diff --git a/build/shared/dist/examples/Loop/Loop.pde b/build/shared/dist/examples/Loop/Loop.pde
deleted file mode 100644
index 7b28cf37e..000000000
--- a/build/shared/dist/examples/Loop/Loop.pde
+++ /dev/null
@@ -1,56 +0,0 @@
- /*
-  Loop
- 	
- Lights multiple LEDs in sequence, then in reverse.  Demonstrates
- the use of a for() loop and arrays.
- 
-  	
- The circuit:
- * LEDs attached from pin 2 through 7 to ground
- 
-  
- created  23 Sep 2007
- by David A. Mellis
- modified 17 Jun 2009
- by Tom Igoe
-
- 	
- http://www.arduino.cc/en/Tutorial/Loop
- 
- */
-
-int timer = 100;                   // The higher the number, the slower the timing.
-int pins[] = { 2, 3, 4, 5, 6, 7 }; // an array of pin numbers
-int pinCount = 6;                  // the number of pins (i.e. the length of the array)
-
-void setup() {
-  // the array elements are numbered from 0 to num_pins - 1:
-  for (int thisPin = 0; thisPin < pinCount; i++)  { 
-  	// set each pin as an output:
-    pinMode(pins[thisPin], OUTPUT);      
-    }
-}
-
-void loop() {
-  // loop through the array:
-  for (int thisPin = 0; thisPin < pinCount; thisPin++) {
-    // turn on the pin with the array element's pin number
-    // turning it on:
-    digitalWrite(pins[thisPin], HIGH);  
-    // pause: 
-    delay(timer);                  
-    // and turn it off:
-    digitalWrite(pins[thisPin], LOW);    
-  }
-  
-  // do the same loop in reverse:
-   for (int thisPin = pinCount; thisPin >= 0; thisPin--) {
-    // turn on the pin with the array element's pin number
-    // turning it on:
-    digitalWrite(pins[thisPin], HIGH);  
-    // pause: 
-    delay(timer);                  
-    // and turn it off:
-    digitalWrite(pins[thisPin], LOW);    
-  }
-}
\ No newline at end of file