diff --git a/app/src/processing/app/Resources_en.po b/app/src/processing/app/Resources_en.po index dcb865abe..e6fba8531 100644 --- a/app/src/processing/app/Resources_en.po +++ b/app/src/processing/app/Resources_en.po @@ -1,622 +1,296 @@ # English translations for PACKAGE package. # Copyright (C) 2012 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. -# David A. Mellis <>, 2012. -# +# +# Translators: msgid "" msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" +"Project-Id-Version: Arduino IDE 1.5\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-03-29 10:24-0400\n" -"PO-Revision-Date: 2012-03-29 10:24-0400\n" -"Last-Translator: David A. Mellis <>\n" +"PO-Revision-Date: 2012-10-31 15:17+0000\n" +"Last-Translator: Deiv Xile \n" "Language-Team: English\n" -"Language: en\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ASCII\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" +"Language: en\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: Editor.java:366 -msgid "No files were added to the sketch." -msgstr "" +#: Base.java:191 +msgid "Non-fatal error while setting the Look & Feel." +msgstr "Non-fatal error while setting the Look & Feel." -#: Editor.java:369 Sketch.java:996 -msgid "One file added to the sketch." -msgstr "" +#: Base.java:192 +msgid "The error message follows, however Arduino should run fine." +msgstr "The error message follows, however Arduino should run fine." -#: Editor.java:373 -#, java-format -msgid "{0} files added to the sketch." -msgstr "" +#: Base.java:227 +msgid "Problem Setting the Platform" +msgstr "Problem Setting the Platform" -#: Editor.java:484 -msgid "File" -msgstr "" +#: Base.java:228 +msgid "" +"An unknown error occurred while trying to load\n" +"platform-specific code for your machine." +msgstr "An unknown error occurred while trying to load\nplatform-specific code for your machine." -#: Editor.java:486 EditorToolbar.java:41 -msgid "New" -msgstr "" +#: Base.java:239 +msgid "Please install JDK 1.5 or later" +msgstr "Please install JDK 1.5 or later" -#: Editor.java:494 Base.java:903 -msgid "Open..." -msgstr "" +#: Base.java:240 +msgid "" +"Arduino requires a full JDK (not just a JRE)\n" +"to run. Please install JDK 1.5 or later.\n" +"More information can be found in the reference." +msgstr "Arduino requires a full JDK (not just a JRE)\nto run. Please install JDK 1.5 or later.\nMore information can be found in the reference." -#: Editor.java:503 -msgid "Sketchbook" -msgstr "" +#: Base.java:258 +msgid "Sketchbook folder disappeared" +msgstr "Sketchbook folder disappeared" -#: Editor.java:509 -msgid "Examples" -msgstr "" +#: Base.java:259 +msgid "" +"The sketchbook folder no longer exists.\n" +"Arduino will switch to the default sketchbook\n" +"location, and create a new sketchbook folder if\n" +"necessary. Arduino will then stop talking about\n" +"himself in the third person." +msgstr "The sketchbook folder no longer exists.\nArduino will switch to the default sketchbook\nlocation, and create a new sketchbook folder if\nnecessary. Arduino will then stop talking about\nhimself in the third person." -#: Editor.java:514 Editor.java:1977 -msgid "Close" -msgstr "" +#: Base.java:535 +msgid "Time for a Break" +msgstr "Time for a Break" -#: Editor.java:522 Editor.java:2017 Editor.java:2421 EditorToolbar.java:41 -#: EditorToolbar.java:46 -msgid "Save" -msgstr "" +#: Base.java:536 +msgid "" +"You've reached the limit for auto naming of new sketches\n" +"for the day. How about going for a walk instead?" +msgstr "You've reached the limit for auto naming of new sketches\nfor the day. How about going for a walk instead?" -#: Editor.java:530 -msgid "Save As..." -msgstr "" +#: Base.java:540 +msgid "Sunshine" +msgstr "Sunshine" -#: Editor.java:538 EditorToolbar.java:41 -msgid "Upload" -msgstr "" +#: Base.java:541 +msgid "No really, time for some fresh air for you." +msgstr "No really, time for some fresh air for you." -#: Editor.java:546 EditorToolbar.java:46 -msgid "Upload Using Programmer" -msgstr "" +#: Base.java:636 +msgid "Open an Arduino sketch..." +msgstr "Open an Arduino sketch..." -#: Editor.java:556 -msgid "Page Setup" -msgstr "" +#: Base.java:773 +msgid "" +" Are you " +"sure you want to Quit?

Closing the last open sketch will quit Arduino." +msgstr " Are you sure you want to Quit?

Closing the last open sketch will quit Arduino." -#: Editor.java:564 -msgid "Print" -msgstr "" - -#: Editor.java:576 Preferences.java:279 -msgid "Preferences" -msgstr "" - -#: Editor.java:586 Base.java:782 +#: Base.java:783 Editor.java:593 msgid "Quit" -msgstr "" +msgstr "Quit" -#: Editor.java:600 -msgid "Sketch" -msgstr "" +#: Base.java:903 Editor.java:501 +msgid "Open..." +msgstr "Open..." -#: Editor.java:602 -msgid "Verify / Compile" -msgstr "" +#: Base.java:963 +msgid "Add Library..." +msgstr "Add Library..." -#: Editor.java:629 -msgid "Import Library..." -msgstr "" - -#: Editor.java:634 -msgid "Show Sketch Folder" -msgstr "" - -#: Editor.java:643 -msgid "Add File..." -msgstr "" - -#: Editor.java:656 -msgid "Tools" -msgstr "" - -#: Editor.java:662 EditorToolbar.java:41 EditorToolbar.java:46 -msgid "Serial Monitor" -msgstr "" - -#: Editor.java:682 -msgid "Board" -msgstr "" - -#: Editor.java:690 -msgid "Serial Port" -msgstr "" - -#: Editor.java:695 -msgid "Programmer" -msgstr "" - -#: Editor.java:699 -msgid "Burn Bootloader" -msgstr "" - -#: Editor.java:923 -msgid "serialMenu is null" -msgstr "" - -#: Editor.java:927 Editor.java:934 -msgid "name is null" -msgstr "" - -#: Editor.java:986 -msgid "error retrieving port list" -msgstr "" - -#: Editor.java:1002 -msgid "Help" -msgstr "" - -#: Editor.java:1041 -msgid "Getting Started" -msgstr "" - -#: Editor.java:1049 -msgid "Environment" -msgstr "" - -#: Editor.java:1057 -msgid "Troubleshooting" -msgstr "" - -#: Editor.java:1065 -msgid "Reference" -msgstr "" - -#: Editor.java:1073 Editor.java:2728 -msgid "Find in Reference" -msgstr "" - -#: Editor.java:1083 -msgid "Frequently Asked Questions" -msgstr "" - -#: Editor.java:1091 -msgid "Visit Arduino.cc" -msgstr "" - -#: Editor.java:1094 -msgid "http://arduino.cc/" -msgstr "" - -#: Editor.java:1102 -msgid "About Arduino" -msgstr "" - -#: Editor.java:1116 -msgid "Edit" -msgstr "" - -#: Editor.java:1119 Editor.java:1341 -msgid "Undo" -msgstr "" - -#: Editor.java:1124 Editor.java:1126 Editor.java:1376 -msgid "Redo" -msgstr "" - -#: Editor.java:1135 Editor.java:2652 -msgid "Cut" -msgstr "" - -#: Editor.java:1143 Editor.java:2660 -msgid "Copy" -msgstr "" - -#: Editor.java:1151 Editor.java:2668 -msgid "Copy for Forum" -msgstr "" - -#: Editor.java:1163 Editor.java:2676 -msgid "Copy as HTML" -msgstr "" - -#: Editor.java:1175 Editor.java:2684 -msgid "Paste" -msgstr "" - -#: Editor.java:1184 Editor.java:2692 -msgid "Select All" -msgstr "" - -#: Editor.java:1194 Editor.java:2702 -msgid "Comment/Uncomment" -msgstr "" - -#: Editor.java:1202 Editor.java:2710 -msgid "Increase Indent" -msgstr "" - -#: Editor.java:1210 Editor.java:2718 -msgid "Decrease Indent" -msgstr "" - -#: Editor.java:1220 -msgid "Find..." -msgstr "" - -#: Editor.java:1235 -msgid "Find Next" -msgstr "" - -#: Editor.java:1245 -msgid "Find Previous" -msgstr "" - -#: Editor.java:1255 -msgid "Use Selection For Find" -msgstr "" - -#: Editor.java:1816 -msgid "First select a word to find in the reference." -msgstr "" - -#: Editor.java:1823 -#, java-format -msgid "No reference available for \"{0}\"" -msgstr "" - -#: Editor.java:1826 -#, java-format -msgid "{0}.html" -msgstr "" - -#: Editor.java:1843 Sketch.java:1647 -msgid "Compiling sketch..." -msgstr "" - -#: Editor.java:1864 Editor.java:1881 -msgid "Done compiling." -msgstr "" - -#: Editor.java:1973 -#, java-format -msgid "Save changes to \"{0}\"? " -msgstr "" - -#: Editor.java:2006 -msgid "" -" Do you " -"want to save changes to this sketch
before closing?

If you don't " -"save, your changes will be lost." -msgstr "" - -#: Editor.java:2017 Editor.java:2098 Editor.java:2418 Sketch.java:589 -#: Sketch.java:741 Sketch.java:1046 Preferences.java:78 -msgid "Cancel" -msgstr "" - -#: Editor.java:2017 -msgid "Don't Save" -msgstr "" - -#: Editor.java:2089 -msgid "Bad file selected" -msgstr "" - -#: Editor.java:2090 -msgid "" -"Processing can only open its own sketches\n" -"and other files ending in .ino or .pde" -msgstr "" - -#: Editor.java:2098 Editor.java:2418 Sketch.java:589 Sketch.java:741 -#: Sketch.java:1046 Preferences.java:79 -msgid "OK" -msgstr "" - -#: Editor.java:2100 +#: Base.java:1054 Base.java:2674 #, java-format msgid "" -"The file \"{0}\" needs to be inside\n" -"a sketch folder named \"{1}\".\n" -"Create this folder, move the file, and continue?" -msgstr "" +"The library \"{0}\" cannot be used.\n" +"Library names must contain only basic letters and numbers.\n" +"(ASCII only and no spaces, and it cannot start with a number)" +msgstr "The library \"{0}\" cannot be used.\nLibrary names must contain only basic letters and numbers.\n(ASCII only and no spaces, and it cannot start with a number)" -#: Editor.java:2109 -msgid "Moving" -msgstr "" +#: Base.java:1058 +msgid "Ignoring bad library name" +msgstr "Ignoring bad library name" -#: Editor.java:2120 Editor.java:2131 Editor.java:2141 Editor.java:2159 -#: Sketch.java:479 Sketch.java:485 Sketch.java:500 Sketch.java:507 -#: Sketch.java:530 Sketch.java:547 Base.java:1861 Preferences.java:240 +#: Base.java:1411 +msgid "Sketch Does Not Exist" +msgstr "Sketch Does Not Exist" + +#: Base.java:1412 +msgid "" +"The selected sketch no longer exists.\n" +"You may need to restart Arduino to update\n" +"the sketchbook menu." +msgstr "The selected sketch no longer exists.\nYou may need to restart Arduino to update\nthe sketchbook menu." + +#: Base.java:1430 +#, java-format +msgid "" +"The sketch \"{0}\" cannot be used.\n" +"Sketch names must contain only basic letters and numbers\n" +"(ASCII-only with no spaces, and it cannot start with a number).\n" +"To get rid of this message, remove the sketch from\n" +"{1}" +msgstr "The sketch \"{0}\" cannot be used.\nSketch names must contain only basic letters and numbers\n(ASCII-only with no spaces, and it cannot start with a number).\nTo get rid of this message, remove the sketch from\n{1}" + +#: Base.java:1436 +msgid "Ignoring sketch with bad name" +msgstr "Ignoring sketch with bad name" + +#: Base.java:1673 +msgid "Problem getting data folder" +msgstr "Problem getting data folder" + +#: Base.java:1674 +msgid "Error getting the Arduino data folder." +msgstr "Error getting the Arduino data folder." + +#: Base.java:1681 +msgid "Settings issues" +msgstr "Settings issues" + +#: Base.java:1682 +msgid "" +"Arduino cannot run because it could not\n" +"create a folder to store your settings." +msgstr "Arduino cannot run because it could not\ncreate a folder to store your settings." + +#: Base.java:1851 +msgid "" +"For information on installing libraries, see: " +"http://arduino.cc/en/Guide/Libraries\n" +msgstr "For information on installing libraries, see: http://arduino.cc/en/Guide/Libraries\n" + +#: Base.java:1888 +msgid "You forgot your sketchbook" +msgstr "You forgot your sketchbook" + +#: Base.java:1889 +msgid "" +"Arduino cannot run because it could not\n" +"create a folder to store your sketchbook." +msgstr "Arduino cannot run because it could not\ncreate a folder to store your sketchbook." + +#: Base.java:1909 +msgid "Select (or create new) folder for sketches..." +msgstr "Select (or create new) folder for sketches..." + +#: Base.java:1933 +msgid "Problem Opening URL" +msgstr "Problem Opening URL" + +#: Base.java:1934 +#, java-format +msgid "" +"Could not open the URL\n" +"{0}" +msgstr "Could not open the URL\n{0}" + +#: Base.java:1957 +msgid "Problem Opening Folder" +msgstr "Problem Opening Folder" + +#: Base.java:1958 +#, java-format +msgid "" +"Could not open the folder\n" +"{0}" +msgstr "Could not open the folder\n{0}" + +#: Base.java:2071 +msgid "Guide_MacOSX.html" +msgstr "Guide_MacOSX.html" + +#: Base.java:2073 +msgid "Guide_Windows.html" +msgstr "Guide_Windows.html" + +#: Base.java:2075 +msgid "http://www.arduino.cc/playground/Learning/Linux" +msgstr "http://www.arduino.cc/playground/Learning/Linux" + +#: Base.java:2080 +msgid "index.html" +msgstr "index.html" + +#: Base.java:2085 +msgid "Guide_Environment.html" +msgstr "Guide_Environment.html" + +#: Base.java:2090 +msgid "environment" +msgstr "environment" + +#: Base.java:2090 +msgid "platforms.html" +msgstr "platforms.html" + +#: Base.java:2095 +msgid "Guide_Troubleshooting.html" +msgstr "Guide_Troubleshooting.html" + +#: Base.java:2100 +msgid "FAQ.html" +msgstr "FAQ.html" + +#: Base.java:2112 +msgid "Message" +msgstr "Message" + +#: Base.java:2128 +msgid "Warning" +msgstr "Warning" + +#: Base.java:2147 Preferences.java:256 Sketch.java:475 Sketch.java:481 +#: Sketch.java:496 Sketch.java:503 Sketch.java:526 Sketch.java:543 +#: Editor.java:2167 Editor.java:2178 Editor.java:2188 Editor.java:2206 msgid "Error" -msgstr "" +msgstr "Error" -#: Editor.java:2122 +#: Base.java:2482 #, java-format -msgid "A folder named \"{0}\" already exists. Can't open sketch." -msgstr "" +msgid "Could not remove old version of {0}" +msgstr "Could not remove old version of {0}" -#: Editor.java:2132 -msgid "Could not create the sketch folder." -msgstr "" - -#: Editor.java:2141 -msgid "Could not copy to a proper location." -msgstr "" - -#: Editor.java:2159 -msgid "Could not create the sketch." -msgstr "" - -#: Editor.java:2166 +#: Base.java:2492 #, java-format -msgid "{0} | Arduino {1}" -msgstr "" +msgid "Could not replace {0}" +msgstr "Could not replace {0}" -#: Editor.java:2223 Editor.java:2261 -msgid "Saving..." -msgstr "" - -#: Editor.java:2228 Editor.java:2264 -msgid "Done Saving." -msgstr "" - -#: Editor.java:2270 -msgid "Save Canceled." -msgstr "" - -#: Editor.java:2296 +#: Base.java:2533 Base.java:2556 #, java-format -msgid "" -"Serial port {0} not found.\n" -"Retry the upload with another serial port?" -msgstr "" +msgid "Could not delete {0}" +msgstr "Could not delete {0}" -#: Editor.java:2331 -msgid "Uploading to I/O Board..." -msgstr "" +#: Base.java:2636 +msgid "Select a zip file or a folder containing the library you'd like to add" +msgstr "Select a zip file or a folder containing the library you'd like to add" -#: Editor.java:2348 Editor.java:2384 -msgid "Done uploading." -msgstr "" +#: Base.java:2638 +msgid "ZIP files or folders" +msgstr "ZIP files or folders" -#: Editor.java:2356 Editor.java:2392 -msgid "Upload canceled." -msgstr "" +#: Base.java:2661 +msgid "Zip doesn't contain a library" +msgstr "Zip doesn't contain a library" -#: Editor.java:2420 -msgid "Save changes before export?" -msgstr "" +#: Base.java:2683 +msgid "Not a valid library: no header files found" +msgstr "Not a valid library: no header files found" -#: Editor.java:2435 -msgid "Export canceled, changes must first be saved." -msgstr "" - -#: Editor.java:2457 -msgid "Burning bootloader to I/O Board (this may take a minute)..." -msgstr "" - -#: Editor.java:2463 -msgid "Done burning bootloader." -msgstr "" - -#: Editor.java:2465 Editor.java:2469 Editor.java:2473 -msgid "Error while burning bootloader." -msgstr "" - -#: Editor.java:2500 -msgid "Printing..." -msgstr "" - -#: Editor.java:2517 -msgid "Done printing." -msgstr "" - -#: Editor.java:2520 -msgid "Error while printing." -msgstr "" - -#: Editor.java:2524 -msgid "Printing canceled." -msgstr "" - -#: Editor.java:2572 +#: Base.java:2690 #, java-format -msgid "Bad error line: {0}" -msgstr "" +msgid "A library named {0} already exists" +msgstr "A library named {0} already exists" -#: Editor.java:2641 -msgid "Open URL" -msgstr "" - -#: UpdateCheck.java:53 -msgid "http://www.arduino.cc/latest.txt" -msgstr "" - -#: UpdateCheck.java:103 -msgid "" -"A new version of Arduino is available,\n" -"would you like to visit the Arduino download page?" -msgstr "" - -#: UpdateCheck.java:108 Preferences.java:76 -msgid "Yes" -msgstr "" - -#: UpdateCheck.java:108 Preferences.java:77 -msgid "No" -msgstr "" - -#: UpdateCheck.java:111 -msgid "Update" -msgstr "" - -#: UpdateCheck.java:118 -msgid "http://www.arduino.cc/en/Main/Software" -msgstr "" - -#: FindReplace.java:80 -msgid "Find:" -msgstr "" - -#: FindReplace.java:81 -msgid "Replace with:" -msgstr "" - -#: FindReplace.java:96 -msgid "Ignore Case" -msgstr "" - -#: FindReplace.java:105 -msgid "Wrap Around" -msgstr "" - -#: FindReplace.java:120 FindReplace.java:131 -msgid "Replace All" -msgstr "" - -#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1050 -msgid "Replace" -msgstr "" - -#: FindReplace.java:122 FindReplace.java:129 -msgid "Replace & Find" -msgstr "" - -#: FindReplace.java:123 FindReplace.java:128 -msgid "Previous" -msgstr "" - -#: FindReplace.java:124 FindReplace.java:127 -msgid "Find" -msgstr "" - -#: SerialMonitor.java:93 -msgid "Send" -msgstr "" - -#: SerialMonitor.java:110 -msgid "Autoscroll" -msgstr "" - -#: SerialMonitor.java:112 -msgid "No line ending" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Newline" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Carriage return" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Both NL & CR" -msgstr "" - -#: SerialMonitor.java:130 SerialMonitor.java:133 -msgid " baud" -msgstr "" - -#: Serial.java:147 -#, java-format -msgid "" -"Serial port ''{0}'' already in use. Try quiting any programs that may be " -"using it." -msgstr "" - -#: Serial.java:154 -#, java-format -msgid "Error opening serial port ''{0}''." -msgstr "" - -#: Serial.java:167 -#, java-format -msgid "" -"Serial port ''{0}'' not found. Did you select the right one from the Tools > " -"Serial Port menu?" -msgstr "" - -#: Serial.java:424 -#, java-format -msgid "" -"readBytesUntil() byte buffer is too small for the {0} bytes up to and " -"including char {1}" -msgstr "" - -#: Serial.java:567 -#, java-format -msgid "Error inside Serial.