mirror of https://github.com/noisymime/Arduino.git
Updating the readme with changes for 0007 and with bullets (*) for old versions.
This commit is contained in:
David A. Mellis
parent
4c08c0c249
commit
e5e6639cc9
187
readme.txt
187
readme.txt
|
|
@ -13,21 +13,22 @@ To report a bug or a make a suggestions, go to:
|
|||
[software] http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?board=swbugs
|
||||
|
||||
INSTALLATION
|
||||
Detailed instructions are in reference/howto.html.
|
||||
Detailed instructions are in reference/Guide_Windows.html and
|
||||
reference/Guide_MacOSX.html. For Linux, see the Arduino playground:
|
||||
http://www.arduino.cc/playground/Learning/Linux
|
||||
|
||||
If you are using a USB Arduino, you will need to install the drivers for the
|
||||
FTDI chip on the board. These can be found in the drivers/ directory.
|
||||
|
||||
* On Windows, you will need to unzip FTDI USB Drivers.zip. Then plug in the
|
||||
Arduino board and point the Windows Add Hardware wizard to the FTDI USB
|
||||
Drivers directory.
|
||||
* On Windows, plug in the Arduino board and point the Windows Add Hardware
|
||||
wizard to the drivers/FTDI USB Drivers sub-directory of the Arduino
|
||||
application directory.
|
||||
|
||||
* On the Mac, mount the FTDIUSBSerialDriver_v2_1_6.dmg (on PPC Macs) or the
|
||||
FTDIUSBSerialDriver_v2_2_6_Intel.dmg (on Intel Macs) disk image and run the
|
||||
included FTDIUSBSerialDriver.pkg. Also run the macosx_setup.command (after
|
||||
moving the Arduino distribution to your /Applications folder). It corrects
|
||||
permission on a few files for use with the serial port and will prompt you
|
||||
for your password. You may need to reboot after running this script.
|
||||
included FTDIUSBSerialDriver.pkg. You will need to restart your computer.
|
||||
|
||||
* On Linux, drivers are included in kernel versions 2.4.20 or greater.
|
||||
|
||||
CREDITS
|
||||
Arduino is an open source project, owned by nobody and supported by many.
|
||||
|
|
@ -45,111 +46,117 @@ from Processing and Wiring.
|
|||
|
||||
UPDATES
|
||||
|
||||
0007
|
||||
0007 - 2006.12.25
|
||||
|
||||
Added attachInterrupt() and detachInterrupt() functions for handling of
|
||||
external interrupts on pins 2 and 3.
|
||||
Implemented shiftOut() routine; see reference for details.
|
||||
Replaced avr-lib's uart routines with custom code for handling serial
|
||||
communication and modified C++ serial commands to call the C serial commands,
|
||||
saving ~1 KB of space; the code may behave slightly differently in border
|
||||
cases (e.g. non-standard speeds, or on overflow).
|
||||
Adding Sonar library for controlling Parallax Ultrasonic PING))) sensors.
|
||||
Defining binary constants: e.g. B1010 is 6.
|
||||
Digital pins 0 and 1 can be used for i/o until a call to Serial.begin().
|
||||
* Smaller core (about 3.5 KB instead of 4.5 KB).
|
||||
* Added a SoftwareSerial library (thanks to Antonio, Heather Dewey-Hagborg, and
|
||||
bigengineer for their help).
|
||||
* Implemented a Serial.flush() routine; see reference for details.
|
||||
* Digital pins 0 and 1 can be used for i/o until a call to Serial.begin().
|
||||
* Replaced avr-lib's uart routines with custom code for handling serial
|
||||
communication and modified C++ serial commands to call the C serial commands;
|
||||
the code may behave slightly differently in border cases (e.g. non-standard
|
||||
speeds, or on overflow).
|
||||
* Added attachInterrupt() and detachInterrupt() functions for handling of
|
||||
external interrupts on pins 2 and 3.
|
||||
* Implemented shiftOut() routine; see reference for details.
|
||||
* Defining binary constants: e.g. B1010 is 6.
|
||||
* Mac versions no longer require running of the macosx_setup.command script.
|
||||
* Windows version comes with the FTDI USB drivers already unzipped.
|
||||
|
||||
0006 - 2006.10.21
|
||||
|
||||
Mac version no longer requires Java 1.5, meaning it should run on 10.3.9.
|
||||
Added support for analog inputs 6 and 7 and pwm on pins 5 and 6 on the
|
||||
on the ATmega168 used in the Arduino Mini (extra analog inputs not available
|
||||
in DIP ATmega168s).
|
||||
You now select the baud rate for the serial monitor from within the editor
|
||||
status bar when the serial monitor is running instead of from the Tools menu.
|
||||
Pressing enter within the serial monitor edit box no longer appends a newline
|
||||
to the message sent to the board.
