Corrected the style

build/shared/dist/examples/Digital/Loop/Loop.pde

@@ -1,37 +0,0 @@
-/*
- * Loop
- * by David A. Mellis
- *
- * Lights multiple LEDs in sequence, then in reverse.  Demonstrates
- * the use of a for() loop and arrays.
- *
- * http://www.arduino.cc/en/Tutorial/Loop
- */
-
-int timer = 100;                   // The higher the number, the slower the timing.
-int pins[] = { 2, 3, 4, 5, 6, 7 }; // an array of pin numbers
-int num_pins = 6;                  // the number of pins (i.e. the length of the array)
-
-void setup()
-{
-  int i;
-
-  for (i = 0; i < num_pins; i++)   // the array elements are numbered from 0 to num_pins - 1
-    pinMode(pins[i], OUTPUT);      // set each pin as an output
-}
-
-void loop()
-{
-  int i;
-  
-  for (i = 0; i < num_pins; i++) { // loop through each pin...
-    digitalWrite(pins[i], HIGH);   // turning it on,
-    delay(timer);                  // pausing,
-    digitalWrite(pins[i], LOW);    // and turning it off.
-  }
-  for (i = num_pins - 1; i >= 0; i--) { 
-    digitalWrite(pins[i], HIGH);
-    delay(timer);
-    digitalWrite(pins[i], LOW);
-  }
-}