20564fb1d0
Revert "changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream."
...
This reverts commit de1d5fc0cb
2011-12-20 17:08:07 -05:00
de1d5fc0cb
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:00:19 -05:00
d874bc9832
fixed attachInterrupt() on Leonardo
...
had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-19 15:40:12 -05:00
fd28193336
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
6a44faedbb
fixed digitalWrite on timer 4 pins (D6 and D13)
2011-12-18 14:18:38 -05:00
4b358f21d9
fix bootloader size in boards.txt - 2 kB instead of 4 kB
2011-12-18 12:52:30 -05:00
699315c359
fixed TIMER4 use on Leonardo
...
ATMEGA32U4 has major differences in TIMER4 registers compared to ATMEGA1280 and 2560. turnOffPWM, analogWrite, and initialize routines had wrong registers, bit names, etc.
2011-12-11 19:56:50 -05:00
eb380de972
Updated reference voltage defines for ATmega1284P.
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:18:15 -05:00
d7d0e304d5
Support 3rd external interrupt on ATmega1284P (maniacbug)
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:17:27 -05:00
0d70c7272e
Fixing delayMicroseconds() timing for 20 MHz clocks. (Erdem U. Altinyurt)
...
http://code.google.com/p/arduino/issues/detail?id=306
2011-12-02 17:04:20 -05:00
dca1dc429a
Removing Leonardo (and Mouse/Keyboard examples) for Arduino 1.0 release.
...
These will return, but the code isn't finished yet so I don't want to include it.
2011-11-28 18:47:45 -05:00
3df132aea9
Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).
2011-11-25 19:26:01 -06:00
ed48d17e20
readBytes() and readBytesUntil() handle zero bytes and return # of bytes read.
...
http://code.google.com/p/arduino/issues/detail?id=586
2011-11-19 16:23:19 -05:00
4119b9089b
Adding Arduino Mini w/ ATmega328.
...
http://code.google.com/p/arduino/issues/detail?id=710
2011-11-19 16:22:46 -05:00
75eb722759
Leonardo bootloader now sends iSerial string during enumeration. Seems to satisfy Windows' composite device requirements.
2011-11-16 16:38:22 -05:00
9b58072423
Fixed size of const array mapping digital pin number to bit mask.
2011-11-16 12:15:57 -05:00
21ee685489
Updated digital pin and port mapping constants in pins_arduino.h for Leonardo.
...
Changed digital_pin_to_port_PGM[] and digital_pin_to_bit_mask_PGM[] to reflect changes to constants for SPI and analog pins
2011-11-16 11:20:38 -05:00
5f574b3634
Swapped Dx assignment for MISO and SS to make numbering more sane (Dave Mellis). Also updated comments on pin numbers.
2011-11-16 11:00:21 -05:00
ba5d66c26f
Fixed handling of Ax constants on Leonardo
...
Fixed mistake in assignment and handling of A6-A11 constants. Renumbered constants for all Ax channels.
2011-11-16 10:49:41 -05:00
3ee847c8e2
updated pins_arduino.h for Leonardo to reflect final mapping of A6-A11
2011-11-15 09:48:09 -05:00
56d06e15ed
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-11-15 09:33:11 -05:00
6ceb9a19de
Added latest firmware for usbserial (not combined with DFU)
2011-11-12 12:57:30 +01:00
17adbbcfc5
Added latest firmware for atmega16u2 on R3 boards
2011-11-11 11:38:04 -05:00
cd6aa2b1f3
restored original non-interrupt-driven DiskLoader
...
Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-11-09 14:04:59 -05:00
f0801e61e6
updated analog pin assignments and declared TWI/I2C pins
...
Fixed analog pin to ADC channel mapping to match new scheme. Changed mapping of analog pins to digital channels so that A6-A11 point back to the correct digital pins. Declared SDA and SCL pins.
(All from Federico Vanzati's comments)
2011-11-08 22:06:15 -05:00
42fadb6f6d
added 12th ADC channel for Leonardo. cleaned up and corrected comments for pin functions.
2011-11-02 07:37:39 -04:00
c8f495ba7f
changed Leonardo PID to 0x0032 for Diskloader testing. updated .inf to match.
2011-10-31 23:44:32 -04:00
76ed870de8
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
2011-10-31 21:42:09 -04:00
4a77aea4e5
check to see if a sketch has been loaded before jumping out of bootloader
2011-10-31 21:36:29 -04:00
10001866e6
Protecting the version of parseInt() and parseFloat(). (Paul Stoffregen)
...
This should allow us more flexibility in determining how to handle these functions later. For example, in specifying that initial characters shouldn't be skipped.
http://code.google.com/p/arduino/issues/detail?id=698
2011-10-29 17:40:23 -04:00
a6381bb564
renamed bootloader file
2011-10-27 11:52:10 -04:00
a6a59f1783
Revert "Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot"
...