{0}()" -msgstr "" - -#: tools/AutoFormat.java:91 -msgid "Auto Format" -msgstr "" - -#: tools/AutoFormat.java:913 tools/format/src/AutoFormat.java:54 -msgid "No changes necessary for Auto Format." -msgstr "" - -#: tools/AutoFormat.java:919 -msgid "Auto Format Canceled: Too many right parentheses." -msgstr "" - -#: tools/AutoFormat.java:922 -msgid "Auto Format Canceled: Too many left parentheses." -msgstr "" - -#: tools/AutoFormat.java:928 -msgid "Auto Format Canceled: Too many right curly braces." -msgstr "" - -#: tools/AutoFormat.java:931 -msgid "Auto Format Canceled: Too many left curly braces." -msgstr "" - -#: tools/AutoFormat.java:941 -msgid "Auto Format finished." -msgstr "" - -#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 -#: tools/FixEncoding.java:79 -msgid "Fix Encoding & Reload" -msgstr "" - -#: tools/FixEncoding.java:57 -msgid "Discard all changes and reload sketch?" -msgstr "" - -#: tools/FixEncoding.java:77 -msgid "" -"An error occurred while trying to fix the file encoding.\n" -"Do not attempt to save this sketch as it may overwrite\n" -"the old version. Use Open to re-open the sketch and try again.\n" -msgstr "" - -#: tools/Archiver.java:48 -msgid "Archive Sketch" -msgstr "" - -#: tools/Archiver.java:59 -msgid "yyMMdd" -msgstr "" - -#: tools/Archiver.java:74 -msgid "Couldn't archive sketch" -msgstr "" - -#: tools/Archiver.java:75 -msgid "" -"Archiving the sketch has been canceled because\n" -"the sketch couldn't save properly." -msgstr "" - -#: tools/Archiver.java:109 -msgid "Archive sketch as:" -msgstr "" - -#: tools/Archiver.java:139 -msgid "Archive sketch canceled." -msgstr "" +#: Base.java:2699 +msgid "Library added to your libraries. Check \"Import library\" menu" +msgstr "Library added to your libraries. Check \"Import library\" menu" #: SketchCode.java:83 #, java-format msgid "Error while loading code {0}" -msgstr "" +msgstr "Error while loading code {0}" #: SketchCode.java:258 #, java-format @@ -625,139 +299,469 @@ msgid "" "older version of Processing,you may need to use Tools -> Fix Encoding & " "Reload to updatethe sketch to use UTF-8 encoding. If not, you may need " "todelete the bad characters to get rid of this warning." -msgstr "" +msgstr "\"{0}\" contains unrecognized characters.If this code was created with an older version of Processing,you may need to use Tools -> Fix Encoding & Reload to updatethe sketch to use UTF-8 encoding. If not, you may need todelete the bad characters to get rid of this warning." -#: Sketch.java:278 Sketch.java:307 Sketch.java:581 Sketch.java:970 +#: FindReplace.java:80 +msgid "Find:" +msgstr "Find:" + +#: FindReplace.java:81 +msgid "Replace with:" +msgstr "Replace with:" + +#: FindReplace.java:96 +msgid "Ignore Case" +msgstr "Ignore Case" + +#: FindReplace.java:105 +msgid "Wrap Around" +msgstr "Wrap Around" + +#: FindReplace.java:120 FindReplace.java:131 +msgid "Replace All" +msgstr "Replace All" + +#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1046 +msgid "Replace" +msgstr "Replace" + +#: FindReplace.java:122 FindReplace.java:129 +msgid "Replace & Find" +msgstr "Replace & Find" + +#: FindReplace.java:123 FindReplace.java:128 +msgid "Previous" +msgstr "Previous" + +#: FindReplace.java:124 FindReplace.java:127 +msgid "Find" +msgstr "Find" + +#: EditorToolbar.java:41 EditorToolbar.java:46 +msgid "Verify" +msgstr "Verify" + +#: EditorToolbar.java:41 Editor.java:545 +msgid "Upload" +msgstr "Upload" + +#: EditorToolbar.java:41 Editor.java:493 +msgid "New" +msgstr "New" + +#: EditorToolbar.java:41 +msgid "Open" +msgstr "Open" + +#: EditorToolbar.java:41 EditorToolbar.java:46 Editor.java:529 +#: Editor.java:2064 Editor.java:2468 +msgid "Save" +msgstr "Save" + +#: EditorToolbar.java:41 EditorToolbar.java:46 Editor.java:669 +msgid "Serial Monitor" +msgstr "Serial Monitor" + +#: EditorToolbar.java:46 Editor.java:553 +msgid "Upload Using Programmer" +msgstr "Upload Using Programmer" + +#: EditorToolbar.java:46 +msgid "New Editor Window" +msgstr "New Editor Window" + +#: EditorToolbar.java:46 +msgid "Open in Another Window" +msgstr "Open in Another Window" + +#: Preferences.java:77 UpdateCheck.java:108 +msgid "Yes" +msgstr "Yes" + +#: Preferences.java:78 UpdateCheck.java:108 +msgid "No" +msgstr "No" + +#: Preferences.java:79 Sketch.java:585 Sketch.java:737 Sketch.java:1042 +#: Editor.java:2064 Editor.java:2145 Editor.java:2465 +msgid "Cancel" +msgstr "Cancel" + +#: Preferences.java:80 Sketch.java:585 Sketch.java:737 Sketch.java:1042 +#: Editor.java:2145 Editor.java:2465 +msgid "OK" +msgstr "OK" + +#: Preferences.java:81 +msgid "Browse" +msgstr "Browse" + +#: Preferences.java:84 +msgid "System Default" +msgstr "System Default" + +#: Preferences.java:85 +msgid "Arabic" +msgstr "Arabic" + +#: Preferences.java:86 +msgid "Aragonese" +msgstr "Aragonese" + +#: Preferences.java:87 +msgid "Catalan" +msgstr "Catalan" + +#: Preferences.java:88 +msgid "Chinese Simplified" +msgstr "Chinese Simplified" + +#: Preferences.java:89 +msgid "Chinese Traditional" +msgstr "Chinese Traditional" + +#: Preferences.java:90 +msgid "Danish" +msgstr "Danish" + +#: Preferences.java:91 +msgid "Dutch" +msgstr "Dutch" + +#: Preferences.java:92 +msgid "English" +msgstr "English" + +#: Preferences.java:93 +msgid "Estonian" +msgstr "Estonian" + +#: Preferences.java:94 +msgid "Filipino" +msgstr "Filipino" + +#: Preferences.java:95 +msgid "French" +msgstr "French" + +#: Preferences.java:96 +msgid "Galician" +msgstr "Galician" + +#: Preferences.java:97 +msgid "German" +msgstr "German" + +#: Preferences.java:98 +msgid "Greek" +msgstr "Greek" + +#: Preferences.java:99 +msgid "Hindi" +msgstr "Hindi" + +#: Preferences.java:100 +msgid "Hungarian" +msgstr "Hungarian" + +#: Preferences.java:101 +msgid "Indonesian" +msgstr "Indonesian" + +#: Preferences.java:102 +msgid "Italian" +msgstr "Italian" + +#: Preferences.java:103 +msgid "Japanese" +msgstr "Japanese" + +#: Preferences.java:104 +msgid "Korean" +msgstr "Korean" + +#: Preferences.java:105 +msgid "Latvian" +msgstr "Latvian" + +#: Preferences.java:106 +msgid "Lithuaninan" +msgstr "Lithuaninan" + +#: Preferences.java:107 +msgid "Marathi" +msgstr "Marathi" + +#: Preferences.java:108 +msgid "Norwegian" +msgstr "Norwegian" + +#: Preferences.java:109 +msgid "Persian" +msgstr "Persian" + +#: Preferences.java:110 +msgid "Polish" +msgstr "Polish" + +#: Preferences.java:111 Preferences.java:112 +msgid "Portuguese" +msgstr "Portuguese" + +#: Preferences.java:113 +msgid "Romanian" +msgstr "Romanian" + +#: Preferences.java:114 +msgid "Russian" +msgstr "Russian" + +#: Preferences.java:115 +msgid "Spanish" +msgstr "Spanish" + +#: Preferences.java:116 +msgid "Tamil" +msgstr "Tamil" + +#: Preferences.java:219 +msgid "" +"Could not read default settings.\n" +"You'll need to reinstall Arduino." +msgstr "Could not read default settings.\nYou'll need to reinstall Arduino." + +#: Preferences.java:258 +#, java-format +msgid "Could not read preferences from {0}" +msgstr "Could not read preferences from {0}" + +#: Preferences.java:277 +msgid "Error reading preferences" +msgstr "Error reading preferences" + +#: Preferences.java:279 +#, java-format +msgid "" +"Error reading the preferences file. Please delete (or move)\n" +"{0} and restart Arduino." +msgstr "Error reading the preferences file. Please delete (or move)\n{0} and restart Arduino." + +#: Preferences.java:295 Editor.java:583 +msgid "Preferences" +msgstr "Preferences" + +#: Preferences.java:315 +msgid "Sketchbook location:" +msgstr "Sketchbook location:" + +#: Preferences.java:330 +msgid "Select new sketchbook location" +msgstr "Select new sketchbook location" + +#: Preferences.java:353 +msgid "Editor language: " +msgstr "Editor language: " + +#: Preferences.java:358 Preferences.java:374 +msgid " (requires restart of Arduino)" +msgstr " (requires restart of Arduino)" + +#: Preferences.java:370 +msgid "Editor font size: " +msgstr "Editor font size: " + +#: Preferences.java:387 +msgid "Show verbose output during: " +msgstr "Show verbose output during: " + +#: Preferences.java:389 +msgid "compilation " +msgstr "compilation " + +#: Preferences.java:391 +msgid "upload" +msgstr "upload" + +#: Preferences.java:400 +msgid "Verify code after upload" +msgstr "Verify code after upload" + +#: Preferences.java:409 +msgid "Use external editor" +msgstr "Use external editor" + +#: Preferences.java:419 +msgid "Check for updates on startup" +msgstr "Check for updates on startup" + +#: Preferences.java:428 +msgid "Update sketch files to new extension on save (.pde -> .ino)" +msgstr "Update sketch files to new extension on save (.pde -> .ino)" + +#: Preferences.java:439 +msgid "Automatically associate .ino files with Arduino" +msgstr "Automatically associate .ino files with Arduino" + +#: Preferences.java:449 +msgid "More preferences can be edited directly in the file" +msgstr "More preferences can be edited directly in the file" + +#: Preferences.java:478 +msgid "(edit only when Arduino is not running)" +msgstr "(edit only when Arduino is not running)" + +#: Preferences.java:625 +#, java-format +msgid "ignoring invalid font size {0}" +msgstr "ignoring invalid font size {0}" + +#: EditorHeader.java:292 +msgid "New Tab" +msgstr "New Tab" + +#: EditorHeader.java:300 +msgid "Rename" +msgstr "Rename" + +#: EditorHeader.java:314 Sketch.java:591 +msgid "Delete" +msgstr "Delete" + +#: EditorHeader.java:326 +msgid "Previous Tab" +msgstr "Previous Tab" + +#: EditorHeader.java:340 +msgid "Next Tab" +msgstr "Next Tab" + +#: Sketch.java:274 Sketch.java:303 Sketch.java:577 Sketch.java:966 msgid "Sketch is Read-Only" -msgstr "" +msgstr "Sketch is Read-Only" -#: Sketch.java:279 Sketch.java:308 Sketch.java:582 Sketch.java:971 +#: Sketch.java:275 Sketch.java:304 Sketch.java:578 Sketch.java:967 msgid "" "Some files are marked \"read-only\", so you'll\n" "need to re-save the sketch in another location,\n" "and try again." -msgstr "" +msgstr "Some files are marked \"read-only\", so you'll\nneed to re-save the sketch in another location,\nand try again." -#: Sketch.java:286 +#: Sketch.java:282 msgid "Name for new file:" -msgstr "" +msgstr "Name for new file:" -#: Sketch.java:298 +#: Sketch.java:294 msgid "Sketch is Untitled" -msgstr "" +msgstr "Sketch is Untitled" -#: Sketch.java:299 +#: Sketch.java:295 msgid "" "How about saving the sketch first \n" "before trying to rename it?" -msgstr "" +msgstr "How about saving the sketch first \nbefore trying to rename it?" -#: Sketch.java:359 Sketch.java:366 Sketch.java:377 +#: Sketch.java:355 Sketch.java:362 Sketch.java:373 msgid "Problem with rename" -msgstr "" +msgstr "Problem with rename" -#: Sketch.java:360 +#: Sketch.java:356 msgid "The name cannot start with a period." -msgstr "" +msgstr "The name cannot start with a period." -#: Sketch.java:368 +#: Sketch.java:364 #, java-format msgid "\".{0}\" is not a valid extension." -msgstr "" +msgstr "\".{0}\" is not a valid extension." -#: Sketch.java:378 +#: Sketch.java:374 msgid "" "The main file can't use an extension.\n" "(It may be time for your to graduate to a\n" "\"real\" programming environment)" -msgstr "" +msgstr "The main file can't use an extension.\n(It may be time for your to graduate to a\n\"real\" programming environment)" -#: Sketch.java:400 Sketch.java:414 Sketch.java:423 Sketch.java:863 +#: Sketch.java:396 Sketch.java:410 Sketch.java:419 Sketch.java:859 msgid "Nope" -msgstr "" +msgstr "Nope" -#: Sketch.java:402 +#: Sketch.java:398 #, java-format msgid "A file named \"{0}\" already exists in \"{1}\"" -msgstr "" +msgstr "A file named \"{0}\" already exists in \"{1}\"" -#: Sketch.java:415 +#: Sketch.java:411 msgid "You can't have a .cpp file with the same name as the sketch." -msgstr "" +msgstr "You can't have a .cpp file with the same name as the sketch." -#: Sketch.java:425 +#: Sketch.java:421 msgid "" "You can't rename the sketch to \"{0}\"\n" "because the sketch already has a .cpp file with that name." -msgstr "" +msgstr "You can't rename the sketch to \"{0}\"\nbecause the sketch already has a .cpp file with that name." -#: Sketch.java:459 +#: Sketch.java:455 msgid "Cannot Rename" -msgstr "" +msgstr "Cannot Rename" -#: Sketch.java:461 +#: Sketch.java:457 #, java-format msgid "Sorry, a sketch (or folder) named \"{0}\" already exists." -msgstr "" +msgstr "Sorry, a sketch (or folder) named \"{0}\" already exists." -#: Sketch.java:479 +#: Sketch.java:475 msgid "Could not rename the sketch. (0)" -msgstr "" +msgstr "Could not rename the sketch. (0)" -#: Sketch.java:487 Sketch.java:532 +#: Sketch.java:483 Sketch.java:528 #, java-format msgid "Could not rename \"{0}\" to \"{1}\"" -msgstr "" +msgstr "Could not rename \"{0}\" to \"{1}\"" -#: Sketch.java:500 +#: Sketch.java:496 msgid "Could not rename the sketch. (1)" -msgstr "" +msgstr "Could not rename the sketch. (1)" -#: Sketch.java:507 +#: Sketch.java:503 msgid "Could not rename the sketch. (2)" -msgstr "" +msgstr "Could not rename the sketch. (2)" -#: Sketch.java:544 +#: Sketch.java:540 msgid "createNewFile() returned false" -msgstr "" +msgstr "createNewFile() returned false" -#: Sketch.java:591 +#: Sketch.java:587 msgid "Are you sure you want to delete this sketch?" -msgstr "" +msgstr "Are you sure you want to delete this sketch?" -#: Sketch.java:592 +#: Sketch.java:588 #, java-format msgid "Are you sure you want to delete \"{0}\"?" -msgstr "" +msgstr "Are you sure you want to delete \"{0}\"?" -#: Sketch.java:595 EditorHeader.java:314 -msgid "Delete" -msgstr "" - -#: Sketch.java:620 +#: Sketch.java:616 msgid "Couldn't do it" -msgstr "" +msgstr "Couldn't do it" -#: Sketch.java:621 +#: Sketch.java:617 #, java-format msgid "Could not delete \"{0}\"." -msgstr "" +msgstr "Could not delete \"{0}\"." -#: Sketch.java:651 +#: Sketch.java:647 msgid "removeCode: internal error.. could not find code" -msgstr "" +msgstr "removeCode: internal error.. could not find code" -#: Sketch.java:724 +#: Sketch.java:720 msgid "Sketch is read-only" -msgstr "" +msgstr "Sketch is read-only" -#: Sketch.java:725 +#: Sketch.java:721 msgid "" "Some files are marked \"read-only\", so you'll\n" "need to re-save this sketch to another location." -msgstr "" +msgstr "Some files are marked \"read-only\", so you'll\nneed to re-save this sketch to another location." -#: Sketch.java:743 +#: Sketch.java:739 msgid "" "In Arduino 1.0, the default file extension has changed\n" "from .pde to .ino. New sketches (including those created\n" @@ -766,753 +770,809 @@ msgid "" "disable this in the Preferences dialog.\n" "\n" "Save sketch and update its extension?" -msgstr "" +msgstr "In Arduino 1.0, the default file extension has changed\nfrom .pde to .ino. New sketches (including those created\nby \"Save-As\" will use the new extension. The extension\nof existing sketches will be updated on save, but you can\ndisable this in the Preferences dialog.\n\nSave sketch and update its extension?" -#: Sketch.java:750 +#: Sketch.java:746 msgid ".pde -> .ino" -msgstr "" +msgstr ".pde -> .ino" -#: Sketch.java:829 +#: Sketch.java:825 msgid "Save sketch folder as..." -msgstr "" +msgstr "Save sketch folder as..." -#: Sketch.java:865 +#: Sketch.java:861 msgid "" "You can't save the sketch as \"{0}\"\n" "because the sketch already has a .cpp file with that name." -msgstr "" +msgstr "You can't save the sketch as \"{0}\"\nbecause the sketch already has a .cpp file with that name." -#: Sketch.java:886 +#: Sketch.java:882 msgid "How very Borges of you" -msgstr "" +msgstr "How very Borges of you" -#: Sketch.java:887 +#: Sketch.java:883 msgid "" "You cannot save the sketch into a folder\n" "inside itself. This would go on forever." -msgstr "" +msgstr "You cannot save the sketch into a folder\ninside itself. This would go on forever." -#: Sketch.java:979 +#: Sketch.java:975 msgid "Select an image or other data file to copy to your sketch" -msgstr "" +msgstr "Select an image or other data file to copy to your sketch" -#: Sketch.java:1047 +#: Sketch.java:992 Editor.java:376 +msgid "One file added to the sketch." +msgstr "One file added to the sketch." + +#: Sketch.java:1043 #, java-format msgid "Replace the existing version of {0}?" -msgstr "" +msgstr "Replace the existing version of {0}?" -#: Sketch.java:1069 Sketch.java:1092 +#: Sketch.java:1065 Sketch.java:1088 msgid "Error adding file" -msgstr "" +msgstr "Error adding file" -#: Sketch.java:1070 +#: Sketch.java:1066 #, java-format msgid "Could not delete the existing ''{0}'' file." -msgstr "" +msgstr "Could not delete the existing ''{0}'' file." -#: Sketch.java:1078 +#: Sketch.java:1074 msgid "You can't fool me" -msgstr "" +msgstr "You can't fool me" -#: Sketch.java:1079 +#: Sketch.java:1075 msgid "" "This file has already been copied to the\n" "location from which where you're trying to add it.