diff --git a/boards.txt b/boards.txt index cb603cd..710ae27 100644 --- a/boards.txt +++ b/boards.txt @@ -154,7 +154,7 @@ leonardo.upload.disable_flushing=true leonardo.bootloader.low_fuses=0xff leonardo.bootloader.high_fuses=0xd8 leonardo.bootloader.extended_fuses=0xcb -leonardo.bootloader.path=caterina_LUFA +leonardo.bootloader.path=caterina leonardo.bootloader.file=Caterina.hex leonardo.bootloader.unlock_bits=0x3F leonardo.bootloader.lock_bits=0x2F diff --git a/bootloaders/caterina/Caterina-Leonardo.hex b/bootloaders/caterina/Caterina-Leonardo.hex deleted file mode 100644 index ea2af98..0000000 --- a/bootloaders/caterina/Caterina-Leonardo.hex +++ /dev/null @@ -1,120 +0,0 @@ -:1078000011241FBECFEFDAE0DEBFCDBF0BC14101B7 -:1078100042144505560455026403740300001E9586 -:1078200087020110030000C18081C106C0FF0A0069 -:107830000CA10185037508150026FF00954009017C -:107840008102954009029102C0040309041A033021 -:1078500000300030003000300030003000300031A7 -:1078600000370030003100380341007200640075B9 -:107870000069006E006F0020004C0065006F006E14 -:10788000006100720064006F00200062006F006FF2 -:107890000074006C006F00610064006500720018E5 -:1078A00003410072006400750069006E006F0020E3 -:1078B000004C004C00430012010002020000404155 -:1078C0002334000001000203011201000200000045 -:1078D0004041233400000100020301090264000357 -:1078E00001008032080B00020202010009040000BE -:1078F0000102020000052400100105240101010419 -:107900002402020524060001070581031000400936 -:10791000040100020A0000000705020240000007FF -:107920000583024000000904020001030000000971 -:107930002101010001221E000705840340004000D0 -:1079400020918A0130918B012C5F3F4F30938B0146 -:1079500020938A01C901892F99278695982F803411 -:1079600018F08FE7891B982F990F921710F44798FA -:107970000895479A08955D9A289A81E08093E000DF -:107980001092E200EE27FF270994089528E088E18D -:1079900090E00FB6F894A895809360000FBE2093F6 -:1079A0006000FFCF0F931F93CF93DF93982FEB01CE -:1079B000042F10E088E76030780730F411E083E0AE -:1079C000FB0180935700E895892F68E071E0402F14 -:1079D00006D1112311F107B600FCFDCF402F4695CB -:1079E000FE01A8E0B1E020E031E009C08D919D9159 -:1079F0000C0130935700E895112432962F5F24171D -:107A0000A8F385E0FE0180935700E89507B600FCD7 -:107A1000FDCF81E180935700E895DF91CF911F91D1 -:107A20000F91089584B794B7977F94BF98E10FB6EC -:107A3000F89490936000109260000FBE5D9A289AAF -:107A4000479883FF08C0E0E0F0E0859194918F5F54 -:107A50009F4F09F090DF3F9A209A559A90E89093B3 -:107A600061001092610081E885BF95BF9FD084E1DD -:107A70008093880180E180938901E0E0F0E08591C6 -:107A800094918F5F9F4F19F081E080938F01EE24D6 -:107A9000FF24BB24B39454EFC52E51E0D52E1FD242 -:107AA000082F8EE098E7FC012491319602964491CC -:107AB000201711F02223B9F7109291011092900132 -:107AC00082E068E071E08BD0013479F460910801C4 -:107AD0006058633028F0683111F064E001C063E061 -:107AE000C62FD0E0CF5DD7480EC0063571F4809127 -:107AF0000801803311F011E022C080910A01C82FE3 -:107B0000D0E0C25ED74811E022C0053721F413E06F -:107B1000CEE1D8E71CC0053539F4E0900801F090BB -:107B20000901EE0CFF1C0AC0043631F482E0B701F3 -:107B30004091090137DF02C0043721F010E0C5E2AF -:107B4000D8E705C010910901E701E10EF11CC7D18A -:107B50008097B1F483E068E871E041E050E059D0EB -:107B6000112329F0412F50E083E8BE0152D083E475 -:107B700069E871E041E050E04CD0013509F08FCF69 -:107B8000D0929101C0929001B0928F01EE24FF2417 -:107B900086CFFC01289884E680938D0104C08091F3 -:107BA000F100819361506623D1F7089510929101FD -:107BB0001092900110928E0110928F0181E08093BB -:107BC000D70080EA8093D80082E189BD09B400FE25 -:107BD000FDCF80E98093D8001092E0000895FB016A -:107BE0008093E90024E69BE611C08091E80085FFC0 -:107BF000FCCF289820938D018091F1008193809192 -:107C0000E80085FD02C09093E8004150442369F7E5 -:107C10000895982FFB01282F207287708093E90028 -:107C200064E63AE317C08091E80085FFFCCF97FF38 -:107C300002C0849101C080813196211180E05D985D -:107C400060938C018093F1008091E80085FD02C073 -:107C50003093E800415050408FEF4F3F580719F7DD -:107C600096FF03C08AE38093E80008958091930112 -:107C7000813299F45D9884E680938C0120E030E0B5 -:107C800003C080818093F100F901E050FF4F2F5F26 -:107C90003F4F28303105A9F714C0803261F480913C -:107CA000E80082FFFCCF80E091E067E072DF8BEFBD -:107CB0008093E80006C0823221F480919401809381 -:107CC000070181E0089520919501223291F1213040 -:107CD00081F48091980190919901089711F4209373 -:107CE0009A0180919A01882309F059C029EC38E75C -:107CF00058C0223029F484E690E02BED38E71DC00F -:107D0000233009F04AC080919401882319F429E4B2 -:107D100038E747C0823019F427E638E742C083309D -:107D200019F42DE438E73DC08130B9F52FE938E783 -:107D300038C082E090E02BE238E740919801509102 -:107D40009901BC014817590708F4BA0190918C01B8 -:107D500040E050E0AEEF8091E8008570E1F3809163 -:107D6000E80082FD16C0F901E40FF51F4F5F5F4F79 -:107D7000E4915D98E093F100842F8F7311F4A09348 -:107D8000E80094E64617570730F390938C0181E0A2 -:107D9000089590938C0180E0089580E0089527EB8A -:107DA00038E7F901849190E0C8CF1092E900809102 -:107DB000E80083FF61C082E991E068E0EADE82EFDB -:107DC0008093E8008091920187FF05C08091E800D0 -:107DD00080FFFCCF03C08EEF8093E8008091930179 -:107DE000853051F48091E80080FFFCCF80919401B0 -:107DF00080688093E30039C08930E1F48091940178 -:107E000080938E01E7E2F8E791E031E026E390937A -:107E1000E9003093EB0084918093EC002093ED0017 -:107E20009F5F3196953099F78EE78093EA00109224 -:107E3000EA001BC0883049F490918E015D9884E679 -:107E400080938C019093F10010C0882339F45D98E1 -:107E500084E680938C011092F10007C0863011F403 -:107E600032DF01C003DF882321F08EEF8093E8002A -:107E7000089581E28093EB0008958091E1001092D3 -:107E8000E100282F83FF0CC01092E90081E080936D -:107E9000EB001092EC0082E38093ED0010928E01D3 -:107EA00022FF1CC080918C01882331F08150809387 -:107EB0008C01882309F45D9A80918D01882331F02B -:107EC000815080938D01882309F4289A80918F0135 -:107ED000882321F4109291011092900108951F932C -:107EE000CF93DF9312E0C0E9D1E05FDFC6DF1093EC -:107EF000E9008091E80085FF13C0289884E680930C -:107F00008D019091F1008091E80085FD03C08BE622 -:107F10008093E800892F90E0DF91CF911F91089521 -:107F2000809190019091910101979093910180939C -:107F300090018091900190919101892B09F426DDA7 -:0A7F4000CE010197F1F7FCDCD0CF71 -:087F4A0000E10000000000004E -:040000030000780081 -:00000001FF diff --git a/bootloaders/caterina_LUFA/Caterina.c b/bootloaders/caterina/Caterina.c similarity index 100% rename from bootloaders/caterina_LUFA/Caterina.c rename to bootloaders/caterina/Caterina.c diff --git a/bootloaders/caterina_LUFA/Caterina.h b/bootloaders/caterina/Caterina.h similarity index 100% rename from bootloaders/caterina_LUFA/Caterina.h rename to bootloaders/caterina/Caterina.h diff --git a/bootloaders/caterina_LUFA/Caterina.hex b/bootloaders/caterina/Caterina.hex similarity index 100% rename from bootloaders/caterina_LUFA/Caterina.hex rename to bootloaders/caterina/Caterina.hex diff --git a/bootloaders/caterina_LUFA/Descriptors.c b/bootloaders/caterina/Descriptors.c similarity index 100% rename from bootloaders/caterina_LUFA/Descriptors.c rename to bootloaders/caterina/Descriptors.c diff --git a/bootloaders/caterina_LUFA/Descriptors.h b/bootloaders/caterina/Descriptors.h similarity index 100% rename from bootloaders/caterina_LUFA/Descriptors.h rename to bootloaders/caterina/Descriptors.h diff --git a/bootloaders/caterina/Makefile b/bootloaders/caterina/Makefile old mode 100644 new mode 100755 index 8075a56..5439b5b --- a/bootloaders/caterina/Makefile +++ b/bootloaders/caterina/Makefile @@ -1,105 +1,717 @@ -############################################################################### -# Makefile for Caterina (formerly DiskLoader) -############################################################################### - -## General Flags -PROJECT = Caterina -TARGET = Caterina.elf -CC = avr-gcc - -# BOARD2 -MCU = atmega32u4 -AVR_FREQ = 16000000L - -# Specify the Arduino model using the assigned PID. This is used by Descriptors.c -# to set PID and product descriptor string - -# Arduino Leonardo bootloader PID -ARDUINO_MODEL_PID = 0x0034 -# Arduino Micro bootloader PID -#ARDUINO_MODEL_PID = 0x0035 - -# Change if your programmer