Adding to the todo list and readme; fixing a bit of indentation.

hardware/cores/arduino/wiring.c

@@ -66,7 +66,7 @@ void delayMicroseconds(unsigned int us)
 	//delay_us(us);
 
 #if F_CPU >= 16000000L
-    // for the 16 MHz clock on most Arduino boards
+	// for the 16 MHz clock on most Arduino boards
 
 	// for a one-microsecond delay, simply return.  the overhead
 	// of the function call yields a delay of approximately 1 1/8 us.
@@ -81,11 +81,11 @@ void delayMicroseconds(unsigned int us)
 	// account for the time taken in the preceeding commands.
 	us -= 2;
 #else
-    // for the 8 MHz internal clock on the ATmega168
+	// for the 8 MHz internal clock on the ATmega168
 
-    // for a one- or two-microsecond delay, simply return.  the overhead of
+	// for a one- or two-microsecond delay, simply return.  the overhead of
-    // the function calls takes more than two microseconds.  can't just
+	// the function calls takes more than two microseconds.  can't just
-    // subtract two, since us is unsigned; we'd overflow.
+	// subtract two, since us is unsigned; we'd overflow.
 	if (--us == 0)
 		return;
 	if (--us == 0)
@@ -96,9 +96,9 @@ void delayMicroseconds(unsigned int us)
 	// delay requested.
 	us <<= 1;
     
-    // partially compensate for the time taken by the preceeding commands.
+	// partially compensate for the time taken by the preceeding commands.
-    // we can't subtract any more than this or we'd overflow w/ small delays.
+	// we can't subtract any more than this or we'd overflow w/ small delays.
-    us--;
+	us--;
 #endif
 
 	// disable interrupts, otherwise the timer 0 overflow interrupt that

readme.txt

@@ -53,12 +53,14 @@ UPDATES
 * Added analogReference() function.
 * Added interrupts() and noInterrupts() functions.
 * Added degrees() and radians() functions.
+* Added timeout parameter (in microseconds) to pulseIn(); default is 1 second.
 * Support for uploading sketch using a programmer (upload.using preference).
 * Improved detection of functions that need prototyping.
 * Placing function prototypes after #include's and #define's.
 * No longer moving #include statements to the top of the sketch.
 * Including a working version of the Firmata firmware.
-* Can now drag .pde files onto the Arduino dock icon.
+* Can now drag .pde files onto the Arduino dock icon on Mac OS X.
+  Thanks to Peter Sgouros.
 * New script for downloading the reference from Tom Pollard.  Thanks Tom!
 * Miscellaneous Mac OS X and other patches from Wim Lewis.  Thanks Wim!
 

todo.txt

@@ -9,7 +9,10 @@ Improve preprocessing of sketches:
  - [done] Don't move #include statements.
  - [done] Better determine which functions need prototypes
 Update version of the FTDI drivers (Windows).
-Add timeout parameter to pulseIn().
+Move AVR ISP and giveio drivers elsewhere (Windows).
+Add #defines for the analog input pins.
+Deal with shorter screens (e.g. ASUS EEPC).
+[done] Add timeout parameter to pulseIn().
 [done] Update version of the FTDI drivers (Mac).
 [done] Allow disabling of serial flushing before upload (for the Arduino BT).
 [done] Modify parallel port programmer burning (add -F, lower or remove delay).
@@ -30,6 +33,8 @@ Incorporate ladyada's new SoftwareSerial library.
 Good way to receive multiple values / complex messages over the serial port.
 Floating point support in the map() function.
 Consider moving millis() to timer 1, and configuring it so the interrupt is generated once a millisecond.
+Fix millis() so it overflows on a nice variable-size boundary.
+Fix delayMicroseconds(0).
 Add sleep function(s).
 Add SPI library.
 Add pulseOut(), etc. functions from Wiring.
@@ -44,6 +49,7 @@ Include Arduino as AVR-ISP sketch in hardware/firmwares.
 
 COMPUTER
 
+Multiple sketch windows.
 Easier library discovery and installation.
 Easier board installation.
 Clean up Library and LibraryManager.