Examples: adding description, layout and schematics
|
@ -0,0 +1 @@
|
|||
Read a potentiometer, print its state out to the Arduino Serial Monitor.
|
After Width: | Height: | Size: 27 KiB |
After Width: | Height: | Size: 32 KiB |
|
@ -0,0 +1 @@
|
|||
The bare minimum of code needed to start an Arduino sketch.
|
|
@ -0,0 +1 @@
|
|||
Turn an LED on and off.
|
|
@ -0,0 +1 @@
|
|||
Read a switch, print the state out to the Arduino Serial Monitor.
|
After Width: | Height: | Size: 40 KiB |
After Width: | Height: | Size: 34 KiB |
|
@ -0,0 +1 @@
|
|||
Demonstrates the use of analog output to fade an LED.
|
After Width: | Height: | Size: 37 KiB |
After Width: | Height: | Size: 31 KiB |
|
@ -0,0 +1 @@
|
|||
Reads an analog input and prints the voltage to the serial monitor.
|
After Width: | Height: | Size: 27 KiB |
After Width: | Height: | Size: 32 KiB |
|
@ -0,0 +1 @@
|
|||
Blinking an LED without using the delay() function.
|
After Width: | Height: | Size: 51 KiB |
After Width: | Height: | Size: 31 KiB |
|
@ -0,0 +1 @@
|
|||
Use a pushbutton to control an LED.
|
After Width: | Height: | Size: 40 KiB |
After Width: | Height: | Size: 26 KiB |
|
@ -0,0 +1 @@
|
|||
Read a pushbutton, filtering noise.
|
After Width: | Height: | Size: 40 KiB |
After Width: | Height: | Size: 34 KiB |
|
@ -0,0 +1 @@
|
|||
Demonstrates the use of INPUT_PULLUP with pinMode().
|
After Width: | Height: | Size: 205 KiB |
After Width: | Height: | Size: 60 KiB |
|
@ -0,0 +1 @@
|
|||
Counting the number of button pushes.
|
After Width: | Height: | Size: 40 KiB |
After Width: | Height: | Size: 34 KiB |
After Width: | Height: | Size: 83 KiB |
After Width: | Height: | Size: 50 KiB |
|
@ -0,0 +1 @@
|
|||
A three-key musical keyboard using force sensors and a piezo speaker.
|
After Width: | Height: | Size: 37 KiB |
After Width: | Height: | Size: 35 KiB |
|
@ -0,0 +1 @@
|
|||
Play a melody with a Piezo speaker.
|
After Width: | Height: | Size: 58 KiB |
After Width: | Height: | Size: 41 KiB |
|
@ -0,0 +1 @@
|
|||
Play tones on multiple speakers sequentially using the tone() command.
|
After Width: | Height: | Size: 72 KiB |
After Width: | Height: | Size: 39 KiB |
|
@ -0,0 +1 @@
|
|||
Play a pitch on a piezo speaker depending on an analog input.
|
|
@ -0,0 +1 @@
|
|||
Read an analog input pin, map the result, and then use that data to dim or brighten an LED.
|
After Width: | Height: | Size: 32 KiB |
After Width: | Height: | Size: 38 KiB |
|
@ -0,0 +1 @@
|
|||
Use a potentiometer to control the blinking of an LED.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 32 KiB |
|
@ -0,0 +1 @@
|
|||
Fade 12 LEDs on and off, one by one, using an Arduino Mega board.
|
After Width: | Height: | Size: 85 KiB |
After Width: | Height: | Size: 101 KiB |
|
@ -0,0 +1 @@
|
|||
Define a maximum and minimum for expected analog sensor values.
|
After Width: | Height: | Size: 97 KiB |
After Width: | Height: | Size: 41 KiB |
|
@ -0,0 +1 @@
|
|||
Use an analog output (PWM pin) to fade an LED.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 33 KiB |
|
@ -0,0 +1 @@
|
|||
Smooth multiple readings of an analog input.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 32 KiB |
|
@ -0,0 +1 @@
|
|||
Demonstrates Arduino's advanced serial output functions.
|
|
@ -0,0 +1 @@
|
|||
Move the mouse to change the brightness of an LED.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 31 KiB |
|
@ -0,0 +1 @@
|
|||
Send data to the computer and graph it in Processing.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 32 KiB |
|
@ -0,0 +1 @@
|
|||
Send MIDI note messages serially.
|
After Width: | Height: | Size: 41 KiB |
After Width: | Height: | Size: 26 KiB |
|
@ -0,0 +1 @@
|
|||
Use two of the serial ports available on the Arduino Mega.
|
|
@ -0,0 +1 @@
|
|||
Turn a LED on and off by sending data to your Arduino from Processing or Max/MSP.
|
After Width: | Height: | Size: 51 KiB |
After Width: | Height: | Size: 31 KiB |
|
@ -0,0 +1 @@
|
|||
Parse a comma-separated string of ints to fade an LED.
|
After Width: | Height: | Size: 29 KiB |
|
@ -0,0 +1 @@
|
|||
Send multiple variables using a call-and-response (handshaking) method.
|
After Width: | Height: | Size: 65 KiB |
After Width: | Height: | Size: 44 KiB |
|
@ -0,0 +1 @@
|
|||
Send multiple variables using a call-and-response (handshaking) method, and ASCII-encode the values before sending.
|
After Width: | Height: | Size: 65 KiB |
After Width: | Height: | Size: 44 KiB |
|
@ -0,0 +1 @@
|
|||
Demonstrates the use of SerialEvent().
|
|
@ -0,0 +1 @@
|
|||
Send multiple variables from Arduino to your computer and read them in Processing or Max/MSP.
|
After Width: | Height: | Size: 120 KiB |
After Width: | Height: | Size: 41 KiB |
|
@ -0,0 +1 @@
|
|||
A variation on the For Loop example that demonstrates how to use an array.
|
After Width: | Height: | Size: 90 KiB |
After Width: | Height: | Size: 49 KiB |
|
@ -0,0 +1 @@
|
|||
Controlling multiple LEDs with a for loop and.
|
After Width: | Height: | Size: 90 KiB |
After Width: | Height: | Size: 49 KiB |
|
@ -0,0 +1 @@
|
|||
How to use an if statement to change output conditions based on changing input conditions.
|
After Width: | Height: | Size: 42 KiB |
After Width: | Height: | Size: 36 KiB |
|
@ -0,0 +1 @@
|
|||
How to use a while loop to calibrate a sensor while a button is being read.
|
After Width: | Height: | Size: 59 KiB |
After Width: | Height: | Size: 44 KiB |
After Width: | Height: | Size: 69 KiB |
After Width: | Height: | Size: 35 KiB |
|
@ -0,0 +1 @@
|
|||
How to choose between a discrete number of values.
|