4cf5f4e246
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-04-06 07:00:13 -04:00
ad1d5ca89d
modified Preferences.java to include one of the strings into the translation files
2012-04-04 18:24:43 +02:00
f66b83dd35
Revert "close SerialMonitor when port goes away suddenly (as when user presses Leonardo reset button)"
...
This reverts commit e9a00eb38f
2012-04-03 09:20:47 -04:00
e9a00eb38f
close SerialMonitor when port goes away suddenly (as when user presses Leonardo reset button)
2012-04-01 14:39:52 -04:00
232c7808be
Custom error messages for use of Mouse and Keyboard on non-Leonardo boards.
2012-03-31 14:50:56 -04:00
8e176b0084
selectively suppress unwanted avrdude output for Leonardo when not verbose uploading is disabled
2012-03-30 22:24:40 -04:00
e90cb3650d
tweaked verbosity level for avrdude on Leonardo uploads
2012-03-29 22:31:01 -04:00
61c5176681
only print Leonardo upload port hunting status if verbose uploading is selected. also cleaned up other verbose message handling for Leonardo upload progress.
2012-03-29 20:01:45 -04:00
d169114205
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-03-14 15:40:29 -04:00
d3d94b157e
updated avrdudeUploader with new path for Caterina
2012-03-08 14:23:45 -05:00
d06710ebe5
Also delaying after auto-reset on Windows.
...
Windows seemed to have the same issue as Linux: scanning for the ports
prevented the reset from happening (i.e. it opened the port or
otherwise raised DTR).
2012-03-06 16:33:29 -05:00
2cff5593ec
Adding delay on Linux before looking for Leonardo bootloader.
2012-03-04 20:42:44 -05:00
eda8f1301f
Lowering non-Windows timeout for assuming Leonardo has reset.
...
On Mac and Linux, the serial port should disappear fairly quickly. So
if we see the selected port after 500 ms, it should be the bootloader
(not the sketch still).
2012-03-04 19:38:53 -05:00
4ab241ceb6
Revert "Speed up on serial port touch"
...
This reverts commit a5404125f6
2012-03-04 19:29:07 -05:00
9531c47c43
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-03-03 20:27:27 -05:00
a292677108
Adding preference for disabling verification on upload (Nathan Seidle)
...
Adds a checkbox to the preferences dialog that controls whether or not
to verify code on upload via serial (verification still always occurs
when uploading using a programmer). It is checked by default to match
current behavior.
2012-03-03 13:54:10 -05:00
8a35793794
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
...
Conflicts:
.gitignore
2012-03-03 13:28:39 -05:00
a6eb9ea5eb
Fixing double- and triple-click selection behavior (Peter Lewis)
...
Double clicking selects words, double-clicking and dragging does too.
Triple-click for lines.
http://code.google.com/p/arduino/issues/detail?id=824
2012-03-02 18:06:29 -05:00
b133faa68f
Commenting out extraneous println().
2012-03-02 17:57:10 -05:00
0db8bdbbb0
Find / Replace dialog cleanup and improvements (Peter Lewis)
...
Adds Find Previous and Use Selection for Find; various other cleanups.
Changes Mac keyboard shortcut for Redo from Command-Y to
Command-Shift-Z.
http://code.google.com/p/arduino/issues/detail?id=825
2012-03-02 17:56:17 -05:00
599a9052c9
Updating version to 101.
2012-03-02 17:47:57 -05:00
f1f2f8e49c
Lowering minimum size for Editor text area.
...
This should make it possible to shrink the overall IDE window without
losing the scroll bars on the text pane.
http://code.google.com/p/arduino/issues/detail?id=52
2012-03-11 15:05:44 -04:00
24916baf70
Don't insert newline in serial monitor keyboard shortcut (Lars J. Nielsen)
...
http://code.google.com/p/arduino/issues/detail?id=279
2012-03-11 13:50:47 -04:00
12eb56ac77
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-28 22:50:35 -05:00
784232c6a5
Adding 32-bit version of AVR toolchain on Linux (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=300
2012-02-28 14:50:28 -05:00
b861ae7767
Lowering upload timeout and per-iteration delay in Leonardo upload.
2012-02-28 12:59:52 -05:00
a5404125f6
Speed up on serial port touch
2012-02-28 18:28:34 +01:00
5d309dbb46
Added error messages for Leonardo upload
2012-02-27 16:32:24 +01:00
507921fd0f
Changes in upload procedure (WIP)
2012-02-27 14:51:19 +01:00
60f8e10bf9
Reviewed IDE upload procedure for Leonardo bootloader
2012-02-24 17:30:29 +01:00
9ec558ba8d
AvrdudeUploader auto reset improvements: auto-detect new port on Windows, big speedup on Windows and Mac/Linux
...
IDE auto-detects new port now instead of prompting user. Better handling of delay on all platforms dramatically speeds up the upload sequence.
2012-02-22 22:35:28 -05:00
65ddc6c43b
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-22 15:19:32 -05:00
6ab18ea1cc
Lowering minimum editor heights for netbooks
...
http://code.google.com/p/arduino/issues/detail?id=52
2012-02-14 16:13:39 -08:00
13ef2908b4
Added serial.port.file preference for linux
2012-02-13 17:56:16 +01:00
bab3c5eade
Leonardo auto-reset-and-upload changes for Windows (explanation below)
...
On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated.
Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13 00:56:06 -05:00
5c53796cec
added static touchPort() method to Serial class.
...
Used by Leonardo to quickly tap the comm port to initiate a reset without the potential problems of doing a full Serial object construct/dispose with all listeners, etc.
2012-02-13 00:37:21 -05:00
cb8e184ab8
Using setMinimumSize() instead of window listener for editor windows.
...
http://code.google.com/p/arduino/issues/detail?id=52
2012-02-12 19:58:40 -05:00
731ee15f0e
increased wait time for Leonardo uploading to 8 seconds
2012-02-06 15:27:44 -05:00
043c190876
Upload size computation is now parametric
2012-02-06 00:51:24 +01:00
a141a1dc1e
Upload/Program with configurable generic command line tools (wip)
2012-02-05 23:17:15 +01:00
1e0700b536
fixed starting Leonardo bootloader from sketch
...
AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03 21:42:46 -05:00
30ec90aca3
First attemp to generalize upload for mutiplatform IDE
2012-02-01 14:34:29 +01:00
b295ab911e
Some runtime infos now resides in preferences under runtime.* keys
2012-02-01 14:27:41 +01:00
ab00a1360f
Fixed preference setting whe changing board
2012-02-01 14:25:26 +01:00
65afe35433
Skip reserved tools folder when detecting TargetPackages
2012-01-14 14:59:14 +01:00
fe001fdaba
Factored out some common build variables
2012-01-13 20:39:48 +01:00
4a0260e2b5
Refactored corePath field in Compiler class
2012-01-13 18:17:28 +01:00
0dd5309bc0
Recursive properties string-replace
2012-01-13 14:10:34 +01:00
d2734fa8e8
Fixed eclipse project files
2012-01-11 13:59:39 +01:00
a50431e3a4
Merge branch 'new-extension' into HEAD
...