is different -AVRDUDE_PROGRAMMER = avrispmkII -AVRDUDE_PORT = usb - -# program name should not be changed... -PROGRAM = Caterina - -AVRDUDE = avrdude -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU) - -## Options common to compile, link and assembly rules -COMMON = -mmcu=$(MCU) - -override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types - -## Assembly specific flags -ASMFLAGS = $(COMMON) -ASMFLAGS += $(CFLAGS) -ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2 - -## Linker flags -LDFLAGS = $(COMMON) -LDFLAGS += -Wl,-gc-sections,-Map=Caterina.map,--section-start=.text=0x7800,--relax -LDFLAGS += -nodefaultlibs -nostartfiles - -## Intel Hex file production flags -HEX_EEPROM_FLAGS = -j .eeprom -HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load" -HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings - -## Objects explicitly added by the user -LINKONLYOBJECTS = - -MODULES := . -SRC_DIR := $(addprefix src/,$(MODULES)) -BUILD_DIR := $(addprefix build/,$(MODULES)) - -SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp)) -OBJ := $(patsubst src/%.cpp,build/%.o,$(SRC)) -DEP := $(OBJ:%.o=%.d) -INCLUDES := $(addprefix -I,$(SRC_DIR)) - -vpath %.cpp $(SRC_DIR) - -.PHONY: all checkdirs clean - -all: checkdirs $(TARGET) Caterina.hex Caterina.lss size - --include $(DEP) - -checkdirs: $(BUILD_DIR) - -$(BUILD_DIR): - @mkdir -p $@ - -clean: - @rm -rf build/ - @rm -f *.hex - @rm -f *.elf - @rm -f *.lss - @rm -f *.map - -define make-goal -$1/%.o: %.cpp - $(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@ -endef - -$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir)))) - -$(TARGET): $(OBJ) - $(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@ - -%.hex: $(TARGET) - avr-objcopy -O ihex $(HEX_FLASH_FLAGS) $< $@ - -%.lss: $(TARGET) - avr-objdump -h -S $< > $@ - -size: $(TARGET) - @echo -# @avr-size -C --mcu=${MCU} ${TARGET}.elf - -program: $(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -B 1 -u -U flash:w:$(TARGET).hex \ No newline at end of file +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = atmega32u4 + + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = USER + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Starting byte address of the bootloader, as a byte address - computed via the formula +# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024) +# +# Note that the bootloader size and start address given in AVRStudio is in words and not +# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. +FLASH_SIZE_KB = 32 +BOOT_SECTION_SIZE_KB = 4 +BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc) + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Caterina + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../../../../../LUFA-111009 + + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 +LUFA_OPTS += -D ORDERED_EP_CONFIG +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_RAM_DESCRIPTORS +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS += -D NO_INTERNAL_SERIAL +LUFA_OPTS += -D NO_DEVICE_SELF_POWER +LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP +LUFA_OPTS += -D NO_SOF_EVENTS + +#LUFA_OPTS += -D NO_BLOCK_SUPPORT +#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT +#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT +#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + Descriptors.c \ + $(LUFA_SRC_USB) \ + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=c99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) +CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +ADEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +CPPDEFS += $(LUFA_OPTS) +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = avrispmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = /Applications/avrdude -C /Applications/avrdude.conf -B 1 +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation \($(TARGET)\)... + @doxygen Doxygen.conf + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program