introducing Temboo library

hardware/arduino/avr/libraries/Temboo/Temboo.cpp

@@ -0,0 +1,64 @@
+/*
+###############################################################################
+#
+# Temboo Arduino Yun library
+#
+# Copyright 2013, Temboo Inc.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+# http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
+# either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+#
+###############################################################################
+*/
+
+#include <Temboo.h>
+
+void TembooChoreo::begin() {
+    Process::begin("temboo");
+}
+
+void TembooChoreo::setAccountName(const String& accountName) {
+    addParameter("-a" + accountName);
+}
+
+void TembooChoreo::setAppKeyName(const String& appKeyName) {
+    addParameter("-u" + appKeyName);
+}
+
+void TembooChoreo::setAppKey(const String& appKey) {
+    addParameter("-p" + appKey);
+}
+
+void TembooChoreo::setChoreo(const String& choreo) {
+    addParameter("-c" + choreo);
+}
+
+void TembooChoreo::setCredential(const String& credentialName) {
+    addParameter("-e" + credentialName);
+}
+
+void TembooChoreo::addInput(const String& inputName, const String& inputValue) {
+    addParameter("-i" + inputName + ":" + inputValue);
+}
+
+void TembooChoreo::addOutputFilter(const String& outputName, const String& filterPath, const String& variableName) {
+    addParameter("-o" + outputName + ":" + filterPath + ":" + variableName);
+}
+
+void TembooChoreo::setSettingsFileToWrite(const String& filePath) {
+    addParameter("-w" + filePath);
+}
+
+void TembooChoreo::setSettingsFileToRead(const String& filePath) {
+    addParameter("-r" + filePath);
+}
+

hardware/arduino/avr/libraries/Temboo/Temboo.h

@@ -0,0 +1,44 @@
+/*
+###############################################################################
+#
+# Temboo Arduino Yun library
+#
+# Copyright 2013, Temboo Inc.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+# http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
+# either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+#
+###############################################################################
+*/
+
+#ifndef _TEMBOO_H
+#define _TEMBOO_H
+#include <Arduino.h>
+#include <Process.h>
+
+class TembooChoreo : public Process {
+
+    public:
+        void begin();
+        void setAccountName(const String& accountName);
+        void setAppKeyName(const String& appKeyName);
+        void setAppKey(const String& appKey);
+        void setChoreo(const String& choreo);
+        void setCredential(const String& credentialName);
+        void addInput(const String& inputName, const String& inputValue);
+        void addOutputFilter(const String& filterName, const String& filterPath, const String& variableName);
+        void setSettingsFileToWrite(const String& filePath);
+        void setSettingsFileToRead(const String& filePath);
+
+};
+
+#endif 

hardware/arduino/avr/libraries/Temboo/examples/GetYahooWeatherReport/GetYahooWeatherReport.ino

@@ -0,0 +1,115 @@
+/*
+  GetYahooWeatherReport
+  
+  Demonstrates making a request to the Yahoo! Weather API using the Temboo Arduino Yun SDK.
+
+  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+  
+  A Temboo account and application key are necessary to run all Temboo examples. 
+  If you don't already have one, you can register for a free Temboo account at 
+  http://www.temboo.com
+  
+  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+  to the Internet.
+
+  Looking for another API? We've got over 100 in our Library!
+  
+  This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+                           // as described in the footer comment below
+
+
+// the address for which a weather forecast will be retrieved
+String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013";
+
+int numRuns = 1;   // execution count, so that this doesn't run forever
+int maxRuns = 10;  // max number of times the Yahoo WeatherByAddress Choreo should be run
+
+
+void setup() {
+  Serial.begin(9600);
+    
+  // for debugging, wait until a serial console is connected
+  delay(4000);
+  while(!Serial);
+  Bridge.begin();
+
+}
+
+void loop()
+{
+  // while we haven't reached the max number of runs...
+  if (numRuns <= maxRuns) {
+      
+    // print status
+    Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "...");
+
+    // create a TembooChoreo object to send a Choreo request to Temboo
+    TembooChoreo GetWeatherByAddressChoreo;
+    
+    // invoke the Temboo client
+    GetWeatherByAddressChoreo.begin();
+
+    // add your temboo account info
+    GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT);
+    GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+    GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY);
+    
+    // set the name of the choreo we want to run
+    GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress");
+    
+    // set choreo inputs; in this case, the address for which to retrieve weather data
+    // the Temboo client provides standardized calls to 100+ cloud APIs
+    GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST);
+
+    // add an output filter to extract the name of the city.
+    GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response");
+    
+    // add an output filter to extract the current temperature
+    GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response");
+
+    // add an output filter to extract the date and time of the last report.
+    GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response");
+
+    // run the choreo 
+    GetWeatherByAddressChoreo.run();
+        
+    // when the choreo results are available, print them to the serial monitor
+    while(GetWeatherByAddressChoreo.available()) {
+          
+      char c = GetWeatherByAddressChoreo.read();    
+      Serial.print(c);
+    }
+    GetWeatherByAddressChoreo.close();
+
+  }
+
+  Serial.println("Waiting...");
+  Serial.println("");
+  delay(30000); // wait 30 seconds between GetWeatherByAddress calls
+}
+
+/*
+  IMPORTANT NOTE: TembooAccount.h:
+
+  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+  by inserting your own Temboo account name and app key information. The contents of the file should
+  look like:
+
+  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
+  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
+  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
+
+  You can find your Temboo App Key information on the Temboo website, 
+  under My Account > Application Keys
+
+  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+  Keeping your account information in a separate file means you can save it once, 
+  then just distribute the main .ino file without worrying that you forgot to delete your credentials.
+*/

hardware/arduino/avr/libraries/Temboo/examples/GetYahooWeatherReport/TembooAccount.h

@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
+#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
+#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
+