Conflicts:
.classpath
.settings/org.eclipse.jdt.core.prefs
.settings/org.eclipse.jdt.ui.prefs
app/src/processing/app/Base.java
app/src/processing/app/Editor.java
app/src/processing/app/Sketch.java
app/src/processing/app/debug/Compiler.java
build/build.xml
build/shared/lib/preferences.txt
hardware/arduino/avr/boards.txt
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168.c
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/arduino/avr/bootloaders/atmega/Makefile
hardware/arduino/avr/bootloaders/atmega8/ATmegaBOOT.c
hardware/arduino/avr/bootloaders/atmega8/ATmegaBOOT.hex
hardware/arduino/avr/bootloaders/atmega8/Makefile
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168.c
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168.hex
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/arduino/avr/bootloaders/bt/Makefile
hardware/arduino/avr/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/arduino/avr/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/arduino/avr/bootloaders/lilypad/src/Makefile
hardware/arduino/avr/bootloaders/optiboot/optiboot.c
hardware/arduino/avr/bootloaders/optiboot/optiboot_atmega328-Mini.hex
hardware/arduino/avr/bootloaders/stk500v2/License.txt
hardware/arduino/avr/bootloaders/stk500v2/Makefile
hardware/arduino/avr/bootloaders/stk500v2/STK500V2.pnproj
hardware/arduino/avr/bootloaders/stk500v2/STK500V2.pnps
hardware/arduino/avr/bootloaders/stk500v2/avrinterruptnames.h
hardware/arduino/avr/bootloaders/stk500v2/command.h
hardware/arduino/avr/bootloaders/stk500v2/stk500boot.c
hardware/arduino/avr/bootloaders/stk500v2/stk500boot.ppg
hardware/arduino/avr/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/arduino/avr/cores/arduino/Arduino.h
hardware/arduino/avr/cores/arduino/HardwareSerial.cpp
hardware/arduino/avr/cores/arduino/HardwareSerial.h
hardware/arduino/avr/cores/arduino/IPAddress.cpp
hardware/arduino/avr/cores/arduino/IPAddress.h
hardware/arduino/avr/cores/arduino/Printable.h
hardware/arduino/avr/cores/arduino/Tone.cpp
hardware/arduino/avr/cores/arduino/WCharacter.h
hardware/arduino/avr/cores/arduino/WInterrupts.c
hardware/arduino/avr/cores/arduino/WMath.cpp
hardware/arduino/avr/cores/arduino/WString.cpp
hardware/arduino/avr/cores/arduino/WString.h
hardware/arduino/avr/cores/arduino/binary.h
hardware/arduino/avr/cores/arduino/wiring.c
hardware/arduino/avr/cores/arduino/wiring_analog.c
hardware/arduino/avr/cores/arduino/wiring_digital.c
hardware/arduino/avr/cores/arduino/wiring_private.h
hardware/arduino/avr/cores/arduino/wiring_pulse.c
hardware/arduino/avr/cores/arduino/wiring_shift.c
hardware/arduino/avr/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/arduino/avr/firmwares/README.txt
hardware/arduino/avr/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/arduino/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/arduino/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/arduino/avr/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/arduino/avr/firmwares/arduino-usbdfu/Descriptors.c
hardware/arduino/avr/firmwares/arduino-usbdfu/Descriptors.h
hardware/arduino/avr/firmwares/arduino-usbdfu/makefile
hardware/arduino/avr/firmwares/arduino-usbdfu/readme.txt
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/arduino/avr/firmwares/arduino-usbserial/Board/LEDs.h
hardware/arduino/avr/firmwares/arduino-usbserial/Descriptors.c
hardware/arduino/avr/firmwares/arduino-usbserial/Descriptors.h
hardware/arduino/avr/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/arduino/avr/firmwares/arduino-usbserial/makefile
hardware/arduino/avr/firmwares/arduino-usbserial/readme.txt
hardware/arduino/avr/libraries/EEPROM/EEPROM.cpp
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
hardware/arduino/avr/libraries/EEPROM/keywords.txt
hardware/arduino/avr/libraries/Ethernet/Dhcp.cpp
hardware/arduino/avr/libraries/Ethernet/Dhcp.h
hardware/arduino/avr/libraries/Ethernet/Dns.cpp
hardware/arduino/avr/libraries/Ethernet/Dns.h
hardware/arduino/avr/libraries/Ethernet/Ethernet.cpp
hardware/arduino/avr/libraries/Ethernet/Ethernet.h
hardware/arduino/avr/libraries/Ethernet/EthernetClient.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetServer.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetUdp.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetUdp.h
hardware/arduino/avr/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino
hardware/arduino/avr/libraries/Ethernet/examples/ChatServer/ChatServer.ino
hardware/arduino/avr/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
hardware/arduino/avr/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
hardware/arduino/avr/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino
hardware/arduino/avr/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/WebClient/WebClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/WebServer/WebServer.ino
hardware/arduino/avr/libraries/Ethernet/keywords.txt
hardware/arduino/avr/libraries/Ethernet/util.h
hardware/arduino/avr/libraries/Ethernet/utility/socket.cpp
hardware/arduino/avr/libraries/Ethernet/utility/socket.h
hardware/arduino/avr/libraries/Ethernet/utility/w5100.cpp
hardware/arduino/avr/libraries/Ethernet/utility/w5100.h
hardware/arduino/avr/libraries/Firmata/Boards.h
hardware/arduino/avr/libraries/Firmata/Firmata.cpp
hardware/arduino/avr/libraries/Firmata/Firmata.h
hardware/arduino/avr/libraries/Firmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/TODO.txt
hardware/arduino/avr/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/EchoString/EchoString.ino
hardware/arduino/avr/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino
hardware/arduino/avr/libraries/Firmata/keywords.txt
hardware/arduino/avr/libraries/SD/File.cpp
hardware/arduino/avr/libraries/SD/README.txt
hardware/arduino/avr/libraries/SD/SD.cpp
hardware/arduino/avr/libraries/SD/SD.h
hardware/arduino/avr/libraries/SD/examples/CardInfo/CardInfo.ino
hardware/arduino/avr/libraries/SD/examples/Datalogger/Datalogger.ino
hardware/arduino/avr/libraries/SD/examples/DumpFile/DumpFile.ino
hardware/arduino/avr/libraries/SD/examples/Files/Files.ino
hardware/arduino/avr/libraries/SD/examples/ReadWrite/ReadWrite.ino
hardware/arduino/avr/libraries/SD/examples/listfiles/listfiles.ino
hardware/arduino/avr/libraries/SD/keywords.txt
hardware/arduino/avr/libraries/SD/utility/FatStructs.h
hardware/arduino/avr/libraries/SD/utility/Sd2Card.cpp
hardware/arduino/avr/libraries/SD/utility/Sd2Card.h
hardware/arduino/avr/libraries/SD/utility/Sd2PinMap.h
hardware/arduino/avr/libraries/SD/utility/SdFat.h
hardware/arduino/avr/libraries/SD/utility/SdFatUtil.h
hardware/arduino/avr/libraries/SD/utility/SdFatmainpage.h
hardware/arduino/avr/libraries/SD/utility/SdFile.cpp
hardware/arduino/avr/libraries/SD/utility/SdInfo.h
hardware/arduino/avr/libraries/SD/utility/SdVolume.cpp
hardware/arduino/avr/libraries/SPI/SPI.cpp
hardware/arduino/avr/libraries/SPI/SPI.h
hardware/arduino/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino
hardware/arduino/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.ino
hardware/arduino/avr/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino
hardware/arduino/avr/libraries/SPI/keywords.txt
hardware/arduino/avr/libraries/Servo/Servo.cpp
hardware/arduino/avr/libraries/Servo/Servo.h
hardware/arduino/avr/libraries/Servo/examples/Knob/Knob.ino
hardware/arduino/avr/libraries/Servo/examples/Sweep/Sweep.ino
hardware/arduino/avr/libraries/Servo/keywords.txt
hardware/arduino/avr/libraries/SoftwareSerial/SoftwareSerial.cpp