debug gdb-config checksource + diff --git a/bootloaders/caterina/src/Caterina.cpp b/bootloaders/caterina/src/Caterina.cpp deleted file mode 100644 index 7ef6fa8..0000000 --- a/bootloaders/caterina/src/Caterina.cpp +++ /dev/null @@ -1,251 +0,0 @@ - - -#include "Platform.h" - -// This bootloader creates a composite Serial device -// -// The serial interface supports a STK500v1 protocol that is very similar to optiboot -// -// The bootloader will timeout and start the firmware after a few hundred milliseconds -// if a usb connection is not detected. -// -// The tweakier code is to keep the bootloader below 2k (no interrupt table, for example) - -extern "C" -void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors"))); -void entrypoint(void) -{ - asm volatile ( - "eor r1, r1\n" // Zero register - "out 0x3F, r1\n" // SREG - "ldi r28, 0xFF\n" - "ldi r29, 0x0A\n" - "out 0x3E, r29\n" // SPH - "out 0x3D, r28\n" // SPL - "rjmp main" // Stack is all set up, start the main code - ::); -} - -uint8_t _flashbuf[128]; -uint8_t _inSync; -uint8_t _ok; -extern volatile uint8_t _ejected; -extern volatile uint16_t _timeout; - -void Program(uint8_t ep, uint16_t page, uint8_t count) -{ - uint8_t write = page < 30*1024; // Don't write over firmware please - if (write) - boot_page_erase(page); - - Recv(ep,_flashbuf,count); // Read while page is erasing - - if (!write) - return; - - boot_spm_busy_wait(); // Wait until the memory is erased. - - count >>= 1; - uint16_t* p = (uint16_t*)page; - uint16_t* b = (uint16_t*)_flashbuf; - for (uint8_t i = 0; i < count; i++) - boot_page_fill(p++, b[i]); - - boot_page_write(page); - boot_spm_busy_wait(); - boot_rww_enable (); -} - -void StartSketch(); -int USBGetChar(); -#define getch USBGetChar - -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x10 - -#define STK_OK 0x10 -#define STK_INSYNC 0x14 // ' ' -#define CRC_EOP 0x20 // 'SPACE' -#define STK_GET_SYNC 0x30 // '0' - -#define STK_GET_PARAMETER 0x41 // 'A' -#define STK_SET_DEVICE 0x42 // 'B' -#define STK_SET_DEVICE_EXT 0x45 // 'E' -#define STK_LOAD_ADDRESS 0x55 // 'U' -#define STK_UNIVERSAL 0x56 // 'V' -#define STK_PROG_PAGE 0x64 // 'd' -#define STK_READ_PAGE 0x74 // 't' -#define STK_READ_SIGN 0x75 // 'u' - -extern const uint8_t _readSize[] PROGMEM; -const uint8_t _readSize[] = -{ - STK_GET_PARAMETER, 1, - STK_SET_DEVICE, 20, - STK_SET_DEVICE_EXT, 5, - STK_UNIVERSAL, 4, - STK_LOAD_ADDRESS, 2, - STK_PROG_PAGE, 3, - STK_READ_PAGE, 3, - 0,0 -}; - -extern const uint8_t _consts[] PROGMEM; -const uint8_t _consts[] = -{ - SIGNATURE_0, - SIGNATURE_1, - SIGNATURE_2, - HW_VER, // Hardware version - SW_MAJOR, // Software major version - SW_MINOR, // Software minor version - 0x03, // Unknown but seems to be required by avr studio 3.56 - 0x00, // -}; - - -void USBInit(void); -int main(void) __attribute__ ((naked)); - -// STK500v1 main loop, very similar to optiboot in protocol and implementation -int main() -{ - uint8_t MCUSR_state = MCUSR; // store the reason for the reset - MCUSR &= ~(1 << WDRF); // must clear the watchdog reset flag before disabling and reenabling WDT - wdt_disable(); - TX_LED_OFF(); - RX_LED_OFF(); - L_LED_OFF(); - if (MCUSR_state & (1< 2) - i = (i == 0x18) ? 3 : 4; // 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0 - pgm = _consts + i + 3; - send = 1; - } - - else if (STK_UNIVERSAL == cmd) - { - if (packet[0] == 0x30) - pgm = _consts + packet[2]; // read signature - send = 1; - } - - // Read signature bytes - else if (STK_READ_SIGN == cmd) - { - pgm = _consts; - send = 3; - } - - else if (STK_LOAD_ADDRESS == cmd) - { - address = *((uint16_t*)packet); // word addresses - address += address; - } - - else if (STK_PROG_PAGE == cmd) - { - Program(CDC_RX,address,packet[1]); - } - - else if (STK_READ_PAGE == cmd) - { - send = packet[1]; - pgm = (const uint8_t*)address; - address += send; // not sure of this is required - } - - // Check sync - if (getch() != ' ') - break; - Transfer(CDC_TX,&_inSync,1); - - // Send result - if (send) - Transfer(CDC_TX|TRANSFER_PGM,pgm,send); // All from pgm memory - - // Send ok - Transfer(CDC_TX|TRANSFER_RELEASE,&_ok,1); - - if (cmd == 'Q') - break; - } - _timeout = 500; // wait a moment before exiting the bootloader - may need to finish responding to 'Q' for example - _ejected = 1; - } -} - -// Nice breathing LED indicates we are in the firmware -uint16_t _pulse; -void LEDPulse() -{ - _pulse += 4; - uint8_t p = _pulse >> 9; - if (p > 63) - p = 127-p; - p += p; - if (((uint8_t)_pulse) > p) - L_LED_OFF(); - else - L_LED_ON(); -} - -void StartSketch() -{ - TX_LED_OFF(); // switch off the RX and TX LEDs before starting the user sketch - RX_LED_OFF(); - UDCON = 1; // Detach USB - UDIEN = 0; - asm volatile ( // Reset vector to run firmware - "clr r30\n" - "clr r31\n" - "ijmp\n" - ::); -} - -void Reset() -{ - wdt_enable(WDTO_15MS); // reset the microcontroller to reinitialize all IO and other registers - for (;;) - ; -} diff --git a/bootloaders/caterina/src/Platform.h b/bootloaders/caterina/src/Platform.h deleted file mode 100644 index 26c1114..0000000 --- a/bootloaders/caterina/src/Platform.h +++ /dev/null @@ -1,49 +0,0 @@ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD); - -#define USB_PID_LEONARDO_BOOTLOADER 0x0034 -#define USB_PID_MICRO_BOOTLOADER 0x0035 -#define USB_VID 0x2341 // arduino LLC vid -#define USB_PID ARDUINO_MODEL_PID // passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro - -#define USB_SERIAL_STRING '0','0','0','0','0','0','0','0','1','7','0','1' - -#define OEM_NAME 'l','e','o','n','a','r','d','o' // 8 chars -#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); -#define L_LED_OFF() PORTC &= ~(1<<7) -#define L_LED_ON() PORTC |= (1<<7) -#define TX_LED_OFF() PORTD |= (1<<5) -#define TX_LED_ON() PORTD &= ~(1<<5) -#define RX_LED_OFF() PORTB |= (1<<0) -#define RX_LED_ON() PORTB &= ~(1<<0) - -#define TRANSFER_PGM 0x80 -#define TRANSFER_RELEASE 0x40 -#define TRANSFER_ZERO 0x20 - -void Transfer(uint8_t ep, const uint8_t* data, int len); -void Recv(uint8_t ep, uint8_t* dst, uint8_t len); -void Program(uint8_t ep, uint16_t page, uint8_t count); - -/* HID is not fully-supported in the bootloader - can be enabled - for testing, but note the descriptor report and other parts are - not complete */ -#define HID_ENABLED - -#include "USBCore.h" -#include "USBDesc.h" - - diff --git a/bootloaders/caterina/src/USBCore.cpp b/bootloaders/caterina/src/USBCore.cpp deleted file mode 100644 index 0eecacc..0000000 --- a/bootloaders/caterina/src/USBCore.cpp +++ /dev/null @@ -1,512 +0,0 @@ - - -/* Copyright (c) 2010, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT - -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -#define TX_RX_LED_PULSE_MS 100 -uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ -uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - -void Reset(); - -//================================================================== -//================================================================== - -typedef struct -{ - uint32_t dwDTERate; - uint8_t bCharFormat; - uint8_t bParityType; - uint8_t bDataBits; - uint8_t lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; - -//================================================================== -//================================================================== - -// 4 bytes of RAM -volatile uint8_t _usbConfiguration; -volatile uint8_t _ejected; -volatile uint16_t _timeout; - -static inline void WaitIN(void) -{ - while (!