e9a00eb38f
close SerialMonitor when port goes away suddenly (as when user presses Leonardo reset button)
2012-04-01 14:39:52 -04:00
232c7808be
Custom error messages for use of Mouse and Keyboard on non-Leonardo boards.
2012-03-31 14:50:56 -04:00
8e176b0084
selectively suppress unwanted avrdude output for Leonardo when not verbose uploading is disabled
2012-03-30 22:24:40 -04:00
e90cb3650d
tweaked verbosity level for avrdude on Leonardo uploads
2012-03-29 22:31:01 -04:00
61c5176681
only print Leonardo upload port hunting status if verbose uploading is selected. also cleaned up other verbose message handling for Leonardo upload progress.
2012-03-29 20:01:45 -04:00
d169114205
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-03-14 15:40:29 -04:00
d3d94b157e
updated avrdudeUploader with new path for Caterina
2012-03-08 14:23:45 -05:00
d06710ebe5
Also delaying after auto-reset on Windows.
...
Windows seemed to have the same issue as Linux: scanning for the ports
prevented the reset from happening (i.e. it opened the port or
otherwise raised DTR).
2012-03-06 16:33:29 -05:00
2cff5593ec
Adding delay on Linux before looking for Leonardo bootloader.
2012-03-04 20:42:44 -05:00
eda8f1301f
Lowering non-Windows timeout for assuming Leonardo has reset.
...
On Mac and Linux, the serial port should disappear fairly quickly. So
if we see the selected port after 500 ms, it should be the bootloader
(not the sketch still).
2012-03-04 19:38:53 -05:00
4ab241ceb6
Revert "Speed up on serial port touch"
...
This reverts commit a5404125f6
2012-03-04 19:29:07 -05:00
9531c47c43
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-03-03 20:27:27 -05:00
a292677108
Adding preference for disabling verification on upload (Nathan Seidle)
...
Adds a checkbox to the preferences dialog that controls whether or not
to verify code on upload via serial (verification still always occurs
when uploading using a programmer). It is checked by default to match
current behavior.
2012-03-03 13:54:10 -05:00
8a35793794
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
...
Conflicts:
.gitignore
2012-03-03 13:28:39 -05:00
a6eb9ea5eb
Fixing double- and triple-click selection behavior (Peter Lewis)
...
Double clicking selects words, double-clicking and dragging does too.
Triple-click for lines.
http://code.google.com/p/arduino/issues/detail?id=824
2012-03-02 18:06:29 -05:00
b133faa68f
Commenting out extraneous println().
2012-03-02 17:57:10 -05:00
0db8bdbbb0
Find / Replace dialog cleanup and improvements (Peter Lewis)
...
Adds Find Previous and Use Selection for Find; various other cleanups.
Changes Mac keyboard shortcut for Redo from Command-Y to
Command-Shift-Z.
http://code.google.com/p/arduino/issues/detail?id=825
2012-03-02 17:56:17 -05:00
599a9052c9
Updating version to 101.
2012-03-02 17:47:57 -05:00
f1f2f8e49c
Lowering minimum size for Editor text area.
...
This should make it possible to shrink the overall IDE window without
losing the scroll bars on the text pane.
http://code.google.com/p/arduino/issues/detail?id=52
2012-03-11 15:05:44 -04:00
24916baf70
Don't insert newline in serial monitor keyboard shortcut (Lars J. Nielsen)
...
http://code.google.com/p/arduino/issues/detail?id=279
2012-03-11 13:50:47 -04:00
12eb56ac77
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-28 22:50:35 -05:00
784232c6a5
Adding 32-bit version of AVR toolchain on Linux (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=300
2012-02-28 14:50:28 -05:00
b861ae7767
Lowering upload timeout and per-iteration delay in Leonardo upload.
2012-02-28 12:59:52 -05:00
a5404125f6
Speed up on serial port touch
2012-02-28 18:28:34 +01:00
5d309dbb46
Added error messages for Leonardo upload
2012-02-27 16:32:24 +01:00
507921fd0f
Changes in upload procedure (WIP)
2012-02-27 14:51:19 +01:00
60f8e10bf9
Reviewed IDE upload procedure for Leonardo bootloader
2012-02-24 17:30:29 +01:00
9ec558ba8d
AvrdudeUploader auto reset improvements: auto-detect new port on Windows, big speedup on Windows and Mac/Linux
...
IDE auto-detects new port now instead of prompting user. Better handling of delay on all platforms dramatically speeds up the upload sequence.