hardware/arduino/avr/libraries/SoftwareSerial/SoftwareSerial.h
hardware/arduino/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
hardware/arduino/avr/libraries/SoftwareSerial/keywords.txt
hardware/arduino/avr/libraries/Wire/Wire.cpp
hardware/arduino/avr/libraries/Wire/Wire.h
hardware/arduino/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
hardware/arduino/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
hardware/arduino/avr/libraries/Wire/examples/master_reader/master_reader.ino
hardware/arduino/avr/libraries/Wire/examples/master_writer/master_writer.ino
hardware/arduino/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino
hardware/arduino/avr/libraries/Wire/examples/slave_sender/slave_sender.ino
hardware/arduino/avr/libraries/Wire/keywords.txt
hardware/arduino/avr/libraries/Wire/utility/twi.c
hardware/arduino/avr/libraries/Wire/utility/twi.h
hardware/arduino/avr/programmers.txt
hardware/arduino/avr/variants/mega/pins_arduino.h
hardware/arduino/avr/variants/micro/pins_arduino.h
hardware/arduino/avr/variants/standard/pins_arduino.h
hardware/arduino/boards.txt
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168.c
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/arduino/bootloaders/atmega/Makefile
hardware/arduino/bootloaders/atmega8/ATmegaBOOT.c
hardware/arduino/bootloaders/atmega8/ATmegaBOOT.hex
hardware/arduino/bootloaders/atmega8/Makefile
hardware/arduino/bootloaders/bt/ATmegaBOOT_168.c
hardware/arduino/bootloaders/bt/ATmegaBOOT_168.hex
hardware/arduino/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/arduino/bootloaders/bt/Makefile
hardware/arduino/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/arduino/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/arduino/bootloaders/lilypad/src/Makefile
hardware/arduino/bootloaders/optiboot/optiboot.c
hardware/arduino/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex
hardware/arduino/bootloaders/stk500v2/License.txt
hardware/arduino/bootloaders/stk500v2/Makefile
hardware/arduino/bootloaders/stk500v2/STK500V2.pnproj
hardware/arduino/bootloaders/stk500v2/STK500V2.pnps
hardware/arduino/bootloaders/stk500v2/avrinterruptnames.h
hardware/arduino/bootloaders/stk500v2/command.h
hardware/arduino/bootloaders/stk500v2/stk500boot.c
hardware/arduino/bootloaders/stk500v2/stk500boot.ppg
hardware/arduino/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/arduino/cores/arduino/Arduino.h
hardware/arduino/cores/arduino/HardwareSerial.cpp
hardware/arduino/cores/arduino/HardwareSerial.h
hardware/arduino/cores/arduino/Stream.h
hardware/arduino/cores/arduino/Tone.cpp
hardware/arduino/cores/arduino/WCharacter.h
hardware/arduino/cores/arduino/WInterrupts.c
hardware/arduino/cores/arduino/WMath.cpp
hardware/arduino/cores/arduino/WString.cpp
hardware/arduino/cores/arduino/WString.h
hardware/arduino/cores/arduino/binary.h
hardware/arduino/cores/arduino/wiring.c
hardware/arduino/cores/arduino/wiring_analog.c
hardware/arduino/cores/arduino/wiring_digital.c
hardware/arduino/cores/arduino/wiring_private.h
hardware/arduino/cores/arduino/wiring_pulse.c
hardware/arduino/cores/arduino/wiring_shift.c
hardware/arduino/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/arduino/firmwares/README.txt
hardware/arduino/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/arduino/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/arduino/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/arduino/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/arduino/firmwares/arduino-usbdfu/Descriptors.c
hardware/arduino/firmwares/arduino-usbdfu/Descriptors.h
hardware/arduino/firmwares/arduino-usbdfu/makefile
hardware/arduino/firmwares/arduino-usbdfu/readme.txt
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/arduino/firmwares/arduino-usbserial/Board/LEDs.h
hardware/arduino/firmwares/arduino-usbserial/Descriptors.c
hardware/arduino/firmwares/arduino-usbserial/Descriptors.h
hardware/arduino/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/arduino/firmwares/arduino-usbserial/makefile
hardware/arduino/firmwares/arduino-usbserial/readme.txt
hardware/arduino/pins/mega/pins_arduino.h
hardware/arduino/pins/standard/pins_arduino.h
hardware/arduino/programmers.txt
hardware/avr/boards.txt
hardware/avr/bootloaders/atmega/ATmegaBOOT_168.c
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/avr/bootloaders/atmega/Makefile
hardware/avr/bootloaders/atmega8/ATmegaBOOT.c
hardware/avr/bootloaders/atmega8/ATmegaBOOT.hex
hardware/avr/bootloaders/atmega8/Makefile
hardware/avr/bootloaders/bt/ATmegaBOOT_168.c
hardware/avr/bootloaders/bt/ATmegaBOOT_168.hex
hardware/avr/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/avr/bootloaders/bt/Makefile
hardware/avr/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/avr/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/avr/bootloaders/lilypad/src/Makefile
hardware/avr/bootloaders/optiboot/Makefile
hardware/avr/bootloaders/optiboot/makeall
hardware/avr/bootloaders/optiboot/optiboot.c
hardware/avr/bootloaders/optiboot/optiboot_atmega328.hex
hardware/avr/bootloaders/optiboot/optiboot_atmega328.lst
hardware/avr/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst
hardware/avr/bootloaders/optiboot/optiboot_diecimila.hex
hardware/avr/bootloaders/optiboot/optiboot_diecimila.lst
hardware/avr/bootloaders/optiboot/optiboot_lilypad.hex
hardware/avr/bootloaders/optiboot/optiboot_lilypad.lst
hardware/avr/bootloaders/optiboot/optiboot_lilypad_resonator.hex
hardware/avr/bootloaders/optiboot/optiboot_lilypad_resonator.lst
hardware/avr/bootloaders/optiboot/optiboot_luminet.hex
hardware/avr/bootloaders/optiboot/optiboot_luminet.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_16MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_16MHz.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_20mhz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_20mhz.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_8MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_8MHz.lst
hardware/avr/bootloaders/stk500v2/License.txt
hardware/avr/bootloaders/stk500v2/Makefile
hardware/avr/bootloaders/stk500v2/STK500V2.pnproj
hardware/avr/bootloaders/stk500v2/STK500V2.pnps
hardware/avr/bootloaders/stk500v2/avrinterruptnames.h
hardware/avr/bootloaders/stk500v2/command.h
hardware/avr/bootloaders/stk500v2/stk500boot.c
hardware/avr/bootloaders/stk500v2/stk500boot.ppg
hardware/avr/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/avr/cores/arduino/Arduino.h
hardware/avr/cores/arduino/HardwareSerial.cpp
hardware/avr/cores/arduino/HardwareSerial.h
hardware/avr/cores/arduino/Print.cpp
hardware/avr/cores/arduino/Print.h
hardware/avr/cores/arduino/Stream.h
hardware/avr/cores/arduino/WCharacter.h
hardware/avr/cores/arduino/WInterrupts.c
hardware/avr/cores/arduino/WMath.cpp
hardware/avr/cores/arduino/WString.cpp
hardware/avr/cores/arduino/WString.h
hardware/avr/cores/arduino/main.cpp
hardware/avr/cores/arduino/wiring.c
hardware/avr/cores/arduino/wiring_analog.c
hardware/avr/cores/arduino/wiring_digital.c
hardware/avr/cores/arduino/wiring_private.h
hardware/avr/cores/arduino/wiring_pulse.c
hardware/avr/cores/arduino/wiring_shift.c
hardware/avr/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/avr/firmwares/README.txt
hardware/avr/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/avr/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/avr/firmwares/arduino-usbdfu/Descriptors.c
hardware/avr/firmwares/arduino-usbdfu/Descriptors.h
hardware/avr/firmwares/arduino-usbdfu/makefile