(UEINTX & (1<> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -const uint8_t _rawHID[] = -{ - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), - - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 - - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) - - 0x95, 64, // report count RX - 0x09, 0x02, // usage - 0x91, 0x02, // Output (array) - 0xC0 // end collection -}; - -uint8_t _cdcComposite = 0; - -bool SendDescriptor() -{ - Setup& setup = _setup; - uint16_t desc_length = 0; - const uint8_t* desc_addr = 0; - - uint8_t t = setup.wValueH; - if (0x22 == t) - { -#ifdef HID_ENABLED - desc_addr = _rawHID; - desc_length = sizeof(desc_length); -#endif - } else if (USB_DEVICE_DESCRIPTOR_TYPE == t) - { - if (setup.wLength == 8) - _cdcComposite = 1; - desc_addr = _cdcComposite ? (const uint8_t*)&USB_DeviceDescriptorA : (const uint8_t*)&USB_DeviceDescriptor; - } - else if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) - { - desc_addr = (const uint8_t*)&USB_ConfigDescriptor; - desc_length = sizeof(USB_ConfigDescriptor); - } - else if (USB_STRING_DESCRIPTOR_TYPE == t) - { - if (setup.wValueL == 0) - desc_addr = (const uint8_t*)&STRING_LANGUAGE; - else if (setup.wValueL == IPRODUCT) - desc_addr = (const uint8_t*)&STRING_IPRODUCT; - else if (setup.wValueL == ISERIAL) - desc_addr = (const uint8_t*)&STRING_SERIAL; - else if (setup.wValueL == IMANUFACTURER) - desc_addr = (const uint8_t*)&STRING_IMANUFACTURER; - else - return false; - } else - return false; - - if (desc_length == 0) - desc_length = pgm_read_byte(desc_addr); - if (setup.wLength < desc_length) - desc_length = setup.wLength; - - // Send descriptor - // EP0 is 64 bytes long - // RWAL and FIFOCON don't work on EP0 - uint16_t n = 0; - do - { - if (!WaitForINOrOUT()) - return false; - Send8(pgm_read_byte(&desc_addr[n++])); - uint8_t clr = n & 0x3F; - if (!clr) - ClearIN(); // Fifo is full, release this packet - } while (n < desc_length); - return true; -} - -void USBSetupInterrupt() -{ - SetEP(0); - if (!ReceivedSetupInt()) - return; - - Setup& setup = _setup; // global saves ~30 bytes - Recv((uint8_t*)&setup,8); - ClearSetupInt(); - - if (setup.bmRequestType & DEVICETOHOST) - WaitIN(); - else - ClearIN(); - - bool ok = true; - uint8_t r = setup.bRequest; - if (SET_ADDRESS == r) - { - WaitIN(); - UDADDR = setup.wValueL | (1<> 8) & 0xFF) - -#define CDC_V1_10 0x0110 -#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 - -#define CDC_CALL_MANAGEMENT 0x01 -#define CDC_ABSTRACT_CONTROL_MODEL 0x02 -#define CDC_HEADER 0x00 -#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 -#define CDC_UNION 0x06 -#define CDC_CS_INTERFACE 0x24 -#define CDC_CS_ENDPOINT 0x25 -#define CDC_DATA_INTERFACE_CLASS 0x0A - - -// Device -typedef struct { - uint8_t len; // 18 - uint8_t dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE - uint16_t usbVersion; // 0x200 - uint8_t deviceClass; - uint8_t deviceSubClass; - uint8_t deviceProtocol; - uint8_t packetSize0; // Packet 0 - uint16_t idVendor; - uint16_t idProduct; - uint16_t deviceVersion; // 0x100 - uint8_t iManufacturer; - uint8_t iProduct; - uint8_t iSerialNumber; - uint8_t bNumConfigurations; -} DeviceDescriptor; - -// Config -typedef struct { - uint8_t len; // 9 - uint8_t dtype; // 2 - uint16_t clen; // total length - uint8_t numInterfaces; - uint8_t config; - uint8_t iconfig; - uint8_t attributes; - uint8_t maxPower; -} ConfigDescriptor; - -// String - -// Interface -typedef struct -{ - uint8_t len; // 9 - uint8_t dtype; // 4 - uint8_t number; - uint8_t alternate; - uint8_t numEndpoints; - uint8_t interfaceClass; - uint8_t interfaceSubClass; - uint8_t protocol; - uint8_t iInterface; -} InterfaceDescriptor; - -// Endpoint -typedef struct -{ - uint8_t len; // 7 - uint8_t dtype; // 5 - uint8_t addr; - uint8_t attr; - uint16_t packetSize; - uint8_t interval; -} EndpointDescriptor; - -// Interface Association Descriptor -// Used to bind 2 interfaces together in CDC compostite device -typedef struct -{ - uint8_t len; // 8 - uint8_t dtype; // 11 - uint8_t firstInterface; - uint8_t interfaceCount; - uint8_t functionClass; - uint8_t funtionSubClass; - uint8_t functionProtocol; - uint8_t iInterface; -} IADDescriptor; - -// CDC CS interface descriptor -typedef struct -{ - uint8_t len; // 5 - uint8_t dtype; // 0x24 - uint8_t subtype; - uint8_t d0; - uint8_t