diff --git a/hardware/arduino/avr/variants/ethernet/pins_arduino.h b/hardware/arduino/avr/variants/ethernet/pins_arduino.h index 967669822..b7030d0e2 100644 --- a/hardware/arduino/avr/variants/ethernet/pins_arduino.h +++ b/hardware/arduino/avr/variants/ethernet/pins_arduino.h @@ -215,4 +215,22 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { #endif +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_HARDWARE Serial +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + #endif diff --git a/hardware/arduino/avr/variants/leonardo/pins_arduino.h b/hardware/arduino/avr/variants/leonardo/pins_arduino.h index d74683272..fd75373c1 100644 --- a/hardware/arduino/avr/variants/leonardo/pins_arduino.h +++ b/hardware/arduino/avr/variants/leonardo/pins_arduino.h @@ -337,4 +337,25 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + #endif /* Pins_Arduino_h */ diff --git a/hardware/arduino/avr/variants/mega/pins_arduino.h b/hardware/arduino/avr/variants/mega/pins_arduino.h index 3cdbb7926..a80991b3c 100644 --- a/hardware/arduino/avr/variants/mega/pins_arduino.h +++ b/hardware/arduino/avr/variants/mega/pins_arduino.h @@ -362,4 +362,28 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { #endif +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial +#define SERIAL_PORT_HARDWARE1 Serial1 +#define SERIAL_PORT_HARDWARE2 Serial2 +#define SERIAL_PORT_HARDWARE3 Serial3 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 +#define SERIAL_PORT_HARDWARE_OPEN1 Serial2 +#define SERIAL_PORT_HARDWARE_OPEN2 Serial3 + #endif diff --git a/hardware/arduino/avr/variants/robot_control/pins_arduino.h b/hardware/arduino/avr/variants/robot_control/pins_arduino.h index 979f3ebfc..b868064ea 100644 --- a/hardware/arduino/avr/variants/robot_control/pins_arduino.h +++ b/hardware/arduino/avr/variants/robot_control/pins_arduino.h @@ -280,4 +280,24 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 + #endif /* Pins_Arduino_h */ diff --git a/hardware/arduino/avr/variants/robot_motor/pins_arduino.h b/hardware/arduino/avr/variants/robot_motor/pins_arduino.h index 8179ac305..7dc4a79b0 100644 --- a/hardware/arduino/avr/variants/robot_motor/pins_arduino.h +++ b/hardware/arduino/avr/variants/robot_motor/pins_arduino.h @@ -275,4 +275,24 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 + #endif /* Pins_Arduino_h */ diff --git a/hardware/arduino/avr/variants/standard/pins_arduino.h b/hardware/arduino/avr/variants/standard/pins_arduino.h index 815df3c3b..3d4a9f6c7 100644 --- a/hardware/arduino/avr/variants/standard/pins_arduino.h +++ b/hardware/arduino/avr/variants/standard/pins_arduino.h @@ -217,4 +217,22 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { #endif +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial + #endif