hardware/avr/firmwares/arduino-usbdfu/readme.txt
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/avr/firmwares/arduino-usbserial/Board/LEDs.h
hardware/avr/firmwares/arduino-usbserial/Descriptors.c
hardware/avr/firmwares/arduino-usbserial/Descriptors.h
hardware/avr/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/avr/firmwares/arduino-usbserial/makefile
hardware/avr/firmwares/arduino-usbserial/readme.txt
hardware/avr/libraries/EEPROM/EEPROM.cpp
hardware/avr/libraries/EEPROM/EEPROM.h
hardware/avr/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.pde
hardware/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.pde
hardware/avr/libraries/EEPROM/examples/eeprom_write/eeprom_write.pde
hardware/avr/libraries/EEPROM/keywords.txt
hardware/avr/libraries/Ethernet/Client.cpp
hardware/avr/libraries/Ethernet/Client.h
hardware/avr/libraries/Ethernet/Dhcp.cpp
hardware/avr/libraries/Ethernet/Dhcp.h
hardware/avr/libraries/Ethernet/Dns.cpp
hardware/avr/libraries/Ethernet/Dns.h
hardware/avr/libraries/Ethernet/Ethernet.cpp
hardware/avr/libraries/Ethernet/Ethernet.h
hardware/avr/libraries/Ethernet/IPAddress.cpp
hardware/avr/libraries/Ethernet/IPAddress.h
hardware/avr/libraries/Ethernet/Server.cpp
hardware/avr/libraries/Ethernet/Server.h
hardware/avr/libraries/Ethernet/Udp.cpp
hardware/avr/libraries/Ethernet/Udp.h
hardware/avr/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.pde
hardware/avr/libraries/Ethernet/examples/ChatServer/ChatServer.pde
hardware/avr/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.pde
hardware/avr/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.pde
hardware/avr/libraries/Ethernet/examples/PachubeClient/PachubeClient.pde
hardware/avr/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.pde
hardware/avr/libraries/Ethernet/examples/TelnetClient/TelnetClient.pde
hardware/avr/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
hardware/avr/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.pde
hardware/avr/libraries/Ethernet/examples/WebClient/WebClient.pde
hardware/avr/libraries/Ethernet/examples/WebServer/WebServer.pde
hardware/avr/libraries/Ethernet/keywords.txt
hardware/avr/libraries/Ethernet/util.h
hardware/avr/libraries/Ethernet/utility/socket.cpp
hardware/avr/libraries/Ethernet/utility/socket.h
hardware/avr/libraries/Ethernet/utility/w5100.cpp
hardware/avr/libraries/Ethernet/utility/w5100.h
hardware/avr/libraries/Firmata/Boards.h
hardware/avr/libraries/Firmata/Firmata.cpp
hardware/avr/libraries/Firmata/Firmata.h
hardware/avr/libraries/Firmata/LICENSE.txt
hardware/avr/libraries/Firmata/TODO.txt
hardware/avr/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde
hardware/avr/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde
hardware/avr/libraries/Firmata/examples/AnalogFirmata/Makefile
hardware/avr/libraries/Firmata/examples/EchoString/EchoString.pde
hardware/avr/libraries/Firmata/examples/EchoString/Makefile
hardware/avr/libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde
hardware/avr/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
hardware/avr/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde
hardware/avr/libraries/Firmata/examples/ServoFirmata/Makefile
hardware/avr/libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde
hardware/avr/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile
hardware/avr/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
hardware/avr/libraries/Firmata/examples/SimpleDigitalFirmata/Makefile
hardware/avr/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde
hardware/avr/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
hardware/avr/libraries/Firmata/examples/StandardFirmata/Makefile
hardware/avr/libraries/Firmata/examples/StandardFirmata/StandardFirmata.pde
hardware/avr/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
hardware/avr/libraries/Firmata/keywords.txt
hardware/avr/libraries/SD/File.cpp
hardware/avr/libraries/SD/README.txt
hardware/avr/libraries/SD/SD.cpp
hardware/avr/libraries/SD/SD.h
hardware/avr/libraries/SD/examples/CardInfo/CardInfo.pde
hardware/avr/libraries/SD/examples/Datalogger/Datalogger.pde
hardware/avr/libraries/SD/examples/DumpFile/DumpFile.pde
hardware/avr/libraries/SD/examples/Files/Files.pde
hardware/avr/libraries/SD/examples/ReadWrite/ReadWrite.pde
hardware/avr/libraries/SD/examples/listfiles/listfiles.pde
hardware/avr/libraries/SD/keywords.txt
hardware/avr/libraries/SD/utility/FatStructs.h
hardware/avr/libraries/SD/utility/Sd2Card.cpp
hardware/avr/libraries/SD/utility/Sd2Card.h
hardware/avr/libraries/SD/utility/Sd2PinMap.h
hardware/avr/libraries/SD/utility/SdFat.h
hardware/avr/libraries/SD/utility/SdFatUtil.h
hardware/avr/libraries/SD/utility/SdFatmainpage.h
hardware/avr/libraries/SD/utility/SdFile.cpp
hardware/avr/libraries/SD/utility/SdInfo.h
hardware/avr/libraries/SD/utility/SdVolume.cpp
hardware/avr/libraries/SPI/SPI.cpp
hardware/avr/libraries/SPI/SPI.h
hardware/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.pde
hardware/avr/libraries/Servo/Servo.cpp
hardware/avr/libraries/Servo/Servo.h
hardware/avr/libraries/Servo/examples/Knob/Knob.pde
hardware/avr/libraries/Servo/examples/Sweep/Sweep.pde
hardware/avr/libraries/Servo/keywords.txt
hardware/avr/libraries/SoftwareSerial/SoftwareSerial.cpp
hardware/avr/libraries/SoftwareSerial/SoftwareSerial.h
hardware/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
hardware/avr/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
hardware/avr/libraries/SoftwareSerial/icrmacros.h
hardware/avr/libraries/SoftwareSerial/keywords.txt
hardware/avr/libraries/Wire/Wire.cpp
hardware/avr/libraries/Wire/Wire.h
hardware/avr/libraries/Wire/utility/twi.c
hardware/avr/libraries/Wire/utility/twi.h
hardware/avr/programmers.txt
hardware/avr/variants/mega/pins_arduino.h
hardware/avr/variants/standard/pins_arduino.h
hardware/sam/cores/sam/Tone.cpp.disabled
hardware/sam/cores/sam/binary.h
hardware/sam/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.pde
hardware/sam/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.pde
hardware/sam/libraries/SPI/keywords.txt
hardware/sam/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
hardware/sam/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
hardware/sam/libraries/Wire/examples/master_reader/master_reader.pde
hardware/sam/libraries/Wire/examples/master_writer/master_writer.pde
hardware/sam/libraries/Wire/examples/slave_receiver/slave_receiver.pde
hardware/sam/libraries/Wire/examples/slave_sender/slave_sender.pde
hardware/sam/libraries/Wire/keywords.txt
libraries/EEPROM/EEPROM.cpp
libraries/EEPROM/EEPROM.h
libraries/EEPROM/examples/eeprom_clear/eeprom_clear.pde
libraries/EEPROM/examples/eeprom_read/eeprom_read.pde
libraries/EEPROM/examples/eeprom_write/eeprom_write.pde
libraries/EEPROM/keywords.txt
libraries/Ethernet/Client.cpp
libraries/Ethernet/Dhcp.cpp
libraries/Ethernet/Dhcp.h
libraries/Ethernet/Dns.cpp
libraries/Ethernet/Dns.h
libraries/Ethernet/Ethernet.cpp
libraries/Ethernet/Ethernet.h
libraries/Ethernet/IPAddress.cpp
libraries/Ethernet/IPAddress.h
libraries/Ethernet/Server.cpp
libraries/Ethernet/Udp.cpp
libraries/Ethernet/Udp.h
libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.pde
libraries/Ethernet/examples/ChatServer/ChatServer.pde
libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.pde
libraries/Ethernet/examples/DnsWebClient/DnsWebClient.pde
libraries/Ethernet/examples/PachubeClient/PachubeClient.pde
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.pde