2012-02-22 22:35:28 -05:00
65ddc6c43b
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-22 15:19:32 -05:00
6ab18ea1cc
Lowering minimum editor heights for netbooks
...
http://code.google.com/p/arduino/issues/detail?id=52
2012-02-14 16:13:39 -08:00
bab3c5eade
Leonardo auto-reset-and-upload changes for Windows (explanation below)
...
On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated.
Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13 00:56:06 -05:00
5c53796cec
added static touchPort() method to Serial class.
...
Used by Leonardo to quickly tap the comm port to initiate a reset without the potential problems of doing a full Serial object construct/dispose with all listeners, etc.
2012-02-13 00:37:21 -05:00
cb8e184ab8
Using setMinimumSize() instead of window listener for editor windows.
...
http://code.google.com/p/arduino/issues/detail?id=52
2012-02-12 19:58:40 -05:00
731ee15f0e
increased wait time for Leonardo uploading to 8 seconds
2012-02-06 15:27:44 -05:00
1e0700b536
fixed starting Leonardo bootloader from sketch
...
AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03 21:42:46 -05:00
b5c21fcefb
Removing console logs (stdout.txt and stderr.txt) on exit. (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=701
2011-12-30 10:17:06 -05:00
24a0dfdf00
Refactoring compile and upload to speed-up compilation, too.
2011-12-16 19:51:07 -05:00
a29866f7da
Removing delete previous applet folder on export preference.
2011-12-16 19:05:06 -05:00
1a7fe19348
Removing per-board compilation speedup checks.
2011-12-16 18:49:43 -05:00
b0ae6e764d
Compilation speed-up patch (only compile modify files). (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=638
2011-12-16 18:20:22 -05:00
7b8888a93a
Fix for full-width space bug.
...
Imported from Processing development r6687 on
http://code.google.com/p/processing
Close #1
2011-12-07 01:45:13 +09:00
541a7b3575
UI i18n and the Japanese text catalog.
...
Wrapped the every string literals with _(...) function.
The _() function resides in "app/src/processing/app/I18n.java",
which translates the UI texts using "Resources_XX.properties" file
where XX is the locale code.
I provided the properties file for the ja (Japanese) locale.
I created this file using "xgettext" and "msgcat" commands.
"i18n_update.{py,sh}" files are the tool I used to do that.
Change in "app/build.xml" is to include the properties files
in jar file.
2011-12-07 01:45:13 +09:00
fa4ab4f6ab
Adding --relax flag for linking of ATmega2560 code. (arducopter)
...
http://code.google.com/p/arduino/issues/detail?id=729
2011-12-05 17:21:05 -05:00
10aba52ab8
Making editor font size apply to serial monitor and console (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=550
2011-12-03 16:27:11 -05:00
fe243801a4
Fixing "auto-associate" preference text (.pde -> .ino).
...
http://code.google.com/p/arduino/issues/detail?id=699
2011-10-29 17:47:17 -04:00
b14a3c501e
Lock / unlock fuses and hex file now optional for burn bootloader command.
...
This allows the "burn bootloader" command to be used, for example, to set the fuses on a microcontroller without actually loading a bootloader onto it.
http://code.google.com/p/arduino/issues/detail?id=683
http://code.google.com/p/arduino/issues/detail?id=684
2011-10-21 18:25:14 -04:00
a2235e3cdc
Showing compilation warnings when verbose output is enabled.
...
http://code.google.com/p/arduino/issues/detail?id=664
2011-10-01 17:05:21 -04:00
d49c8e2c13
Restore .pde sketches too (not just .ino ones).
...
http://code.google.com/p/arduino/issues/detail?id=652
2011-09-25 10:01:36 -04:00
43fa225724
Dialog and preference about renaming .pde to .ino files on save.
...
The new extension (.ino) is used by default for all new sketches (whether created with new or save as). It's possible, however, to control the behavior on save. The first time you save a sketch with a .pde file, you're prompted to rename it or cancel the save. There's a preference that allow selecting whether or not .pde files are renamed on save.
http://code.google.com/p/arduino/issues/detail?id=644
2011-09-16 13:30:50 -04:00
026794f1eb
Don't rename read-only files in sketch on save (which becomes save-as).
...
http://code.google.com/p/arduino/issues/detail?id=639
2011-09-16 12:45:24 -04:00
Zach Eveland
David A. Mellis
Cristian Maglie
Shigeru KANEMOTO