This reverts commit df9835efafec45af8bfa
2011-10-27 11:45:13 -04:00
f2bd8a5394
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
2011-10-27 11:41:02 -04:00
03e1515a51
changes in core and boards.txt to support new bootloader
...
old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this.
2011-10-27 11:36:10 -04:00
be51da6b0d
bootloader runs sketch after timeout, added bootloader LED breathing
2011-10-27 11:27:24 -04:00
b70f79ea2c
cosmetic changes - remove old comments, unused code
2011-10-27 10:54:21 -04:00
040a469f79
removed conditional compilation checks for CDC_ENABLED
...
bootloader must always have CDC enabled
2011-10-27 10:48:26 -04:00
9dc9e60704
removed old comments and unused USB core code
2011-10-27 10:45:13 -04:00
3d848a5b9a
brought nuevo_diskloader changes over to diskloader
...
Moved nuevo_diskloader files into diskloader directory. Changed back to real PID for Leonardo
2011-10-27 10:23:06 -04:00
df9835efaf
Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
app/src/processing/app/Editor.java
app/src/processing/app/Sketch.java
build/shared/examples/4.Communication/SerialCallResponse/SerialCallResponse.pde
build/shared/lib/theme/theme.txt
hardware/arduino/cores/arduino/HardwareSerial.h
hardware/arduino/cores/arduino/Print.cpp
hardware/arduino/cores/arduino/WString.h
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
libraries/Firmata/examples/EchoString/EchoString.ino
libraries/SD/File.cpp
libraries/SoftwareSerial/SoftwareSerial.cpp
libraries/SoftwareSerial/SoftwareSerial.h
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
libraries/SoftwareSerial/keywords.txt
2011-10-27 09:32:27 -04:00
ec45af8bfa
working bootloader. had to move interrupts back to application section. NOTE: need to have sketch CDC jump to appropriate place for bootloader - 4k from end instead of 2k
2011-10-26 16:51:42 -04:00
32614bf841
working (?!?!?!) bootloader. doesn't yet restart chip after upload completes.
2011-10-26 12:53:57 -04:00
e806be8c2a
uploading now completes using RC2 on Win7
2011-10-26 11:28:07 -04:00
9e72b06a75
closer still - now up to 4680
2011-10-25 19:04:31 -04:00
d50b95eac1
progress on bootloader bug - have implemented blocking USB_Recv. avrdude makes it to flash programming address 0400 or so before hanging
2011-10-25 18:56:10 -04:00
d9f9676d23
Bug fix in replace().
...
http://code.google.com/p/arduino/issues/detail?id=694
2011-10-25 11:15:14 -04:00
cca9401589
fixed logic bug in waiting for synch. stripped out all Serial stuff
2011-10-24 22:12:45 -04:00
55178d9b8d
removed old comments
2011-10-24 21:36:06 -04:00
f729e0321b
Moving ARDUINO_MAIN from main.cpp to wiring_digital.c and hiding PA, PB, etc.
...
http://code.google.com/p/arduino/issues/detail?id=677
http://code.google.com/p/arduino/issues/detail?id=691
2011-10-24 16:50:15 -04:00
18838fb44a
Renaming LED to LED_BUILTIN.
...
http://code.google.com/p/arduino/issues/detail?id=651
2011-10-24 16:45:44 -04:00
8336c88211
Correcting analogReference() constants for ATtiny24/44/84 and 25/45/85.
...
DEFAULT, EXTERNAL, and INTERNAL have different values on those processors.
2011-10-24 15:44:01 -04:00
3e775af6d8
bootloader responds properly now. nearly there - still have an issue with it falling out of sync after completing most operations
2011-10-23 16:49:36 -04:00
fa26e288a5
more attempts to get parameter sending to work
2011-10-21 20:30:55 -04:00
44b90b9f6a
some progress on responding to parameter requests
2011-10-21 20:06:17 -04:00
79dbae2eb7
avrdude communication starting to work - responds to sync, fails when trying to respond to STK_GET_PARAMETER
2011-10-21 19:36:53 -04:00
e12b578462
continuing to port programming code. temporarily changed PID to test on Windows (it works)
2011-10-21 18:21:04 -04:00
6ca5bf3acb
starting to port bootloader programming code - testing as I go
2011-10-21 18:03:34 -04:00
2d8ced65d1
added and modified Program() routine
2011-10-21 17:51:04 -04:00
0dc5f19ea9
cleaning up code and comments in main - getting rid of leftover stuff from experiments
2011-10-21 17:25:59 -04:00
f59451b04d
Enumerates! used inline ASM for operation which moves interrupts to boot section
2011-10-21 17:16:48 -04:00
2f46c2a6e6
can now enable interrupts but EORSTE or SOFE in USB_::attach() still cause bootloader to hang
2011-10-21 16:51:25 -04:00
bc669c14f8
added more USB source adapted from sketch core. still not enumerating.