libraries/Ethernet/examples/TelnetClient/TelnetClient.pde
libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.pde
libraries/Ethernet/examples/WebClient/WebClient.pde
libraries/Ethernet/examples/WebServer/WebServer.pde
libraries/Ethernet/keywords.txt
libraries/Ethernet/util.h
libraries/Ethernet/utility/socket.cpp
libraries/Ethernet/utility/socket.h
libraries/Ethernet/utility/w5100.cpp
libraries/Ethernet/utility/w5100.h
libraries/Firmata/Boards.h
libraries/Firmata/Firmata.cpp
libraries/Firmata/Firmata.h
libraries/Firmata/LICENSE.txt
libraries/Firmata/TODO.txt
libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde
libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde
libraries/Firmata/examples/EchoString/EchoString.pde
libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde
libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde
libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde
libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde
libraries/Firmata/examples/StandardFirmata/LICENSE.txt
libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
libraries/Firmata/keywords.txt
libraries/SD/File.cpp
libraries/SD/README.txt
libraries/SD/SD.cpp
libraries/SD/SD.h
libraries/SD/examples/CardInfo/CardInfo.pde
libraries/SD/examples/Datalogger/Datalogger.pde
libraries/SD/examples/DumpFile/DumpFile.pde
libraries/SD/examples/Files/Files.pde
libraries/SD/examples/ReadWrite/ReadWrite.pde
libraries/SD/examples/listfiles/listfiles.pde
libraries/SD/keywords.txt
libraries/SD/utility/FatStructs.h
libraries/SD/utility/Sd2Card.cpp
libraries/SD/utility/Sd2Card.h
libraries/SD/utility/Sd2PinMap.h
libraries/SD/utility/SdFat.h
libraries/SD/utility/SdFatUtil.h
libraries/SD/utility/SdFatmainpage.h
libraries/SD/utility/SdFile.cpp
libraries/SD/utility/SdInfo.h
libraries/SD/utility/SdVolume.cpp
libraries/SPI/SPI.cpp
libraries/SPI/SPI.h
libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.pde
libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.pde
libraries/SPI/examples/DigitalPotControl/DigitalPotControl.pde
libraries/SPI/keywords.txt
libraries/Servo/Servo.cpp
libraries/Servo/Servo.h
libraries/Servo/examples/Knob/Knob.pde
libraries/Servo/examples/Sweep/Sweep.pde
libraries/Servo/keywords.txt
libraries/SoftwareSerial/SoftwareSerial.cpp
libraries/SoftwareSerial/SoftwareSerial.h
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
libraries/SoftwareSerial/keywords.txt
libraries/Wire/Wire.cpp
libraries/Wire/Wire.h
libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
libraries/Wire/examples/master_reader/master_reader.pde
libraries/Wire/examples/master_writer/master_writer.pde
libraries/Wire/examples/slave_receiver/slave_receiver.pde
libraries/Wire/examples/slave_sender/slave_sender.pde
libraries/Wire/keywords.txt
libraries/Wire/utility/twi.c
libraries/Wire/utility/twi.h
2012-01-11 13:45:31 +01:00
c2d1de3844
Removed unused/unuseful defines from platform.txt
2012-01-09 18:51:51 +01:00
b7c54b79d7
Fine tuned libraries search. Reintroduced ./libraries folder for shipped
...
platform independent libraries.
2012-01-09 18:20:55 +01:00
57b8713cab
Moved libraries folder inside platform folder. Now libraries and examples are searched per board/platform
2012-01-04 15:14:51 +01:00
387e6b63c7
Renamed platforms.txt to platform.txt
2012-01-02 19:11:57 +01:00
812265f1c0
Removed useless defaults in platform. Remove useless boards.txt/*.platform keys. Renamed some method to a more meaningful name
2012-01-02 17:39:43 +01:00
8157ebf25a
Makeup-only: fixed some indentation and file headers
2012-01-02 16:45:01 +01:00
5ad4422fc7
Merge remote-tracking branch 'arduino/master' into platforms-b
2011-12-31 17:29:36 +01:00
a417455d5a
Platform is now implicit when referring to other packages, e.g. 'arduino:avr:arduino' becomes 'arduino:arduino'
2011-12-31 15:23:54 +01:00
770c8dfe35
Compiler class refactoring: toolchain path, build path and preferences are now class members.
2011-12-31 15:07:59 +01:00
abe41d805d
platforms.txt recipes now have symbolic variables instead of indexes ({0},{1},etc.)
...
Recipes arguments are splitted with spaces instead of |. Single argument containing spaces
should be placed between "double quotes".
Refactored and formatted Compiler class, removed all unused code in comments.
2011-12-31 14:32:48 +01:00
b5c21fcefb
Removing console logs (stdout.txt and stderr.txt) on exit. (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=701
2011-12-30 10:17:06 -05:00
1b3ae5fa63
Created second level in hardware folder: hardware/PACKAGE/PLATFORM/...
...
Made some helper class for files filtering.
platforms.txt now contains only one platform at a time.
Some cleanup in Compiler and AvrDudeUploader classes.
2011-12-30 15:46:04 +01:00
dc616601cd
Various cleanups. Introduced class PreferencesMap to replace/simplify Map<String, String>.
2011-12-28 20:00:07 +01:00
e63c2d1429
Various post-merge refinements.
2011-12-22 13:07:39 +01:00
65c15d93eb
Merge commit 'fcbbf8f4b4960bae1091c0cd9dc58b4a1885baf6' into platforms-b
...
Conflicts:
app/src/processing/app/Base.java
app/src/processing/app/debug/Compiler.java
build/build.xml
hardware/arduino/boards.txt
2011-12-22 00:35:33 +01:00
24a0dfdf00
Refactoring compile and upload to speed-up compilation, too.
2011-12-16 19:51:07 -05:00
a29866f7da
Removing delete previous applet folder on export preference.
2011-12-16 19:05:06 -05:00
1a7fe19348
Removing per-board compilation speedup checks.
2011-12-16 18:49:43 -05:00
b0ae6e764d
Compilation speed-up patch (only compile modify files). (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=638
2011-12-16 18:20:22 -05:00
7b8888a93a
Fix for full-width space bug.
...
Imported from Processing development r6687 on
http://code.google.com/p/processing
Close #1
2011-12-07 01:45:13 +09:00
541a7b3575
UI i18n and the Japanese text catalog.
...
Wrapped the every string literals with _(...) function.
The _() function resides in "app/src/processing/app/I18n.java",
which translates the UI texts using "Resources_XX.properties" file
where XX is the locale code.
I provided the properties file for the ja (Japanese) locale.
I created this file using "xgettext" and "msgcat" commands.
"i18n_update.{py,sh}" files are the tool I used to do that.
Change in "app/build.xml" is to include the properties files
in jar file.
2011-12-07 01:45:13 +09:00
fa4ab4f6ab
Adding --relax flag for linking of ATmega2560 code. (arducopter)
...
http://code.google.com/p/arduino/issues/detail?id=729
2011-12-05 17:21:05 -05:00
10aba52ab8
Making editor font size apply to serial monitor and console (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=550
2011-12-03 16:27:11 -05:00
fe243801a4
Fixing "auto-associate" preference text (.pde -> .ino).
...
http://code.google.com/p/arduino/issues/detail?id=699
2011-10-29 17:47:17 -04:00
7684a2fe85
Libraries search path now include platform specific versions
2011-10-24 11:58:52 +02:00
821481fcd7
Updated bossac to 1.2 for linux and win (MacOS version must be ported as well)
2011-10-24 11:21:50 +02:00
b14a3c501e
Lock / unlock fuses and hex file now optional for burn bootloader command.
...
This allows the "burn bootloader" command to be used, for example, to set the fuses on a microcontroller without actually loading a bootloader onto it.
http://code.google.com/p/arduino/issues/detail?id=683
http://code.google.com/p/arduino/issues/detail?id=684
2011-10-21 18:25:14 -04:00
d059beaa72
Added bossa binary for Windows
2011-10-16 23:25:44 +04:30
1e69d0284d
Temporary upload hack, until bossa get fixed.