|
||||
Included the Wire (TWI) library from Wiring.
|
||||
Updated the reference.
|
||||
* Mac version no longer requires Java 1.5, meaning it should run on 10.3.9.
|
||||
* Added support for analog inputs 6 and 7 and pwm on pins 5 and 6 on the
|
||||
on the ATmega168 used in the Arduino Mini (extra analog inputs not available
|
||||
in DIP ATmega168s).
|
||||
* You now select the baud rate for the serial monitor from within the editor
|
||||
status bar when the serial monitor is running instead of from the Tools menu.
|
||||
* Pressing enter within the serial monitor edit box no longer appends a newline
|
||||
to the message sent to the board.
|
||||
* Included the Wire (TWI) library from Wiring.
|
||||
* Updated the reference.
|
||||
|
||||
0005 - 2006.09.26
|
||||
|
||||
Applied patch from Hans Steiner to improve Linux support by searching for avr
|
||||
tools in the user's path instead of expecting them at a fixed location.
|
||||
Added an upload.verbose preference for help in debugging.
|
||||
ATmega168 support!
|
||||
New Wiring-compatible randomSeed(), random(max) and random(min, max) functions
|
||||
(except operating on longs instead of floats).
|
||||
Fixed bug that sometimes caused uploading of old versions of a sketch.
|
||||
Serial monitor nows include an interface to send messages to the Arduino
|
||||
board. Pressing return appends a newline, pushing the send button doesn't.
|
||||
Now displaying "burning bootloader..." and "compiling..." status messages.
|
||||
* Applied patch from Hans Steiner to improve Linux support by searching for avr
|
||||
tools in the user's path instead of expecting them at a fixed location.
|
||||
* Added an upload.verbose preference for help in debugging.
|
||||
* ATmega168 support!
|
||||
* New Wiring-compatible randomSeed(), random(max) and random(min, max) functions
|
||||
(except operating on longs instead of floats).
|
||||
* Fixed bug that sometimes caused uploading of old versions of a sketch.
|
||||
* Serial monitor nows include an interface to send messages to the Arduino
|
||||
board. Pressing return appends a newline, pushing the send button doesn't.
|
||||
* Now displaying "burning bootloader..." and "compiling..." status messages.
|
||||
|
||||
0004 - 2006.04.26
|
||||
|
||||
Main sketch is now compiled as C++ (instead of C).
|
||||
Updated avr toolchain.
|
||||
printInteger(), printHex(), etc. now handle longs.
|
||||
millis() fixed (now overflows after days, not minutes)
|
||||
Fixed path to java in Windows run.bat.
|
||||
Added Matrix and Sprite libraries (written with Nicholas Zambetti).
|
||||
PWM now working on pin 11 (in addition to pins 9 and 10).
|
||||
Slowed PWM frequency (on all three PWM pins) to 1KHz.
|
||||
Now give an error if compiled sketch is too big.
|
||||
Fixed abs(), min(), max(), and constrain() macros.
|
||||
Added menu items to the IDE to burn bootloader.
|
||||
Now display binary sketch size on upload, and give error if too big.
|
||||
Added C++ serial library.
|
||||
Resynced with Processing/Wiring IDE code (improved auto-format, faster logging
|
||||
to serial monitor console, other bug fixes)
|
||||
New library system.
|
||||
Updated to latest version of the RXTX serial library; Mac users will need to
|
||||
rerun macosx_setup.command.
|
||||
* Main sketch is now compiled as C++ (instead of C).
|
||||
* Updated avr toolchain.
|
||||
* printInteger(), printHex(), etc. now handle longs.
|
||||
* millis() fixed (now overflows after days, not minutes)
|
||||
* Fixed path to java in Windows run.bat.
|
||||
* Added Matrix and Sprite libraries (written with Nicholas Zambetti).
|
||||
* PWM now working on pin 11 (in addition to pins 9 and 10).
|
||||
* Slowed PWM frequency (on all three PWM pins) to 1KHz.
|
||||
* Now give an error if compiled sketch is too big.
|
||||
* Fixed abs(), min(), max(), and constrain() macros.
|
||||
* Added menu items to the IDE to burn bootloader.
|
||||
* Now display binary sketch size on upload, and give error if too big.
|
||||
* Added C++ serial library.
|
||||
* Resynced with Processing/Wiring IDE code (improved auto-format, faster logging
|
||||
to serial monitor console, other bug fixes)
|
||||
* New library system.
|
||||
* Updated to latest version of the RXTX serial library; Mac users will need to
|
||||
rerun macosx_setup.command.
|
||||
|
||||
0003 - 2006.01.16
|
||||
|
||||
API Changes
|
||||
Reversed the analog input pins to correspond to newer boards. This means
|
||||
a call, for example, to analogRead(0) must be changed to analogRead(5) in
|
||||
order to read the same physical pin.
