Added example BridgeNew

hardware/arduino/avr/libraries/Bridge/examples/BridgeNew/BridgeNew.ino

@@ -0,0 +1,177 @@
+
+// Possible commands are listed here:
+//
+// "digital/13"     -> digitalRead(13)
+// "digital/13/1"   -> digitalWrite(13, HIGH)
+// "analog/2/123"   -> analogWrite(2, 123)
+// "analog/2"       -> analogRead(2)
+// "mode/13/input"  -> pinMode(13, INPUT)
+// "mode/13/output" -> pinMode(13, OUTPUT)
+
+#include <Bridge.h>
+#include <YunServer.h>
+
+// Listen on port 5555, the webserver on the Yun
+// will forward there all the HTTP requests for us.
+YunServer server(5555);
+
+void setup() {
+  Serial.begin(9600);
+
+  // Bridge startup
+  pinMode(13,OUTPUT);
+  digitalWrite(13, LOW);
+  Bridge.begin();
+  digitalWrite(13, HIGH);
+
+  // Listen for incoming connection only from localhost
+  // (no one from the external network could connect)
+  server.listenOnLocalhost();
+  server.begin();
+}
+
+void loop() {
+  // Get clients coming from server
+  YunClient client = server.accept();
+
+  // There is a new client?
+  if (client) {
+    // Process request
+    process(client);
+
+    // Close connection and free resources.
+    client.stop();
+  }
+
+  delay(50); // Poll every 50ms
+}
+
+void process(YunClient client) {
+  // discard the first slash '/' character from the URL
+  client.read();
+
+  // read the command
+  String command = client.readStringUntil('/');
+
+  // is "digital" command?
+  if (command == "digital") {
+    digitalCommand(client);
+  }
+
+  // is "analog" command?
+  if (command == "analog") {
+    analogCommand(client);
+  }
+
+  // is "mode" command?
+  if (command == "mode") {
+    modeCommand(client);
+  }
+}
+
+void digitalCommand(YunClient client) {
+  int pin, value;
+
+  // Read pin number
+  pin = client.parseInt();
+
+  // If the next character is a '/' it means we have an URL
+  // with a value like: "/digital/13/1"
+  if (client.read() == '/') {
+    value = client.parseInt();
+    digitalWrite(pin, value);
+  } 
+  else {
+    value = digitalRead(pin);
+  }
+
+  // Send feedback to client
+  client.print(F("Pin D"));
+  client.print(pin);
+  client.print(F(" set to "));
+  client.println(value);
+
+  // Update datastore key with the current pin value
+  String key = "D";
+  key += pin;
+  Bridge.put(key, String(value));
+}
+
+void analogCommand(YunClient client) {
+  int pin, value;
+
+  // Read pin number
+  pin = client.parseInt();
+
+  // If the next character is a '/' it means we have an URL
+  // with a value like: "/analog/5/120"
+  if (client.read() == '/') {
+    // Read value and execute command
+    value = client.parseInt();
+    analogWrite(pin, value);
+
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" set to analog "));
+    client.println(value);
+
+    // Update datastore key with the current pin value
+    String key = "D";
+    key += pin;
+    Bridge.put(key, String(value));
+  }
+  else {
+    // Read analog pin
+    value = analogRead(pin);
+
+    // Send feedback to client
+    client.print(F("Pin A"));
+    client.print(pin);
+    client.print(F(" reads analog "));
+    client.println(value);
+
+    // Update datastore key with the current pin value
+    String key = "A";
+    key += pin;
+    Bridge.put(key, String(value));
+  }
+}
+
+void modeCommand(YunClient client) {
+  int pin;
+
+  // Read pin number
+  pin = client.parseInt();
+
+  // If the next character is not a '/' we have a malformed URL
+  if (client.read() != '/') {
+    client.println(F("error"));
+    return;
+  }
+
+  String mode = client.readStringUntil('\r');
+
+  if (mode == "input") {
+    pinMode(pin, INPUT);
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" configured as INPUT!"));
+    return;
+  }
+
+  if (mode == "output") {
+    pinMode(pin, OUTPUT);
+    // Send feedback to client
+    client.print(F("Pin D"));
+    client.print(pin);
+    client.print(F(" configured as OUTPUT!"));
+    return;
+  }
+
+  client.print(F("error: invalid mode "));
+  client.print(mode);
+}
+
+