2011-10-21 16:33:52 -04:00
ec09ead6ac
Lowering timer 1 prescale factor (to 8 from 64) for F_CPU less than 8 MHz.
...
Otherwise, you can see flicker on an LED.
2011-10-21 11:54:11 -04:00
b86ce43044
initial commit of new Diskloader-based bootloader experiment
2011-10-21 08:02:17 -04:00
e7ff928762
Putting the Uno lock bits back.
2011-10-10 12:28:09 -04:00
8efc3920f9
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
(cherry picked from commit fc8cacb9a3
2011-10-10 12:11:18 -04:00
de4d73511d
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
...
(cherry picked from commit c56a1293d7
2011-10-10 12:11:18 -04:00
b2c43c2e55
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
(cherry picked from commit 7b1ee0f1b0
2011-10-10 12:11:17 -04:00
61e4d16675
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
(cherry picked from commit 39a496616f
2011-10-10 12:11:17 -04:00
a57d315e4b
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
(cherry picked from commit e81c1123b6
2011-10-10 12:11:16 -04:00
1bbded4f34
(make sure .hex and .lst are updated as well.)
...
(cherry picked from commit ece29c3805
2011-10-10 12:11:16 -04:00
091dc9a7f9
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
(cherry picked from commit 422398e08c
2011-10-10 12:11:16 -04:00
93f7515ecf
Update version to reflect previous edit. Sigh.
...
(cherry picked from commit e28b716f88
2011-10-10 12:11:15 -04:00
07a88dc998
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
(cherry picked from commit 6f7687b0f9
2011-10-10 12:11:15 -04:00
10019bb0df
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
(cherry picked from commit 00706284de
2011-10-10 12:11:15 -04:00
287aae6b42
Update shell script makeall
...
(cherry picked from commit d4632cb095
2011-10-10 12:11:14 -04:00
92e746d0a5
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
(cherry picked from commit e2812ef91c
2011-10-10 12:11:14 -04:00
72e425a41d
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
(cherry picked from commit 6840b77643
2011-10-10 12:11:14 -04:00
11b2d86ff1
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
(cherry picked from commit 2d2ed324b4
2011-10-10 12:11:13 -04:00
f093cc6970
Merge pull request #30 from WestfW/master
...
Significant optiboot upgrade.
2011-10-10 09:01:56 -07:00
a08657b350
Moving USBasp in programmers menu.
2011-10-10 11:58:38 -04:00
2ffad50619
Merge pull request #41 from chiva/patch-1
...
Added USBasp to programmers list
2011-10-10 08:56:15 -07:00
ca671fdc05
Fixing more warnings (Paul Stoffregen).
2011-10-10 11:28:44 -04:00
fc8cacb9a3
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
2011-10-05 01:41:03 -07:00
85c109f255
Fixing warnings in Stream (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=208
2011-10-02 09:44:21 -04:00
6554ae653c
Using alternate timer 0 overflow interrupt signal name for ATtiny24/44/84.
2011-09-30 11:24:44 -04:00
bd823bf201
Changing Ethernet upload protocol from stk500 to arduino.
...
http://code.google.com/p/arduino/issues/detail?id=649
2011-09-28 23:26:37 -04:00
de22990133
Updating bootloader comments.
2011-09-16 20:31:41 -04:00
df2270d4d5
Commenting out micro board for now since it's not being released yet.
2011-09-16 20:26:43 -04:00
19d7d4b066
Updating Micro bootloader (previous one was identical to Leonardo).
2011-09-16 18:25:59 -04:00
d532d85059
added Mouse.isPressed() method
2011-09-16 16:59:14 -04:00
00c3631467
made some Keyboard methods private
2011-09-16 16:43:07 -04:00
30fc9919e1
added support for TIMER4D used for PWM on Leonardo and Micro D6
2011-09-16 16:36:42 -04:00
b898a35f76
new bootloader binaries for Micro and Leonardo - uses new assignment for TXLED pin
2011-09-16 16:24:21 -04:00
a4ccf47ec7
updated pin assignment again based on design files for Leonardo
2011-09-16 16:12:39 -04:00
23d0d05844
updated pin mappings for bootloader and pins_arduino.h in anticipation of final hardware.
2011-09-16 15:46:51 -04:00
8638d5b4e9
restored accidentally-deleted Leonardo type in boards.txt
2011-09-16 14:54:42 -04:00
75cfefcd0a
restored Micro entry in boards.txt, made separate bootloader images for Leonardo and Micro.
2011-09-16 14:47:42 -04:00
cd5ecfff1c
Merge https://github.com/arduino/32U4 into new-extension
2011-09-16 14:34:55 -04:00
667da698d7
added automatic one-shot TX and RX LED control for sketch USB
2011-09-16 14:32:25 -04:00
Zach Eveland
David A. Mellis
Cristian Maglie
WestfW