\n" "I ain't not doin nuthin'." -msgstr "" +msgstr "This file has already been copied to the\nlocation from which where you're trying to add it.\nI ain't not doin nuthin'." -#: Sketch.java:1093 +#: Sketch.java:1089 #, java-format msgid "Could not add ''{0}'' to the sketch." -msgstr "" +msgstr "Could not add ''{0}'' to the sketch." -#: Sketch.java:1393 Sketch.java:1424 +#: Sketch.java:1392 Sketch.java:1423 msgid "Build folder disappeared or could not be written" -msgstr "" +msgstr "Build folder disappeared or could not be written" -#: Sketch.java:1408 +#: Sketch.java:1407 msgid "Could not find main class" -msgstr "" +msgstr "Could not find main class" -#: Sketch.java:1433 +#: Sketch.java:1432 #, java-format msgid "Uncaught exception type: {0}" -msgstr "" +msgstr "Uncaught exception type: {0}" -#: Sketch.java:1465 +#: Sketch.java:1467 #, java-format msgid "Problem moving {0} to the build folder" -msgstr "" +msgstr "Problem moving {0} to the build folder" -#: Sketch.java:1661 +#: Sketch.java:1608 Editor.java:1890 +msgid "Compiling sketch..." +msgstr "Compiling sketch..." + +#: Sketch.java:1622 msgid "Uploading..." -msgstr "" +msgstr "Uploading..." -#: Sketch.java:1684 +#: Sketch.java:1644 #, java-format msgid "Binary sketch size: {0} bytes (of a {1} byte maximum)" -msgstr "" +msgstr "Binary sketch size: {0} bytes (of a {1} byte maximum)" -#: Sketch.java:1689 +#: Sketch.java:1647 msgid "Couldn't determine program size: {0}" -msgstr "" +msgstr "Couldn't determine program size: {0}" -#: Sketch.java:1694 +#: Sketch.java:1653 msgid "" "Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for " "tips on reducing it." -msgstr "" +msgstr "Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it." + +#: Sketch.java:1712 +msgid "Missing the */ from the end of a /* comment */" +msgstr "Missing the */ from the end of a /* comment */" #: Sketch.java:1754 -msgid "Missing the */ from the end of a /* comment */" -msgstr "" - -#: Sketch.java:1796 msgid "Sketch Disappeared" -msgstr "" +msgstr "Sketch Disappeared" -#: Sketch.java:1797 +#: Sketch.java:1755 msgid "" "The sketch folder has disappeared.\n" " Will attempt to re-save in the same location,\n" "but anything besides the code will be lost." -msgstr "" +msgstr "The sketch folder has disappeared.\n Will attempt to re-save in the same location,\nbut anything besides the code will be lost." -#: Sketch.java:1810 +#: Sketch.java:1768 msgid "Could not re-save sketch" -msgstr "" +msgstr "Could not re-save sketch" -#: Sketch.java:1811 +#: Sketch.java:1769 msgid "" "Could not properly re-save the sketch. You may be in trouble at this point,\n" "and it might be time to copy and paste your code to another text editor." -msgstr "" +msgstr "Could not properly re-save the sketch. You may be in trouble at this point,\nand it might be time to copy and paste your code to another text editor." -#: Sketch.java:2060 +#: Sketch.java:2018 msgid "" "The sketch name had to be modified. Sketch names can only consist\n" "of ASCII characters and numbers (but cannot start with a number).\n" "They should also be less less than 64 characters long." -msgstr "" +msgstr "The sketch name had to be modified. Sketch names can only consist\nof ASCII characters and numbers (but cannot start with a number).\nThey should also be less less than 64 characters long." -#: debug/Uploader.java:52 -msgid "https://developer.berlios.de/bugs/?group_id=3590" -msgstr "" +#: SerialMonitor.java:93 +msgid "Send" +msgstr "Send" -#: debug/Uploader.java:54 debug/Compiler.java:43 +#: SerialMonitor.java:110 +msgid "Autoscroll" +msgstr "Autoscroll" + +#: SerialMonitor.java:112 +msgid "No line ending" +msgstr "No line ending" + +#: SerialMonitor.java:112 +msgid "Newline" +msgstr "Newline" + +#: SerialMonitor.java:112 +msgid "Carriage return" +msgstr "Carriage return" + +#: SerialMonitor.java:112 +msgid "Both NL & CR" +msgstr "Both NL & CR" + +#: SerialMonitor.java:130 SerialMonitor.java:133 +msgid "baud" +msgstr "baud" + +#: debug/Compiler.java:47 +msgid "http://code.google.com/p/arduino/issues/list" +msgstr "http://code.google.com/p/arduino/issues/list" + +#: debug/Compiler.java:49 debug/Uploader.java:45 #, java-format msgid "Compiler error, please submit this code to {0}" -msgstr "" +msgstr "Compiler error, please submit this code to {0}" -#: debug/Uploader.java:199 -#, java-format -msgid "" -"the selected serial port {0} does not exist or your board is not connected" -msgstr "" - -#: debug/Uploader.java:203 -msgid "" -"Device is not responding, check the right serial port is selected or RESET " -"the board right before exporting" -msgstr "" - -#: debug/Uploader.java:209 -msgid "" -"Problem uploading to board. See http://www.arduino.cc/en/Guide/" -"Troubleshooting#upload for suggestions." -msgstr "" - -#: debug/Uploader.java:213 -msgid "" -"Wrong microcontroller found. Did you select the right board from the Tools " -"> Board menu?" -msgstr "" - -#: debug/Compiler.java:41 -msgid "http://code.google.com/p/arduino/issues/list" -msgstr "" - -#: debug/Compiler.java:79 +#: debug/Compiler.java:126 msgid "No board selected; please choose a board from the Tools > Board menu." -msgstr "" +msgstr "No board selected; please choose a board from the Tools > Board menu." -#: debug/Compiler.java:422 +#: debug/Compiler.java:365 #, java-format msgid "{0} returned {1}" -msgstr "" +msgstr "{0} returned {1}" -#: debug/Compiler.java:426 +#: debug/Compiler.java:369 msgid "Error compiling." -msgstr "" +msgstr "Error compiling." -#: debug/Compiler.java:465 +#: debug/Compiler.java:408 msgid "Please import the SPI library from the Sketch > Import Library menu." -msgstr "" +msgstr "Please import the SPI library from the Sketch > Import Library menu." -#: debug/Compiler.java:466 +#: debug/Compiler.java:409 msgid "" "\n" "As of Arduino 0019, the Ethernet library depends on the SPI library.\n" -"You appear to be using it or another library that depends on the SPI " -"library.\n" +"You appear to be using it or another library that depends on the SPI library.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 0019, the Ethernet library depends on the SPI library.\nYou appear to be using it or another library that depends on the SPI library.\n\n" -#: debug/Compiler.java:471 +#: debug/Compiler.java:414 msgid "The 'BYTE' keyword is no longer supported." -msgstr "" +msgstr "The 'BYTE' keyword is no longer supported." -#: debug/Compiler.java:472 +#: debug/Compiler.java:415 msgid "" "\n" "As of Arduino 1.0, the 'BYTE' keyword is no longer supported.\n" "Please use Serial.write() instead.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the 'BYTE' keyword is no longer supported.\nPlease use Serial.write() instead.\n\n" -#: debug/Compiler.java:477 +#: debug/Compiler.java:420 msgid "The Server class has been renamed EthernetServer." -msgstr "" +msgstr "The Server class has been renamed EthernetServer." -#: debug/Compiler.java:478 +#: debug/Compiler.java:421 msgid "" "\n" -"As of Arduino 1.0, the Server class in the Ethernet library has been renamed " -"to EthernetServer.\n" +"As of Arduino 1.0, the Server class in the Ethernet library has been renamed to EthernetServer.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the Server class in the Ethernet library has been renamed to EthernetServer.\n\n" -#: debug/Compiler.java:483 +#: debug/Compiler.java:426 msgid "The Client class has been renamed EthernetClient." -msgstr "" +msgstr "The Client class has been renamed EthernetClient." -#: debug/Compiler.java:484 +#: debug/Compiler.java:427 msgid "" "\n" -"As of Arduino 1.0, the Client class in the Ethernet library has been renamed " -"to EthernetClient.\n" +"As of Arduino 1.0, the Client class in the Ethernet library has been renamed to EthernetClient.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the Client class in the Ethernet library has been renamed to EthernetClient.\n\n" -#: debug/Compiler.java:489 +#: debug/Compiler.java:432 msgid "The Udp class has been renamed EthernetUdp." -msgstr "" +msgstr "The Udp class has been renamed EthernetUdp." -#: debug/Compiler.java:490 +#: debug/Compiler.java:433 msgid "" "\n" -"As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to " -"EthernetClient.\n" +"As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.\n\n" -#: debug/Compiler.java:495 +#: debug/Compiler.java:438 msgid "Wire.send() has been renamed Wire.write()." -msgstr "" +msgstr "Wire.send() has been renamed Wire.write()." -#: debug/Compiler.java:496 +#: debug/Compiler.java:439 msgid "" "\n" -"As of Arduino 1.0, the Wire.send() function was renamed to Wire.write() for " -"consistency with other libraries.\n" +"As of Arduino 1.0, the Wire.send() function was renamed to Wire.write() for consistency with other libraries.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the Wire.send() function was renamed to Wire.write() for consistency with other libraries.\n\n" -#: debug/Compiler.java:501 +#: debug/Compiler.java:444 msgid "Wire.receive() has been renamed Wire.read()." -msgstr "" +msgstr "Wire.receive() has been renamed Wire.read()." -#: debug/Compiler.java:502 +#: debug/Compiler.java:445 msgid "" "\n" -"As of Arduino 1.0, the Wire.receive() function was renamed to Wire.read() " -"for consistency with other libraries.\n" +"As of Arduino 1.0, the Wire.receive() function was renamed to Wire.read() for consistency with other libraries.\n" "\n" -msgstr "" +msgstr "\nAs of Arduino 1.0, the Wire.receive() function was renamed to Wire.read() for consistency with other libraries.\n\n" + +#: debug/Compiler.java:450 +msgid "'Mouse' only supported on the Arduino Leonardo" +msgstr "'Mouse' only supported on the Arduino Leonardo" + +#: debug/Compiler.java:455 +msgid "'Keyboard' only supported on the Arduino Leonardo" +msgstr "'Keyboard' only supported on the Arduino Leonardo" + +#: debug/Uploader.java:43 +msgid "https://developer.berlios.de/bugs/?group_id=3590" +msgstr "https://developer.berlios.de/bugs/?group_id=3590" + +#: debug/Uploader.java:195 +#, java-format +msgid "" +"the selected serial port {0} does not exist or your board is not connected" +msgstr "the selected serial port {0} does not exist or your board is not connected" + +#: debug/Uploader.java:199 +msgid "" +"Device is not responding, check the right serial port is selected or RESET " +"the board right before exporting" +msgstr "Device is not responding, check the right serial port is selected or RESET the board right before exporting" + +#: debug/Uploader.java:209 +msgid "" +"Problem uploading to board. See " +"http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions." +msgstr "Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions." + +#: debug/Uploader.java:213 +msgid "" +"Wrong microcontroller found. Did you select the right board from the Tools " +"> Board menu?" +msgstr "Wrong microcontroller found. Did you select the right board from the Tools > Board menu?" + +#: debug/BasicUploader.java:80 +msgid "Forcing reset using 1200bps open/close on port " +msgstr "Forcing reset using 1200bps open/close on port " + +#: debug/BasicUploader.java:209 +msgid "" +"Couldn't find a Board on the selected port. Check that you have the correct " +"port selected. If it is correct, try pressing the board's reset button " +"after initiating the upload." +msgstr "Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload." + +#: Serial.java:121 +#, java-format +msgid "" +"Serial port ''{0}'' already in use. Try quitting any programs that may be " +"using it." +msgstr "Serial port ''{0}'' already in use. Try quitting any programs that may be using it." + +#: Serial.java:125 +#, java-format +msgid "Error touching serial port ''{0}''." +msgstr "Error touching serial port ''{0}''." + +#: Serial.java:174 +#, java-format +msgid "" +"Serial port ''{0}'' already in use. Try quiting any programs that may be " +"using it." +msgstr "Serial port ''{0}'' already in use. Try quiting any programs that may be using it." + +#: Serial.java:181 +#, java-format +msgid "Error opening serial port ''{0}''." +msgstr "Error opening serial port ''{0}''." + +#: Serial.java:194 +#, java-format +msgid "" +"Serial port ''{0}'' not found. Did you select the right one from the Tools >" +" Serial Port menu?" +msgstr "Serial port ''{0}'' not found. Did you select the right one from the Tools > Serial Port menu?" + +#: Serial.java:451 +#, java-format +msgid "" +"readBytesUntil() byte buffer is too small for the {0} bytes up to and " +"including char {1}" +msgstr "readBytesUntil() byte buffer is too small for the {0} bytes up to and including char {1}" + +#: Serial.java:593 +#, java-format +msgid "Error inside Serial.{0}()" +msgstr "Error inside Serial.{0}()" + +#: UpdateCheck.java:53 +msgid "http://www.arduino.cc/latest.txt" +msgstr "http://www.arduino.cc/latest.txt" + +#: UpdateCheck.java:103 +msgid "" +"A new version of Arduino is available,\n" +"would you like to visit the Arduino download page?" +msgstr "A new version of Arduino is available,\nwould you like to visit the Arduino download page?" + +#: UpdateCheck.java:111 +msgid "Update" +msgstr "Update" + +#: UpdateCheck.java:118 +msgid "http://www.arduino.cc/en/Main/Software" +msgstr "http://www.arduino.cc/en/Main/Software" + +#: Editor.java:373 +msgid "No files were added to the sketch." +msgstr "No files were added to the sketch." + +#: Editor.java:380 +#, java-format +msgid "{0} files added to the sketch." +msgstr "{0} files added to the sketch." + +#: Editor.java:491 +msgid "File" +msgstr "File" + +#: Editor.java:510 +msgid "Sketchbook" +msgstr "Sketchbook" + +#: Editor.java:516 +msgid "Examples" +msgstr "Examples" + +#: Editor.java:521 Editor.java:2024 +msgid "Close" +msgstr "Close" + +#: Editor.java:537 +msgid "Save As..." +msgstr "Save As..." + +#: Editor.java:563 +msgid "Page Setup" +msgstr "Page Setup" + +#: Editor.java:571 +msgid "Print" +msgstr "Print" + +#: Editor.java:607 +msgid "Sketch" +msgstr "Sketch" + +#: Editor.java:609 +msgid "Verify / Compile" +msgstr "Verify / Compile" + +#: Editor.java:636 +msgid "Import Library..." +msgstr "Import Library..." + +#: Editor.java:641 +msgid "Show Sketch Folder" +msgstr "Show Sketch Folder" + +#: Editor.java:650 +msgid "Add File..." +msgstr "Add File..." + +#: Editor.java:663 +msgid "Tools" +msgstr "Tools" + +#: Editor.java:699 +msgid "Serial Port" +msgstr "Serial Port" + +#: Editor.java:704 +msgid "Programmer" +msgstr "Programmer" + +#: Editor.java:708 +msgid "Burn Bootloader" +msgstr "Burn Bootloader" + +#: Editor.java:932 +msgid "serialMenu is null" +msgstr "serialMenu is null" + +#: Editor.java:936 Editor.java:943 +msgid "name is null" +msgstr "name is null" + +#: Editor.java:999 +msgid "error retrieving port list" +msgstr "error retrieving port list" + +#: Editor.java:1015 +msgid "Help" +msgstr "Help" + +#: Editor.java:1054 +msgid "Getting Started" +msgstr "Getting Started" + +#: Editor.java:1062 +msgid "Environment" +msgstr "Environment" + +#: Editor.java:1070 +msgid "Troubleshooting" +msgstr "Troubleshooting" + +#: Editor.java:1078 +msgid "Reference" +msgstr "Reference" + +#: Editor.java:1086 Editor.java:2775 +msgid "Find in Reference" +msgstr "Find in Reference" + +#: Editor.java:1097 +msgid "Frequently Asked Questions" +msgstr "Frequently Asked Questions" + +#: Editor.java:1105 +msgid "Visit Arduino.cc" +msgstr "Visit Arduino.cc" + +#: Editor.java:1108 +msgid "http://arduino.cc/" +msgstr "http://arduino.cc/" + +#: Editor.java:1116 +msgid "About Arduino" +msgstr "About Arduino" + +#: Editor.java:1130 +msgid "Edit" +msgstr "Edit" + +#: Editor.java:1133 Editor.java:1355 +msgid "Undo" +msgstr "Undo" + +#: Editor.java:1138 Editor.java:1140 Editor.java:1390 +msgid "Redo" +msgstr "Redo" + +#: Editor.java:1149 Editor.java:2699 +msgid "Cut" +msgstr "Cut" + +#: Editor.java:1157 Editor.java:2707 +msgid "Copy" +msgstr "Copy" + +#: Editor.java:1165 Editor.java:2715 +msgid "Copy for Forum" +msgstr "Copy for Forum" + +#: Editor.java:1177 Editor.java:2723 +msgid "Copy as HTML" +msgstr "Copy as HTML" + +#: Editor.java:1189 Editor.java:2731 +msgid "Paste" +msgstr "Paste" + +#: Editor.java:1198 Editor.java:2739 +msgid "Select All" +msgstr "Select All" + +#: Editor.java:1208 Editor.java:2749 +msgid "Comment/Uncomment" +msgstr "Comment/Uncomment" + +#: Editor.java:1216 Editor.java:2757 +msgid "Increase Indent" +msgstr "Increase Indent" + +#: Editor.java:1224 Editor.java:2765 +msgid "Decrease Indent" +msgstr "Decrease Indent" + +#: Editor.java:1234 +msgid "Find..." +msgstr "Find..." + +#: Editor.java:1249 +msgid "Find Next" +msgstr "Find Next" + +#: Editor.java:1259 +msgid "Find Previous" +msgstr "Find Previous" + +#: Editor.java:1269 +msgid "Use Selection For Find" +msgstr "Use Selection For Find" + +#: Editor.java:1872 +#, java-format +msgid "No reference available for \"{0}\"" +msgstr "No reference available for \"{0}\"" + +#: Editor.java:1874 +#, java-format +msgid "{0}.html" +msgstr "{0}.html" + +#: Editor.java:1911 Editor.java:1928 +msgid "Done compiling." +msgstr "Done compiling." + +#: Editor.java:2020 +#, java-format +msgid "Save changes to \"{0}\"? " +msgstr "Save changes to \"{0}\"? " + +#: Editor.java:2053 +msgid "" +" Do you " +"want to save changes to this sketch
before closing?