2011-10-12 11:12:56 +02:00
cb92a1d402
Added upload with bossac
2011-10-06 01:58:38 +02:00
a2235e3cdc
Showing compilation warnings when verbose output is enabled.
...
http://code.google.com/p/arduino/issues/detail?id=664
2011-10-01 17:05:21 -04:00
d49c8e2c13
Restore .pde sketches too (not just .ino ones).
...
http://code.google.com/p/arduino/issues/detail?id=652
2011-09-25 10:01:36 -04:00
3681035869
IDE: various refactoring to make sam hardware compiling.
2011-09-23 04:47:41 +02:00
bd7e6d89d5
Compilation process for ARM (WIP)
2011-09-17 00:02:40 +02:00
43fa225724
Dialog and preference about renaming .pde to .ino files on save.
...
The new extension (.ino) is used by default for all new sketches (whether created with new or save as). It's possible, however, to control the behavior on save. The first time you save a sketch with a .pde file, you're prompted to rename it or cancel the save. There's a preference that allow selecting whether or not .pde files are renamed on save.
http://code.google.com/p/arduino/issues/detail?id=644
2011-09-16 13:30:50 -04:00
026794f1eb
Don't rename read-only files in sketch on save (which becomes save-as).
...
http://code.google.com/p/arduino/issues/detail?id=639
2011-09-16 12:45:24 -04:00
131f7898b6
Removed dialog box warning when auto-renaming from .pde to .ino.
...
Now both .pde and .ino ext are hidden in IDE tabs.
2011-09-11 23:45:12 +02:00
5d97d467c8
File renamed from .pde to .ino during save.
2011-09-10 01:16:24 +02:00
0b09a8edd9
Adding custom error messages for some 1.0 changes.
...
Also, changing the logic of the code a bit to correctly place errors even when substituting custom error messages.
2011-09-08 18:10:29 -04:00
c9d4630d2b
Fallback on system avrdude if Arduino avrdude isn't present (Linux).
2011-09-07 20:00:06 +02:00
551b8e85ac
Don't use the low-res icon on Mac OS X.
...
http://code.google.com/p/arduino/issues/detail?id=612
2011-08-31 15:29:54 -04:00
15b28b415d
Mouse change cursor shape when is moved over a URL.
2011-08-30 23:22:59 +02:00
4553cee443
Fixes to compile under Java 1.5 (on my Linux machine).
2011-08-27 00:01:08 +02:00
bd6c90e5b8
Setting Arduino icon for serial monitor window.
...
http://code.google.com/p/arduino/issues/detail?id=564
2011-08-24 11:57:58 -04:00
0020105283
Also updating serial port display from "Serial port not found" dialog.
2011-08-24 11:55:24 -04:00
91a94cbe7e
Removing "board: " prefix from line status bar.
2011-08-24 11:50:02 -04:00
365d4acf6e
Merge remote-tracking branch 'cmaglie/port-on-statusbar' into new-extension
2011-08-24 11:46:18 -04:00
d501a9ba0e
Single-click to open a URL / link (rather than double-click).
2011-08-24 11:35:12 -04:00
8ea35d4e6d
Merge remote-tracking branch 'cmaglie/schematics-view' into new-extension
2011-08-24 11:32:19 -04:00
71dd5dd534
Selected board and serial port on status bar.
2011-08-24 16:53:57 +02:00
0fca78cc7e
Fixed position of the Label of command buttons.
2011-08-24 11:36:14 +02:00
88794ec1d6
Double-click now opens URL (right-click still shows "Open URL" in popup
...
menù).
2011-08-24 10:42:58 +02:00
d00f0949ed
Renaming pins/ directory to the more generic variants/
...
http://code.google.com/p/arduino/issues/detail?id=588
2011-08-23 17:07:39 -04:00
303b2e5103
Removed arrow.
2011-08-23 19:29:36 +02:00
f233861a4c
URL right-clickable and underlined.
2011-08-23 19:21:42 +02:00
6886910f3d
Serial button on the right.
2011-08-22 18:24:13 +02:00
d60c42e5ed
Clickable url are now searched with a good regexp and highlighted.
2011-08-19 22:32:34 +02:00
a6c8753a80
Schematic URL. Actually tag is "@schematics <url>" that should be put
...
inside code comments.
2011-08-19 19:51:02 +02:00
ac3f093b76
Revert "Added Schematic view (from wiring)."
...
This reverts commit ccb318c2ab
2011-08-18 14:54:42 -04:00
fc90fa7d9d
Showing progress during compilation as well as upload.
2011-08-16 17:51:19 -04:00
ccb318c2ab
Added Schematic view (from wiring).
2011-08-16 20:38:23 +02:00
42943b4de3
Added progressbar (from wiring)
2011-08-16 19:52:31 +02:00
d9dcc66232
[sam] fixing compilation in IDE (changing some #includes).
2011-07-17 09:50:36 -04:00
a6646ca08c
fixed an issue, -Wl,--gc-sections needed to have a comma.
2011-06-29 20:21:35 -04:00
05d622f3ac
Adapting Rick's platform work to other platform changes.
2011-06-25 12:51:56 -04:00
dacfa86223
Addtional debuggin. Trying to find the pins compile issue.
2011-06-22 21:20:45 -06:00
43a11be3c9
Cleaned up some of the code. Need to focus getting the 1.0 code compilation changes double checked.
2011-06-18 23:44:32 -04:00
aa01546b55
Switched to a nonconflicting delimeter |. Compile process is working. Need to make sure that it matches 1.0 process exactly.
2011-06-17 22:12:21 -04:00
67c9dfc667
A bit of cleanup. Delimeter not figured out yet.
2011-06-17 00:54:58 -04:00
a57f35fb51
Fixed the missing line for messageformat args.
2011-06-16 23:17:08 -04:00
72c4404c6d
Fixed compile process up to step 4. asyncExec cannot have null argmuments from the array.
2011-06-16 20:36:39 -04:00
b0556c2e74
Changed :: to , for platforms.txt. Also, changes to compile process to support execAsynchronously changed to Stringp[]
2011-06-15 23:04:38 -04:00
5e0ac9c720
Converting the step by step functions to integrate with standard Arduino execAsynchronously(array)
2011-06-13 22:14:28 -04:00
7cf5b7263f
Fixed issues about invalid targets. Menu selection of boards and libraries are now functional.
2011-06-13 21:23:59 -04:00
fa268259a0
Majority of non Compiler.java changes made.
2011-06-13 14:14:22 -04:00
41600a22eb
Added initial changes to the Compiler.java file.
2011-06-06 22:34:12 -04:00
43cfc87f17
Updating version number to 0100 to allow checking for Arduino 1.0.
...
http://code.google.com/p/arduino/issues/detail?id=453
2011-03-26 16:41:30 -04:00
63d3190cbb
Not re-opening .pde sketches left open from a pre-1.0 version of Arduino.
...
That way, we can wait to rename them until the user explicitly opens them in Arduino 1.0.
2011-03-26 16:23:29 -04:00
19597b1d0b
Factoring pin definitions out of the core.
...
That is, there's now a pins/ directory in a platform, which includes multiple directories, each of which has its own pins_arduino.h. The boards.txt gets a new preferences, <BOARD>.build.pins, whose values is a sub-directory of the pins/ directory (possibly with a "platform:" prefix). That sub-directory is then placed in the include path during compilation.
2011-03-04 21:05:05 -05:00
d05e4021d0
Renamed WProgram.h to Arduino.h.
2011-03-01 19:52:13 -05:00
97abbd7a31
Removing BYTE keyword (use Serial.write() instead).
2011-02-26 13:58:03 -05:00
12d4552c66
Merge branch 'master' into new-extension
...
Conflicts:
app/src/processing/app/Editor.java
2010-12-25 18:59:59 -06:00
6fa74cf711
Serial prompt fixes.
...
Not showing the serial prompt if no serial ports are available.
Showing the serial prompt for verbose upload, too.
