diff --git a/hardware/arduino/avr/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino b/hardware/arduino/avr/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino
deleted file mode 100644
index 7833d5498..000000000
--- a/hardware/arduino/avr/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino
+++ /dev/null
@@ -1,90 +0,0 @@
-
-/*
-  Arduino Yun Boot watcher
- 
- Allows you to use the Yun's 32U4 processor as a
- serial terminal for the linino processor
- 
- Upload this to an Arduino Yun via serial (not WiFi) 
- then open the serial monitor at 115200 to see the boot process
- of the linino processor. You can also use the serial monitor
- as a basic command line interface for the linino processor using 
- this sketch.
- 
- The circuit:
- * Arduino Yun
- 
- created March 2013
- by Massimo Banzi
- modified 26 May 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- */
-
-long baud = 115200;
-
-// Pin 13 has an LED connected on most Arduino boards.
-// give it a name:
-int led = 13;
-int ledState = HIGH;   // whether the LED is high or low      
-
-String bootString = "";
-int bootLineCount = 0;
-boolean booting = true;
-
-void setup() {
-  Serial.begin(baud);        // open serial connection to Linino
-  Serial1.begin(baud);       // open serial connection via USB-Serial
-
-  // initialize the digital pin as an output.
-  pinMode(led, OUTPUT);    
-  digitalWrite(led, ledState);   // turn the LED on (HIGH is the voltage level)
-  while(booting) {
-    listenForBoot();
-  }
-  delay(500);
-}
-
-
-void loop() {
-  // After booting, become a serial terminal:
-  if (Serial.available()) {           // got anything from USB-Serial?
-    char c = (char)Serial.read();     // read from USB-serial
-    Serial1.write(c);                 // write to Linino
-    ledState=!ledState;               // invert LED state
-    digitalWrite(led, ledState);      // toggle the LED
-  }
-  if (Serial1.available()) {          // got anything from Linino?         
-    char c = (char)Serial1.read();    // read from Linino  
-    Serial.write(c);                  // write to USB-serial
-  }
-
-}
-
-void listenForBoot() {
-  char c;
-  if (Serial1.available()) {     // got anything from Linino?         
-    c = (char)Serial1.read();    // read from Linino  
-    
-    if (c == '\n') {             // clear the bootString every newline
-      bootLineCount++;                // increment the boot line counter
-      Serial.println(bootLineCount);  // print the count
-      bootString = "";           // clear the boot string
-    } 
-    else {                       // anything other than newline, add to string
-      bootString += c;
-    }
-  }
-
-  // look for the final boot string message:
-  if (bootString.endsWith("entered forwarding state")) {
-    Serial1.println(); 
-  }
-
-  // look for the command prompt:
-  if (bootString.endsWith(":/#")) {
-    Serial.println("Ready for action.");
-    booting = false;
-  }
-}
diff --git a/hardware/arduino/avr/libraries/Bridge/examples/Bridge/Bridge.ino b/hardware/arduino/avr/libraries/Bridge/examples/Bridge/Bridge.ino
index c7627b219..eceab07c1 100644
--- a/hardware/arduino/avr/libraries/Bridge/examples/Bridge/Bridge.ino
+++ b/hardware/arduino/avr/libraries/Bridge/examples/Bridge/Bridge.ino
@@ -1,150 +1,174 @@
 
-//#include <Bridge.h>
-#include <Mailbox.h>
+// Possible commands are listed here:
+//
+// "digital/13"     -> digitalRead(13)
+// "digital/13/1"   -> digitalWrite(13, HIGH)
+// "analog/2/123"   -> analogWrite(2, 123)
+// "analog/2"       -> analogRead(2)
+// "mode/13/input"  -> pinMode(13, INPUT)
+// "mode/13/output" -> pinMode(13, OUTPUT)
+
+#include <Bridge.h>
+#include <YunServer.h>
+
+// Listen on default port 5555, the webserver on the Yun
+// will forward there all the HTTP requests for us.
+YunServer server;
 
 void setup() {
+  Serial.begin(9600);
+
+  // Bridge startup
   pinMode(13,OUTPUT);
   digitalWrite(13, LOW);
   Bridge.begin();
   digitalWrite(13, HIGH);
-  Serial.begin(9600);
+
+  // Listen for incoming connection only from localhost
+  // (no one from the external network could connect)
+  server.listenOnLocalhost();
+  server.begin();
 }
 
 void loop() {
-  while (Mailbox.messageAvailable()) {
-    String msg;
-    Mailbox.readMessage(msg);
-    process(msg);
+  // Get clients coming from server
+  YunClient client = server.accept();
+
+  // There is a new client?
+  if (client) {
+    // Process request
+    process(client);
+
+    // Close connection and free resources.
+    client.stop();
   }
-  delay(100); // Poll every 0.100s
+
+  delay(50); // Poll every 50ms
 }
 