|
||||
Added a printNewline() function (which sends '\n' = ASCII 10).
|
||||
* Reversed the analog input pins to correspond to newer boards. This means
|
||||
a call, for example, to analogRead(0) must be changed to analogRead(5) in
|
||||
order to read the same physical pin.
|
||||
* Added a printNewline() function (which sends '\n' = ASCII 10).
|
||||
|
||||
New Stuff
|
||||
Reference is included (features native to C not yet documented).
|
||||
Serial monitor added (click the toolbar button to turn it on or off). Baud
|
||||
rate is controlled by the Serial Monitor Baud Rate Menu, defaults to 9600. Icon
|
||||
and implementation from Wiring.
|
||||
Serial port menu now automatically refreshes when opened.
|
||||
New blue color scheme and icons courtesy of Noah Shibley (colors are hardcoded
|
||||
into the source to ensure consistency with image files).
|
||||
Keyspan and FTDI USB drivers included with Mac and Windows distributions.
|
||||
* Reference is included (features native to C not yet documented).
|
||||
* Serial monitor added (click the toolbar button to turn it on or off). Baud
|
||||
rate is controlled by the Serial Monitor Baud Rate Menu, defaults to 9600.
|
||||
Icon and implementation from Wiring.
|
||||
* Serial port menu now automatically refreshes when opened.
|
||||
* New blue color scheme and icons courtesy of Noah Shibley (colors are hardcoded
|
||||
into the source to ensure consistency with image files).
|
||||
* Keyspan and FTDI USB drivers included with Mac and Windows distributions.
|
||||
|
||||
Bug Fixes
|
||||
millis() now updates every millisecond instead of every second.
|
||||
Bootloader included with Windows distribution (it was already in the Mac dist).
|
||||
Updated icon of the Windows executable.
|
||||
Now flushing the serial port before uploading (should fix some errors).
|
||||
Improved accuracy of the delayMicroseconds() function.
|
||||
* millis() now updates every millisecond instead of every second.
|
||||
* Bootloader included with Windows distribution (it was already in the Mac
|
||||
dist).
|
||||
* Updated icon of the Windows executable.
|
||||
* Now flushing the serial port before uploading (should fix some errors).
|
||||
* Improved accuracy of the delayMicroseconds() function.
|
||||
|
||||
Other
|
||||
Upload rate no longer selectable from a menu within the IDE. Instead, edit the
|
||||
serial.download_rate item in the preferences.txt file.
|
||||
Created Xcode project for building Arduino on the Mac (doesn't yet regenerate
|
||||
the grammar files or package the distribution); active target should be "App".
|
||||
Removed unused or unimplemented items from menus.
|
||||
* Upload rate no longer selectable from a menu within the IDE. Instead, edit
|
||||
the serial.download_rate item in the preferences.txt file.
|
||||
* Created Xcode project for building Arduino on the Mac (doesn't yet regenerate
|
||||
the grammar files or package the distribution); active target should be "App".
|
||||
* Removed unused or unimplemented items from menus.
|
||||
|
||||
0002 - 2005.10.05
|
||||
|
||||
New build process no longer uses makefiles; now controlled by preferences.txt.
|
||||
core/ replaced with targets/; can now link against Wiring libraries.
|
||||
Replaced print() with printString, printInteger, printHex, printByte, etc.
|
||||
Added menu for selecting serial port speed.
|
||||
Updated icon.
|
||||
Bootloader shrunk to less than 1 KB; fuses updated accordingly.
|
||||
Added serialRead(), serialAvailable(), and delayMicroseconds().
|
||||
* New build process no longer uses makefiles; now controlled by preferences.txt.
|
||||
* core/ replaced with targets/; can now link against Wiring libraries.
|
||||
* Replaced print() with printString, printInteger, printHex, printByte, etc.
|
||||
* Added menu for selecting serial port speed.
|
||||
* Updated icon.
|
||||
* Bootloader shrunk to less than 1 KB; fuses updated accordingly.
|
||||
* Added serialRead(), serialAvailable(), and delayMicroseconds().
|
||||
|
||||
0001 - 2005.08.25
|
||||
|
||||
This is the first released of the unified IDE + language library
|
||||
it's a terrible hack... but it works. at the moment it's in alpha stage
|
||||
but it can be used to work.
|
||||
The processing preprocessor is included but not used.
|
||||
* This is the first released of the unified IDE + language library
|
||||
it's a terrible hack... but it works. at the moment it's in alpha stage
|
||||
but it can be used to work.
|
||||
* The processing preprocessor is included but not used.
|
||||
|
|
|
|||
Loading…
Reference in New Issue