi_init(void); - void twi_setAddress(uint8_t); - uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t); - uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t); - uint8_t twi_transmit(const uint8_t*, uint8_t); - void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) ); - void twi_attachSlaveTxEvent( void (*)(void) ); - void twi_reply(uint8_t); - void twi_stop(void); - void twi_releaseBus(void); - -#endif -