2010-12-23 19:28:39 -05:00
3625a1001e
Adding preferences for verbose compilation and upload.
2010-12-20 16:49:14 -05:00
f1146d80a5
Adding upload using programmer options (instead of verbose).
2010-12-20 14:50:18 -05:00
8523ab1ac7
If no upload protocol is specified for a board, use selected programmer instead.
...
Eliminates use of the upload.using preferences to specify a particular programmer. Select the programmer from the menu instead.
2010-12-17 20:33:20 -05:00
15d07fa036
Splitting up programmer selection menu and burn bootloader menu item.
2010-12-17 19:58:40 -05:00
3e31777fec
Merge branch 'master' into new-extension
2010-12-17 09:12:36 -05:00
920212ee05
Revert "added toInt() function to WString".
...
This reverts commit 448222e4b6
2010-11-29 15:14:10 -05:00
448222e4b6
added toInt() function to WString
2010-11-29 11:31:00 -05:00
37e6e7e86b
Changing version number to 0022.
2010-11-28 14:16:10 -06:00
a142a2564d
Enabling debugging for compilation of the app.
2010-11-27 11:54:07 -06:00
6750e679af
Building sketch first (so errors appear faster).
...
http://code.google.com/p/arduino/issues/detail?id=393
2010-11-27 11:39:42 -06:00
5d9602a28a
Showing dialog when serial port not found on upload.
2010-11-24 14:03:21 -05:00
06d3d85143
Handling < > & and unicode in copy to html.
...
http://code.google.com/p/arduino/issues/detail?id=29
2010-11-16 22:51:24 -05:00
dc3b815c29
Merge branch 'master' into new-extension
2010-11-10 12:15:28 -05:00
24e057a343
Setting Arduino icon.
2010-11-10 11:46:52 -05:00
299b779ca2
Updating colors, toolbar icon, and about image.
2010-11-10 10:43:46 -05:00
5e028ea09d
Saving and restoring serial monitor line ending.
2010-11-07 22:38:58 -05:00
1cac73c254
Saving and restoring location of the serial monitor.
2010-11-07 22:25:02 -05:00
1fbffaf7be
Changing Windows file association code from .pde to .ino.
...
It doesn't seem to work properly on my Windows Vista machine, but neither does the .pde association for Processing.
2010-11-06 16:38:23 -04:00
e2213d4721
Changing extension from .pde to .ino.
...
Renames all .pde files in a sketch to .ino upon opening. Prompts the user the first time this happens; if the rename is cancelled, the sketch is not opened and the user will be prompted next time a sketch with a .pde file is opened. Otherwise, renames files in all future opened sketches automatically (without prompting). Still allows for opening of .pde files and includes them in the sketchbook and examples menus.
Still need to check the file association code.
http://code.google.com/p/arduino/issues/detail?id=13
2010-11-06 15:41:01 -04:00
fa4d058297
Reapplying Christian's regex patch.
...
Revert "Revert "Removed dependencies from regex library oro.jar""
This reverts commit ed7795ef8d
2010-10-03 19:44:28 -04:00
4c26e071c8
Updating version to 0021.
2010-10-02 14:03:50 -04:00
750c860a0d
RXTXcomm.jar with only RXTXCommDriver.class updated (to add /dev/ttyACM* on Linux).
2010-10-02 18:55:16 +02:00
d09edea5e7
Recompiled rxtx to include /dev/ttyACM* on Linux.
2010-10-02 18:18:45 +02:00
ed7795ef8d
Revert "Removed dependencies from regex library oro.jar"
...
This reverts commit 2b4391052c
2010-10-02 17:19:53 +02:00
2b4391052c
Removed dependencies from regex library oro.jar
2010-10-01 19:41:36 +02:00
5c22a1e970
Updating version to 0020.
2010-09-24 16:29:07 -04:00
5e2f82b742
Updating SPI library error message and revisions.txt for final 0019 release.
2010-09-03 23:12:12 +00:00
e3856766c6
Creating a custom error message for missing SPI.h (because we changed the Ethernet library to rely on it). issue #337
2010-08-28 09:33:37 +00:00
bc8e5c3dcf
Updating / reverting to the previous / future Processing new window behavior: toolbar opens things in the existing window, menus in a new window.
2010-08-15 19:12:00 +00:00
c5e8c3e4bd
Toggling RTS as well as DTR for auto-reset.
2010-08-10 01:32:28 +00:00
78e093b482
Moving line endings selection combo-box.
2010-08-02 18:11:49 +00:00
6f96ce0df2
Adding drop-down for selecting line ending to serial monitor (issue #119 ). Also switching subpanes from BorderLayout to BoxLayout.
2010-07-11 15:31:34 +00:00
03a62f38d2
Allowing third-party hardware platforms to reference programmers defined in other platforms (issue #283 ).
2010-07-10 21:29:32 +00:00
39610d1325
Skipping all hidden files (those starting with a dot - ".") when compiling (issue #209 ).
2010-06-13 19:25:33 +00:00
9fe672fc63
Providing error messages when no board is selected.
2010-06-12 18:32:32 +00:00
0979ed050b
Updating version number to 0019.
...
Some revisions.
2010-05-29 17:01:43 +00:00
8bdde5d683
Adding automatically scoll option to serial monitor (pause / continue).
...
Changing how errors are displayed when the serial monitor can't be opened.
2010-05-29 17:00:08 +00:00
6efe13c8a1
Fixing issue with tab menu and tabs with the same base name but different extensions (issue 191).
2010-05-16 04:43:03 +00:00
775c4d272c
Only check for conflict with an existing C++ file when renaming the sketch, not when adding a new file.
2010-05-16 04:09:21 +00:00
c4760d8ae7
Moving to ant-based build system from Processing. Mac OS X seems to work (for the moment).
2010-05-08 21:47:19 +00:00
5d54fbf70b
Removing some Processing stuff that we don't need.
...
Moving the Arduino Fio up in the boards menu.
2010-05-08 20:37:54 +00:00
e5d56a1e59
Redoing the error message parsing / handling. Now using Sketch.placeException() to map back to the sketch code files and line numbers. Showing more of the actual output of avr-gcc / avr-g++.
2010-05-08 20:06:31 +00:00
34579ae440
Initial sync with Processing 6406. Compiles and runs (on Mac OS X) but probably very buggy.
2010-04-21 01:58:57 +00:00
0648283425
faq -> FAQ in Base.java (matching case of file name).
...
Adding date of 0018 release to readme.
2010-02-21 12:36:58 +00:00
a5b9d31134
Stopping you from renaming the main / first sketch file (.pde) if it contains a .cpp file with the new name.
2010-01-28 21:19:53 +00:00
2b7862a7d1
Pointing the update check at the Arduino server (instead of processing.org).
2010-01-10 20:14:59 +00:00
9a5507fd07
Saving immediately when replacing a sketch with another in the same editor. Should fix bug: http://code.google.com/p/arduino/issues/detail?id=88
2009-12-26 15:42:30 +00:00
a2ee999135
Allowing multiples files in a sketch with the same name but different extensions. Not, however, allowing a .cpp file with the same name as the sketch, because they would conflict during the build process.
2009-12-24 21:35:38 +00:00
2a3a8b1c4f
Moving sketch compilation during upload from applet/ sub-directory to a temporary folder.
2009-12-23 00:00:57 +00:00
d2a38e4b5a
Improving third-party hardware support:
...
- moving back to multple cores per platform
- using target instead of platform
- moving per-board and per-programmer preferences out of Preferences.java and into a new Target class
- adding a new "target" preference
- support for platform:value values in board preferences for bootloader path and core
- XXX: need to support platform:value syntax for board upload.using preferences.
2009-11-21 23:23:43 +00:00
8720addcba
Got bootloader burning working.
...
Wrapped some long lines.
2009-11-08 20:51:41 +00:00
e5b5f25476
Third-party cores seems to sort of work now, but burning bootloaders is probably broken.