If you don't " +"save, your changes will be lost." +msgstr " Do you want to save changes to this sketch
before closing?

If you don't save, your changes will be lost." + +#: Editor.java:2064 +msgid "Don't Save" +msgstr "Don't Save" + +#: Editor.java:2136 +msgid "Bad file selected" +msgstr "Bad file selected" + +#: Editor.java:2137 +msgid "" +"Processing can only open its own sketches\n" +"and other files ending in .ino or .pde" +msgstr "Processing can only open its own sketches\nand other files ending in .ino or .pde" + +#: Editor.java:2147 +#, java-format +msgid "" +"The file \"{0}\" needs to be inside\n" +"a sketch folder named \"{1}\".\n" +"Create this folder, move the file, and continue?" +msgstr "The file \"{0}\" needs to be inside\na sketch folder named \"{1}\".\nCreate this folder, move the file, and continue?" + +#: Editor.java:2156 +msgid "Moving" +msgstr "Moving" + +#: Editor.java:2169 +#, java-format +msgid "A folder named \"{0}\" already exists. Can't open sketch." +msgstr "A folder named \"{0}\" already exists. Can't open sketch." + +#: Editor.java:2179 +msgid "Could not create the sketch folder." +msgstr "Could not create the sketch folder." + +#: Editor.java:2188 +msgid "Could not copy to a proper location." +msgstr "Could not copy to a proper location." + +#: Editor.java:2206 +msgid "Could not create the sketch." +msgstr "Could not create the sketch." + +#: Editor.java:2213 +#, java-format +msgid "{0} | Arduino {1}" +msgstr "{0} | Arduino {1}" + +#: Editor.java:2270 Editor.java:2308 +msgid "Saving..." +msgstr "Saving..." + +#: Editor.java:2275 Editor.java:2311 +msgid "Done Saving." +msgstr "Done Saving." + +#: Editor.java:2317 +msgid "Save Canceled." +msgstr "Save Canceled." + +#: Editor.java:2343 +#, java-format +msgid "" +"Serial port {0} not found.\n" +"Retry the upload with another serial port?" +msgstr "Serial port {0} not found.\nRetry the upload with another serial port?" + +#: Editor.java:2378 +msgid "Uploading to I/O Board..." +msgstr "Uploading to I/O Board..." + +#: Editor.java:2395 Editor.java:2431 +msgid "Done uploading." +msgstr "Done uploading." + +#: Editor.java:2403 Editor.java:2439 +msgid "Upload canceled." +msgstr "Upload canceled." + +#: Editor.java:2467 +msgid "Save changes before export?" +msgstr "Save changes before export?" + +#: Editor.java:2482 +msgid "Export canceled, changes must first be saved." +msgstr "Export canceled, changes must first be saved." + +#: Editor.java:2504 +msgid "Burning bootloader to I/O Board (this may take a minute)..." +msgstr "Burning bootloader to I/O Board (this may take a minute)..." + +#: Editor.java:2510 +msgid "Done burning bootloader." +msgstr "Done burning bootloader." + +#: Editor.java:2512 Editor.java:2516 Editor.java:2520 +msgid "Error while burning bootloader." +msgstr "Error while burning bootloader." + +#: Editor.java:2547 +msgid "Printing..." +msgstr "Printing..." + +#: Editor.java:2564 +msgid "Done printing." +msgstr "Done printing." + +#: Editor.java:2567 +msgid "Error while printing." +msgstr "Error while printing." + +#: Editor.java:2571 +msgid "Printing canceled." +msgstr "Printing canceled." + +#: Editor.java:2619 +#, java-format +msgid "Bad error line: {0}" +msgstr "Bad error line: {0}" + +#: Editor.java:2688 +msgid "Open URL" +msgstr "Open URL" #: EditorConsole.java:152 msgid "Console Error" -msgstr "" +msgstr "Console Error" #: EditorConsole.java:153 msgid "" "A problem occurred while trying to open the\n" "files used to store the console output." -msgstr "" +msgstr "A problem occurred while trying to open the\nfiles used to store the console output." -#: Base.java:184 -msgid "Non-fatal error while setting the Look & Feel." -msgstr "" - -#: Base.java:185 -msgid "The error message follows, however Arduino should run fine." -msgstr "" - -#: Base.java:220 -msgid "Problem Setting the Platform" -msgstr "" - -#: Base.java:221 +#: Theme.java:52 msgid "" -"An unknown error occurred while trying to load\n" -"platform-specific code for your machine." -msgstr "" - -#: Base.java:232 -msgid "Please install JDK 1.5 or later" -msgstr "" - -#: Base.java:233 -msgid "" -"Arduino requires a full JDK (not just a JRE)\n" -"to run. Please install JDK 1.5 or later.\n" -"More information can be found in the reference." -msgstr "" - -#: Base.java:257 -msgid "Sketchbook folder disappeared" -msgstr "" - -#: Base.java:258 -msgid "" -"The sketchbook folder no longer exists.\n" -"Arduino will switch to the default sketchbook\n" -"location, and create a new sketchbook folder if\n" -"necessary. Arduino will then stop talking about\n" -"himself in the third person." -msgstr "" - -#: Base.java:532 -msgid "Time for a Break" -msgstr "" - -#: Base.java:533 -msgid "" -"You've reached the limit for auto naming of new sketches\n" -"for the day. How about going for a walk instead?" -msgstr "" - -#: Base.java:537 -msgid "Sunshine" -msgstr "" - -#: Base.java:538 -msgid "No really, time for some fresh air for you." -msgstr "" - -#: Base.java:633 -msgid "Open an Arduino sketch..." -msgstr "" - -#: Base.java:772 -msgid "" -" Are you " -"sure you want to Quit?

Closing the last open sketch will quit Arduino." -msgstr "" - -#: Base.java:970 -msgid "Contributed" -msgstr "" - -#: Base.java:1095 -msgid "Sketch Does Not Exist" -msgstr "" - -#: Base.java:1096 -msgid "" -"The selected sketch no longer exists.\n" -"You may need to restart Arduino to update\n" -"the sketchbook menu." -msgstr "" - -#: Base.java:1125 -#, java-format -msgid "" -"The sketch \"{0}\" cannot be used.\n" -"Sketch names must contain only basic letters and numbers\n" -"(ASCII-only with no spaces, and it cannot start with a number).\n" -"To get rid of this message, remove the sketch from\n" -"{1}" -msgstr "" - -#: Base.java:1132 -msgid "Ignoring sketch with bad name" -msgstr "" - -#: Base.java:1202 -#, java-format -msgid "" -"The library \"{0}\" cannot be used.\n" -"Library names must contain only basic letters and numbers.\n" -"(ASCII only and no spaces, and it cannot start with a number)" -msgstr "" - -#: Base.java:1207 -msgid "Ignoring bad library name" -msgstr "" - -#: Base.java:1432 -msgid "Problem getting data folder" -msgstr "" - -#: Base.java:1433 -msgid "Error getting the Arduino data folder." -msgstr "" - -#: Base.java:1440 -msgid "Settings issues" -msgstr "" - -#: Base.java:1441 -msgid "" -"Arduino cannot run because it could not\n" -"create a folder to store your settings." -msgstr "" - -#: Base.java:1602 -msgid "You forgot your sketchbook" -msgstr "" - -#: Base.java:1603 -msgid "" -"Arduino cannot run because it could not\n" -"create a folder to store your sketchbook." -msgstr "" - -#: Base.java:1623 -msgid "Select (or create new) folder for sketches..." -msgstr "" - -#: Base.java:1647 -msgid "Problem Opening URL" -msgstr "" - -#: Base.java:1648 -#, java-format -msgid "" -"Could not open the URL\n" -"{0}" -msgstr "" - -#: Base.java:1671 -msgid "Problem Opening Folder" -msgstr "" - -#: Base.java:1672 -#, java-format -msgid "" -"Could not open the folder\n" -"{0}" -msgstr "" - -#: Base.java:1785 -msgid "Guide_MacOSX.html" -msgstr "" - -#: Base.java:1787 -msgid "Guide_Windows.html" -msgstr "" - -#: Base.java:1789 -msgid "http://www.arduino.cc/playground/Learning/Linux" -msgstr "" - -#: Base.java:1794 -msgid "index.html" -msgstr "" - -#: Base.java:1799 -msgid "Guide_Environment.html" -msgstr "" - -#: Base.java:1804 -msgid "environment" -msgstr "" - -#: Base.java:1804 -msgid "platforms.html" -msgstr "" - -#: Base.java:1809 -msgid "Guide_Troubleshooting.html" -msgstr "" - -#: Base.java:1814 -msgid "FAQ.html" -msgstr "" - -#: Base.java:1826 -msgid "Message" -msgstr "" - -#: Base.java:1842 -msgid "Warning" -msgstr "" - -#: Base.java:2196 -#, java-format -msgid "Could not remove old version of {0}" -msgstr "" - -#: Base.java:2206 -#, java-format -msgid "Could not replace {0}" -msgstr "" - -#: Base.java:2247 Base.java:2270 -#, java-format -msgid "Could not delete {0}" -msgstr "" - -#: EditorHeader.java:292 -msgid "New Tab" -msgstr "" - -#: EditorHeader.java:300 -msgid "Rename" -msgstr "" - -#: EditorHeader.java:326 -msgid "Previous Tab" -msgstr "" - -#: EditorHeader.java:340 -msgid "Next Tab" -msgstr "" - -#: EditorToolbar.java:41 EditorToolbar.java:46 -msgid "Verify" -msgstr "" - -#: EditorToolbar.java:41 -msgid "Open" -msgstr "" - -#: EditorToolbar.java:46 -msgid "New Editor Window" -msgstr "" - -#: EditorToolbar.java:46 -msgid "Open in Another Window" -msgstr "" +"Could not read color theme settings.\n" +"You'll need to reinstall Processing." +msgstr "Could not read color theme settings.\nYou'll need to reinstall Processing." #: Platform.java:167 msgid "No launcher available" -msgstr "" +msgstr "No launcher available" #: Platform.java:168 msgid "" "Unspecified platform, no launcher available.\n" "To enable opening URLs or folders, add a \n" "\"launcher=/path/to/app\" line to preferences.txt" -msgstr "" +msgstr "Unspecified platform, no launcher available.\nTo enable opening URLs or folders, add a \n\"launcher=/path/to/app\" line to preferences.txt" -#: Theme.java:52 +#: tools/format/src/AutoFormat.java:54 tools/AutoFormat.java:916 +msgid "No changes necessary for Auto Format." +msgstr "No changes necessary for Auto Format." + +#: tools/AutoFormat.java:91 +msgid "Auto Format" +msgstr "Auto Format" + +#: tools/AutoFormat.java:922 +msgid "Auto Format Canceled: Too many right parentheses." +msgstr "Auto Format Canceled: Too many right parentheses." + +#: tools/AutoFormat.java:925 +msgid "Auto Format Canceled: Too many left parentheses." +msgstr "Auto Format Canceled: Too many left parentheses." + +#: tools/AutoFormat.java:931 +msgid "Auto Format Canceled: Too many right curly braces." +msgstr "Auto Format Canceled: Too many right curly braces." + +#: tools/AutoFormat.java:934 +msgid "Auto Format Canceled: Too many left curly braces." +msgstr "Auto Format Canceled: Too many left curly braces." + +#: tools/AutoFormat.java:944 +msgid "Auto Format finished." +msgstr "Auto Format finished." + +#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 +#: tools/FixEncoding.java:79 +msgid "Fix Encoding & Reload" +msgstr "Fix Encoding & Reload" + +#: tools/FixEncoding.java:57 +msgid "Discard all changes and reload sketch?" +msgstr "Discard all changes and reload sketch?" + +#: tools/FixEncoding.java:77 msgid "" -"Could not read color theme settings.\n" -"You'll need to reinstall Processing." -msgstr "" +"An error occurred while trying to fix the file encoding.\n" +"Do not attempt to save this sketch as it may overwrite\n" +"the old version. Use Open to re-open the sketch and try again.\n" +msgstr "An error occurred while trying to fix the file encoding.\nDo not attempt to save this sketch as it may overwrite\nthe old version. Use Open to re-open the sketch and try again.\n" -#: Preferences.java:80 -msgid "Browse" -msgstr "" +#: tools/Archiver.java:48 +msgid "Archive Sketch" +msgstr "Archive Sketch" -#: Preferences.java:83 -msgid "System Default" -msgstr "" +#: tools/Archiver.java:74 +msgid "Couldn't archive sketch" +msgstr "Couldn't archive sketch" -#: Preferences.java:84 -msgid "Arabic" -msgstr "" - -#: Preferences.java:85 -msgid "Aragonese" -msgstr "" - -#: Preferences.java:86 -msgid "Catalan" -msgstr "" - -#: Preferences.java:87 -msgid "Chinese Simplified" -msgstr "" - -#: Preferences.java:88 -msgid "Chinese Traditional" -msgstr "" - -#: Preferences.java:89 -msgid "Danish" -msgstr "" - -#: Preferences.java:90 -msgid "Dutch" -msgstr "" - -#: Preferences.java:91 -msgid "English" -msgstr "" - -#: Preferences.java:92 -msgid "Estonian" -msgstr "" - -#: Preferences.java:93 -msgid "French" -msgstr "" - -#: Preferences.java:94 -msgid "Filipino" -msgstr "" - -#: Preferences.java:95 -msgid "Galician" -msgstr "" - -#: Preferences.java:96 -msgid "German" -msgstr "" - -#: Preferences.java:97 -msgid "Greek" -msgstr "" - -#: Preferences.java:98 -msgid "Hungarian" -msgstr "" - -#: Preferences.java:99 -msgid "Indonesian" -msgstr "" - -#: Preferences.java:100 -msgid "Italian" -msgstr "" - -#: Preferences.java:101 -msgid "Japanese" -msgstr "" - -#: Preferences.java:102 -msgid "Korean" -msgstr "" - -#: Preferences.java:103 -msgid "Latvian" -msgstr "" - -#: Preferences.java:104 -msgid "Lithuaninan" -msgstr "" - -#: Preferences.java:105 -msgid "Persian" -msgstr "" - -#: Preferences.java:106 -msgid "Polish" -msgstr "" - -#: Preferences.java:107 Preferences.java:108 -msgid "Portuguese" -msgstr "" - -#: Preferences.java:109 -msgid "Romanian" -msgstr "" - -#: Preferences.java:110 -msgid "Russian" -msgstr "" - -#: Preferences.java:111 -msgid "Spanish" -msgstr "" - -#: Preferences.java:210 +#: tools/Archiver.java:75 msgid "" -"Could not read default settings.\n" -"You'll need to reinstall Arduino." -msgstr "" +"Archiving the sketch has been canceled because\n" +"the sketch couldn't save properly." +msgstr "Archiving the sketch has been canceled because\nthe sketch couldn't save properly." -#: Preferences.java:242 -#, java-format -msgid "Could not read preferences from {0}" -msgstr "" +#: tools/Archiver.java:109 +msgid "Archive sketch as:" +msgstr "Archive sketch as:" -#: Preferences.java:261 -msgid "Error reading preferences" -msgstr "" - -#: Preferences.java:263 -#, java-format -msgid "" -"Error reading the preferences file. Please delete (or move)\n" -"{0} and restart Arduino." -msgstr "" - -#: Preferences.java:299 -msgid "Sketchbook location:" -msgstr "" - -#: Preferences.java:314 -msgid "Select new sketchbook location" -msgstr "" - -#: Preferences.java:337 -msgid "Editor language: " -msgstr "" - -#: Preferences.java:342 Preferences.java:358 -msgid " (requires restart of Arduino)" -msgstr "" - -#: Preferences.java:354 -msgid "Editor font size: " -msgstr "" - -#: Preferences.java:371 -msgid "Show verbose output during: " -msgstr "" - -#: Preferences.java:373 -msgid "compilation " -msgstr "" - -#: Preferences.java:375 -msgid "upload" -msgstr "" - -#: Preferences.java:384 -msgid "Verify code after upload" -msgstr "" - -#: Preferences.java:393 -msgid "Use external editor" -msgstr "" - -#: Preferences.java:403 -msgid "Check for updates on startup" -msgstr "" - -#: Preferences.java:412 -msgid "Update sketch files to new extension on save (.pde -> .ino)" -msgstr "" - -#: Preferences.java:423 -msgid "Automatically associate .ino files with Arduino" -msgstr "" - -#: Preferences.java:433 -msgid "More preferences can be edited directly in the file" -msgstr "" - -#: Preferences.java:462 -msgid "(edit only when Arduino is not running)" -msgstr "" - -#: Preferences.java:609 -#, java-format -msgid "ignoring invalid font size {0}" -msgstr "" +#: tools/Archiver.java:139 +msgid "Archive sketch canceled." +msgstr "Archive sketch canceled." diff --git a/app/src/processing/app/Resources_en.properties b/app/src/processing/app/Resources_en.properties index 119356cf9..66b121c60 100644 --- a/app/src/processing/app/Resources_en.properties +++ b/app/src/processing/app/Resources_en.properties @@ -1,1031 +1,1079 @@ # English translations for PACKAGE package. # Copyright (C) 2012 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. -# David A. Mellis <>, 2012. # -!=Project-Id-Version\: PACKAGE VERSION\nReport-Msgid-Bugs-To\: \nPOT-Creation-Date\: 2012-03-29 10\:24-0400\nPO-Revision-Date\: 2012-03-29 10\:24-0400\nLast-Translator\: David A. Mellis <>\nLanguage-Team\: English\nLanguage\: en\nMIME-Version\: 1.0\nContent-Type\: text/plain; charset\=UTF-8\nContent-Transfer-Encoding\: 8bit\nPlural-Forms\: nplurals\=2; plural\=(n \!\= 1);\n +# Translators: +!=Project-Id-Version\: Arduino IDE 1.5\nReport-Msgid-Bugs-To\: \nPOT-Creation-Date\: 2012-03-29 10\:24-0400\nPO-Revision-Date\: 2012-10-31 15\:17+0000\nLast-Translator\: Deiv Xile \nLanguage-Team\: English\nMIME-Version\: 1.0\nContent-Type\: text/plain; charset\=UTF-8\nContent-Transfer-Encoding\: 8bit\nLanguage\: en\nPlural-Forms\: nplurals\=2; plural\=(n \!\= 1);\n -#: Editor.java:366 -!No\ files\ were\ added\ to\ the\ sketch.= +#: Base.java:191 +Non-fatal\ error\ while\ setting\ the\ Look\ &\ Feel.=Non-fatal error while setting the Look & Feel. -#: Editor.java:369 Sketch.java:996 -!One\ file\ added\ to\ the\ sketch.= +#: Base.java:192 +The\ error\ message\ follows,\ however\ Arduino\ should\ run\ fine.=The error message follows, however Arduino should run fine. -#: Editor.java:373 +#: Base.java:227 +Problem\ Setting\ the\ Platform=Problem Setting the Platform + +#: Base.java:228 +An\ unknown\ error\ occurred\ while\ trying\ to\ load\nplatform-specific\ code\ for\ your\ machine.=An unknown error occurred while trying to load\nplatform-specific code for your machine. + +#: Base.java:239 +Please\ install\ JDK\ 1.5\ or\ later=Please install JDK 1.5 or later + +#: Base.java:240 +Arduino\ requires\ a\ full\ JDK\ (not\ just\ a\ JRE)\nto\ run.\ Please\ install\ JDK\ 1.5\ or\ later.\nMore\ information\ can\ be\ found\ in\ the\ reference.=Arduino requires a full JDK (not just a JRE)\nto run. Please install JDK 1.5 or later.\nMore information can be found in the reference. + +#: Base.java:258 +Sketchbook\ folder\ disappeared=Sketchbook folder disappeared + +#: Base.java:259 +The\ sketchbook\ folder\ no\ longer\ exists.\nArduino\ will\ switch\ to\ the\ default\ sketchbook\nlocation,\ and\ create\ a\ new\ sketchbook\ folder\ if\nnecessary.\ Arduino\ will\ then\ stop\ talking\ about\nhimself\ in\ the\ third\ person.=The sketchbook folder no longer exists.\nArduino will switch to the default sketchbook\nlocation, and create a new sketchbook folder if\nnecessary. Arduino will then stop talking about\nhimself in the third person. + +#: Base.java:535 +Time\ for\ a\ Break=Time for a Break + +#: Base.java:536 +You've\ reached\ the\ limit\ for\ auto\ naming\ of\ new\ sketches\nfor\ the\ day.\ How\ about\ going\ for\ a\ walk\ instead?=You've reached the limit for auto naming of new sketches\nfor the day. How about going for a walk instead? + +#: Base.java:540 +Sunshine=Sunshine + +#: Base.java:541 +No\ really,\ time\ for\ some\ fresh\ air\ for\ you.=No really, time for some fresh air for you. + +#: Base.java:636 +Open\ an\ Arduino\ sketch...=Open an Arduino sketch... + +#: Base.java:773 +\ \ b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }\ Are\ you\ sure\ you\ want\ to\ Quit?