-void process(String command) {
-  Serial.println(command);
-  // "digital/13"     -> digitalRead(13)
-  // "digital/13/1"   -> digitalWrite(13, HIGH)
-  // "analog/2/123"   -> analogWrite(2, 123)
-  // "analog/2"       -> analogRead(2)
-  // "mode/13/input"  -> pinMode(13, INPUT)
-  // "mode/13/output" -> pinMode(13, OUTPUT)
+void process(YunClient client) {
+  // read the command
+  String command = client.readStringUntil('/');
 
-  // is digital command?
-  if (command.startsWith("digital/")) {
-    // extract subcommand (after the "/")
-    command = command.substring(8);
-    digitalCommand(command);
+  // is "digital" command?
+  if (command == "digital") {
+    digitalCommand(client);
+  }
 
-  } 
-  // is analog command?
-  else if (command.startsWith("analog/")) {
-    // extract subcommand (after the "/")
-    command = command.substring(7);
-    analogCommand(command);
+  // is "analog" command?
+  if (command == "analog") {
+    analogCommand(client);
+  }
 
-  } 
-  // is mode command?
-  else if (command.startsWith("mode/")) {
-    // extract subcommand (after the "/")
-    command = command.substring(5);
-    modeCommand(command);
+  // is "mode" command?
+  if (command == "mode") {
+    modeCommand(client);
   }
 }
 
-void digitalCommand(String command) {
+void digitalCommand(YunClient client) {
   int pin, value;
 
-  // Find the position of the "/" inside the command
-  int slashIndex = command.indexOf("/");
+  // Read pin number
+  pin = client.parseInt();
 
-  // If there are no slashes
-  if (slashIndex == -1) {
-    // then we are in the following case:
-    // "digital/13"     -> digitalRead(13)
-
-    // so we can extract the pin number from the remainder of the command string
-    pin = command.toInt();
-  } 
-  else {
-    // else, we found a slash, so we are in the following case:
-    // "digital/13/1"   -> digitalWrite(13, HIGH)
-    
-    // we must estract pin number before the "/"
-    pin = command.substring(0, slashIndex).toInt();
-    // and value after the "/"
-    value = command.substring(slashIndex+1).toInt();
+  // If the next character is a '/' it means we have an URL
+  // with a value like: "/digital/13/1"
+  if (client.read() == '/') {
+    value = client.parseInt();
     digitalWrite(pin, value);
-  }
-  reportDigitalRead(pin, true);
-}
-
-void analogCommand(String command) {
-  int pin, value;
-  if (command.indexOf("/") != -1) {
-    pin = command.substring(0, command.indexOf("/")).toInt();
-    value = command.substring(command.indexOf("/") + 1, command.length()).toInt();
-    analogWrite(pin, value);
   } 
   else {
-    pin = command.toInt();
+    value = digitalRead(pin);
   }
-  reportAnalogRead(pin, true);
+
+  // Send feedback to client
+  client.print(F("Pin D"));
+  client.print(pin);
+  client.print(F(" set to "));
+  client.println(value);
+
+  // Update datastore key with the current pin value
+  String key = "D";
+  key += pin;
+  Bridge.put(key, String(value));
 }
 
-void modeCommand(String command) {
-  int pin;
-  String strValue;
-  pin = command.substring(0, command.indexOf("/")).toInt();
-  strValue = command.substring(command.indexOf("/") + 1, command.length());
-  if (strValue == "output") {
-    pinMode(pin, OUTPUT);
-    reportPinMode(pin, strValue);
-  } 
-  else if (strValue == "input") {
-    pinMode(pin, INPUT);
-    reportPinMode(pin, strValue);
-  }
-}
+void analogCommand(YunClient client) {
+  int pin, value;
 
-void reportPinMode(int pin, String mode) {
-  String json = "{\"pin\":";
-  json += pin;
-  json += ", \"mode\": \"";
-  json += mode;
-  json += "\"}";
-  Mailbox.writeJSON(json);
-}
+  // Read pin number
+  pin = client.parseInt();
 
-void reportDigitalRead(int pin, boolean dataset) {
-  int value = digitalRead(pin);
+  // If the next character is a '/' it means we have an URL
+  // with a value like: "/analog/5/120"
+  if (client.read() == '/') {
+    // Read value and execute command
+    value = client.parseInt();
+    analogWrite(pin, value);
 
-  String json = "{\"pin\":";
-  json += pin;
-  json += ", \"value\": ";
-  json += value;
-  json += "}";
-  Mailbox.writeJSON(json);
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" set to analog "));
+    client.println(value);
 
-  if (dataset) {
+    // Update datastore key with the current pin value
     String key = "D";
     key += pin;
-    Bridge.put(key.c_str(), String(value).c_str());
+    Bridge.put(key, String(value));
   }
-}
+  else {
+    // Read analog pin
+    value = analogRead(pin);
 
-void reportAnalogRead(int pin, boolean dataset) {
-  int value = analogRead(pin);
+    // Send feedback to client
+    client.print(F("Pin A"));
+    client.print(pin);
+    client.print(F(" reads analog "));
+    client.println(value);
 