d1; -} CDCCSInterfaceDescriptor; - -typedef struct -{ - uint8_t len; // 4 - uint8_t dtype; // 0x24 - uint8_t subtype; - uint8_t d0; -} CDCCSInterfaceDescriptor4; - -typedef struct -{ - IADDescriptor iad; // Only needed on compound device - - // Control - InterfaceDescriptor cif; // - CDCCSInterfaceDescriptor header; - CDCCSInterfaceDescriptor callManagement; - CDCCSInterfaceDescriptor4 controlManagement; - CDCCSInterfaceDescriptor functionalDescriptor; - EndpointDescriptor cifin; - - // Data - InterfaceDescriptor dif; - EndpointDescriptor in; - EndpointDescriptor out; -} CDCDescriptor; - -typedef struct -{ - uint8_t len; // 9 - uint8_t dtype; // 0x21 - uint8_t addr; - uint8_t versionL; // 0x101 - uint8_t versionH; // 0x101 - uint8_t country; - uint8_t desctype; // 0x22 report - uint8_t descLenL; - uint8_t descLenH; -} HIDDescDescriptor; - -typedef struct -{ - InterfaceDescriptor hid; - HIDDescDescriptor desc; - EndpointDescriptor in; -} HIDDescriptor; - -#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ - { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } - -#define D_CONFIG(_totalLength,_interfaces) \ - { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(100) } - -#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ - { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } - -#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \ - { 7, 5, _addr,_attr,_packetSize, _interval } - -#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ - { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } - -#define D_HIDREPORT(_descriptorLength) \ - { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } - -#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } -#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } - -#endif \ No newline at end of file diff --git a/bootloaders/caterina/src/USBDesc.cpp b/bootloaders/caterina/src/USBDesc.cpp deleted file mode 100644 index a84f3be..0000000 --- a/bootloaders/caterina/src/USBDesc.cpp +++ /dev/null @@ -1,83 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -//==================================================================================================== -//==================================================================================================== -// Actual device descriptors - -const uint16_t STRING_LANGUAGE[2] = { - (3<<8) | (2+2), - 0x0409 // English -}; - -const uint16_t STRING_SERIAL[13] = { - (3<<8) | (2+2*12), - USB_SERIAL_STRING -}; - -const uint16_t STRING_IPRODUCT[28] = { - (3<<8) | (2+2*27), -#if USB_PID == USB_PID_LEONARDO_BOOTLOADER - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o',' ','b','o','o','t','l','o','a','d','e','r' -#elif USB_PID == USB_PID_MICRO_BOOTLOADER - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ','b','o','o','t','l','o','a','d','e','r',' ',' ',' ' -#endif -}; - -const uint16_t STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), - 'A','r','d','u','i','n','o',' ','L','L','C' -}; - -DeviceDescriptor USB_DeviceDescriptorA = D_DEVICE(0X02,0X00,0X00,64,USB_VID,USB_PID,0x100,0,IPRODUCT,ISERIAL,1); -DeviceDescriptor USB_DeviceDescriptor = D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,0,IPRODUCT,ISERIAL,1); - -Config USB_ConfigDescriptor = -{ - D_CONFIG(sizeof(Config),INTERFACE_COUNT), - - // CDC - { - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,2), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) - }, - -#ifdef HID_ENABLED - // HID - { - D_INTERFACE(HID_INTERFACE,1,3,0,0), - D_HIDREPORT(30), - D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x40) - } -#endif -}; - diff --git a/bootloaders/caterina/src/USBDesc.h b/bootloaders/caterina/src/USBDesc.h deleted file mode 100644 index fa962e9..0000000 --- a/bootloaders/caterina/src/USBDesc.h +++ /dev/null @@ -1,60 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#ifndef HID_ENABLED // HID is NOT enabled - #define CDC_ACM_INTERFACE 0 // CDC ACM - #define CDC_DATA_INTERFACE 1 // CDC Data - #define CDC_ENDPOINT_ACM 1 - #define CDC_ENDPOINT_OUT 2 - #define CDC_ENDPOINT_IN 3 - #define INTERFACE_COUNT 2 // 2 for CDC -#else // HID is enabled - #define CDC_ACM_INTERFACE 0 // CDC ACM - #define CDC_DATA_INTERFACE 1 // CDC Data - #define CDC_ENDPOINT_ACM 1 - #define CDC_ENDPOINT_OUT 2 - #define CDC_ENDPOINT_IN 3 - #define HID_INTERFACE 2 // HID Interface - #define HID_ENDPOINT_INT 4 - #define INTERFACE_COUNT 3 // 2 for CDC + 1 for hid -#endif - -typedef struct -{ - ConfigDescriptor config; - CDCDescriptor cdc; -#ifdef HID_ENABLED - HIDDescriptor hid; -#endif -} Config; - -extern Config USB_ConfigDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptorA PROGMEM; - -extern const uint16_t STRING_LANGUAGE[2] PROGMEM; -extern const uint16_t STRING_IPRODUCT[28] PROGMEM; -extern const uint16_t STRING_IMANUFACTURER[12] PROGMEM; -extern const uint16_t STRING_SERIAL[13] PROGMEM; - -#define IMANUFACTURER 1 -#define IPRODUCT 2 -#define ISERIAL 3 - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT \ No newline at end of file diff --git a/bootloaders/caterina_LUFA/makefile b/bootloaders/caterina_LUFA/makefile deleted file mode 100755 index 5439b5b..0000000 --- a/bootloaders/caterina_LUFA/makefile +++ /dev/null @@ -1,717 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = atmega32u4 - - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USER - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Starting byte address of the bootloader, as a byte address - computed via the formula -# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024) -# -# Note that the bootloader size and start address given in AVRStudio is in words and not -# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. -FLASH_SIZE_KB = 32 -BOOT_SECTION_SIZE_KB = 4 -BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc) - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = Caterina - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# Path to the LUFA library -LUFA_PATH = ../../../../../LUFA-111009 - - -# LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS - -#LUFA_OPTS += -D NO_BLOCK_SUPPORT -#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT -#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT -#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT - - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - Descriptors.c \ - $(LUFA_SRC_USB) \ - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=c99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -CDEFS += -DF_USB=$(F_USB)UL -CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) -CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL -CDEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) -ADEFS += -DF_USB=$(F_USB)UL -ADEFS += -DBOARD=BOARD_$(BOARD) -ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL -ADEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -CPPDEFS += -DF_USB=$(F_USB)UL -CPPDEFS += -DBOARD=BOARD_$(BOARD) -CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL -CPPDEFS += $(LUFA_OPTS) -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fno-inline-small-functions -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -fno-strict-aliasing -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = avrispmkII - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = usb - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = /Applications/avrdude -C /Applications/avrdude.conf -B 1 -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - -doxygen: - @echo Generating Project Documentation \($(TARGET)\)... - @doxygen Doxygen.conf - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -checksource: - @for f in $(SRC) $(CPPSRC) $(ASRC); do \ - if [ -f $$f ]; then \ - echo "Found Source File: $$f" ; \ - else \ - echo "Source File Not Found: $$f" ; \ - fi; done - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff doxygen clean \ -clean_list clean_doxygen program debug gdb-config checksource -