Closing\ the\ last\ open\ sketch\ will\ quit\ Arduino.= Are you sure you want to Quit?

Closing the last open sketch will quit Arduino. + +#: Base.java:783 Editor.java:593 +Quit=Quit + +#: Base.java:903 Editor.java:501 +Open...=Open... + +#: Base.java:963 +Add\ Library...=Add Library... + +#: Base.java:1054 Base.java:2674 #, java-format -!{0}\ files\ added\ to\ the\ sketch.= +The\ library\ "{0}"\ cannot\ be\ used.\nLibrary\ names\ must\ contain\ only\ basic\ letters\ and\ numbers.\n(ASCII\ only\ and\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number)=The library "{0}" cannot be used.\nLibrary names must contain only basic letters and numbers.\n(ASCII only and no spaces, and it cannot start with a number) -#: Editor.java:484 -!File= +#: Base.java:1058 +Ignoring\ bad\ library\ name=Ignoring bad library name -#: Editor.java:486 EditorToolbar.java:41 -!New= +#: Base.java:1411 +Sketch\ Does\ Not\ Exist=Sketch Does Not Exist -#: Editor.java:494 Base.java:903 -!Open...= +#: Base.java:1412 +The\ selected\ sketch\ no\ longer\ exists.\nYou\ may\ need\ to\ restart\ Arduino\ to\ update\nthe\ sketchbook\ menu.=The selected sketch no longer exists.\nYou may need to restart Arduino to update\nthe sketchbook menu. -#: Editor.java:503 -!Sketchbook= - -#: Editor.java:509 -!Examples= - -#: Editor.java:514 Editor.java:1977 -!Close= - -#: Editor.java:522 Editor.java:2017 Editor.java:2421 EditorToolbar.java:41 -#: EditorToolbar.java:46 -!Save= - -#: Editor.java:530 -!Save\ As...= - -#: Editor.java:538 EditorToolbar.java:41 -!Upload= - -#: Editor.java:546 EditorToolbar.java:46 -!Upload\ Using\ Programmer= - -#: Editor.java:556 -!Page\ Setup= - -#: Editor.java:564 -!Print= - -#: Editor.java:576 Preferences.java:279 -!Preferences= - -#: Editor.java:586 Base.java:782 -!Quit= - -#: Editor.java:600 -!Sketch= - -#: Editor.java:602 -!Verify\ /\ Compile= - -#: Editor.java:629 -!Import\ Library...= - -#: Editor.java:634 -!Show\ Sketch\ Folder= - -#: Editor.java:643 -!Add\ File...= - -#: Editor.java:656 -!Tools= - -#: Editor.java:662 EditorToolbar.java:41 EditorToolbar.java:46 -!Serial\ Monitor= - -#: Editor.java:682 -!Board= - -#: Editor.java:690 -!Serial\ Port= - -#: Editor.java:695 -!Programmer= - -#: Editor.java:699 -!Burn\ Bootloader= - -#: Editor.java:923 -!serialMenu\ is\ null= - -#: Editor.java:927 Editor.java:934 -!name\ is\ null= - -#: Editor.java:986 -!error\ retrieving\ port\ list= - -#: Editor.java:1002 -!Help= - -#: Editor.java:1041 -!Getting\ Started= - -#: Editor.java:1049 -!Environment= - -#: Editor.java:1057 -!Troubleshooting= - -#: Editor.java:1065 -!Reference= - -#: Editor.java:1073 Editor.java:2728 -!Find\ in\ Reference= - -#: Editor.java:1083 -!Frequently\ Asked\ Questions= - -#: Editor.java:1091 -!Visit\ Arduino.cc= - -#: Editor.java:1094 -!http\://arduino.cc/= - -#: Editor.java:1102 -!About\ Arduino= - -#: Editor.java:1116 -!Edit= - -#: Editor.java:1119 Editor.java:1341 -!Undo= - -#: Editor.java:1124 Editor.java:1126 Editor.java:1376 -!Redo= - -#: Editor.java:1135 Editor.java:2652 -!Cut= - -#: Editor.java:1143 Editor.java:2660 -!Copy= - -#: Editor.java:1151 Editor.java:2668 -!Copy\ for\ Forum= - -#: Editor.java:1163 Editor.java:2676 -!Copy\ as\ HTML= - -#: Editor.java:1175 Editor.java:2684 -!Paste= - -#: Editor.java:1184 Editor.java:2692 -!Select\ All= - -#: Editor.java:1194 Editor.java:2702 -!Comment/Uncomment= - -#: Editor.java:1202 Editor.java:2710 -!Increase\ Indent= - -#: Editor.java:1210 Editor.java:2718 -!Decrease\ Indent= - -#: Editor.java:1220 -!Find...= - -#: Editor.java:1235 -!Find\ Next= - -#: Editor.java:1245 -!Find\ Previous= - -#: Editor.java:1255 -!Use\ Selection\ For\ Find= - -#: Editor.java:1823 +#: Base.java:1430 #, java-format -!No\ reference\ available\ for\ "{0}"= +The\ sketch\ "{0}"\ cannot\ be\ used.\nSketch\ names\ must\ contain\ only\ basic\ letters\ and\ numbers\n(ASCII-only\ with\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number).\nTo\ get\ rid\ of\ this\ message,\ remove\ the\ sketch\ from\n{1}=The sketch "{0}" cannot be used.\nSketch names must contain only basic letters and numbers\n(ASCII-only with no spaces, and it cannot start with a number).\nTo get rid of this message, remove the sketch from\n{1} -#: Editor.java:1826 +#: Base.java:1436 +Ignoring\ sketch\ with\ bad\ name=Ignoring sketch with bad name + +#: Base.java:1673 +Problem\ getting\ data\ folder=Problem getting data folder + +#: Base.java:1674 +Error\ getting\ the\ Arduino\ data\ folder.=Error getting the Arduino data folder. + +#: Base.java:1681 +Settings\ issues=Settings issues + +#: Base.java:1682 +Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ settings.=Arduino cannot run because it could not\ncreate a folder to store your settings. + +#: Base.java:1851 +For\ information\ on\ installing\ libraries,\ see\:\ http\://arduino.cc/en/Guide/Libraries\n=For information on installing libraries, see\: http\://arduino.cc/en/Guide/Libraries\n + +#: Base.java:1888 +You\ forgot\ your\ sketchbook=You forgot your sketchbook + +#: Base.java:1889 +Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ sketchbook.=Arduino cannot run because it could not\ncreate a folder to store your sketchbook. + +#: Base.java:1909 +Select\ (or\ create\ new)\ folder\ for\ sketches...=Select (or create new) folder for sketches... + +#: Base.java:1933 +Problem\ Opening\ URL=Problem Opening URL + +#: Base.java:1934 #, java-format -!{0}.html= +Could\ not\ open\ the\ URL\n{0}=Could not open the URL\n{0} -#: Editor.java:1843 Sketch.java:1647 -!Compiling\ sketch...= +#: Base.java:1957 +Problem\ Opening\ Folder=Problem Opening Folder -#: Editor.java:1864 Editor.java:1881 -!Done\ compiling.= - -#: Editor.java:1973 +#: Base.java:1958 #, java-format -!Save\ changes\ to\ "{0}"?\ \ = +Could\ not\ open\ the\ folder\n{0}=Could not open the folder\n{0} -#: Editor.java:2006 -!\ \ b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }\ Do\ you\ want\ to\ save\ changes\ to\ this\ sketch
\ before\ closing?

If\ you\ don't\ save,\ your\ changes\ will\ be\ lost.= +#: Base.java:2071 +Guide_MacOSX.html=Guide_MacOSX.html -#: Editor.java:2017 Editor.java:2098 Editor.java:2418 Sketch.java:589 -#: Sketch.java:741 Sketch.java:1046 Preferences.java:78 -!Cancel= +#: Base.java:2073 +Guide_Windows.html=Guide_Windows.html -#: Editor.java:2017 -!Don't\ Save= +#: Base.java:2075 +http\://www.arduino.cc/playground/Learning/Linux=http\://www.arduino.cc/playground/Learning/Linux -#: Editor.java:2089 -!Bad\ file\ selected= +#: Base.java:2080 +index.html=index.html -#: Editor.java:2090 -!Processing\ can\ only\ open\ its\ own\ sketches\nand\ other\ files\ ending\ in\ .ino\ or\ .pde= +#: Base.java:2085 +Guide_Environment.html=Guide_Environment.html -#: Editor.java:2098 Editor.java:2418 Sketch.java:589 Sketch.java:741 -#: Sketch.java:1046 Preferences.java:79 -!OK= +#: Base.java:2090 +environment=environment -#: Editor.java:2100 +#: Base.java:2090 +platforms.html=platforms.html + +#: Base.java:2095 +Guide_Troubleshooting.html=Guide_Troubleshooting.html + +#: Base.java:2100 +FAQ.html=FAQ.html + +#: Base.java:2112 +Message=Message + +#: Base.java:2128 +Warning=Warning + +#: Base.java:2147 Preferences.java:256 Sketch.java:475 Sketch.java:481 +#: Sketch.java:496 Sketch.java:503 Sketch.java:526 Sketch.java:543 +#: Editor.java:2167 Editor.java:2178 Editor.java:2188 Editor.java:2206 +Error=Error + +#: Base.java:2482 #, java-format -!The\ file\ "{0}"\ needs\ to\ be\ inside\na\ sketch\ folder\ named\ "{1}".\nCreate\ this\ folder,\ move\ the\ file,\ and\ continue?= +Could\ not\ remove\ old\ version\ of\ {0}=Could not remove old version of {0} -#: Editor.java:2109 -!Moving= - -#: Editor.java:2120 Editor.java:2131 Editor.java:2141 Editor.java:2159 -#: Sketch.java:479 Sketch.java:485 Sketch.java:500 Sketch.java:507 -#: Sketch.java:530 Sketch.java:547 Base.java:1861 Preferences.java:240 -!Error= - -#: Editor.java:2122 +#: Base.java:2492 #, java-format -!A\ folder\ named\ "{0}"\ already\ exists.\ Can't\ open\ sketch.= +Could\ not\ replace\ {0}=Could not replace {0} -#: Editor.java:2132 -!Could\ not\ create\ the\ sketch\ folder.= - -#: Editor.java:2141 -!Could\ not\ copy\ to\ a\ proper\ location.= - -#: Editor.java:2159 -!Could\ not\ create\ the\ sketch.= - -#: Editor.java:2166 +#: Base.java:2533 Base.java:2556 #, java-format -!{0}\ |\ Arduino\ {1}= +Could\ not\ delete\ {0}=Could not delete {0} -#: Editor.java:2223 Editor.java:2261 -!Saving...= +#: Base.java:2636 +Select\ a\ zip\ file\ or\ a\ folder\ containing\ the\ library\ you'd\ like\ to\ add=Select a zip file or a folder containing the library you'd like to add -#: Editor.java:2228 Editor.java:2264 -!Done\ Saving.= +#: Base.java:2638 +ZIP\ files\ or\ folders=ZIP files or folders -#: Editor.java:2270 -!Save\ Canceled.= +#: Base.java:2661 +Zip\ doesn't\ contain\ a\ library=Zip doesn't contain a library -#: Editor.java:2296 +#: Base.java:2683 +Not\ a\ valid\ library\:\ no\ header\ files\ found=Not a valid library\: no header files found + +#: Base.java:2690 #, java-format -!Serial\ port\ {0}\ not\ found.\nRetry\ the\ upload\ with\ another\ serial\ port?= +A\ library\ named\ {0}\ already\ exists=A library named {0} already exists -#: Editor.java:2331 -!Uploading\ to\ I/O\ Board...= - -#: Editor.java:2348 Editor.java:2384 -!Done\ uploading.= - -#: Editor.java:2356 Editor.java:2392 -!Upload\ canceled.= - -#: Editor.java:2420 -!Save\ changes\ before\ export?= - -#: Editor.java:2435 -!Export\ canceled,\ changes\ must\ first\ be\ saved.= - -#: Editor.java:2457 -!Burning\ bootloader\ to\ I/O\ Board\ (this\ may\ take\ a\ minute)...= - -#: Editor.java:2463 -!Done\ burning\ bootloader.= - -#: Editor.java:2465 Editor.java:2469 Editor.java:2473 -!Error\ while\ burning\ bootloader.= - -#: Editor.java:2500 -!Printing...= - -#: Editor.java:2517 -!Done\ printing.= - -#: Editor.java:2520 -!Error\ while\ printing.= - -#: Editor.java:2524 -!Printing\ canceled.= - -#: Editor.java:2572 -#, java-format -!Bad\ error\ line\:\ {0}= - -#: Editor.java:2641 -!Open\ URL= - -#: UpdateCheck.java:53 -!http\://www.arduino.cc/latest.txt= - -#: UpdateCheck.java:103 -!A\ new\ version\ of\ Arduino\ is\ available,\nwould\ you\ like\ to\ visit\ the\ Arduino\ download\ page?= - -#: UpdateCheck.java:108 Preferences.java:76 -!Yes= - -#: UpdateCheck.java:108 Preferences.java:77 -!No= - -#: UpdateCheck.java:111 -!Update= - -#: UpdateCheck.java:118 -!http\://www.arduino.cc/en/Main/Software= - -#: FindReplace.java:80 -!Find\:= - -#: FindReplace.java:81 -!Replace\ with\:= - -#: FindReplace.java:96 -!Ignore\ Case= - -#: FindReplace.java:105 -!Wrap\ Around= - -#: FindReplace.java:120 FindReplace.java:131 -!Replace\ All= - -#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1050 -!Replace= - -#: FindReplace.java:122 FindReplace.java:129 -!Replace\ &\ Find= - -#: FindReplace.java:123 FindReplace.java:128 -!Previous= - -#: FindReplace.java:124 FindReplace.java:127 -!Find= - -#: SerialMonitor.java:93 -!Send= - -#: SerialMonitor.java:110 -!Autoscroll= - -#: SerialMonitor.java:112 -!No\ line\ ending= - -#: SerialMonitor.java:112 -!Newline= - -#: SerialMonitor.java:112 -!Carriage\ return= - -#: SerialMonitor.java:112 -!Both\ NL\ &\ CR= - -#: SerialMonitor.java:130 SerialMonitor.java:133 -!\ baud= - -#: Serial.java:147 -#, java-format -!Serial\ port\ ''{0}''\ already\ in\ use.\ Try\ quiting\ any\ programs\ that\ may\ be\ using\ it.= - -#: Serial.java:154 -#, java-format -!Error\ opening\ serial\ port\ ''{0}''.= - -#: Serial.java:167 -#, java-format -!Serial\ port\ ''{0}''\ not\ found.\ Did\ you\ select\ the\ right\ one\ from\ the\ Tools\ >\ Serial\ Port\ menu?= - -#: Serial.java:424 -#, java-format -!readBytesUntil()\ byte\ buffer\ is\ too\ small\ for\ the\ {0}\ bytes\ up\ to\ and\ including\ char\ {1}= - -#: Serial.java:567 -#, java-format -!Error\ inside\ Serial.{0}()= - -#: tools/AutoFormat.java:91 -!Auto\ Format= - -#: tools/AutoFormat.java:913 tools/format/src/AutoFormat.java:54 -!No\ changes\ necessary\ for\ Auto\ Format.= - -#: tools/AutoFormat.java:919 -!Auto\ Format\ Canceled\:\ Too\ many\ right\ parentheses.= - -#: tools/AutoFormat.java:922 -!Auto\ Format\ Canceled\:\ Too\ many\ left\ parentheses.= - -#: tools/AutoFormat.java:928 -!Auto\ Format\ Canceled\:\ Too\ many\ right\ curly\ braces.