-  String json = "{\"pin\":";
-  json += pin;
-  json += ", \"value\": ";
-  json += value;
-  json += "}";
-  Mailbox.writeJSON(json);
-
-  if (dataset) {
+    // Update datastore key with the current pin value
     String key = "A";
     key += pin;
-    Bridge.put(key.c_str(), String(value).c_str());
+    Bridge.put(key, String(value));
   }
 }
 
+void modeCommand(YunClient client) {
+  int pin;
+
+  // Read pin number
+  pin = client.parseInt();
+
+  // If the next character is not a '/' we have a malformed URL
+  if (client.read() != '/') {
+    client.println(F("error"));
+    return;
+  }
+
+  String mode = client.readStringUntil('\r');
+
+  if (mode == "input") {
+    pinMode(pin, INPUT);
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" configured as INPUT!"));
+    return;
+  }
+
+  if (mode == "output") {
+    pinMode(pin, OUTPUT);
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" configured as OUTPUT!"));
+    return;
+  }
+
+  client.print(F("error: invalid mode "));
+  client.print(mode);
+}
+
+
diff --git a/hardware/arduino/avr/libraries/Bridge/examples/BridgeNew/BridgeNew.ino b/hardware/arduino/avr/libraries/Bridge/examples/BridgeNew/BridgeNew.ino
deleted file mode 100644
index eceab07c1..000000000
--- a/hardware/arduino/avr/libraries/Bridge/examples/BridgeNew/BridgeNew.ino
+++ /dev/null
@@ -1,174 +0,0 @@
-
-// Possible commands are listed here:
-//
-// "digital/13"     -> digitalRead(13)
-// "digital/13/1"   -> digitalWrite(13, HIGH)
-// "analog/2/123"   -> analogWrite(2, 123)
-// "analog/2"       -> analogRead(2)
-// "mode/13/input"  -> pinMode(13, INPUT)
-// "mode/13/output" -> pinMode(13, OUTPUT)
-
-#include <Bridge.h>
-#include <YunServer.h>
-
-// Listen on default port 5555, the webserver on the Yun
-// will forward there all the HTTP requests for us.
-YunServer server;
-
-void setup() {
-  Serial.begin(9600);
-
-  // Bridge startup
-  pinMode(13,OUTPUT);
-  digitalWrite(13, LOW);
-  Bridge.begin();
-  digitalWrite(13, HIGH);
-
-  // Listen for incoming connection only from localhost
-  // (no one from the external network could connect)
-  server.listenOnLocalhost();
-  server.begin();
-}
-
-void loop() {
-  // Get clients coming from server
-  YunClient client = server.accept();
-
-  // There is a new client?
-  if (client) {
-    // Process request
-    process(client);
-
-    // Close connection and free resources.
-    client.stop();
-  }
-
-  delay(50); // Poll every 50ms
-}
-
-void process(YunClient client) {
-  // read the command
-  String command = client.readStringUntil('/');
-
-  // is "digital" command?
-  if (command == "digital") {
-    digitalCommand(client);
-  }
-
-  // is "analog" command?
-  if (command == "analog") {
-    analogCommand(client);
-  }
-
-  // is "mode" command?
-  if (command == "mode") {
-    modeCommand(client);
-  }
-}
-
-void digitalCommand(YunClient client) {
-  int pin, value;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is a '/' it means we have an URL
-  // with a value like: "/digital/13/1"
-  if (client.read() == '/') {
-    value = client.parseInt();
-    digitalWrite(pin, value);
-  } 
-  else {
-    value = digitalRead(pin);
-  }
-
-  // Send feedback to client
-  client.print(F("Pin D"));
-  client.print(pin);
-  client.print(F(" set to "));
-  client.println(value);
-
-  // Update datastore key with the current pin value
-  String key = "D";
-  key += pin;
-  Bridge.put(key, String(value));
-}
-
-void analogCommand(YunClient client) {
-  int pin, value;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is a '/' it means we have an URL
-  // with a value like: "/analog/5/120"
-  if (client.read() == '/') {
-    // Read value and execute command
-    value = client.parseInt();
-    analogWrite(pin, value);
-
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" set to analog "));
-    client.println(value);
-
-    // Update datastore key with the current pin value
-    String key = "D";
-    key += pin;
-    Bridge.put(key, String(value));
-  }
-  else {
-    // Read analog pin
-    value = analogRead(pin);
-
-    // Send feedback to client
-    client.print(F("Pin A"));
-    client.print(pin);
-    client.print(F(" reads analog "));
-    client.println(value);
-
-    // Update datastore key with the current pin value
-    String key = "A";
-    key += pin;
-    Bridge.put(key, String(value));
-  }
-}
-
-void modeCommand(YunClient client) {
-  int pin;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is not a '/' we have a malformed URL
-  if (client.read() != '/') {
-    client.println(F("error"));
-    return;
-  }
-
-  String mode = client.readStringUntil('\r');
-
-  if (mode == "input") {
-    pinMode(pin, INPUT);
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" configured as INPUT!"));
-    return;
-  }
-
-  if (mode == "output") {
-    pinMode(pin, OUTPUT);
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" configured as OUTPUT!"));
-    return;
-  }
-
-  client.print(F("error: invalid mode "));
-  client.print(mode);
-}
-
-