...
Need to decide on the format for the boards.txt file.
2009-11-07 18:56:45 +00:00
3075c8e4fd
Moving libraries out of arduino platform / core directory and to top-level.
2009-11-07 17:54:56 +00:00
294abd0419
No longer mangling microcontroller names before passing them to avrdude, as it seems to support the same ones as avr-gcc now.
2009-10-23 23:28:35 +00:00
6a15e01ff8
Passing the ARDUINO constant from the IDE to avr-gcc as a command line argument (so I don't forget to update the version in the .h file).
2009-10-23 23:04:03 +00:00
2e26a2d994
Syncing with Processing 1.0.9 (revision 5766).
2009-10-22 00:56:16 +00:00
7f58e2213e
Adding support for setting baud rate to use with a programmer.
2009-10-22 00:55:07 +00:00
e814744504
Enabling the Sketchbook and Examples menu on Mac OS X with native (screen) menu bar. Processing has these disabled because they often cause problems, but they seem to be working at the moment, so I'm leaving them in.
2009-09-26 16:48:46 +00:00
048143f3d5
Adding support for .S files in libraries and cores. Patches from René Bohne.
2009-09-25 19:31:01 +00:00
f2010ebd2b
Fixing whitespace in Compiler.java.
2009-09-25 19:05:09 +00:00
3dc7fc0781
Syncing with Processing 1.0.7 (5692); needs testing.
...
Also, the Sketchbook and Examples menus are currently disabled on the Mac to work-around a bug in Apple's implementation of Java. I think this bug may have been solved, so I should try re-enabling the menus and see what happens (on 10.4 and 10.5 and 10.6). Also, I may still need to update the jre / jdk on Linux.
2009-09-24 03:16:00 +00:00
240607a4a6
Holding shift when pressing run or upload buttons give verbose output.
...
The upload.verbose and build.verbose preferences are still respected.
You don't get verbose output with Command-Shift-R or Command-Shift-U, unlike Processing in which the shift modifier switches from Run to Present. Mostly this is because I didn't think verbose output deserved its own menu items, and that's how Processing implements the other shortcut.
Holding shift while pressing upload doesn't show the compilation command lines. This matches the functionality of the upload.verbose preference, but may imply that the upload button doesn't also compile the code.
Also, in Snow Leopard, the temp directory is in some crazy folder in /var. Luckily, everything still seems to work okay.
2009-09-23 23:40:59 +00:00
3febe7ce42
Adding a serial monitor menu item and keyboard shortcut (control-shift-m / command-shift-m).
2009-09-23 22:59:55 +00:00
8f4b24492f
Updating version to 0018.
2009-09-13 17:56:43 +00:00
018ff13d8b
Moving setting of Linux look and feel from linux/Platform.java to arduino script.
2009-08-11 23:05:18 +00:00
777e7cd30d
Removing check for JDK (as opposed to JRE) in Base.java. This is because on Linux, it's tricky to automatically include tools.jar in the classpath (which is necessary for the Processing code to think that the JDK is present). (For example, Ubuntu doesn't set the JAVA_HOME variable.) As far as I know, Arduino doesn't actually need the JDK, but I could be wrong.
2009-08-03 20:53:31 +00:00
a0d608e946
Fixing default sketchbook path (Processing -> Arduino). Not setting the Windows window icon to the Processing icon (it stays as the Java icon instead).
2009-07-14 22:24:20 +00:00
59a85bfe59
(Re-)implementing syntax highlighting support for library keywords.
2009-07-12 00:40:02 +00:00
15cff82214
Removing unused preferences. Fixing upload when not deleting applet/ directory. Treating examples in the sketchbook/libraries folder as read-only.
2009-06-18 19:22:43 +00:00
bb9525ad24
Disabling the serial monitor during uploads.
2009-06-18 18:29:53 +00:00
250bce0f34
Adding keyboard shortcut (command or ctrl w) for closing the serial monitor window.
2009-06-16 20:21:39 +00:00
672ad5648e
Allowing (and fixing) uploading of unsaved sketches.
2009-06-16 19:49:28 +00:00
e88592771e
Removing attempt to flush the incoming serial data when opening the port, since it didn't seem to work.
2009-06-13 21:28:46 +00:00
4b80afbca1
Going back to one serial monitor at a time, but closing it when you pick a new serial port from the Tools > Serial Port menu (and when you upload).
2009-06-13 21:28:15 +00:00
b81a8f0309
Now supporting multiple serial monitors open at once (one for each port).
2009-06-13 21:05:15 +00:00
678e09896f
Moving serial error messages into the serial monitor (out of the editor).
2009-06-13 20:42:43 +00:00
a258042deb
Adding a basic serial monitor.
2009-06-13 20:26:21 +00:00
8823b5ba79
Ignoring lines of error messages with "In file included from" in them.
2009-06-13 12:31:54 +00:00
cdf0095e70
Modifying compilation for libraries:
...
- now compiled to their own sub-directory of the build directory
- only can see #include's in their own utility/ folders
and the core (building core.a again).
Also changed the APIs of the compilation functions somewhat (e.g. execAsynchronously no longer returns anything; it just throws a RunnerException on any error).
Still need to better handle errors in #include files; right now, the error is interpreted as being at the line where the #include happens, not within the header file.
2009-06-13 11:41:16 +00:00
cbcbc5c4d5
Removing extra nested "examples" menu.
2009-06-07 11:28:53 +00:00
8b6fb36ace
Integrating the Sizer.
2009-06-01 20:10:05 +00:00
e2952cdc77
Enabling / integrating bootloader burning. (Should be tested with a serial AVRISP and a parallel programmer)
2009-06-01 19:27:21 +00:00
5f26d058e6
Fixing help menu links, integrating copy as html, and modifying EditorToolbar labels (Run -> Verify, Export -> Upload).
2009-06-01 19:02:46 +00:00
d589209e92
Adding examples to the toolbar's open menu (in addition to the examples menu).
2009-06-01 18:21:13 +00:00
89139d1f77
More cleanup:
...
- fixing import library
- changing compilation to only look for source files in the root and utility/ folders of a library; also adding utility/ sub-folder to the include path
- removing export to application
- renaming run to verify / compile and export to upload
2009-06-01 18:11:25 +00:00
df4f1629c4
Making things more Arduino-like (cont...)
2009-06-01 17:10:56 +00:00
14778514ae
Re-configured compilation and integrated uploading. Added the Board and Serial port menus: these are currently shared across editor windows.
...
No longer using Library and LibraryManager. Instead the compiler finds the .c and .cpp files in the library paths (gotten from the Sketch via the Preprocessor and the Base's library table). This breaks libraries that have header files in sub-directories but use #include with no path names (as sub-directories of library directories are not on the include path). It will also cause problems with .c or .cpp files with the same name in different library utility folders or in a sketch or the target (core).
Now deriving the Target correctly from the selected item in the board menu.
2009-06-01 15:14:05 +00:00
ae98fbfee8
Fixing some compilations bugs:
...
- including .cpp and .c files from sketch
- adjusting error line highlighted according to the number of function prototypes generated
- taking into account preprocessor offset on the first .pde file
2009-06-01 09:28:41 +00:00
2fa8deb92d
First integration of the Arduino code in Processing 5503: PreProcessor and Compiler have been integrated with changes to the Sketch.
...
Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch).
Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over.
Removing some of the antlr stuff.
Disabling the Commander (command-line execution) for now.
Added Library, LibraryManager, and Target.
Added support for prefixed preferences (e.g. for boards and programmers).
2009-06-01 08:32:11 +00:00
22ed6cdb73
Importing Processing rev. 5503 (1.0.3).
2009-05-31 15:53:33 +00:00
Zach Eveland
David Cuartielles
David A. Mellis
Cristian Maglie
Shigeru KANEMOTO
ricklon
Tom Igoe
David A. Mellis