= - -#: tools/AutoFormat.java:931 -!Auto\ Format\ Canceled\:\ Too\ many\ left\ curly\ braces.= - -#: tools/AutoFormat.java:941 -!Auto\ Format\ finished.= - -#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 -#: tools/FixEncoding.java:79 -!Fix\ Encoding\ &\ Reload= - -#: tools/FixEncoding.java:57 -!Discard\ all\ changes\ and\ reload\ sketch?= - -#: tools/FixEncoding.java:77 -!An\ error\ occurred\ while\ trying\ to\ fix\ the\ file\ encoding.\nDo\ not\ attempt\ to\ save\ this\ sketch\ as\ it\ may\ overwrite\nthe\ old\ version.\ Use\ Open\ to\ re-open\ the\ sketch\ and\ try\ again.\n= - -#: tools/Archiver.java:48 -!Archive\ Sketch= - -#: tools/Archiver.java:59 -!yyMMdd= - -#: tools/Archiver.java:74 -!Couldn't\ archive\ sketch= - -#: tools/Archiver.java:75 -!Archiving\ the\ sketch\ has\ been\ canceled\ because\nthe\ sketch\ couldn't\ save\ properly.= - -#: tools/Archiver.java:109 -!Archive\ sketch\ as\:= - -#: tools/Archiver.java:139 -!Archive\ sketch\ canceled.= +#: Base.java:2699 +Library\ added\ to\ your\ libraries.\ Check\ "Import\ library"\ menu=Library added to your libraries. Check "Import library" menu #: SketchCode.java:83 #, java-format -!Error\ while\ loading\ code\ {0}= +Error\ while\ loading\ code\ {0}=Error while loading code {0} #: SketchCode.java:258 #, java-format -!"{0}"\ contains\ unrecognized\ characters.If\ this\ code\ was\ created\ with\ an\ older\ version\ of\ Processing,you\ may\ need\ to\ use\ Tools\ ->\ Fix\ Encoding\ &\ Reload\ to\ updatethe\ sketch\ to\ use\ UTF-8\ encoding.\ If\ not,\ you\ may\ need\ todelete\ the\ bad\ characters\ to\ get\ rid\ of\ this\ warning.= +"{0}"\ contains\ unrecognized\ characters.If\ this\ code\ was\ created\ with\ an\ older\ version\ of\ Processing,you\ may\ need\ to\ use\ Tools\ ->\ Fix\ Encoding\ &\ Reload\ to\ updatethe\ sketch\ to\ use\ UTF-8\ encoding.\ If\ not,\ you\ may\ need\ todelete\ the\ bad\ characters\ to\ get\ rid\ of\ this\ warning.="{0}" contains unrecognized characters.If this code was created with an older version of Processing,you may need to use Tools -> Fix Encoding & Reload to updatethe sketch to use UTF-8 encoding. If not, you may need todelete the bad characters to get rid of this warning. -#: Sketch.java:278 Sketch.java:307 Sketch.java:581 Sketch.java:970 -!Sketch\ is\ Read-Only= +#: FindReplace.java:80 +Find\:=Find\: -#: Sketch.java:279 Sketch.java:308 Sketch.java:582 Sketch.java:971 -!Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ the\ sketch\ in\ another\ location,\nand\ try\ again.= +#: FindReplace.java:81 +Replace\ with\:=Replace with\: -#: Sketch.java:286 -!Name\ for\ new\ file\:= +#: FindReplace.java:96 +Ignore\ Case=Ignore Case -#: Sketch.java:298 -!Sketch\ is\ Untitled= +#: FindReplace.java:105 +Wrap\ Around=Wrap Around -#: Sketch.java:299 -!How\ about\ saving\ the\ sketch\ first\ \nbefore\ trying\ to\ rename\ it?= +#: FindReplace.java:120 FindReplace.java:131 +Replace\ All=Replace All -#: Sketch.java:359 Sketch.java:366 Sketch.java:377 -!Problem\ with\ rename= +#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1046 +Replace=Replace -#: Sketch.java:360 -!The\ name\ cannot\ start\ with\ a\ period.= +#: FindReplace.java:122 FindReplace.java:129 +Replace\ &\ Find=Replace & Find -#: Sketch.java:368 -#, java-format -!".{0}"\ is\ not\ a\ valid\ extension.= +#: FindReplace.java:123 FindReplace.java:128 +Previous=Previous -#: Sketch.java:378 -!The\ main\ file\ can't\ use\ an\ extension.\n(It\ may\ be\ time\ for\ your\ to\ graduate\ to\ a\n"real"\ programming\ environment)= - -#: Sketch.java:400 Sketch.java:414 Sketch.java:423 Sketch.java:863 -!Nope= - -#: Sketch.java:402 -#, java-format -!A\ file\ named\ "{0}"\ already\ exists\ in\ "{1}"= - -#: Sketch.java:415 -!You\ can't\ have\ a\ .cpp\ file\ with\ the\ same\ name\ as\ the\ sketch.= - -#: Sketch.java:425 -!You\ can't\ rename\ the\ sketch\ to\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.= - -#: Sketch.java:459 -!Cannot\ Rename= - -#: Sketch.java:461 -#, java-format -!Sorry,\ a\ sketch\ (or\ folder)\ named\ "{0}"\ already\ exists.= - -#: Sketch.java:479 -!Could\ not\ rename\ the\ sketch.\ (0)= - -#: Sketch.java:487 Sketch.java:532 -#, java-format -!Could\ not\ rename\ "{0}"\ to\ "{1}"= - -#: Sketch.java:500 -!Could\ not\ rename\ the\ sketch.\ (1)= - -#: Sketch.java:507 -!Could\ not\ rename\ the\ sketch.\ (2)= - -#: Sketch.java:544 -!createNewFile()\ returned\ false= - -#: Sketch.java:591 -!Are\ you\ sure\ you\ want\ to\ delete\ this\ sketch?= - -#: Sketch.java:592 -#, java-format -!Are\ you\ sure\ you\ want\ to\ delete\ "{0}"?= - -#: Sketch.java:595 EditorHeader.java:314 -!Delete= - -#: Sketch.java:620 -!Couldn't\ do\ it= - -#: Sketch.java:621 -#, java-format -!Could\ not\ delete\ "{0}".= - -#: Sketch.java:651 -!removeCode\:\ internal\ error..\ could\ not\ find\ code= - -#: Sketch.java:724 -!Sketch\ is\ read-only= - -#: Sketch.java:725 -!Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ this\ sketch\ to\ another\ location.= - -#: Sketch.java:743 -!In\ Arduino\ 1.0,\ the\ default\ file\ extension\ has\ changed\nfrom\ .pde\ to\ .ino.\ \ New\ sketches\ (including\ those\ created\nby\ "Save-As"\ will\ use\ the\ new\ extension.\ \ The\ extension\nof\ existing\ sketches\ will\ be\ updated\ on\ save,\ but\ you\ can\ndisable\ this\ in\ the\ Preferences\ dialog.\n\nSave\ sketch\ and\ update\ its\ extension?= - -#: Sketch.java:750 -!.pde\ ->\ .ino= - -#: Sketch.java:829 -!Save\ sketch\ folder\ as...= - -#: Sketch.java:865 -!You\ can't\ save\ the\ sketch\ as\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.= - -#: Sketch.java:886 -!How\ very\ Borges\ of\ you= - -#: Sketch.java:887 -!You\ cannot\ save\ the\ sketch\ into\ a\ folder\ninside\ itself.\ This\ would\ go\ on\ forever.= - -#: Sketch.java:979 -!Select\ an\ image\ or\ other\ data\ file\ to\ copy\ to\ your\ sketch= - -#: Sketch.java:1047 -#, java-format -!Replace\ the\ existing\ version\ of\ {0}?= - -#: Sketch.java:1069 Sketch.java:1092 -!Error\ adding\ file= - -#: Sketch.java:1070 -#, java-format -!Could\ not\ delete\ the\ existing\ ''{0}''\ file.= - -#: Sketch.java:1078 -!You\ can't\ fool\ me= - -#: Sketch.java:1079 -!This\ file\ has\ already\ been\ copied\ to\ the\nlocation\ from\ which\ where\ you're\ trying\ to\ add\ it.\nI\ ain't\ not\ doin\ nuthin'.= - -#: Sketch.java:1093 -#, java-format -!Could\ not\ add\ ''{0}''\ to\ the\ sketch.= - -#: Sketch.java:1393 Sketch.java:1424 -!Build\ folder\ disappeared\ or\ could\ not\ be\ written= - -#: Sketch.java:1408 -!Could\ not\ find\ main\ class= - -#: Sketch.java:1433 -#, java-format -!Uncaught\ exception\ type\:\ {0}= - -#: Sketch.java:1465 -#, java-format -!Problem\ moving\ {0}\ to\ the\ build\ folder= - -#: Sketch.java:1661 -!Uploading...= - -#: Sketch.java:1684 -#, java-format -!Binary\ sketch\ size\:\ {0}\ bytes\ (of\ a\ {1}\ byte\ maximum)= - -#: Sketch.java:1689 -!Couldn't\ determine\ program\ size\:\ {0}= - -#: Sketch.java:1694 -!Sketch\ too\ big;\ see\ http\://www.arduino.cc/en/Guide/Troubleshooting\#size\ for\ tips\ on\ reducing\ it.= - -#: Sketch.java:1754 -!Missing\ the\ */\ from\ the\ end\ of\ a\ /*\ comment\ */= - -#: Sketch.java:1796 -!Sketch\ Disappeared= - -#: Sketch.java:1797 -!The\ sketch\ folder\ has\ disappeared.\n\ Will\ attempt\ to\ re-save\ in\ the\ same\ location,\nbut\ anything\ besides\ the\ code\ will\ be\ lost.= - -#: Sketch.java:1810 -!Could\ not\ re-save\ sketch= - -#: Sketch.java:1811 -!Could\ not\ properly\ re-save\ the\ sketch.\ You\ may\ be\ in\ trouble\ at\ this\ point,\nand\ it\ might\ be\ time\ to\ copy\ and\ paste\ your\ code\ to\ another\ text\ editor.= - -#: Sketch.java:2060 -!The\ sketch\ name\ had\ to\ be\ modified.\ Sketch\ names\ can\ only\ consist\nof\ ASCII\ characters\ and\ numbers\ (but\ cannot\ start\ with\ a\ number).\nThey\ should\ also\ be\ less\ less\ than\ 64\ characters\ long.= - -#: debug/Uploader.java:52 -!https\://developer.berlios.de/bugs/?group_id\=3590= - -#: debug/Uploader.java:54 debug/Compiler.java:43 -#, java-format -!Compiler\ error,\ please\ submit\ this\ code\ to\ {0}= - -#: debug/Uploader.java:199 -#, java-format -!the\ selected\ serial\ port\ {0}\ does\ not\ exist\ or\ your\ board\ is\ not\ connected= - -#: debug/Uploader.java:203 -!Device\ is\ not\ responding,\ check\ the\ right\ serial\ port\ is\ selected\ or\ RESET\ the\ board\ right\ before\ exporting= - -#: debug/Uploader.java:209 -!Problem\ uploading\ to\ board.\ \ See\ http\://www.arduino.cc/en/Guide/Troubleshooting\#upload\ for\ suggestions.= - -#: debug/Uploader.java:213 -!Wrong\ microcontroller\ found.\ \ Did\ you\ select\ the\ right\ board\ from\ the\ Tools\ >\ Board\ menu?= - -#: debug/Compiler.java:41 -!http\://code.google.com/p/arduino/issues/list= - -#: debug/Compiler.java:79 -!No\ board\ selected;\ please\ choose\ a\ board\ from\ the\ Tools\ >\ Board\ menu.= - -#: debug/Compiler.java:422 -#, java-format -!{0}\ returned\ {1}= - -#: debug/Compiler.java:426 -!Error\ compiling.= - -#: debug/Compiler.java:465 -!Please\ import\ the\ SPI\ library\ from\ the\ Sketch\ >\ Import\ Library\ menu.= - -#: debug/Compiler.java:466 -!\nAs\ of\ Arduino\ 0019,\ the\ Ethernet\ library\ depends\ on\ the\ SPI\ library.\nYou\ appear\ to\ be\ using\ it\ or\ another\ library\ that\ depends\ on\ the\ SPI\ library.\n\n= - -#: debug/Compiler.java:471 -!The\ 'BYTE'\ keyword\ is\ no\ longer\ supported.= - -#: debug/Compiler.java:472 -!\nAs\ of\ Arduino\ 1.0,\ the\ 'BYTE'\ keyword\ is\ no\ longer\ supported.\nPlease\ use\ Serial.write()\ instead.\n\n= - -#: debug/Compiler.java:477 -!The\ Server\ class\ has\ been\ renamed\ EthernetServer.= - -#: debug/Compiler.java:478 -!\nAs\ of\ Arduino\ 1.0,\ the\ Server\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetServer.\n\n= - -#: debug/Compiler.java:483 -!The\ Client\ class\ has\ been\ renamed\ EthernetClient.= - -#: debug/Compiler.java:484 -!\nAs\ of\ Arduino\ 1.0,\ the\ Client\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n= - -#: debug/Compiler.java:489 -!The\ Udp\ class\ has\ been\ renamed\ EthernetUdp.= - -#: debug/Compiler.java:490 -!\nAs\ of\ Arduino\ 1.0,\ the\ Udp\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n= - -#: debug/Compiler.java:495 -!Wire.send()\ has\ been\ renamed\ Wire.write().= - -#: debug/Compiler.java:496 -!\nAs\ of\ Arduino\ 1.0,\ the\ Wire.send()\ function\ was\ renamed\ to\ Wire.write()\ for\ consistency\ with\ other\ libraries.\n\n= - -#: debug/Compiler.java:501 -!Wire.receive()\ has\ been\ renamed\ Wire.read().= - -#: debug/Compiler.java:502 -!\nAs\ of\ Arduino\ 1.0,\ the\ Wire.receive()\ function\ was\ renamed\ to\ Wire.read()\ for\ consistency\ with\ other\ libraries.\n\n= - -#: EditorConsole.java:152 -!Console\ Error= - -#: EditorConsole.java:153 -!A\ problem\ occurred\ while\ trying\ to\ open\ the\nfiles\ used\ to\ store\ the\ console\ output.= - -#: Base.java:184 -!Non-fatal\ error\ while\ setting\ the\ Look\ &\ Feel.= - -#: Base.java:185 -!The\ error\ message\ follows,\ however\ Arduino\ should\ run\ fine.= - -#: Base.java:220 -!Problem\ Setting\ the\ Platform= - -#: Base.java:221 -!An\ unknown\ error\ occurred\ while\ trying\ to\ load\nplatform-specific\ code\ for\ your\ machine.= - -#: Base.java:232 -!Please\ install\ JDK\ 1.5\ or\ later= - -#: Base.java:233 -!Arduino\ requires\ a\ full\ JDK\ (not\ just\ a\ JRE)\nto\ run.\ Please\ install\ JDK\ 1.5\ or\ later.\nMore\ information\ can\ be\ found\ in\ the\ reference.= - -#: Base.java:257 -!Sketchbook\ folder\ disappeared= - -#: Base.java:258 -!The\ sketchbook\ folder\ no\ longer\ exists.\nArduino\ will\ switch\ to\ the\ default\ sketchbook\nlocation,\ and\ create\ a\ new\ sketchbook\ folder\ if\nnecessary.\ Arduino\ will\ then\ stop\ talking\ about\nhimself\ in\ the\ third\ person.= - -#: Base.java:532 -!Time\ for\ a\ Break= - -#: Base.java:533 -!You've\ reached\ the\ limit\ for\ auto\ naming\ of\ new\ sketches\nfor\ the\ day.\ How\ about\ going\ for\ a\ walk\ instead?= - -#: Base.java:537 -!Sunshine= - -#: Base.java:538 -!No\ really,\ time\ for\ some\ fresh\ air\ for\ you.= - -#: Base.java:633 -!Open\ an\ Arduino\ sketch...= - -#: Base.java:772 -!\ \ b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }\ Are\ you\ sure\ you\ want\ to\ Quit?

Closing\ the\ last\ open\ sketch\ will\ quit\ Arduino.= - -#: Base.java:970 -!Contributed= - -#: Base.java:1095 -!Sketch\ Does\ Not\ Exist= - -#: Base.java:1096 -!The\ selected\ sketch\ no\ longer\ exists.\nYou\ may\ need\ to\ restart\ Arduino\ to\ update\nthe\ sketchbook\ menu.= - -#: Base.java:1125 -#, java-format -!The\ sketch\ "{0}"\ cannot\ be\ used.\nSketch\ names\ must\ contain\ only\ basic\ letters\ and\ numbers\n(ASCII-only\ with\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number).\nTo\ get\ rid\ of\ this\ message,\ remove\ the\ sketch\ from\n{1}= - -#: Base.java:1132 -!Ignoring\ sketch\ with\ bad\ name= - -#: Base.java:1202 -#, java-format -!The\ library\ "{0}"\ cannot\ be\ used.\nLibrary\ names\ must\ contain\ only\ basic\ letters\ and\ numbers.\n(ASCII\ only\ and\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number)= - -#: Base.java:1207 -!Ignoring\ bad\ library\ name= - -#: Base.java:1432 -!Problem\ getting\ data\ folder= - -#: Base.java:1433 -!Error\ getting\ the\ Arduino\ data\ folder.= - -#: Base.java:1440 -!Settings\ issues= - -#: Base.java:1441 -!Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ settings.= - -#: Base.java:1602 -!You\ forgot\ your\ sketchbook= - -#: Base.java:1603 -!Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ sketchbook.= - -#: Base.java:1623 -!Select\ (or\ create\ new)\ folder\ for\ sketches...= - -#: Base.java:1647 -!Problem\ Opening\ URL= - -#: Base.java:1648 -#, java-format -!Could\ not\ open\ the\ URL\n{0}= - -#: Base.java:1671 -!Problem\ Opening\ Folder= - -#: Base.java:1672 -#, java-format -!Could\ not\ open\ the\ folder\n{0}= - -#: Base.java:1785 -!Guide_MacOSX.html= - -#: Base.java:1787 -!Guide_Windows.html= - -#: Base.java:1789 -!http\://www.arduino.cc/playground/Learning/Linux= - -#: Base.java:1794 -!index.html= - -#: Base.java:1799 -!Guide_Environment.html= - -#: Base.java:1804 -!environment= - -#: Base.java:1804 -!platforms.html= - -#: Base.java:1809 -!Guide_Troubleshooting.html= - -#: Base.java:1814 -!FAQ.html= - -#: Base.java:1826 -!Message= - -#: Base.java:1842 -!Warning= - -#: Base.java:2196 -#, java-format -!Could\ not\ remove\ old\ version\ of\ {0}= - -#: Base.java:2206 -#, java-format -!Could\ not\ replace\ {0}= - -#: Base.java:2247 Base.java:2270 -#, java-format -!Could\ not\ delete\ {0}= - -#: EditorHeader.java:292 -!New\ Tab= - -#: EditorHeader.java:300 -!Rename= - -#: EditorHeader.java:326 -!Previous\ Tab= - -#: EditorHeader.java:340 -!Next\ Tab= +#: FindReplace.java:124 FindReplace.java:127 +Find=Find #: EditorToolbar.java:41 EditorToolbar.java:46 -!Verify= +Verify=Verify + +#: EditorToolbar.java:41 Editor.java:545 +Upload=Upload + +#: EditorToolbar.java:41 Editor.java:493 +New=New #: EditorToolbar.java:41 -!Open= +Open=Open + +#: EditorToolbar.java:41 EditorToolbar.java:46 Editor.java:529 +#: Editor.java:2064 Editor.java:2468 +Save=Save + +#: EditorToolbar.java:41 EditorToolbar.java:46 Editor.java:669 +Serial\ Monitor=Serial Monitor + +#: EditorToolbar.java:46 Editor.java:553 +Upload\ Using\ Programmer=Upload Using Programmer #: EditorToolbar.java:46 -!New\ Editor\ Window= +New\ Editor\ Window=New Editor Window #: EditorToolbar.java:46 -!Open\ in\ Another\ Window= +Open\ in\ Another\ Window=Open in Another Window -#: Platform.java:167 -!No\ launcher\ available= +#: Preferences.java:77 UpdateCheck.java:108 +Yes=Yes -#: Platform.java:168 -!Unspecified\ platform,\ no\ launcher\ available.\nTo\ enable\ opening\ URLs\ or\ folders,\ add\ a\ \n"launcher\=/path/to/app"\ line\ to\ preferences.txt= +#: Preferences.java:78 UpdateCheck.java:108 +No=No -#: Theme.java:52 -!Could\ not\ read\ color\ theme\ settings.\nYou'll\ need\ to\ reinstall\ Processing.= +#: Preferences.java:79 Sketch.java:585 Sketch.java:737 Sketch.java:1042 +#: Editor.java:2064 Editor.java:2145 Editor.java:2465 +Cancel=Cancel -#: Preferences.java:80 -!Browse= +#: Preferences.java:80 Sketch.java:585 Sketch.java:737 Sketch.java:1042 +#: Editor.java:2145 Editor.java:2465 +OK=OK -#: Preferences.java:83 -!System\ Default= +#: Preferences.java:81 +Browse=Browse #: Preferences.java:84 -!Arabic= +System\ Default=System Default #: Preferences.java:85 -!Aragonese= +Arabic=Arabic #: Preferences.java:86 -!Catalan= +Aragonese=Aragonese #: Preferences.java:87 -!Chinese\ Simplified= +Catalan=Catalan #: Preferences.java:88 -!Chinese\ Traditional= +Chinese\ Simplified=Chinese Simplified #: Preferences.java:89 -!Danish= +Chinese\ Traditional=Chinese Traditional #: Preferences.java:90 -!Dutch= +Danish=Danish #: Preferences.java:91 -!English= +Dutch=Dutch #: Preferences.java:92 -!Estonian= +English=English #: Preferences.java:93 -!French= +Estonian=Estonian #: Preferences.java:94 -!Filipino= +Filipino=Filipino #: Preferences.java:95 -!Galician= +French=French #: Preferences.java:96 -!German= +Galician=Galician #: Preferences.java:97 -!Greek= +German=German #: Preferences.java:98 -!Hungarian= +Greek=Greek #: Preferences.java:99 -!Indonesian= +Hindi=Hindi #: Preferences.java:100 -!Italian= +Hungarian=Hungarian #: Preferences.java:101 -!Japanese= +Indonesian=Indonesian #: Preferences.java:102 -!Korean= +Italian=Italian #: Preferences.java:103 -!Latvian= +Japanese=Japanese #: Preferences.java:104 -!Lithuaninan= +Korean=Korean #: Preferences.java:105 -!Persian= +Latvian=Latvian #: Preferences.java:106 -!Polish= +Lithuaninan=Lithuaninan -#: Preferences.java:107 Preferences.java:108 -!Portuguese= +#: Preferences.java:107 +Marathi=Marathi + +#: Preferences.java:108 +Norwegian=Norwegian #: Preferences.java:109 -!Romanian= +Persian=Persian #: Preferences.java:110 -!Russian= +Polish=Polish -#: Preferences.java:111 -!Spanish= +#: Preferences.java:111 Preferences.java:112 +Portuguese=Portuguese -#: Preferences.java:210 -!Could\ not\ read\ default\ settings.\nYou'll\ need\ to\ reinstall\ Arduino.= +#: Preferences.java:113 +Romanian=Romanian -#: Preferences.java:242 +#: Preferences.java:114 +Russian=Russian + +#: Preferences.java:115 +Spanish=Spanish + +#: Preferences.java:116 +Tamil=Tamil + +#: Preferences.java:219 +Could\ not\ read\ default\ settings.\nYou'll\ need\ to\ reinstall\ Arduino.=Could not read default settings.\nYou'll need to reinstall Arduino. + +#: Preferences.java:258 #, java-format -!Could\ not\ read\ preferences\ from\ {0}= +Could\ not\ read\ preferences\ from\ {0}=Could not read preferences from {0} -#: Preferences.java:261 -!Error\ reading\ preferences= +#: Preferences.java:277 +Error\ reading\ preferences=Error reading preferences -#: Preferences.java:263 +#: Preferences.java:279 #, java-format -!Error\ reading\ the\ preferences\ file.\ Please\ delete\ (or\ move)\n{0}\ and\ restart\ Arduino.= +Error\ reading\ the\ preferences\ file.\ Please\ delete\ (or\ move)\n{0}\ and\ restart\ Arduino.=Error reading the preferences file. Please delete (or move)\n{0} and restart Arduino. -#: Preferences.java:299 -!Sketchbook\ location\:= +#: Preferences.java:295 Editor.java:583 +Preferences=Preferences -#: Preferences.java:314 -!Select\ new\ sketchbook\ location= +#: Preferences.java:315 +Sketchbook\ location\:=Sketchbook location\: -#: Preferences.java:337 -!Editor\ language\:\ = +#: Preferences.java:330 +Select\ new\ sketchbook\ location=Select new sketchbook location -#: Preferences.java:342 Preferences.java:358 -!\ \ (requires\ restart\ of\ Arduino)= +#: Preferences.java:353 +Editor\ language\:\ =Editor language\: -#: Preferences.java:354 -!Editor\ font\ size\:\ = +#: Preferences.java:358 Preferences.java:374 +\ \ (requires\ restart\ of\ Arduino)=\ (requires restart of Arduino) -#: Preferences.java:371 -!Show\ verbose\ output\ during\:\ = +#: Preferences.java:370 +Editor\ font\ size\:\ =Editor font size\: -#: Preferences.java:373 -!compilation\ = +#: Preferences.java:387 +Show\ verbose\ output\ during\:\ =Show verbose output during\: -#: Preferences.java:375 -!upload= +#: Preferences.java:389 +compilation\ =compilation -#: Preferences.java:384 -!Verify\ code\ after\ upload= +#: Preferences.java:391 +upload=upload -#: Preferences.java:393 -!Use\ external\ editor= +#: Preferences.java:400 +Verify\ code\ after\ upload=Verify code after upload -#: Preferences.java:403 -!Check\ for\ updates\ on\ startup= +#: Preferences.java:409 +Use\ external\ editor=Use external editor -#: Preferences.java:412 -!Update\ sketch\ files\ to\ new\ extension\ on\ save\ (.pde\ ->\ .ino)= +#: Preferences.java:419 +Check\ for\ updates\ on\ startup=Check for updates on startup -#: Preferences.java:423 -!Automatically\ associate\ .ino\ files\ with\ Arduino= +#: Preferences.java:428 +Update\ sketch\ files\ to\ new\ extension\ on\ save\ (.pde\ ->\ .ino)=Update sketch files to new extension on save (.pde -> .ino) -#: Preferences.java:433 -!More\ preferences\ can\ be\ edited\ directly\ in\ the\ file= +#: Preferences.java:439 +Automatically\ associate\ .ino\ files\ with\ Arduino=Automatically associate .ino files with Arduino -#: Preferences.java:462 -!(edit\ only\ when\ Arduino\ is\ not\ running)= +#: Preferences.java:449 +More\ preferences\ can\ be\ edited\ directly\ in\ the\ file=More preferences can be edited directly in the file -#: Preferences.java:609 +#: Preferences.java:478 +(edit\ only\ when\ Arduino\ is\ not\ running)=(edit only when Arduino is not running) + +#: Preferences.java:625 #, java-format -!ignoring\ invalid\ font\ size\ {0}= +ignoring\ invalid\ font\ size\ {0}=ignoring invalid font size {0} + +#: EditorHeader.java:292 +New\ Tab=New Tab + +#: EditorHeader.java:300 +Rename=Rename + +#: EditorHeader.java:314 Sketch.java:591 +Delete=Delete + +#: EditorHeader.java:326 +Previous\ Tab=Previous Tab + +#: EditorHeader.java:340 +Next\ Tab=Next Tab + +#: Sketch.java:274 Sketch.java:303 Sketch.java:577 Sketch.java:966 +Sketch\ is\ Read-Only=Sketch is Read-Only + +#: Sketch.java:275 Sketch.java:304 Sketch.java:578 Sketch.java:967 +Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ the\ sketch\ in\ another\ location,\nand\ try\ again.=Some files are marked "read-only", so you'll\nneed to re-save the sketch in another location,\nand try again. + +#: Sketch.java:282 +Name\ for\ new\ file\:=Name for new file\: + +#: Sketch.java:294 +Sketch\ is\ Untitled=Sketch is Untitled + +#: Sketch.java:295 +How\ about\ saving\ the\ sketch\ first\ \nbefore\ trying\ to\ rename\ it?=How about saving the sketch first \nbefore trying to rename it? + +#: Sketch.java:355 Sketch.java:362 Sketch.java:373 +Problem\ with\ rename=Problem with rename + +#: Sketch.java:356 +The\ name\ cannot\ start\ with\ a\ period.=The name cannot start with a period. + +#: Sketch.java:364 +#, java-format +".{0}"\ is\ not\ a\ valid\ extension.=".{0}" is not a valid extension. + +#: Sketch.java:374 +The\ main\ file\ can't\ use\ an\ extension.\n(It\ may\ be\ time\ for\ your\ to\ graduate\ to\ a\n"real"\ programming\ environment)=The main file can't use an extension.\n(It may be time for your to graduate to a\n"real" programming environment) + +#: Sketch.java:396 Sketch.java:410 Sketch.java:419 Sketch.java:859 +Nope=Nope + +#: Sketch.java:398 +#, java-format +A\ file\ named\ "{0}"\ already\ exists\ in\ "{1}"=A file named "{0}" already exists in "{1}" + +#: Sketch.java:411 +You\ can't\ have\ a\ .cpp\ file\ with\ the\ same\ name\ as\ the\ sketch.=You can't have a .cpp file with the same name as the sketch. + +#: Sketch.java:421 +You\ can't\ rename\ the\ sketch\ to\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.=You can't rename the sketch to "{0}"\nbecause the sketch already has a .cpp file with that name. + +#: Sketch.java:455 +Cannot\ Rename=Cannot Rename + +#: Sketch.java:457 +#, java-format +Sorry,\ a\ sketch\ (or\ folder)\ named\ "{0}"\ already\ exists.=Sorry, a sketch (or folder) named "{0}" already exists. + +#: Sketch.java:475 +Could\ not\ rename\ the\ sketch.\ (0)=Could not rename the sketch. (0) + +#: Sketch.java:483 Sketch.java:528 +#, java-format +Could\ not\ rename\ "{0}"\ to\ "{1}"=Could not rename "{0}" to "{1}" + +#: Sketch.java:496 +Could\ not\ rename\ the\ sketch.\ (1)=Could not rename the sketch. (1) + +#: Sketch.java:503 +Could\ not\ rename\ the\ sketch.\ (2)=Could not rename the sketch. (2) + +#: Sketch.java:540 +createNewFile()\ returned\ false=createNewFile() returned false + +#: Sketch.java:587 +Are\ you\ sure\ you\ want\ to\ delete\ this\ sketch?=Are you sure you want to delete this sketch? + +#: Sketch.java:588 +#, java-format +Are\ you\ sure\ you\ want\ to\ delete\ "{0}"?=Are you sure you want to delete "{0}"? + +#: Sketch.java:616 +Couldn't\ do\ it=Couldn't do it + +#: Sketch.java:617 +#, java-format +Could\ not\ delete\ "{0}".=Could not delete "{0}". + +#: Sketch.java:647 +removeCode\:\ internal\ error..\ could\ not\ find\ code=removeCode\: internal error.. could not find code + +#: Sketch.java:720 +Sketch\ is\ read-only=Sketch is read-only + +#: Sketch.java:721 +Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ this\ sketch\ to\ another\ location.=Some files are marked "read-only", so you'll\nneed to re-save this sketch to another location. + +#: Sketch.java:739 +In\ Arduino\ 1.0,\ the\ default\ file\ extension\ has\ changed\nfrom\ .pde\ to\ .ino.\ \ New\ sketches\ (including\ those\ created\nby\ "Save-As"\ will\ use\ the\ new\ extension.\ \ The\ extension\nof\ existing\ sketches\ will\ be\ updated\ on\ save,\ but\ you\ can\ndisable\ this\ in\ the\ Preferences\ dialog.\n\nSave\ sketch\ and\ update\ its\ extension?=In Arduino 1.0, the default file extension has changed\nfrom .pde to .ino. New sketches (including those created\nby "Save-As" will use the new extension. The extension\nof existing sketches will be updated on save, but you can\ndisable this in the Preferences dialog.\n\nSave sketch and update its extension? + +#: Sketch.java:746 +.pde\ ->\ .ino=.pde -> .ino + +#: Sketch.java:825 +Save\ sketch\ folder\ as...=Save sketch folder as... + +#: Sketch.java:861 +You\ can't\ save\ the\ sketch\ as\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.=You can't save the sketch as "{0}"\nbecause the sketch already has a .cpp file with that name. + +#: Sketch.java:882 +How\ very\ Borges\ of\ you=How very Borges of you + +#: Sketch.java:883 +You\ cannot\ save\ the\ sketch\ into\ a\ folder\ninside\ itself.\ This\ would\ go\ on\ forever.=You cannot save the sketch into a folder\ninside itself. This would go on forever. + +#: Sketch.java:975 +Select\ an\ image\ or\ other\ data\ file\ to\ copy\ to\ your\ sketch=Select an image or other data file to copy to your sketch + +#: Sketch.java:992 Editor.java:376 +One\ file\ added\ to\ the\ sketch.=One file added to the sketch. + +#: Sketch.java:1043 +#, java-format +Replace\ the\ existing\ version\ of\ {0}?=Replace the existing version of {0}? + +#: Sketch.java:1065 Sketch.java:1088 +Error\ adding\ file=Error adding file + +#: Sketch.java:1066 +#, java-format +Could\ not\ delete\ the\ existing\ ''{0}''\ file.=Could not delete the existing ''{0}'' file. + +#: Sketch.java:1074 +You\ can't\ fool\ me=You can't fool me + +#: Sketch.java:1075 +This\ file\ has\ already\ been\ copied\ to\ the\nlocation\ from\ which\ where\ you're\ trying\ to\ add\ it.\nI\ ain't\ not\ doin\ nuthin'.=This file has already been copied to the\nlocation from which where you're trying to add it.\nI ain't not doin nuthin'. + +#: Sketch.java:1089 +#, java-format +Could\ not\ add\ ''{0}''\ to\ the\ sketch.=Could not add ''{0}'' to the sketch. + +#: Sketch.java:1392 Sketch.java:1423 +Build\ folder\ disappeared\ or\ could\ not\ be\ written=Build folder disappeared or could not be written + +#: Sketch.java:1407 +Could\ not\ find\ main\ class=Could not find main class + +#: Sketch.java:1432 +#, java-format +Uncaught\ exception\ type\:\ {0}=Uncaught exception type\: {0} + +#: Sketch.java:1467 +#, java-format +Problem\ moving\ {0}\ to\ the\ build\ folder=Problem moving {0} to the build folder + +#: Sketch.java:1608 Editor.java:1890 +Compiling\ sketch...=Compiling sketch... + +#: Sketch.java:1622 +Uploading...=Uploading... + +#: Sketch.java:1644 +#, java-format +Binary\ sketch\ size\:\ {0}\ bytes\ (of\ a\ {1}\ byte\ maximum)=Binary sketch size\: {0} bytes (of a {1} byte maximum) + +#: Sketch.java:1647 +Couldn't\ determine\ program\ size\:\ {0}=Couldn't determine program size\: {0} + +#: Sketch.java:1653 +Sketch\ too\ big;\ see\ http\://www.arduino.cc/en/Guide/Troubleshooting\#size\ for\ tips\ on\ reducing\ it.=Sketch too big; see http\://www.arduino.cc/en/Guide/Troubleshooting\#size for tips on reducing it. + +#: Sketch.java:1712 +Missing\ the\ */\ from\ the\ end\ of\ a\ /*\ comment\ */=Missing the */ from the end of a /* comment */ + +#: Sketch.java:1754 +Sketch\ Disappeared=Sketch Disappeared + +#: Sketch.java:1755 +The\ sketch\ folder\ has\ disappeared.\n\ Will\ attempt\ to\ re-save\ in\ the\ same\ location,\nbut\ anything\ besides\ the\ code\ will\ be\ lost.=The sketch folder has disappeared.\n Will attempt to re-save in the same location,\nbut anything besides the code will be lost. + +#: Sketch.java:1768 +Could\ not\ re-save\ sketch=Could not re-save sketch + +#: Sketch.java:1769 +Could\ not\ properly\ re-save\ the\ sketch.\ You\ may\ be\ in\ trouble\ at\ this\ point,\nand\ it\ might\ be\ time\ to\ copy\ and\ paste\ your\ code\ to\ another\ text\ editor.=Could not properly re-save the sketch. You may be in trouble at this point,\nand it might be time to copy and paste your code to another text editor. + +#: Sketch.java:2018 +The\ sketch\ name\ had\ to\ be\ modified.\ Sketch\ names\ can\ only\ consist\nof\ ASCII\ characters\ and\ numbers\ (but\ cannot\ start\ with\ a\ number).\nThey\ should\ also\ be\ less\ less\ than\ 64\ characters\ long.=The sketch name had to be modified. Sketch names can only consist\nof ASCII characters and numbers (but cannot start with a number).\nThey should also be less less than 64 characters long. + +#: SerialMonitor.java:93 +Send=Send + +#: SerialMonitor.java:110 +Autoscroll=Autoscroll + +#: SerialMonitor.java:112 +No\ line\ ending=No line ending + +#: SerialMonitor.java:112 +Newline=Newline + +#: SerialMonitor.java:112 +Carriage\ return=Carriage return + +#: SerialMonitor.java:112 +Both\ NL\ &\ CR=Both NL & CR + +#: SerialMonitor.java:130 SerialMonitor.java:133 +baud=baud + +#: debug/Compiler.java:47 +http\://code.google.com/p/arduino/issues/list=http\://code.google.com/p/arduino/issues/list + +#: debug/Compiler.java:49 debug/Uploader.java:45 +#, java-format +Compiler\ error,\ please\ submit\ this\ code\ to\ {0}=Compiler error, please submit this code to {0} + +#: debug/Compiler.java:126 +No\ board\ selected;\ please\ choose\ a\ board\ from\ the\ Tools\ >\ Board\ menu.=No board selected; please choose a board from the Tools > Board menu. + +#: debug/Compiler.java:365 +#, java-format +{0}\ returned\ {1}={0} returned {1} + +#: debug/Compiler.java:369 +Error\ compiling.=Error compiling. + +#: debug/Compiler.java:408 +Please\ import\ the\ SPI\ library\ from\ the\ Sketch\ >\ Import\ Library\ menu.=Please import the SPI library from the Sketch > Import Library menu. + +#: debug/Compiler.java:409 +\nAs\ of\ Arduino\ 0019,\ the\ Ethernet\ library\ depends\ on\ the\ SPI\ library.\nYou\ appear\ to\ be\ using\ it\ or\ another\ library\ that\ depends\ on\ the\ SPI\ library.\n\n=\nAs of Arduino 0019, the Ethernet library depends on the SPI library.\nYou appear to be using it or another library that depends on the SPI library.\n\n + +#: debug/Compiler.java:414 +The\ 'BYTE'\ keyword\ is\ no\ longer\ supported.=The 'BYTE' keyword is no longer supported. + +#: debug/Compiler.java:415 +\nAs\ of\ Arduino\ 1.0,\ the\ 'BYTE'\ keyword\ is\ no\ longer\ supported.\nPlease\ use\ Serial.write()\ instead.\n\n=\nAs of Arduino 1.0, the 'BYTE' keyword is no longer supported.\nPlease use Serial.write() instead.\n\n + +#: debug/Compiler.java:420 +The\ Server\ class\ has\ been\ renamed\ EthernetServer.=The Server class has been renamed EthernetServer. + +#: debug/Compiler.java:421 +\nAs\ of\ Arduino\ 1.0,\ the\ Server\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetServer.\n\n=\nAs of Arduino 1.0, the Server class in the Ethernet library has been renamed to EthernetServer.\n\n + +#: debug/Compiler.java:426 +The\ Client\ class\ has\ been\ renamed\ EthernetClient.=The Client class has been renamed EthernetClient. + +#: debug/Compiler.java:427 +\nAs\ of\ Arduino\ 1.0,\ the\ Client\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n=\nAs of Arduino 1.0, the Client class in the Ethernet library has been renamed to EthernetClient.\n\n + +#: debug/Compiler.java:432 +The\ Udp\ class\ has\ been\ renamed\ EthernetUdp.=The Udp class has been renamed EthernetUdp. + +#: debug/Compiler.java:433 +\nAs\ of\ Arduino\ 1.0,\ the\ Udp\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetUdp.\n\n=\nAs of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.\n\n + +#: debug/Compiler.java:438 +Wire.send()\ has\ been\ renamed\ Wire.write().=Wire.send() has been renamed Wire.write(). + +#: debug/Compiler.java:439 +\nAs\ of\ Arduino\ 1.0,\ the\ Wire.send()\ function\ was\ renamed\ to\ Wire.write()\ for\ consistency\ with\ other\ libraries.\n\n=\nAs of Arduino 1.0, the Wire.send() function was renamed to Wire.write() for consistency with other libraries.\n\n + +#: debug/Compiler.java:444 +Wire.receive()\ has\ been\ renamed\ Wire.read().=Wire.receive() has been renamed Wire.read(). + +#: debug/Compiler.java:445 +\nAs\ of\ Arduino\ 1.0,\ the\ Wire.receive()\ function\ was\ renamed\ to\ Wire.read()\ for\ consistency\ with\ other\ libraries.\n\n=\nAs of Arduino 1.0, the Wire.receive() function was renamed to Wire.read() for consistency with other libraries.\n\n + +#: debug/Compiler.java:450 +'Mouse'\ only\ supported\ on\ the\ Arduino\ Leonardo='Mouse' only supported on the Arduino Leonardo + +#: debug/Compiler.java:455 +'Keyboard'\ only\ supported\ on\ the\ Arduino\ Leonardo='Keyboard' only supported on the Arduino Leonardo + +#: debug/Uploader.java:43 +https\://developer.berlios.de/bugs/?group_id\=3590=https\://developer.berlios.de/bugs/?group_id\=3590 + +#: debug/Uploader.java:195 +#, java-format +the\ selected\ serial\ port\ {0}\ does\ not\ exist\ or\ your\ board\ is\ not\ connected=the selected serial port {0} does not exist or your board is not connected + +#: debug/Uploader.java:199 +Device\ is\ not\ responding,\ check\ the\ right\ serial\ port\ is\ selected\ or\ RESET\ the\ board\ right\ before\ exporting=Device is not responding, check the right serial port is selected or RESET the board right before exporting + +#: debug/Uploader.java:209 +Problem\ uploading\ to\ board.\ \ See\ http\://www.arduino.cc/en/Guide/Troubleshooting\#upload\ for\ suggestions.=Problem uploading to board. See http\://www.arduino.cc/en/Guide/Troubleshooting\#upload for suggestions. + +#: debug/Uploader.java:213 +Wrong\ microcontroller\ found.\ \ Did\ you\ select\ the\ right\ board\ from\ the\ Tools\ >\ Board\ menu?=Wrong microcontroller found. Did you select the right board from the Tools > Board menu? + +#: debug/BasicUploader.java:80 +Forcing\ reset\ using\ 1200bps\ open/close\ on\ port\ =Forcing reset using 1200bps open/close on port + +#: debug/BasicUploader.java:209 +Couldn't\ find\ a\ Board\ on\ the\ selected\ port.\ Check\ that\ you\ have\ the\ correct\ port\ selected.\ \ If\ it\ is\ correct,\ try\ pressing\ the\ board's\ reset\ button\ after\ initiating\ the\ upload.=Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload. + +#: Serial.java:121 +#, java-format +Serial\ port\ ''{0}''\ already\ in\ use.\ Try\ quitting\ any\ programs\ that\ may\ be\ using\ it.=Serial port ''{0}'' already in use. Try quitting any programs that may be using it. + +#: Serial.java:125 +#, java-format +Error\ touching\ serial\ port\ ''{0}''.=Error touching serial port ''{0}''. + +#: Serial.java:174 +#, java-format +Serial\ port\ ''{0}''\ already\ in\ use.\ Try\ quiting\ any\ programs\ that\ may\ be\ using\ it.=Serial port ''{0}'' already in use. Try quiting any programs that may be using it. + +#: Serial.java:181 +#, java-format +Error\ opening\ serial\ port\ ''{0}''.=Error opening serial port ''{0}''. + +#: Serial.java:194 +#, java-format +Serial\ port\ ''{0}''\ not\ found.\ Did\ you\ select\ the\ right\ one\ from\ the\ Tools\ >\ Serial\ Port\ menu?=Serial port ''{0}'' not found. Did you select the right one from the Tools > Serial Port menu? + +#: Serial.java:451 +#, java-format +readBytesUntil()\ byte\ buffer\ is\ too\ small\ for\ the\ {0}\ bytes\ up\ to\ and\ including\ char\ {1}=readBytesUntil() byte buffer is too small for the {0} bytes up to and including char {1} + +#: Serial.java:593 +#, java-format +Error\ inside\ Serial.{0}()=Error inside Serial.{0}() + +#: UpdateCheck.java:53 +http\://www.arduino.cc/latest.txt=http\://www.arduino.cc/latest.txt + +#: UpdateCheck.java:103 +A\ new\ version\ of\ Arduino\ is\ available,\nwould\ you\ like\ to\ visit\ the\ Arduino\ download\ page?=A new version of Arduino is available,\nwould you like to visit the Arduino download page? + +#: UpdateCheck.java:111 +Update=Update + +#: UpdateCheck.java:118 +http\://www.arduino.cc/en/Main/Software=http\://www.arduino.cc/en/Main/Software + +#: Editor.java:373 +No\ files\ were\ added\ to\ the\ sketch.=No files were added to the sketch. + +#: Editor.java:380 +#, java-format +{0}\ files\ added\ to\ the\ sketch.={0} files added to the sketch. + +#: Editor.java:491 +File=File + +#: Editor.java:510 +Sketchbook=Sketchbook + +#: Editor.java:516 +Examples=Examples + +#: Editor.java:521 Editor.java:2024 +Close=Close + +#: Editor.java:537 +Save\ As...=Save As... + +#: Editor.java:563 +Page\ Setup=Page Setup + +#: Editor.java:571 +Print=Print + +#: Editor.java:607 +Sketch=Sketch + +#: Editor.java:609 +Verify\ /\ Compile=Verify / Compile + +#: Editor.java:636 +Import\ Library...=Import Library... + +#: Editor.java:641 +Show\ Sketch\ Folder=Show Sketch Folder + +#: Editor.java:650 +Add\ File...=Add File... + +#: Editor.java:663 +Tools=Tools + +#: Editor.java:699 +Serial\ Port=Serial Port + +#: Editor.java:704 +Programmer=Programmer + +#: Editor.java:708 +Burn\ Bootloader=Burn Bootloader + +#: Editor.java:932 +serialMenu\ is\ null=serialMenu is null + +#: Editor.java:936 Editor.java:943 +name\ is\ null=name is null + +#: Editor.java:999 +error\ retrieving\ port\ list=error retrieving port list + +#: Editor.java:1015 +Help=Help + +#: Editor.java:1054 +Getting\ Started=Getting Started + +#: Editor.java:1062 +Environment=Environment + +#: Editor.java:1070 +Troubleshooting=Troubleshooting + +#: Editor.java:1078 +Reference=Reference + +#: Editor.java:1086 Editor.java:2775 +Find\ in\ Reference=Find in Reference + +#: Editor.java:1097 +Frequently\ Asked\ Questions=Frequently Asked Questions + +#: Editor.java:1105 +Visit\ Arduino.cc=Visit Arduino.cc + +#: Editor.java:1108 +http\://arduino.cc/=http\://arduino.cc/ + +#: Editor.java:1116 +About\ Arduino=About Arduino + +#: Editor.java:1130 +Edit=Edit + +#: Editor.java:1133 Editor.java:1355 +Undo=Undo + +#: Editor.java:1138 Editor.java:1140 Editor.java:1390 +Redo=Redo + +#: Editor.java:1149 Editor.java:2699 +Cut=Cut + +#: Editor.java:1157 Editor.java:2707 +Copy=Copy + +#: Editor.java:1165 Editor.java:2715 +Copy\ for\ Forum=Copy for Forum + +#: Editor.java:1177 Editor.java:2723 +Copy\ as\ HTML=Copy as HTML + +#: Editor.java:1189 Editor.java:2731 +Paste=Paste + +#: Editor.java:1198 Editor.java:2739 +Select\ All=Select All + +#: Editor.java:1208 Editor.java:2749 +Comment/Uncomment=Comment/Uncomment + +#: Editor.java:1216 Editor.java:2757 +Increase\ Indent=Increase Indent + +#: Editor.java:1224 Editor.java:2765 +Decrease\ Indent=Decrease Indent + +#: Editor.java:1234 +Find...=Find... + +#: Editor.java:1249 +Find\ Next=Find Next + +#: Editor.java:1259 +Find\ Previous=Find Previous + +#: Editor.java:1269 +Use\ Selection\ For\ Find=Use Selection For Find + +#: Editor.java:1872 +#, java-format +No\ reference\ available\ for\ "{0}"=No reference available for "{0}" + +#: Editor.java:1874 +#, java-format +{0}.html={0}.html + +#: Editor.java:1911 Editor.java:1928 +Done\ compiling.=Done compiling. + +#: Editor.java:2020 +#, java-format +Save\ changes\ to\ "{0}"?\ \ =Save changes to "{0}"? + +#: Editor.java:2053 +\ \ b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }\ Do\ you\ want\ to\ save\ changes\ to\ this\ sketch
\ before\ closing?

If\ you\ don't\ save,\ your\ changes\ will\ be\ lost.= Do you want to save changes to this sketch
before closing?

If you don't save, your changes will be lost. + +#: Editor.java:2064 +Don't\ Save=Don't Save + +#: Editor.java:2136 +Bad\ file\ selected=Bad file selected + +#: Editor.java:2137 +Processing\ can\ only\ open\ its\ own\ sketches\nand\ other\ files\ ending\ in\ .ino\ or\ .pde=Processing can only open its own sketches\nand other files ending in .ino or .pde + +#: Editor.java:2147 +#, java-format +The\ file\ "{0}"\ needs\ to\ be\ inside\na\ sketch\ folder\ named\ "{1}".\nCreate\ this\ folder,\ move\ the\ file,\ and\ continue?=The file "{0}" needs to be inside\na sketch folder named "{1}".\nCreate this folder, move the file, and continue? + +#: Editor.java:2156 +Moving=Moving + +#: Editor.java:2169 +#, java-format +A\ folder\ named\ "{0}"\ already\ exists.\ Can't\ open\ sketch.=A folder named "{0}" already exists. Can't open sketch. + +#: Editor.java:2179 +Could\ not\ create\ the\ sketch\ folder.=Could not create the sketch folder. + +#: Editor.java:2188 +Could\ not\ copy\ to\ a\ proper\ location.=Could not copy to a proper location. + +#: Editor.java:2206 +Could\ not\ create\ the\ sketch.=Could not create the sketch. + +#: Editor.java:2213 +#, java-format +{0}\ |\ Arduino\ {1}={0} | Arduino {1} + +#: Editor.java:2270 Editor.java:2308 +Saving...=Saving... + +#: Editor.java:2275 Editor.java:2311 +Done\ Saving.=Done Saving. + +#: Editor.java:2317 +Save\ Canceled.=Save Canceled. + +#: Editor.java:2343 +#, java-format +Serial\ port\ {0}\ not\ found.\nRetry\ the\ upload\ with\ another\ serial\ port?=Serial port {0} not found.\nRetry the upload with another serial port? + +#: Editor.java:2378 +Uploading\ to\ I/O\ Board...=Uploading to I/O Board... + +#: Editor.java:2395 Editor.java:2431 +Done\ uploading.=Done uploading. + +#: Editor.java:2403 Editor.java:2439 +Upload\ canceled.=Upload canceled. + +#: Editor.java:2467 +Save\ changes\ before\ export?=Save changes before export? + +#: Editor.java:2482 +Export\ canceled,\ changes\ must\ first\ be\ saved.=Export canceled, changes must first be saved. + +#: Editor.java:2504 +Burning\ bootloader\ to\ I/O\ Board\ (this\ may\ take\ a\ minute)...=Burning bootloader to I/O Board (this may take a minute)... + +#: Editor.java:2510 +Done\ burning\ bootloader.=Done burning bootloader. + +#: Editor.java:2512 Editor.java:2516 Editor.java:2520 +Error\ while\ burning\ bootloader.=Error while burning bootloader. + +#: Editor.java:2547 +Printing...=Printing... + +#: Editor.java:2564 +Done\ printing.=Done printing. + +#: Editor.java:2567 +Error\ while\ printing.=Error while printing. + +#: Editor.java:2571 +Printing\ canceled.=Printing canceled. + +#: Editor.java:2619 +#, java-format +Bad\ error\ line\:\ {0}=Bad error line\: {0} + +#: Editor.java:2688 +Open\ URL=Open URL + +#: EditorConsole.java:152 +Console\ Error=Console Error + +#: EditorConsole.java:153 +A\ problem\ occurred\ while\ trying\ to\ open\ the\nfiles\ used\ to\ store\ the\ console\ output.=A problem occurred while trying to open the\nfiles used to store the console output. + +#: Theme.java:52 +Could\ not\ read\ color\ theme\ settings.\nYou'll\ need\ to\ reinstall\ Processing.=Could not read color theme settings.\nYou'll need to reinstall Processing. + +#: Platform.java:167 +No\ launcher\ available=No launcher available + +#: Platform.java:168 +Unspecified\ platform,\ no\ launcher\ available.\nTo\ enable\ opening\ URLs\ or\ folders,\ add\ a\ \n"launcher\=/path/to/app"\ line\ to\ preferences.txt=Unspecified platform, no launcher available.\nTo enable opening URLs or folders, add a \n"launcher\=/path/to/app" line to preferences.txt + +#: tools/format/src/AutoFormat.java:54 tools/AutoFormat.java:916 +No\ changes\ necessary\ for\ Auto\ Format.=No changes necessary for Auto Format. + +#: tools/AutoFormat.java:91 +Auto\ Format=Auto Format + +#: tools/AutoFormat.java:922 +Auto\ Format\ Canceled\:\ Too\ many\ right\ parentheses.=Auto Format Canceled\: Too many right parentheses. + +#: tools/AutoFormat.java:925 +Auto\ Format\ Canceled\:\ Too\ many\ left\ parentheses.=Auto Format Canceled\: Too many left parentheses. + +#: tools/AutoFormat.java:931 +Auto\ Format\ Canceled\:\ Too\ many\ right\ curly\ braces.=Auto Format Canceled\: Too many right curly braces. + +#: tools/AutoFormat.java:934 +Auto\ Format\ Canceled\:\ Too\ many\ left\ curly\ braces.=Auto Format Canceled\: Too many left curly braces. + +#: tools/AutoFormat.java:944 +Auto\ Format\ finished.=Auto Format finished. + +#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 +#: tools/FixEncoding.java:79 +Fix\ Encoding\ &\ Reload=Fix Encoding & Reload + +#: tools/FixEncoding.java:57 +Discard\ all\ changes\ and\ reload\ sketch?=Discard all changes and reload sketch? + +#: tools/FixEncoding.java:77 +An\ error\ occurred\ while\ trying\ to\ fix\ the\ file\ encoding.\nDo\ not\ attempt\ to\ save\ this\ sketch\ as\ it\ may\ overwrite\nthe\ old\ version.\ Use\ Open\ to\ re-open\ the\ sketch\ and\ try\ again.\n=An error occurred while trying to fix the file encoding.\nDo not attempt to save this sketch as it may overwrite\nthe old version. Use Open to re-open the sketch and try again.\n + +#: tools/Archiver.java:48 +Archive\ Sketch=Archive Sketch + +#: tools/Archiver.java:74 +Couldn't\ archive\ sketch=Couldn't archive sketch + +#: tools/Archiver.java:75 +Archiving\ the\ sketch\ has\ been\ canceled\ because\nthe\ sketch\ couldn't\ save\ properly.=Archiving the sketch has been canceled because\nthe sketch couldn't save properly. + +#: tools/Archiver.java:109 +Archive\ sketch\ as\:=Archive sketch as\: + +#: tools/Archiver.java:139 +Archive\ sketch\ canceled.=Archive sketch canceled. diff --git a/app/test/processing/app/I18NTest.java b/app/test/processing/app/I18NTest.java index cfa511c33..002810cd4 100644 --- a/app/test/processing/app/I18NTest.java +++ b/app/test/processing/app/I18NTest.java @@ -5,15 +5,11 @@ import org.junit.Test; import java.io.*; import java.util.*; -import static org.junit.Assert.assertTrue; - public class I18NTest { - private Set loadAllI18NKeys() throws IOException { + private Set loadReferenceI18NKeys() throws IOException { Properties properties = new Properties(); - for (File file : listPropertiesFiles()) { - properties.putAll(loadProperties(file)); - } + properties.putAll(loadProperties(new File(I18NTest.class.getResource("./Resources_en.properties").getFile()))); Set keys = new HashSet(); for (Object key : properties.keySet()) { keys.add(key.toString()); @@ -46,7 +42,7 @@ public class I18NTest { @Test public void ensureEveryTranslationIsComplete() throws Exception { - Set keys = loadAllI18NKeys(); + Set keys = loadReferenceI18NKeys(); Map> missingTranslationsPerFile = new HashMap>(); @@ -60,14 +56,17 @@ public class I18NTest { } if (!missingTranslationsPerFile.isEmpty()) { - for (Map.Entry> entry : missingTranslationsPerFile.entrySet()) { - System.out.println("Following translations in file " + entry.getKey() + " are missing:"); - for (String key : entry.getValue()) { + List filesWithIncompleteTranslations = new LinkedList(missingTranslationsPerFile.keySet()); + Collections.sort(filesWithIncompleteTranslations); + System.out.println("Following files have missing translations:" + filesWithIncompleteTranslations); + for (String file : filesWithIncompleteTranslations) { + + System.out.println("Following translations in file " + file + " are missing:"); + for (String key : missingTranslationsPerFile.get(file)) { System.out.println("==> '" + key.replaceAll("\n", "\\\\n").replaceAll(" ", "\\\\ ") + "'"); } System.out.println(); } - assertTrue(false); } }